Go mod tidy

1 files changed, 0 insertions, 215 deletions

diff --git a/vendor/google.golang.org/grpc/internal/transport/flowcontrol.go b/vendor/google.golang.org/grpc/internal/transport/flowcontrol.go
deleted file mode 100644
index 97198c5..0000000
--- a/vendor/google.golang.org/grpc/internal/transport/flowcontrol.go
+++ /dev/null
@@ -1,215 +0,0 @@
-/*
- *
- * Copyright 2014 gRPC authors.
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *
- */
-
-package transport
-
-import (
-	"fmt"
-	"math"
-	"sync"
-	"sync/atomic"
-)
-
-// writeQuota is a soft limit on the amount of data a stream can
-// schedule before some of it is written out.
-type writeQuota struct {
-	quota int32
-	// get waits on read from when quota goes less than or equal to zero.
-	// replenish writes on it when quota goes positive again.
-	ch chan struct{}
-	// done is triggered in error case.
-	done <-chan struct{}
-	// replenish is called by loopyWriter to give quota back to.
-	// It is implemented as a field so that it can be updated
-	// by tests.
-	replenish func(n int)
-}
-
-func newWriteQuota(sz int32, done <-chan struct{}) *writeQuota {
-	w := &writeQuota{
-		quota: sz,
-		ch:    make(chan struct{}, 1),
-		done:  done,
-	}
-	w.replenish = w.realReplenish
-	return w
-}
-
-func (w *writeQuota) get(sz int32) error {
-	for {
-		if atomic.LoadInt32(&w.quota) > 0 {
-			atomic.AddInt32(&w.quota, -sz)
-			return nil
-		}
-		select {
-		case <-w.ch:
-			continue
-		case <-w.done:
-			return errStreamDone
-		}
-	}
-}
-
-func (w *writeQuota) realReplenish(n int) {
-	sz := int32(n)
-	a := atomic.AddInt32(&w.quota, sz)
-	b := a - sz
-	if b <= 0 && a > 0 {
-		select {
-		case w.ch <- struct{}{}:
-		default:
-		}
-	}
-}
-
-type trInFlow struct {
-	limit               uint32
-	unacked             uint32
-	effectiveWindowSize uint32
-}
-
-func (f *trInFlow) newLimit(n uint32) uint32 {
-	d := n - f.limit
-	f.limit = n
-	f.updateEffectiveWindowSize()
-	return d
-}
-
-func (f *trInFlow) onData(n uint32) uint32 {
-	f.unacked += n
-	if f.unacked >= f.limit/4 {
-		w := f.unacked
-		f.unacked = 0
-		f.updateEffectiveWindowSize()
-		return w
-	}
-	f.updateEffectiveWindowSize()
-	return 0
-}
-
-func (f *trInFlow) reset() uint32 {
-	w := f.unacked
-	f.unacked = 0
-	f.updateEffectiveWindowSize()
-	return w
-}
-
-func (f *trInFlow) updateEffectiveWindowSize() {
-	atomic.StoreUint32(&f.effectiveWindowSize, f.limit-f.unacked)
-}
-
-func (f *trInFlow) getSize() uint32 {
-	return atomic.LoadUint32(&f.effectiveWindowSize)
-}
-
-// TODO(mmukhi): Simplify this code.
-// inFlow deals with inbound flow control
-type inFlow struct {
-	mu sync.Mutex
-	// The inbound flow control limit for pending data.
-	limit uint32
-	// pendingData is the overall data which have been received but not been
-	// consumed by applications.
-	pendingData uint32
-	// The amount of data the application has consumed but grpc has not sent
-	// window update for them. Used to reduce window update frequency.
-	pendingUpdate uint32
-	// delta is the extra window update given by receiver when an application
-	// is reading data bigger in size than the inFlow limit.
-	delta uint32
-}
-
-// newLimit updates the inflow window to a new value n.
-// It assumes that n is always greater than the old limit.
-func (f *inFlow) newLimit(n uint32) {
-	f.mu.Lock()
-	f.limit = n
-	f.mu.Unlock()
-}
-
-func (f *inFlow) maybeAdjust(n uint32) uint32 {
-	if n > uint32(math.MaxInt32) {
-		n = uint32(math.MaxInt32)
-	}
-	f.mu.Lock()
-	defer f.mu.Unlock()
-	// estSenderQuota is the receiver's view of the maximum number of bytes the sender
-	// can send without a window update.
-	estSenderQuota := int32(f.limit - (f.pendingData + f.pendingUpdate))
-	// estUntransmittedData is the maximum number of bytes the sends might not have put
-	// on the wire yet. A value of 0 or less means that we have already received all or
-	// more bytes than the application is requesting to read.
-	estUntransmittedData := int32(n - f.pendingData) // Casting into int32 since it could be negative.
-	// This implies that unless we send a window update, the sender won't be able to send all the bytes
-	// for this message. Therefore we must send an update over the limit since there's an active read
-	// request from the application.
-	if estUntransmittedData > estSenderQuota {
-		// Sender's window shouldn't go more than 2^31 - 1 as specified in the HTTP spec.
-		if f.limit+n > maxWindowSize {
-			f.delta = maxWindowSize - f.limit
-		} else {
-			// Send a window update for the whole message and not just the difference between
-			// estUntransmittedData and estSenderQuota. This will be helpful in case the message
-			// is padded; We will fallback on the current available window(at least a 1/4th of the limit).
-			f.delta = n
-		}
-		return f.delta
-	}
-	return 0
-}
-
-// onData is invoked when some data frame is received. It updates pendingData.
-func (f *inFlow) onData(n uint32) error {
-	f.mu.Lock()
-	f.pendingData += n
-	if f.pendingData+f.pendingUpdate > f.limit+f.delta {
-		limit := f.limit
-		rcvd := f.pendingData + f.pendingUpdate
-		f.mu.Unlock()
-		return fmt.Errorf("received %d-bytes data exceeding the limit %d bytes", rcvd, limit)
-	}
-	f.mu.Unlock()
-	return nil
-}
-
-// onRead is invoked when the application reads the data. It returns the window size
-// to be sent to the peer.
-func (f *inFlow) onRead(n uint32) uint32 {
-	f.mu.Lock()
-	if f.pendingData == 0 {
-		f.mu.Unlock()
-		return 0
-	}
-	f.pendingData -= n
-	if n > f.delta {
-		n -= f.delta
-		f.delta = 0
-	} else {
-		f.delta -= n
-		n = 0
-	}
-	f.pendingUpdate += n
-	if f.pendingUpdate >= f.limit/4 {
-		wu := f.pendingUpdate
-		f.pendingUpdate = 0
-		f.mu.Unlock()
-		return wu
-	}
-	f.mu.Unlock()
-	return 0
-}