| Age | Commit message (Collapse) | Author |
|---|
|
Previously if you configured a different timestamp precision then
`make check` would fail as the non-default config is generated and
fails test_cli config file comparison.
Signed-off-by: Christian Hopps <chopps@labn.net>
|
|
Move the various destinations handling into lib/memory.c, include
"normal" logging as target, and make `ACTIVEATEXIT` properly non-error
as it was intended to be.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Mgmtd makes use of libyang's internal ietf-yang-library module to add
support for said module to FRR management. Previously, mgmtd was loading
this module explicitly; however, that required that libyang's
`ietf-yang-library.yang` module definition file be co-located with FRR's
yang files so that it (and ietf-datastore.yang) would be found when
searched for by libyang using FRRs search path. This isn't always the
case depending on how the user compiles and installs libyang so mgmtd
was failing to run in some cases.
Instead of doing it the above way we simply tell libyang to load it's
internal version of ietf-yang-library when we initialize the libyang
context.
This required adding a boolean to a couple of the init functions which
is why so many files are touched (although all the changes are minimal).
Signed-off-by: Christian Hopps <chopps@labn.net>
|
|
Implement common code for debug config output and remove daemon-specific
code that is duplicated everywhere.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
|
|
The debug library allows to register a `debug_set_all` callback which
should enable all debugs in a daemon. This callback is implemented
exactly the same in each daemon. Instead of duplicating the code, rework
the lib to allow registration of each debug type, and implement the
common code only once in the lib.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
|
|
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
We should probably prevent any type of namespace collision
with something else.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
Let's find a better name for it.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
Convert the `struct thread_master` to `struct event_master`
across the code base.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
Effectively a massive search and replace of
`struct thread` to `struct event`. Using the
term `thread` gives people the thought that
this event system is a pthread when it is not
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
This is a first in a series of commits, whose goal is to rename
the thread system in FRR to an event system. There is a continual
problem where people are confusing `struct thread` with a true
pthread. In reality, our entire thread.c is an event system.
In this commit rename the thread.[ch] files to event.[ch].
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
Done with a combination of regex'ing and banging my head against a wall.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
common_cli.c disables logging by default so stdio is usable as vty
without log messages getting strewn inbetween. This the right thing for
most tests, but not all; sometimes we do want log messages.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
There's no more difference between number-named and word-named access-lists.
This commit removes separate arguments for number-named ACLs from CLI.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
|
|
|
|
This allows defining a CLI command like this:
`[no] some setting ![VALUE]`
with VALUE being optional for the "no" form, but required for the
positive form. It's just a `[...]` where the empty branch can only be
taken for commands starting with `no`.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
There is a possibility that the same line can be matched as a command in
some node and its parent node. In this case, when reading the config,
this line is always executed as a command of the child node.
For example, with the following config:
```
router ospf
network 193.168.0.0/16 area 0
!
mpls ldp
discovery hello interval 111
!
```
Line `mpls ldp` is processed as command `mpls ldp-sync` inside the
`router ospf` node. This leads to a complete loss of `mpls ldp` node
configuration.
To eliminate this issue and all possible similar issues, let's print an
explicit "exit" at the end of every node config.
This commit also changes indentation for a couple of existing exit
commands so that all existing commands are on the same level as their
corresponding node-entering commands.
Fixes #9206.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
|
|
Since the common CLI code calls nb_init, allow specifying some modules
to load by overriding test_yang_models.
Signed-off-by: David Lamparter <equinox@diac24.net>
|
|
Compile with v2.0.0 tag of `libyang2` branch of:
https://github.com/CESNET/libyang
staticd init load time of 10k routes now 6s vs ly1 time of 150s
Signed-off-by: Christian Hopps <chopps@labn.net>
|
|
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
|
|
We are now using black.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
|
|
In case of config rollback is enabled,
record northbound transaction based on a control flag.
The actual frr daemons would set the flag to true via
nb_init from frr_init.
This will allow test daemon to bypass recording
transacation to db.
Signed-off-by: Chirag Shah <chirag@nvidia.com>
|
|
*: clean up the mess that is CLI command nodes
|
|
logging subsystem rewrite
|
|
And again for the name. Why on earth would we centralize this, just so
people can forget to update it?
Signed-off-by: David Lamparter <equinox@diac24.net>
|
|
Same as before, instead of shoving this into a big central list we can
just put the parent node in cmd_node.
Signed-off-by: David Lamparter <equinox@diac24.net>
|
|
There is really no reason to not put this in the cmd_node.
And while we're add it, rename from pointless ".func" to ".config_write".
[v2: fix forgotten ldpd config_write]
Signed-off-by: David Lamparter <equinox@diac24.net>
|
|
... and use named assignments everywhere (so I can change the struct.)
Signed-off-by: David Lamparter <equinox@diac24.net>
|
|
Our two northbound tools don't have embedded YANG modules like the
other FRR binaries. As such, ly_ctx_set_module_imp_clb() shouldn't be
called when the YANG subsystem it being initialized by a northbound
tool. To make that possible, add a new "embedded_modules" parameter
to the yang_init() function to control whether libyang should look
for embedded modules or not.
With this fix, "gen_northbound_callbacks" and "gen_yang_deviations"
won't emit "YANG model X not embedded, trying external file"
warnings anymore.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
|
|
This is a full rewrite of the "back end" logging code. It now uses a
lock-free list to iterate over logging targets, and the targets
themselves are as lock-free as possible. (syslog() may have a hidden
internal mutex in the C library; the file/fd targets use a single
write() call which should ensure atomicity kernel-side.)
Note that some functionality is lost in this patch:
- Solaris printstack() backtraces are ditched (unlikely to come back)
- the `log-filter` machinery is gone (re-added in followup commit)
- `terminal monitor` is temporarily stubbed out. The old code had a
race condition with VTYs going away. It'll likely come back rewritten
and with vtysh support.
- The `zebra_ext_log` hook is gone. Instead, it's now much easier to
add a "proper" logging target.
v2: TLS buffer to get some actual performance
Signed-off-by: David Lamparter <equinox@diac24.net>
|
|
And memory_init() to lib_cmd_init().
Signed-off-by: David Lamparter <equinox@diac24.net>
|
|
The correct cast for these is (unsigned char), because "char" could be
signed and thus have some negative value. isalpha & co. expect an int
arg that is positive, i.e. 0-255. So we need to cast to (unsigned char)
when calling any of these.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Add 'no log commands' cli and at the same time add a
--command-log-always to the daemon startup cli.
If --command-log-always is specified then all commands are
auto-logged and the 'no log commands' form of the command
is now ignored.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
|
|
[master] build reproducibility
|
|
These are causing random test failures when the host's domainname is
actually set to something (as opposed to empty/unset, which it is 99% of
times.)
Signed-off-by: David Lamparter <equinox@diac24.net>
|
|
Confirmed commits allow the user to request an automatic rollback to
the previous configuration if the commit operation is not confirmed
within a number of minutes. This is particularly useful when the user
is accessing the CLI through the network (e.g. using SSH) and any
configuration change might cause an unexpected loss of connectivity
between the user and the managed device (e.g. misconfiguration of a
routing protocol). By using a confirmed commit, the user can rest
assured the connectivity will be restored after the given timeout
expires, avoiding the need to access the router physically to fix
the problem.
When "commit confirmed TIMEOUT" is used, a new "commit" command is
expected to confirm the previous commit before the given timeout
expires. If "commit confirmed TIMEOUT" is used while there's already
a confirmed-commit in progress, the confirmed-commit timeout is
reset to the new value.
In the current implementation, if other users perform commits while
there's a confirmed-commit in progress, all commits are rolled back
when the confirmed-commit timeout expires. It's recommended to use
the "configure exclusive" configuration mode to prevent unexpected
outcomes when using confirmed commits.
When an user exits from the configuration mode while there's a
confirmed-commit in progress, the commit is automatically rolled
back and the user is notified about it. In the future we might
want to prompt the user if he or she really wants to exit from the
configuration mode when there's a pending confirmed commit.
Needless to say, confirmed commit only work for configuration
commands converted to the new northbound model. vtysh support will
be implemented at a later time.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
|
|
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
|
|
This fixes all remaining local variable shadowing cases
Signed-off-by: F. Aragon <paco@voltanet.io>
|
|
test_cli.refout is written by configure into the build directory, thus
we need a little special glue to find it correctly.
Signed-off-by: David Lamparter <equinox@diac24.net>
|
|
May SUBDIRS rest in pieces... er, peace.
Signed-off-by: David Lamparter <equinox@diac24.net>
|
|
I see lots of the same code being copy-pasted and slightly tweaked for
string processing all over the codebase. Time to start aggregating these
pieces into something consistent and correct.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
|
|
add reference output & run the test with proper libs and such.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
adds a new all-daemon "debug memstats-at-exit" command. Also saves
memstats to a file in /tmp, useful if a long-running daemon is having
weird issues (e.g. in a user install).
Fixes: #437
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
A mismatch between the make rule and the include path causes dependency
tracking to try to build the clippy.c file twice (at the same time),
which results in spurious build failures.
Fixes: #971
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
- SIGTSTP appropriately suspends the foreground terminal
- SIGINT causes the daemon to exit, regardless of -d
- SIGQUIT causes the daemon to daemonize, regardless of -d
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
This reverts commit c14777c6bfd0a446c85243d3a9835054a259c276.
clang 5 is not widely available enough for people to indent with. This
is particularly problematic when rebasing/adjusting branches.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
w/ clang 5
* reflow comments
* struct members go 1 per line
* binpack algo was adjusted
|
|
indent.py `git ls-files | pcregrep '\.[ch]$' | pcregrep -v '^(ldpd|babeld|nhrpd)/'`
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
