| Age | Commit message (Collapse) | Author |
|---|
|
When the IGMP group source limit is reached the function
`igmp_get_source_by_addr` won't return a `struct gm_source` so we must
test for that condition before attempting to access its fields.
Fixes coverity scan issue 1637406.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
|
|
(Somewhat) useful when dealing with an interface that has only one host
attached. Only works for IGMPv2 and MLDv1, other protocol versions have
no leave message.
Co-authored-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
|
|
For groups we can just look at the length of the list, for sources we
need to count them on a per-interface level.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Rather than storing the prefix-list name and looking it up every time we use it, store a pointer to the prefix-list itself.
Signed-off-by: Corey Siltala <csiltala@atcorp.com>
|
|
Add new interface command ip multicast boundary ACCESSLIST4_NAME. This
allows filtering on both source and group using the extended access-list
syntax vs. group-only as with the existing "ip multicast boundary oil"
command, which uses prefix-lists. If both are configured, the prefix-
list is evaluated first. The default behavior for both prefix-lists and
access-lists remains "deny", so the prefix-list must have a terminating
"permit" statement in order to also evaluate against the access-list.
The following example denies groups in range 229.1.1.0/24 and groups in
range 232.1.1.0/24 with source 10.0.20.2:
!
ip prefix-list pim-oil-plist seq 10 deny 229.1.1.0/24
ip prefix-list pim-oil-plist seq 20 permit any
!
access-list pim-acl seq 10 deny ip host 10.0.20.2 232.1.1.0 0.0.0.255
access-list pim-acl seq 20 permit ip any any
!
interface r1-eth0
ip address 10.0.20.1/24
ip igmp
ip pim
ip multicast boundary oil pim-oil-plist
ip multicast boundary pim-acl
!
Signed-off-by: Corey Siltala <csiltala@atcorp.com>
|
|
There is no reason to call `igmp_anysource_forward_stop()` inside a call to
`igmp_get_source_by_addr()`; not only it is not expected for a "get" function
to perform such an action, but also the decision to start/stop forwarding is
already handled correctly by pim outside `igmp_get_source_by_addr()`.
That call was left there from the days pim was initially imported into the sources.
The problem/crash was happening because `igmp_find_source_by_addr()` would fail to
find the group/source combo when mixing `(*, G)` and `(S, G)`. When having an existing
flow `(*, G)`, and a new `(S, G)` igmp is received, a new entry is correctly created.
`igmp_anysource_forward_stop(group)` always stops and eventually frees `(*, G)`, even
when the new igmp is `(S, G)`, leaving a bad state. I.e, the new entry for `(S, G)`
causes `(*, G)` to be deleted.
Tested the fix with multiple receivers on the same interface with several ssm and
any source senders and receivers with various combination of start/stop orders and
they all worked correctly.
Fixes: #15630
Signed-off-by: Jafar Al-Gharaibeh <jafar@atcorp.com>
|
|
This API is no more in use.
Signed-off-by: Sarita Patra <saritap@vmware.com>
|
|
Receiver---LHR---RP
Problem:
In LHR, ipv6 pim state remains after MLD prune received.
Root Cause:
When LHR receives join, it creates (*,G) channel oil with
oil_ref_count = 2. The channel_oil is used by gm_sg sg->oil
and upstream->channel_oil.
When LHR receives prune, currently upstream->channel_oil is
deleted and gm_sg sg->oil still present. Due to this channel_oil
is still present with oil_ref_count = 1
Fix:
When LHR receives prune, upstream->channel_oil and pim_sg sg->oil
needs to be deleted.
Issue: #11249
Signed-off-by: Sarita Patra <saritap@vmware.com>
|
|
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
Effectively a massive search and replace of
`struct thread` to `struct event`. Using the
term `thread` gives people the thought that
this event system is a pthread when it is not
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
Done with a combination of regex'ing and banging my head against a wall.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Changed PIM_DEBUG_IGMP_TRACE to PIM_DEBUG_GM_TRACE and
PIM_DEBUG_IGMP_TRACE_DETAIL to PIM_DEBUG_GM_TRACE_DETAIL.
Hence, these macros can be used for both v6 and v4.
Issue: #11895
Co-authored-by: Sai Gomathi N <nsaigomathi@vmware.com>
Signed-off-by: Abhishek N R <abnr@vmware.com>
|
|
PIM_DEBUG_GM_PACKETS
Changing the macros to common so that it can be used for pimv6 debugs as well
to be used for both IGMP and MLD debugs.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
|
|
Changing the macros to common so that it can be used for pimv6 debugs as well
to be used for both IGMP and MLD debugs.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
|
|
pimd is receiving v3 igmp packets on an interface that is setup as v2 and
causing the igmp group as configured on that interface to get a bit
wonky.
Add a check to receiving v3 packets and to drop the packet if the
igmp version configed on the interface is 2.
Fixes: #11105
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
This is causing build issues on BSD by including (transitively)
`linux/mroute6.h` - try to address by disentangling the headers a bunch.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
5421bf8 commit forgot to set the parameter "new" to true
when a new source is created, have fixed it.
igmp_get_source_by_addr api is currently setting the parameter
"new" to false always. This is not right. The caller apis are using
this field to decide and based on that take actions to create timers, etc.
Its need to be set to true when a new source is created.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
|
|
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
pimd : Handling of Exclude mode IGMPv3 report messages for SSM aware group.
|
|
```
exit1-debian-11# sh ip igmp statistics
IGMP statistics
Interface : global
V1 query : 0
V2 query : 0
V3 query : 6
V2 leave : 0
V1 report : 0
V2 report : 0
V3 report : 14
mtrace response : 0
mtrace request : 0
unsupported : 0
joins failed : 0
joins sent : 16
general queries sent : 6
group queries sent : 4
total groups : 5
total source groups : 1
exit1-debian-11# sh ip igmp statistics json
{
"global":{
"name":"global",
"queryV1":0,
"queryV2":0,
"queryV3":6,
"leaveV2":0,
"reportV1":0,
"reportV2":0,
"reportV3":18,
"mtraceResponse":0,
"mtraceRequest":0,
"unsupported":0,
"totalGroups":5,
"totalSourceGroups":1,
"joinsFailed":0,
"joinsSent":16,
"generalQueriesSent":6,
"groupQueriesSent":4
}
}
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
|
|
```
exit1-debian-11# sh ip igmp statistics
IGMP statistics
Interface : global
V1 query : 0
V2 query : 0
V3 query : 0
V2 leave : 0
V1 report : 0
V2 report : 0
V3 report : 16
mtrace response : 0
mtrace request : 0
unsupported : 0
joins failed : 0
joins sent : 11
total groups : 4
total source groups : 0
exit1-debian-11# sh ip igmp statistics json
{
"global":{
"name":"global",
"queryV1":0,
"queryV2":0,
"queryV3":0,
"leaveV3":0,
"reportV1":0,
"reportV2":0,
"reportV3":16,
"mtraceResponse":0,
"mtraceRequest":0,
"unsupported":0,
"totalGroups":4,
"totalSourceGroups":0,
"joinsFailed":0,
"joinsSent":11
}
}
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
|
|
The int return value is never used. Modify the code
base to just return a void instead.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
Problem Statement:
==================
(rcv1)-----A----B---C
v3 enabled with src 90.0.0.1
|
(rcv2)--
v3 enable with src none
rcv1 sends the packet in INCLUDE mode, rcv2 sends the IGMP report
in exclude mode. As per the state machine the group structure was
getting added and deleted. As group gets deleted the mroute for 90.0.0.1
and recreated back.
This effects the end to end trafiic.
Root Cause Analysis:
====================
As per state machine
INCLUDE (A) IS_EX (B) EXCLUDE (A*B,B-A) (B-A)=0
Delete (A-B)
Group Timer=GMI
EXCLUDE (X,Y) TO_EX (A) EXCLUDE (A-Y,Y*A) (A-X-Y)=Group Timer
Delete (X-A)
Delete (Y-A)
Send Q(G,A-Y)
Group Timer=GMI
The above equations were getiing calulated for IP address
90.0.0.1 and 0.0.0.0
This results in group creation deletion.
Fix:
====
As per RFC 4604.
drop the exclude mode, IGMP reports, if destnation group is
SSM based.
EXCLUDE
mode does not apply to SSM addresses, and an SSM-aware router will
ignore MODE_IS_EXCLUDE and CHANGE_TO_EXCLUDE_MODE requests in the SSM
range.
Signed-off-by: Abhishek N R <abnr@vmware.com>
Signed-off-by: Vishal Dhingra <rac.vishaldhingra@gmail.com>
|
|
These really don't serve much of a purpose, especially with how
inconsistently they're used.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Modifying the members of pim_interface which are to be used
for both IPv4 and IPv6 to common names(for both MLD and IGMP).
Issues: #10023
Co-authored-by: Mobashshera Rasool <mrasool@vmware.com>
Co-authored-by: Sarita Patra <saritap@vmware.com>
Signed-off-by: Sai Gomathi <nsaigomathi@vmware.com>
|
|
Revert "pimd: Modifying members of pim_interface to accommodate IPv6 changes"
|
|
|
|
Modifying name of struct igmp_sock to struct gm_sock, which is to be used
by both IPv4 and IPv6(for both MLD and IGMP).
Co-authored-by: Mobashshera Rasool <mrasool@vmware.com>
Co-authored-by: Sarita Patra <saritap@vmware.com>
Signed-off-by: Sai Gomathi <nsaigomathi@vmware.com>
|
|
Modifying name of struct igmp_group to struct gm_group, which is to be used
by both IPv4 and IPv6(for both MLD and IGMP).
Co-authored-by: Mobashshera Rasool <mrasool@vmware.com>
Co-authored-by: Sarita Patra <saritap@vmware.com>
Signed-off-by: Sai Gomathi <nsaigomathi@vmware.com>
|
|
Modifying name of struct igmp_source to struct gm_source, which is to be used
by both IPv4 and IPv6(for both MLD and IGMP).
Co-authored-by: Mobashshera Rasool <mrasool@vmware.com>
Co-authored-by: Sarita Patra <saritap@vmware.com>
Signed-off-by: Sai Gomathi <nsaigomathi@vmware.com>
|
|
Modifying the members of pim_interface which are to be used
for both IPv4 and IPv6 to common names(for both MLD and IGMP).
Issue: #10023
Co-authored-by: Mobashshera Rasool <mrasool@vmware.com>
Signed-off-by: Sai Gomathi <nsaigomathi@vmware.com>
|
|
This makes a lot more sense semantically (and matches the way groups are
handled.) Also allows placing additional restrictions on source
creation (e.g. limit on number of sources or ACLs.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Intentionally separate here because the previous patch does a whole
bunch of "move stuff up 1 level of indentation", and reviewing that is
easier when you can use the ignore-whitespace option on diff.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
IGMP group/source memberships are a property of the interface; the
particular IP address that the querier used to collect the data is
irrelevant.
... and IGMP packets get delivered only once to pimd anyway, since we
receive them on the "global" per-VRF IGMP socket. (The one in igmp_sock
is only used for sending queries.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Signed-off-by: Jafar Al-Gharaibeh <jafar@atcorp.com>
|
|
Problem :
=======
When all the groups from Ixia are stopped,
groups still keep refreshing and not getting timeout
RCA:
====
IGMP Report is coming in include mode without any source address, this problem will come.
Fix :
===
If the requested filter mode is INCLUDE *and* the requested
source list is empty, then the entry corresponding to the
requested interface and multicast address is deleted if present.
If no such entry is present, the request is ignored.
When an interface receives the IGMP report without any source, then the group is deleted.
Signed-off-by: Sai Gomathi <nsaigomathi@vmware.com>
|
|
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
|
|
No point in having pimd use zassert() while everything else uses plain
assert().
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Issue: When an IGMPv2 leave packet is received, it did not validate
the checksum and hence the packet is accepted and group specific
query is sent out in response to this.
Due to this IGMP conformance test case 6.1 failed.
https://github.com/FRRouting/frr/issues/6868
Fix: Validate the checksum for all IGMP packets
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
|
|
Replace all use of inet_ntoa, using %pI4 or inet_ntoa instead
Signed-off-by: Mark Stapp <mjs@voltanet.io>
|
|
Replace sprintf with snprintf where straightforward to do so.
- sprintf's into local scope buffers of known size are replaced with the
equivalent snprintf call
- snprintf's into local scope buffers of known size that use the buffer
size expression now use sizeof(buffer)
- sprintf(buf + strlen(buf), ...) replaced with snprintf() into temp
buffer followed by strlcat
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
|
|
FINISH IT
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
|
|
Just keep the code cool.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
|
|
When receiving igmp packets we are spitting out a lot of
debugs. Attempt to clean this up to allow us to understand
what is going on a bit better by just being able to look
at the log file.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
|
|
Add some debugs so we can see channel oil creation and deletion
events.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
|
|
Introduce new cli commands ip igmp last-member-query-count <1-7>
ip igmp last-member-query-interval <1-255> deciseconds.
Display the config in show running config and show ip igmp interface
Signed-off-by: Sarita Patra <saritap@vmware.com>
|
|
Create a `struct pim_router` and move the thread master into it.
Future commits will further move global varaibles into the pim_router
structure.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
|
|
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
|
