diff options
Diffstat (limited to 'doc/developer/building-frr-on-ubuntu1204.rst')
| -rw-r--r-- | doc/developer/building-frr-on-ubuntu1204.rst | 187 |
1 files changed, 0 insertions, 187 deletions
diff --git a/doc/developer/building-frr-on-ubuntu1204.rst b/doc/developer/building-frr-on-ubuntu1204.rst deleted file mode 100644 index dad115acd8..0000000000 --- a/doc/developer/building-frr-on-ubuntu1204.rst +++ /dev/null @@ -1,187 +0,0 @@ -Ubuntu 12.04LTS -=============================================== - -- MPLS is not supported on ``Ubuntu 12.04`` with default kernel. MPLS - requires Linux Kernel 4.5 or higher (LDP can be built, but may have - limited use without MPLS) For an updated Ubuntu Kernel, see - http://kernel.ubuntu.com/~kernel-ppa/mainline/ - -Install required packages -------------------------- - -Add packages: - -:: - - apt-get install \ - git autoconf automake libtool make gawk libreadline-dev texinfo \ - dejagnu pkg-config libpam0g-dev libjson0-dev flex python-pip \ - libc-ares-dev python3-dev python3-sphinx install-info - -Install newer bison from 14.04 package source (Ubuntu 12.04 package -source is too old) - -:: - - mkdir builddir - cd builddir - wget http://archive.ubuntu.com/ubuntu/pool/main/b/bison/bison_3.0.2.dfsg-2.dsc - wget http://archive.ubuntu.com/ubuntu/pool/main/b/bison/bison_3.0.2.dfsg.orig.tar.bz2 - wget http://archive.ubuntu.com/ubuntu/pool/main/b/bison/bison_3.0.2.dfsg-2.debian.tar.gz - tar -jxvf bison_3.0.2.dfsg.orig.tar.bz2 - cd bison-3.0.2.dfsg/ - tar xzf ../bison_3.0.2.dfsg-2.debian.tar.gz - sudo apt-get build-dep bison - debuild -b -uc -us - cd .. - sudo dpkg -i ./libbison-dev_3.0.2.dfsg-2_amd64.deb ./bison_3.0.2.dfsg-2_amd64.deb - cd .. - rm -rf builddir - -Install newer version of autoconf and automake: - -:: - - wget http://ftp.gnu.org/gnu/autoconf/autoconf-2.69.tar.gz - tar xvf autoconf-2.69.tar.gz - cd autoconf-2.69 - ./configure --prefix=/usr - make - sudo make install - cd .. - - wget http://ftp.gnu.org/gnu/automake/automake-1.15.tar.gz - tar xvf automake-1.15.tar.gz - cd automake-1.15 - ./configure --prefix=/usr - make - sudo make install - cd .. - -Install pytest: - -:: - - pip install pytest - -Get FRR, compile it and install it (from Git) ---------------------------------------------- - -**This assumes you want to build and install FRR from source and not -using any packages** - -Add frr groups and user -^^^^^^^^^^^^^^^^^^^^^^^ - -:: - - sudo groupadd -r -g 92 frr - sudo groupadd -r -g 85 frrvty - sudo adduser --system --ingroup frr --home /var/run/frr/ \ - --gecos "FRR suite" --shell /sbin/nologin frr - sudo usermod -a -G frrvty frr - -Download Source, configure and compile it -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -(You may prefer different options on configure statement. These are just -an example.) - -:: - - git clone https://github.com/frrouting/frr.git frr - cd frr - ./bootstrap.sh - ./configure \ - --prefix=/usr \ - --enable-exampledir=/usr/share/doc/frr/examples/ \ - --localstatedir=/var/run/frr \ - --sbindir=/usr/lib/frr \ - --sysconfdir=/etc/frr \ - --enable-pimd \ - --enable-watchfrr \ - --enable-ospfclient=yes \ - --enable-ospfapi=yes \ - --enable-multipath=64 \ - --enable-user=frr \ - --enable-group=frr \ - --enable-vty-group=frrvty \ - --enable-configfile-mask=0640 \ - --enable-logfile-mask=0640 \ - --enable-rtadv \ - --enable-fpm \ - --with-pkg-git-version \ - --with-pkg-extra-version=-MyOwnFRRVersion - make - make check - sudo make install - -Create empty FRR configuration files -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -:: - - sudo install -m 755 -o frr -g frr -d /var/log/frr - sudo install -m 775 -o frr -g frrvty -d /etc/frr - sudo install -m 640 -o frr -g frr /dev/null /etc/frr/zebra.conf - sudo install -m 640 -o frr -g frr /dev/null /etc/frr/bgpd.conf - sudo install -m 640 -o frr -g frr /dev/null /etc/frr/ospfd.conf - sudo install -m 640 -o frr -g frr /dev/null /etc/frr/ospf6d.conf - sudo install -m 640 -o frr -g frr /dev/null /etc/frr/isisd.conf - sudo install -m 640 -o frr -g frr /dev/null /etc/frr/ripd.conf - sudo install -m 640 -o frr -g frr /dev/null /etc/frr/ripngd.conf - sudo install -m 640 -o frr -g frr /dev/null /etc/frr/pimd.conf - sudo install -m 640 -o frr -g frr /dev/null /etc/frr/ldpd.conf - sudo install -m 640 -o frr -g frr /dev/null /etc/frr/nhrpd.conf - sudo install -m 640 -o frr -g frrvty /dev/null /etc/frr/vtysh.conf - -Enable IP & IPv6 forwarding -^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -Edit ``/etc/sysctl.conf`` and uncomment the following values (ignore the -other settings) - -:: - - # Uncomment the next line to enable packet forwarding for IPv4 - net.ipv4.ip_forward=1 - - # Uncomment the next line to enable packet forwarding for IPv6 - # Enabling this option disables Stateless Address Autoconfiguration - # based on Router Advertisements for this host - net.ipv6.conf.all.forwarding=1 - -**Reboot** or use ``sysctl -p`` to apply the same config to the running -system - -Install the init.d service -^^^^^^^^^^^^^^^^^^^^^^^^^^ - -:: - - sudo install -m 755 tools/frr /etc/init.d/frr - sudo install -m 644 tools/etc/frr/daemons /etc/frr/daemons - sudo install -m 644 -o frr -g frr tools/etc/frr/vtysh.conf /etc/frr/vtysh.conf - -Enable daemons -^^^^^^^^^^^^^^ - -| Edit ``/etc/frr/daemons`` and change the value from "no" to "yes" for - those daemons you want to start by systemd. -| For example. - -:: - - zebra=yes - bgpd=yes - ospfd=yes - ospf6d=yes - ripd=yes - ripngd=yes - isisd=yes - -Start the init.d service -^^^^^^^^^^^^^^^^^^^^^^^^ - -- /etc/init.d/frr start -- use ``/etc/init.d/frr status`` to check its status. |