zebra: print rmac and sys mac values

"show vrf vni" and "show evpn vni <l3vni>" commands
need to display correct router mac value.

"show evpn vni <l3vni>" detail l3vni needs to display
system mac as in PIP scenario value can be different.
Syste MAC would be derived from SVI interface MAC wherelse
Router MAC would be derived from macvlan interface MAC value.

Ticket:CM-26710
Reviewed By:CCR-9334
Testing Done:

TORC11# show evpn vni 4001
VNI: 4001
  Type: L3
  Tenant VRF: vrf1
  Local Vtep Ip: 36.0.0.11
  Vxlan-Intf: vx-4001
  SVI-If: vlan4001
  State: Up
  VNI Filter: none
  System MAC: 00:02:00:00:00:2e
  Router MAC: 44:38:39:ff:ff:01
  L2 VNIs: 1000
TORC11# show vrf vni
VRF     VNI    VxLAN IF   L3-SVI    State Rmac
vrf1    4001   vx-4001    vlan4001  Up    44:38:39:ff:ff:01

TORC11# show evpn vni 4001 json
{
  "vni":4001,
  "type":"L3",
  "localVtepIp":"36.0.0.11",
  "vxlanIntf":"vx-4001",
  "sviIntf":"vlan4001",
  "state":"Up",
  "vrf":"vrf1",
  "sysMac":"00:02:00:00:00:2e",
  "routerMac":"44:38:39:ff:ff:01",
  "vniFilter":"none",
  "l2Vnis":[
    1000,
  ]
}

Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>

0 files changed, 0 insertions, 0 deletions