| Age | Commit message (Collapse) | Author |
|---|
|
Allow the retrieval of ipv6 forwarding state from
within the yang framework as that it was missing.
Signed-off-by: Donna Sharp <dksharp5@gmail.com>
|
|
There was no ability to retrieve the ip-forwarding state
of zebra. Add this to yang under the state container.
Signed-off-by: Donna Sharp <dksharp5@gmail.com>
|
|
required stream size is evaluated as a fix part and variable one.
the variable one depend on the number of nexthops.
Signed-off-by: Francois Dumontet <francois.dumontet@6wind.com>
|
|
fabricd: add option to treat dummy interfaces as loopback interfaces
|
|
In order to configure an SRv6 uA SID in staticd, staticd should request
SRv6 SID Manager to allocate a SID bound to the uA behavior.
Currently, `static_zebra_request_srv6_sid` does not support requesting
SIDs bound to the uA behavior.
This commit extends the `static_zebra_request_srv6_sid` function to
enable staticd to request SIDs bound to the uA behavior.
Signed-off-by: Carmine Scarpitta <cscarpit@cisco.com>
|
|
Introduce ZEBRA_IF_DUMMY interface flag to identify Linux dummy interfaces [0].
These interfaces behave similarly to loopback interfaces and can be
specially handled by daemons.
[0]: https://github.com/torvalds/linux/blob/master/drivers/net/dummy.c
Signed-off-by: Gabriel Goller <g.goller@proxmox.com>
|
|
Signed-off-by: Donna Sharp <dksharp5@gmail.com>
|
|
The multipath number specified is not available through
the yang data and is not retrievable. Make it so.
At this point in time do not allow this to be set from
yang. Perhaps in the future.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
Headers include this stuff now. No need for it
in our code base.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
zebra: Do not flush an existing vni configuration trying to remove wrong vni
|
|
Changes allow ipv4 class E addresses and prefixes in the 240.0.0.0/4
range to be configured on interfaces, imported from the kernel routing
table and redistributed as connected routes in zebra by default.
Changes also fix routes with class E prefixes in kernel routing table
getting rejected by zebra during early daemon startup.
Drivin this change in default behavior are cloud providers (with
customers still using obsolete ipv4 protocol, i.e. Azure, AWS) running
out of ip space and abusing class E for addressing instances (announced
via BGP) over tunneling connections back to customers on premise
infrastructure.
Signed-off-by: David Schweizer <dschweizer@opensourcerouting.org>
|
|
Found some more instances of tableid not being
displayed when trying to debug something. Fix.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
Before:
```
pc.donatas.net(config)# do sh run | include vni
vni 1
pc.donatas.net(config)# no vni 2
pc.donatas.net(config)# do sh run | include vni
pc.donatas.net(config)#
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
|
|
Currently when the fpm_listener attempts to read say X
bytes it may only get Y( which is less than X ). In this
case we should assume that the dplane_fpm_nl code is just
being slow, as that we know it is possible for it to send
a partial fpm message. Let's just loosen the constraints
a bit and allow data to flow.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
Coverity 2024 new hotness
|
|
lib: actually hash all 16 bytes of IPv6 addresses, not just 4
|
|
Nexthop leak
|
|
The srv6 segment was being set but never freed
on the statically allocated nexthop.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
Fpm problems
|
|
This leak is happening:
Direct leak of 96 byte(s) in 2 object(s) allocated from:
0 0x7f6922eb83b7 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:77
1 0x7f6922a38ebb in qcalloc lib/memory.c:106
2 0x7f6922a553d6 in nexthop_add_srv6_seg6 lib/nexthop.c:652
3 0x562825e56b38 in parse_nexthop_unicast zebra/rt_netlink.c:589
4 0x562825e58c4a in netlink_route_change_read_unicast_internal zebra/rt_netlink.c:1291
5 0x562825e58eef in netlink_route_change_read_unicast zebra/rt_netlink.c:1321
6 0x562825e64921 in netlink_route_change zebra/rt_netlink.c:1494
7 0x562825e43407 in netlink_information_fetch zebra/kernel_netlink.c:407
8 0x562825e439b5 in netlink_parse_info zebra/kernel_netlink.c:1148
9 0x562825e44060 in kernel_read zebra/kernel_netlink.c:510
10 0x7f6922aeca72 in event_call lib/event.c:1984
11 0x7f6922a19e01 in frr_run lib/libfrr.c:1246
12 0x562825e4b0b9 in main zebra/main.c:543
13 0x7f692250c249 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
Just check to see if it has been allocated. The nexthop is a stack
variable so it's a bit odd.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
lib: Remove System routes from ip protocol route map choices
|
|
zebra: Ensure dplane does not send work back to master at wrong time
|
|
Upon zebra shutdown hash_clean_and_free is called
where user free function is passed,
The free function should not call hash_release
which lead to double free of hash bucket.
Fix:
The fix is to avoid calling hash_release from
free function if its called from hash_clean_and_free
path.
10 0x00007f0422b7df1f in free () from /lib/x86_64-linux-gnu/libc.so.6
11 0x00007f0422edd779 in qfree (mt=0x7f0423047ca0 <MTYPE_HASH_BUCKET>,
ptr=0x55fc8bc81980) at ../lib/memory.c:130
12 0x00007f0422eb97e2 in hash_clean (hash=0x55fc8b979a60,
free_func=0x55fc8a529478 <svd_nh_del_terminate>) at
../lib/hash.c:290
13 0x00007f0422eb98a1 in hash_clean_and_free (hash=0x55fc8a675920
<svd_nh_table>, free_func=0x55fc8a529478 <svd_nh_del_terminate>) at
../lib/hash.c:305
14 0x000055fc8a5323a5 in zebra_vxlan_terminate () at
../zebra/zebra_vxlan.c:6099
15 0x000055fc8a4c9227 in zebra_router_terminate () at
../zebra/zebra_router.c:276
16 0x000055fc8a4413b3 in zebra_finalize (dummy=0x7fffb881c1d0) at
../zebra/main.c:269
17 0x00007f0422f44387 in event_call (thread=0x7fffb881c1d0) at
../lib/event.c:2011
18 0x00007f0422ecb6fa in frr_run (master=0x55fc8b733cb0) at
../lib/libfrr.c:1243
19 0x000055fc8a441987 in main (argc=14, argv=0x7fffb881c4a8) at
../zebra/main.c:584
Signed-off-by: Chirag Shah <chirag@nvidia.com>
|
|
When looping through the dplane providers, the worklist was
being populated with items from the last provider and then
the event system was checked to see if we should stop processing.
If the event system says `yes` then the dplane code would stop
and send the worklist to the master zebra pthread for collection.
This obviously skipped the next dplane provider on the list
which is double plus not good.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
The mutex that wraps access to the output buffer
is being held for the entire time the data is
being generated to send down the pipe. Since
the generation has absolutely nothing to do
with the obuf, let's limit the mutex holding some.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
In fpm_listener, when a error is detected it would
stop listening and not recover. Modify the code
to close the socket and allow the connection to
recover.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
A recent code change 29122bc9b8d5317f6f486f9fe61a92a854948cc5
changed the passing of data up the fpm from passing the
tableid and vrf to the sonic expected tableid contains
the vrfid. This violates the assumptions in the code
that the netlink message passes up the tableid as the
tableid. Additionally this code change did not modify
the rib_find_rn_from_ctx to actually properly decode
what could be passed up. Let's just fix this and let
Sonic carry the patch as appropriate for themselves
since they are not the only users of dplane_fpm_nl.c
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
When looping through the dplane providers, the worklist was
being populated with items from the last provider and then
the event system was checked to see if we should stop processing.
If the event system says `yes` then the dplane code would stop
and send the worklist to the master zebra pthread for collection.
This obviously skipped the next dplane provider on the list
which is double plus not good.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
The SRv6 SID Manager does not allow allocating an SRv6 End/uN function
even though it is already supported by staticd.
Signed-off-by: Carmine Scarpitta <cscarpit@cisco.com>
|
|
rmap_src wasn't initialized, so for IPv4 the unused 12 bytes would
contain whatever junk is on the stack on function entry. Also move
the IPv4 parse before the IPv6 parse so if it's successful we can be
sure the other bytes haven't been touched.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
zebra: include resolving nexthops in nhg hash
|
|
Do not allow system routes to be selected for ip protocol
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
static: fix botched staticd YANG conversion for dst-src
|
|
When a daemon wants to know about its routes, make it possible to have
that work for dst-src routes.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
The Linux kernel doesn't support dst-src routes with NHGs as nexthop,
for some (rather dubious) caching reasons.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Ensure that the nhg hash comparison function includes all
nexthops, including recursive-resolving nexthops.
Signed-off-by: Mark Stapp <mjs@cisco.com>
|
|
Implement the necessary data structures and code changes to support sending
table-direct routes to protocols running in different VRFs.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
|
|
Return error if IPv6 address or prefix is passed as an argument
to "show ip route" command.
UT:
r1# show ip route 2::3/128
% Cannot specify IPv6 address/prefix for IPv4 table
r1#
r1# show ip route 2::3
% Cannot specify IPv6 address/prefix for IPv4 table
r1#
Signed-off-by: Pooja Jagadeesh Doijode <pdoijode@nvidia.com>
|
|
|
|
The dg_update_list access is controlled by the dg_mutex in all
other locations. Let's just add a mutex usage around the initialization
of the dg_update_list even if it's part of the startup, just to keep
things consistent.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
Current -n option is only for zebra and mgmtd. All other daemons receive
the VRF backend configuration from zebra upon connection to it. This
leads to a potential race condition - daemons need to know the backend
before they start reading their config, but they can be not connected to
zebra yet at this point. As the VRF backend cannot change during runtime,
let's introduce a new global -w option for setting netns backend, to
make sure that all daemons know their VRF backend immediately after
start.
The reason for introducing a new option instead of making -n global is
that ospfd already uses -n for another purposes.
Signed-off-by: Igor Ryzhov <idryzhov@gmail.com>
|
|
vrf->ns_ctxt is only ever used in zebra, so move its initialization to
zebra's callback. Ideally this pointer shouldn't even be a part of
library's vrf struct, and moved to zebra-specific struct, but this is
the first step.
Signed-off-by: Igor Ryzhov <idryzhov@gmail.com>
|
|
The backend type cannot be unknown. It is configured to VRF_LITE by
default in zebra anyway, so just init to VRF_LITE in the lib and remove
the UNKNOWN type.
Signed-off-by: Igor Ryzhov <idryzhov@gmail.com>
|
|
mgmtd backend yang model (depends on #17796)
|
|
Active routes are active
|
|
Currently FRR when installing a nexthop group, the installation can fail.
The assumption with the code was that the current nexthop group was
not already installed. This leaves a problem state where if the
users of the nexthop group are removed, the nexthop group will be
removed possibly leaving a orphaned nexthop group in the data plane.
FRR on a nexthop group installation does not actually know the status
of the nexthop group in the kernel. It's possible that a earlier
version of the nexthop group is left in play. It's possible that
there is no nexthop group in the kernel at all. Leaving the
Installed flag alone allows upon Zebra removing the nexthop
group when it is removed from zebra.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
Currently if you have an interface down event, Zebra
sets the nexthop(s) as !ACTIVE that use it. On
interface up events the singleton nexthops are not being
set as ACTIVE. Due to timing events it is sometimes
possible to end up with a route that is using a singleton
Change singleton nexthops to set the nexthop to ACTIVE.
This will allow the nexthop to be reinstalled appropriately
as well.
I was able to easily reproduce this using sharpd since
it does not attempt to reinstall the routes when a interface
goes up/down.
Before:
D>* 10.0.0.0/32 [150/0] via 192.168.102.34, dummy2, weight 1, 00:00:01
sharpd@eva ~/frr5 (master)> sudo ip link set dummy2 down ; sudo ip link set dummy2 up
D> 10.0.0.0/32 [150/0] (350) via 192.168.102.34, dummy2 inactive, weight 1, 00:00:10
After code change:
D>* 10.0.0.0/32 [150/0] (73) via 192.168.102.34, dummy2, weight 1, 00:00:14
sharpd@eva ~/frr5 (master)> sudo ip link set dummy2 down ; sudo ip link set dummy2 up
D>* 10.0.0.0/32 [150/0] (73) via 192.168.102.34, dummy2, weight 1, 00:00:21
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
Signed-off-by: Christian Hopps <chopps@labn.net>
|
