| Age | Commit message (Collapse) | Author |
|---|
|
When the IGMP group source limit is reached the function
`igmp_get_source_by_addr` won't return a `struct gm_source` so we must
test for that condition before attempting to access its fields.
Fixes coverity scan issue 1637406.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
|
|
pimd: Fix PIM VRF support (send register/register stop in VRF)
|
|
pim: Fix vrf binding of autorp and mroute socket
|
|
Group joining got broken when moving the autorp socket to open/close
as needed. This fixes it so autorp group joining is properly handled
as part of opening the socket.
Signed-off-by: Nathan Bahr <nbahr@atcorp.com>
|
|
Bind the autorp socket to the vrf device.
Also fixed mroute socket to use vrf_bind instead of directly
setting the socket option.
Signed-off-by: Nathan Bahr <nbahr@atcorp.com>
|
|
In 946195391406269003275850e1a4d550ea8db38b and
8ebcc02328c6b63ecf85e44fdfbf3365be27c127, transmission of PIM register and
register stop messages was changed to use a separate socket. However, that
socket is not bound to a possible VRF, so the messages were sent in the
default VRF instead. Call vrf_bind() once after socket creation and when the
VRF is ready to ensure transmission in the correct VRF. vrf_bind() handles
the non-VRF case (i.e. VRF_DEFAULT) automatically, so it may be called
unconditionally.
Signed-off-by: Martin Buck <mb-tmp-tvguho.pbz@gromit.dyndns.org>
|
|
pimd: During prefix-list update, behave as PIM_UPSTREAM_NOTJOINED sta…
|
|
pimd: Fix for data packet loss when FHR is LHR and RP
|
|
Just filter incoming packets against a specified prefix-list.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Incorporate frrbot suggestion to avoid the CI warning.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
|
|
(Somewhat) useful when dealing with an interface that has only one host
attached. Only works for IGMPv2 and MLDv1, other protocol versions have
no leave message.
Co-authored-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
|
|
Topology:
A single router is acting as the First Hop Router (FHR), Last Hop Router (LHR), and RP.
RC and Issue:
When an upstream S,G is in join state, it sends a register message to the RP.
If the RP has the receiver, it sends a register stop message and switches to the shortest path.
When the register stop message is processed, it removes pimreg, moves to prune,
and starts the reg stop timer.
When the reg stop timer expires, PIM changes S,G state to Join Pending and sends out a NULL
register message to RP. RP receives it and fails to send Reg stop because SPT is not set at that point.
The problem is when the register stop timer pops and state is in Join Pending.
According to https://www.rfc-editor.org/rfc/rfc4601#section-4.4.1,
we need to put back the pimreg reg tunnel into the S,G mroute.
This causes data to be sent to the control plane and subsequently interrupts the line rate.
Fix:
If the router is FHR and RP to the group,
ignore SPT status and send out a register stop message back to the DR (in this context, the same router).
Ticket: #3506780
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Signed-off-by: Rajesh Varatharaj <rvaratharaj@nvidia.com>
|
|
Allow user to reset MLD state on all interfaces in a VRF.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
|
|
Let user configure a source/group limit for MLD protocol.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
|
|
For groups we can just look at the length of the list, for sources we
need to count them on a per-interface level.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
pimd: fix DR election race on startup
|
|
pimd: Fix for FHR mroute taking longer to age out
|
|
In case interface address is learnt during configuration, make sure to
run DR election when configuring PIM/PIM passive on interface.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
|
|
(conformance issue)
Issue:
If there are any changes to the prefix list, we perform a re-lookup to map the correct RP for the group.
Even if the S,G entry is PIM_UPSTREAM_NOTJOINED and in FHR, In the case of IGMPv3, an S,G entry can be
created with no joins. this is not necessary.
https://www.rfc-editor.org/rfc/rfc4601#section-4.5.7 says no op in case of NOTJOINED
Solution:
To solve this issue, Stop RP mapping when the state is NOTJOINED
Ticket: #3496931
Signed-off-by: Rajesh Varatharaj <rvaratharaj@nvidia.com>
|
|
Issue:
When there is no traffic for a group, the LHR and RP take the default KAT+Join timer expiry of
a maximum of 480 seconds to clear the S,G . However, in the FHR, we update the state from JOINED
to NOT Joined, downstream state from PPto NOINFO. This restarts the ET timer, causing S,G on FHR to
take more than 10 minutes to age out.
In other words,
Consider a case where (S,G) is in Join state. When the traffic stops and the KAT (210) expires,
the Join expiry timer restarts. At this time, if we receive a prune, the expectation is to set
PPT to 0 (RFC 4601 sec 4.5.2).
When the PPT expires, we move to the noinfo state and restart the expiry timer one more time. We remove the
(S,G) entry only after ~10 minutes when there is no active traffic.
Summary:
KAT Join ET 210 + PP ET 210 + NOINFO ET 210.
Solution:
Delete the ifchannel when in noinfo state, and KAT is not running.
Ticket: #13703
Signed-off-by: Rajesh Varatharaj <rvaratharaj@nvidia.com>
|
|
Use a memory allocation specific type for filter names (to help detect memory
leaks) and fix a memory leak when releasing peer memory.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
|
|
Don't leave the socket open if we are not enabled for discovery
or announcements.
Signed-off-by: Nathan Bahr <nbahr@atcorp.com>
|
|
PIMD: RPF lookup mode per-group, per-source
|
|
pimd: always write cand-rp group config even when rp is inactive
|
|
Signed-off-by: Jafar Al-Gharaibeh <jafar@atcorp.com>
|
|
With the recent suppoort of multiple sources of RPs, we can assume non static RPs
are BSR RPs. Just make the check explicit for BSR.
Signed-off-by: Jafar Al-Gharaibeh <jafar@atcorp.com>
|
|
On the BSR node itself, RPs shouldn't timeout, becase we know
the node is the BSR, and it is active!
fixes:#17587
Signed-off-by: Jafar Al-Gharaibeh <jafar@atcorp.com>
|
|
Add the support to store lookup modes as a sorted list.
List is non-unique and sorts mode with both lists < modes with one list < global mode (no lists).
This way, when finding the right mode, we will match a lookup using a prefix list before the global mode.
Add passing group address into all lookups (using nht cache and/or synchronous lookup).
Many areas don't have a group address, use PIMADDR_ANY if no valid group is needed.
Signed-off-by: Nathan Bahr <nbahr@atcorp.com>
|
|
Add options for group-list and source-list, both of which take a prefix list name.
The prefix list is used to determine the lookup mode for specific sources and/or groups.
Any number of lookup modes can be configured as long as the combination of group
and source list is unique.
A global lookup mode (empty group and source lists) is always added and defaults to mrib-then-urib
as it currently functions. The global lookup mode can be changed as it current exists with the command
`rpf-lookup-mode MODE`.
When determinig which mode to use, match source (and group if provided) against the lists, if they are set.
If a lookup does not specify a group, then only use lookup modes that do not have a group list defined.
A lookup by definition will have a source, so no special handling there.
Signed-off-by: Nathan Bahr <nbahr@atcorp.com>
|
|
Signed-off-by: Jafar Al-Gharaibeh <jafar@atcorp.com>
|
|
Fix PIMD RPF lookup mode and nexthop tracking
|
|
Moved `show ip rpf A.B.C.D` command here from zebra, deprecated and aliased
to `show ip pim nexthop-lookup`.
Allow group to be optional in the lookup command. Only validate group if
source is ANY. Documented setting source via RP if not provided.
Added new output if ANY source + group lookup is performed and no
RP is found for the group. Updated output to include souce and
group for lookup.
Signed-off-by: Nathan Bahr <nbahr@atcorp.com>
|
|
Link up the RPF lookup mode changing to a force update to RP's and
upstreams registered for nexthop lookup cache updates.
Signed-off-by: Nathan Bahr <nbahr@atcorp.com>
|
|
Refactor the next hop tracking in PIM to fully support the configured RPF lookup mode.
Moved many NHT related functions to pim_nht.h/c
NHT now tracks both MRIB and URIB tables and makes nexthop decisions based on the configured lookup mode.
Signed-off-by: Nathan Bahr <nbahr@atcorp.com>
|
|
Add prefix length in nexthop response.
Apply lookup mode to the sychronous lookups, where we may lookup
the MRIB, URIB, or both and make a decision based on the nexthop.
Signed-off-by: Nathan Bahr <nbahr@atcorp.com>
|
|
Add rpf-lookup-mode MODE vty command under router pim block.
Including NB piping and config write. Using the mode still pending.
Signed-off-by: Nathan Bahr <nbahr@atcorp.com>
|
|
pimd,pim6d: optimize multicast prefix generation and fix coverity scan defect
|
|
pim6d: fix crash on clear ipv6 mroute
|
|
Fix Coverity Scan CID 1602463: make it impossible for the function to fail.
Hardcode the multicast prefix generation instead of calling `str2prefix()`
which caused unnecessary memory allocations and returned error values.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
|
|
Modified ZEBRA_NEXTHOP_LOOKUP_MRIB to include the SAFI from which to do the lookup.
This generalizes the API away from MRIB specifically and allows the user to decide how it should do lookups.
Rename ZEBRA_NEXTHOP_LOOKUP_MRIB to ZEBRA_NEXTHOP_LOOKUP now that it is more generalized.
This change is in preperation to remove multicast lookup mode completely from zebra.
Signed-off-by: Nathan Bahr <nbahr@atcorp.com>
|
|
Allow user to specify the RP field for the SA messages.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
|
|
pimd: clean up MSDP code
|
|
Upstream some internal code
|
|
Guard MSDP code to compile only on IPv4 and remove all MSDP code from
PIMv6.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
|
|
Reorganize the MSDP initialization code and configuration writing code
to its appropriated place.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
|
|
PIMv6 does not implement MSDP, users should use PIMv6 embedded RP
instead.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
|
|
Fix crash on `clear ipv6 mroute` when using embedded RP.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
|
|
pimd: MSDP per peer SA limit
|
|
Looks like the cap setting was added for testing mlag via zebra test cli
to config the mlag role. However it is interfering with the valid state
updates rxed from the MLAG daemon based on timing (in some cases the
MLAG state changes are rxed before the capabilities).
Reference logs -
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
root@TORC11:mgmt:/home/cumulus# grep -ri "my_role\|MlagRole" /var/log/frr/bgpd.log
2021/06/18 13:26:40.380130 PIM: pim_mlag_process_mlagd_state_change: msg dump: my_role: SECONDARY, peer_state: DOWN
2021/06/18 13:26:40.380766 PIM: pim_mlag_process_mlagd_state_change: msg dump: my_role: SECONDARY, peer_state: DOWN
2021/06/18 13:26:41.382258 PIM: pim_mlag_process_mlagd_state_change: msg dump: my_role: SECONDARY, peer_state: RUNNING
2021/06/18 13:26:41.382379 PIM: pim_mlag_process_mlagd_state_change: msg dump: my_role: PRIMARY, peer_state: RUNNING
2021/06/18 13:26:52.386071 ZEBRA: Sending capabilities to client pim: MPLS enabled numMultipath 128 GR disabled MaintMode off MlagRole 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Ticket: #2691629
Signed-off-by: Anuradha Karuppiah <anuradhak@nvidia.com>
|
|
Rather than storing the prefix-list name and looking it up every time we use it, store a pointer to the prefix-list itself.
Signed-off-by: Corey Siltala <csiltala@atcorp.com>
|
