| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Barry A. Trent <barry.trent@atcorp.com>
|
|
New CLI commands added:
router pim [vrf NAME]
autorp discovery
autorp announce RP-ADDR [GROUP | group-list PREFIX-LIST]
autorp announce {scope (1-255) | interval (1-65535) | holdtime (0-65535)}
autorp discovery
Enables Auto RP discovery for learning dynamic RP information using the
AutoRP protocol.
autorp announce RP-ADDR [GROUP | group-list PREFIX-LIST]
Enable announcements of a candidate RP with the given group range, or
prefix list of group ranges, to an AutoRP mapping agent.
autorp announce {scope (1-255) | interval (1-65535) | holdtime (0-65535)}
Configure the parameters of the AutoRP announcement messages.
The scope sets the packet TTL.
The interval sets the time between TX of announcements.
The holdtime sets the hold time in the message, the time the mapping
agent should wait before invalidating the candidate RP information.
debug pim autorp
Enable debug logging of the AutoRP protocol
show ip pim [vrf NAME] autorp [json]
Show details of the AutoRP protocol.
To view learned RP info, use the existing command 'show ip pim rp-info'
Extend pim yang for new configuration:
augment /frr-rt:routing/frr-rt:control-plane-protocols/frr-rt:control-plane-protocol/frr-pim:pim/frr-pim:address-family:
+--rw rp
+--rw auto-rp
+--rw discovery-enabled? boolean
+--rw announce-scope? uint8
+--rw announce-interval? uint16
+--rw announce-holdtime? uint16
+--rw candidate-rp-list* [rp-address]
+--rw rp-address inet:ip-address
+--rw (group-or-prefix-list)?
+--:(group)
| +--rw group? frr-route-types:ip-multicast-group-prefix
+--:(prefix-list)
+--rw prefix-list? plist-ref
Signed-off-by: Nathan Bahr <nbahr@atcorp.com>
|
|
Signed-off-by: Barry A. Trent <barry.trent@atcorp.com>
|
|
Signed-off-by: Barry A. Trent <barry.trent@atcorp.com>
|
|
Signed-off-by: Jafar Al-Gharaibeh <jafar@atcorp.com>
|
|
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Jafar Al-Gharaibeh <jafar@atcorp.com>
|
|
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Jafar Al-Gharaibeh <jafar@atcorp.com>
|
|
PIM: Implement static IGMP joins without an IGMP report
|
|
This will add a static IGMP group that does not rely on an underlying
socket join which sends traffic to the cpu unneccesarily. Instead, the
groups are joined directly without any IGMP interactions.
New command is under interfaces, 'ip igmp static-group ...'.
Added an alias for 'ip igmp join ...' to 'ip igmp join-group'.
Moved IGMP join groups to new yang list "join-group" and reused
the "static-group" list for the IGMP static groups.
Signed-off-by: Nathan Bahr <nbahr@atcorp.com>
|
|
Coverity scan ID: 1598684
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
|
|
Implement MSDP MD5 authentication connection support.
Implementation details:
- Move the MSDP socket creation code to a generic function so it can be
parametrized to be used with/without authentication.
- The MSDP peer connection will not change when the configuration is
set, instead it will only be applied next connection or when
`clear ip msdp peer A.B.C.D` is called.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
|
|
Implement MSDP peer incoming/outgoing SA filter.
Note
----
Cisco extended access list has a special meaning: the first address is
the source address to filter.
Example:
! The rules below filter some LAN prefix to be leaked out
access-list filter-lan-source deny ip 192.168.0.0 0.0.255.255 224.0.0.0 0.255.255.255
access-list filter-lan-source permit any
router pim
msdp peer 192.168.0.1 sa-filter filter-lan-source out
! The rules below filter some special management group from being
! learned
access-list filter-management-group deny 230.0.0.0 0.255.255.255
access-list filter-management-group permit any
router pim
msdp peer 192.168.0.1 sa-filter filter-management-group in
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
|
|
Signed-off-by: Jafar Al-Gharaibeh <jafar@atcorp.com>
|
|
Moved all existing global/vrf PIM config to the new subnode.
Existing configuration updated to be hidden and deprecated.
Both versions of configuration still work together.
Signed-off-by: Nathan Bahr <nbahr@atcorp.com>
|
|
0 is a valid DR priority.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
command 'show ip pim mlag summary json' should display 'mlagConnUp',
'mlagPeerConnUp', and 'mlagPeerZebraUp' when the connection is down.
Fix:
Added 'json_object_boolean_false_add()' for these objects.
Ticket: #
Signed-off-by: Rajesh Varatharaj <rvaratharaj@nvidia.com>
|
|
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
|
|
Modify empty json object to take input obj
instead of allocating always one.
There are situation where in error condition or no data
case print empty json (`{}`) with already allocated
Signed-off-by: Chirag Shah <chirag@nvidia.com>
|
|
1. Added interface name, group address and detail option to existing
"show ip igmp groups" so that user can retrieve all the groups
or a particular group for an interface. Detail option shows the source
information for the group. With that, the show command
looks like:
"show ip igmp [vrf NAME$vrf_name] groups [INTERFACE$ifname [GROUP$grp_str]] [detail$detail] [json$json]"
2. Changed pim_cmd_lookup_vrf() to return empty JSON if VRF is not present
3. Changed "detail" option to print non pretty JSON
4. Added interface name and group address to existing
"show ip igmp sources" so that user can retrieve all the sources for
all the groups or, all the sorces for a particular group for an
interface. With that, the show command looks like:
"show ip igmp [vrf NAME$vrf_name] sourcess [INTERFACE$ifname [GROUP$grp_str]] [json$json]"
Signed-off-by: Pooja Jagadeesh Doijode <pdoijode@nvidia.com>
|
|
Done with a combination of regex'ing and banging my head against a wall.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Passing a pre-formatted buffer in these places needs a `"%s"` in front
so it doesn't get formatted twice.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Rather than running selected source files through the preprocessor and a
bunch of perl regex'ing to get the list of all DEFUNs, use the data
collected in frr.xref.
This not only eliminates issues we've been having with preprocessor
failures due to nonexistent header files, but is also much faster.
Where extract.pl would take 5s, this now finishes in 0.2s. And since
this is a non-parallelizable build step towards the end of the build
(dependent on a lot of other things being done already), the speedup is
actually noticeable.
Also files containing CLI no longer need to be listed in `vtysh_scan`
since the .xref data covers everything. `#ifndef VTYSH_EXTRACT_PL`
checks are equally obsolete.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Added common pim_show_bsm_db_helper to suppport both PIM and
PIMV6.
pim_show_bsm_db is moved to pim_cmd_common.c file.
Signed-off-by: Sarita Patra <saritap@vmware.com>
|
|
Added pim_show_group_rp_mappings_info_helper to suppport both PIM and
PIMV6.
pim_show_group_rp_mappings_info() is moved to pim_cmd_common.c file.
Signed-off-by: Sarita Patra <saritap@vmware.com>
|
|
Added common API pim_show_bsr_helper to suppport both PIM and
PIMV6.
pim_show_bsr() is moved to pim_cmd_common.c file.
Signed-off-by: Sarita Patra <saritap@vmware.com>
|
|
Introduced common api pim_process_unicast_bsm_cmd,
pim_process_no_unicast_bsm_cmd which will process
both "[no] ip pim unicast-bsm" command and "[no] ipv6 pim
unicast-bsm" command.
Signed-off-by: Sarita Patra <saritap@vmware.com>
|
|
Introduced common api pim_process_bsm_cmd,
pim_process_no_bsm_cmd which will process
both "[no] ip pim bsm" command and "[no] ipv6 pim
bsm" command.
Signed-off-by: Sarita Patra <saritap@vmware.com>
|
|
*: clean up various CLI-related bits
|
|
*: Create and use infrastructure to show debugs in lib
|
|
RpAddress is showing wrong value in
"show ipv6 pim bsm-database" cli. This is fixed now.
Issue: #12089
Signed-off-by: Sarita Patra <saritap@vmware.com>
|
|
There are lib debugs being set but never show up in
`show debug` commands because there was no way to show
that they were being used. Add a bit of infrastructure
to allow this and then use it for `debug route-map`
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Changing
PIM_DO_DEBUG_IGMP_EVENTS to PIM_DO_DEBUG_GM_EVENTS
PIM_DO_DEBUG_IGMP_PACKETS to PIM_DO_DEBUG_GM_PACKETS
PIM_DO_DEBUG_IGMP_TRACE to PIM_DO_DEBUG_GM_TRACE
PIM_DO_DEBUG_IGMP_TRACE_DETAIL to PIM_DO_DEBUG_GM_TRACE_DETAIL
PIM_DONT_DEBUG_IGMP_EVENTS to PIM_DONT_DEBUG_GM_EVENTS
PIM_DONT_DEBUG_IGMP_PACKETS to PIM_DONT_DEBUG_GM_PACKETS
PIM_DONT_DEBUG_IGMP_TRACE to PIM_DONT_DEBUG_GM_TRACE
PIM_DONT_DEBUG_IGMP_TRACE_DETAIL to PIM_DONT_DEBUG_GM_TRACE_DETAIL
PIM_MASK_IGMP_EVENTS to PIM_MASK_GM_EVENTS
PIM_MASK_IGMP_PACKETS to PIM_MASK_GM_PACKETS
PIM_MASK_IGMP_TRACE to PIM_MASK_GM_TRACE
PIM_MASK_IGMP_TRACE_DETAIL to PIM_MASK_GM_TRACE_DETAIL
to be used for both IGMP and MLD debugs.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
|
|
Modifying igmp_group_count of struct pim_instance
to gm_group_count which is to be used for both IGMP and MLD.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
|
|
The call into pim_cmd_lookup_vrf may be NULL
and dereferencing it before ensuring that the
vrf pointer is non-NULL is a good way to crash.
A crash can be initiated in pim:
eva# show ip msdp vrf NOEXIST mesh-group
vtysh: error reading from pimd: Permission denied (13)Warning: closing connection to pimd because of an I/O error!
eva# 2022/08/15 11:47:38 [PHJDC-499N2][EC 100663314] STARVATION: task vtysh_rl_read (560b77f76de6) ran for 16777ms (cpu time 0ms)
eva#
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
Signed-off-by: Abhishek N R <abnr@vmware.com>
|
|
Signed-off-by: Abhishek N R <abnr@vmware.com>
|
|
|
|
In several places, we are getting the vrf structure using
vrf_lookup_by_name(). Again we are passing vrf->vrf_id to
pim_get_pim_instance() to get the pim_instance.
The API pim_get_pim_instance() again get the VRF structure using
vrf_lookup_by_id(). This is avoided in this PR.
Signed-off-by: Sarita Patra <saritap@vmware.com>
|
|
These are in packed structs at weird offsets (e.g. 2 bytes), and as such
need a memcpy to get them into proper alignment.
It'd be even better if the pimd code used proper de/serialization, but
let's get this improved one step at a time.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
|
|
Signed-off-by: sarita patra <saritap@vmware.com>
|
|
Signed-off-by: sarita patra <saritap@vmware.com>
|
|
Signed-off-by: sarita patra <saritap@vmware.com>
|
|
Signed-off-by: sarita patra <saritap@vmware.com>
|
|
Signed-off-by: sarita patra <saritap@vmware.com>
|
|
Signed-off-by: Sarita Patra <saritap@vmware.com>
|
|
pimd: json support for nexthop
|
|
Moving the reusable code of pim_show_nexthop apis to common file
pim_cmd_common.c file and adding the json support for show ipv6 pim nexthop
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
|
|
Problems Identified:
show ip pim nexthop cli didn't have json extension and
show ip pim vrf all upstream have improper json format
Description:
show ip pim nexthop command shows the nexthops that are being used.
Added json support for the command.
show ip pim vrf all upstream displays upstream information for all vrfs about a S,G mroute.
Formatted the json structure for this command.
Signed-off-by: nsaigomathi <nsaigomathi@vmware.com>
|
