| Age | Commit message (Collapse) | Author |
|---|
|
frr(config-if)# ip igmp join 232.1.1.1 10.10.10.10
frr(config-if)# do sh ip igmp sources
Interface Address Group Source Timer Fwd Uptime
ens192 232.1.1.1 10.10.10.10 04:10 N 00:00:10
frr(config-if)#
The above output is misaligned and is having Address field which is not
required here.
Fixing it.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
|
|
Signed-off-by: sarita patra <saritap@vmware.com>
|
|
Adding the Interface level config command
ipv6 mld last-member-query-interval (1-65535)
This command can be use to tune the response time for group specific queries.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
|
|
Adding the Interface level config command
ipv6 mld last-member-query-count (1-255)
This command can be use to tune the number of Multicast-Address- Specific Queries
sent before the router assumes there are no remaining listeners for an address on a link.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
|
|
Adding the Interface level config command
ipv6 mld query-max-response-time <1-65535>
This command can be use to tune the max response time for general queries.
The number of seconds represented by the [Query Response Interval] must be less than the [Query Interval]
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
|
|
Adding new show commands to display pim nexthops and
pim nexthop lookups received from zebra.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
|
|
Adding new show CLI to display regarding pim neighbors.
Changing DEFUN to DEFPY for "show ip pim neighbor" command.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
|
|
Adding the new cli to display pim local membership information.
Changing DEFUN to DEPFY for "show ip pim local-membership"
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
|
|
Adding show ipv6 pim join and show ipv6 pim vrf all join
CLIs to display pim join related information and
formatted the json output for "show ip pim join" and
"show ip pim vrf all join" commands.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
|
|
Adding show ipv6 pim interface and show ipv6 pim vrf all interface
CLIs to display pim enabled interface informations and
formatted the json output for "show ip pim interface" and
"show ip pim vrf all interface" commands.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
|
|
Adding new CLI to display pim channel informations.
Changing DEFUN to DEPFY for ""show ip pim channel"
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
|
|
Moving the functions that are used by both IPV4 and IPV6 to a
common file pim_cmd_common.c file
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
|
|
Adding new show CLI to display pim internal state related to groups.
Signed-off-by: Abhishek N R <abnr@vmware.com>
|
|
Adding new show CLI to display pim RPF for upstreams.
Signed-off-by: Abhishek N R <abnr@vmware.com>
|
|
Adding new show CLI to display group join desired status.
Signed-off-by: Abhishek N R <abnr@vmware.com>
|
|
Adding new show CLI to display pim upstream information.
Signed-off-by: Abhishek N R <abnr@vmware.com>
|
|
Adding new show CLI to display pim statistics.
Signed-off-by: Abhishek N R <abnr@vmware.com>
|
|
Adding new show CLI to display pim secondary addresses.
Signed-off-by: Abhishek N R <abnr@vmware.com>
|
|
Adding new show CLI to display pim RPF information.
Also corrected ipv4 json object.
Signed-off-by: Abhishek N R <abnr@vmware.com>
|
|
Moving the functions that are used by both IPV4 and IPV6 to a
common file pim_cmd_common.c file
Signed-off-by: Abhishek N R <abnr@vmware.com>
|
|
Adding new show CLI to display pim RP information.
Also corrected ipv4 json object.
Signed-off-by: Abhishek N R <abnr@vmware.com>
|
|
pimd: add 'debug pim vxlan' when 'debug pim' is used
|
|
pimd: add source and group information in mroute json
|
|
show ip mroute json command displays the source, group info
per oil, so for pruned group since the OIL is empty, it is not
showing.
Fix: Added the above information per source.
Signed-off-by: sarita patra <saritap@vmware.com>
|
|
pimd: Added new option "detail" in the "debug pim nht" CLI
|
|
Reversely, negating 'debug pim' will disable vxlan debugging.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
|
|
```
exit1-debian-11# sh ip pim interface traffic eth2 json
{
"eth2":{
"name":"eth2",
"state":"up",
"address":"192.168.10.123",
"index":4,
"flagMulticast":true,
"flagBroadcast":true,
"lanDelayEnabled":true,
"helloRx":2,
"helloTx":2,
"joinRx":0,
"joinTx":1,
"pruneRx":0,
"pruneTx":0,
"registerRx":0,
"registerTx":0,
"registerStopRx":0,
"registerStopTx":0,
"assertRx":0,
"assertTx":0,
"bsmRx":0,
"bsmTx":0
}
}
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
|
|
opensourcerouting/feature/igmp_stats_total_received_message
pimd: Add additional IGMP stats (peak number of groups)
|
|
Now we return all zeroed stats, which seems wrong. Handle the same way, as
with PIM interfaces. Return empty JSON and a warning for VTYSH.
```
exit1-debian-11# sh ip igmp statistics interface belekas
% No such interface
exit1-debian-11# sh ip igmp statistics interface belekas json
{
}
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
|
|
```
exit1-debian-11# sh ip igmp statistics interface eth2
IGMP statistics
Interface : eth2
V1 query : 0
V2 query : 0
V3 query : 25
V2 leave : 0
V1 report : 0
V2 report : 0
V3 report : 34
mtrace response : 0
mtrace request : 0
unsupported : 0
joins failed : 0
joins sent : 13
general queries sent : 2
group queries sent : 24
peak groups : 9
total groups : 4
total source groups : 1
exit1-debian-11# sh ip igmp statistics interface eth2 json
{
"eth2":{
"name":"eth2",
"queryV1":0,
"queryV2":0,
"queryV3":25,
"leaveV2":0,
"reportV1":0,
"reportV2":0,
"reportV3":34,
"mtraceResponse":0,
"mtraceRequest":0,
"unsupported":0,
"peakGroups":9,
"totalGroups":4,
"totalSourceGroups":1,
"joinsFailed":0,
"joinsSent":13,
"generalQueriesSent":2,
"groupQueriesSent":24
}
}
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
|
|
```
exit1-debian-11# do sh ip igmp statistics
IGMP statistics
Interface : global
V1 query : 0
V2 query : 0
V3 query : 3
V2 leave : 0
V1 report : 0
V2 report : 0
V3 report : 18
mtrace response : 0
mtrace request : 0
unsupported : 0
total received messages : 21
joins failed : 0
joins sent : 16
general queries sent : 6
group queries sent : 3
total groups : 4
total source groups : 1
exit1-debian-11# do sh ip igmp statistics json
{
"global":{
"name":"global",
"queryV1":0,
"queryV2":0,
"queryV3":4,
"leaveV2":0,
"reportV1":0,
"reportV2":0,
"reportV3":18,
"mtraceResponse":0,
"mtraceRequest":0,
"unsupported":0,
"totalReceivedMessage":22,
"totalGroups":3,
"totalSourceGroups":1,
"joinsFailed":0,
"joinsSent":16,
"generalQueriesSent":6,
"groupQueriesSent":4
}
}
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
|
|
```
exit1-debian-11# sh ip igmp statistics
IGMP statistics
Interface : global
V1 query : 0
V2 query : 0
V3 query : 6
V2 leave : 0
V1 report : 0
V2 report : 0
V3 report : 14
mtrace response : 0
mtrace request : 0
unsupported : 0
joins failed : 0
joins sent : 16
general queries sent : 6
group queries sent : 4
total groups : 5
total source groups : 1
exit1-debian-11# sh ip igmp statistics json
{
"global":{
"name":"global",
"queryV1":0,
"queryV2":0,
"queryV3":6,
"leaveV2":0,
"reportV1":0,
"reportV2":0,
"reportV3":18,
"mtraceResponse":0,
"mtraceRequest":0,
"unsupported":0,
"totalGroups":5,
"totalSourceGroups":1,
"joinsFailed":0,
"joinsSent":16,
"generalQueriesSent":6,
"groupQueriesSent":4
}
}
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
|
|
*: Fix JSON keys with whitespaces and PascalCase
|
|
```
exit1-debian-11# sh ip igmp statistics
IGMP statistics
Interface : global
V1 query : 0
V2 query : 0
V3 query : 0
V2 leave : 0
V1 report : 0
V2 report : 0
V3 report : 16
mtrace response : 0
mtrace request : 0
unsupported : 0
joins failed : 0
joins sent : 11
total groups : 4
total source groups : 0
exit1-debian-11# sh ip igmp statistics json
{
"global":{
"name":"global",
"queryV1":0,
"queryV2":0,
"queryV3":0,
"leaveV3":0,
"reportV1":0,
"reportV2":0,
"reportV3":16,
"mtraceResponse":0,
"mtraceRequest":0,
"unsupported":0,
"totalGroups":4,
"totalSourceGroups":0,
"joinsFailed":0,
"joinsSent":11
}
}
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
|
|
pim6d: PIMv6 socket related changes
|
|
pimd: fix typo in IGMP interface statistics JSON output.
|
|
This isn't a system or interface setting, it's a socket behavior. It is
both irrelevant and confusing to the user since it doesn't affect any
system behavior (but it sounds like it does). Whether it is enabled or
not is solely relevant to how the code is designed to work.
So, remove it from output.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
And filter by group for PIM.
```
exit1-debian-11# show ip pim rp-info
RP address group/prefix-list OIF I am RP Source Group-Type
192.168.10.17 238.0.0.0/24 eth2 no Static ASM
192.168.10.110 232.0.0.0/24 eth2 no Static SSM
exit1-debian-11# show ip pim rp-info 238.0.0.0/24
RP address group/prefix-list OIF I am RP Source Group-Type
192.168.10.17 238.0.0.0/24 eth2 no Static ASM
exit1-debian-11# show ip pim rp-info 238.0.0.0/24 json
{
"192.168.10.17":[
{
"rpAddress":"192.168.10.17",
"outboundInterface":"eth2",
"iAmRP":false,
"group":"238.0.0.0/24",
"source":"Static",
"groupType":"ASM"
}
]
}
exit1-debian-11#
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
|
|
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
|
|
1. Moving the processing of the above command to an api.
2. Change DEFUN to DEPFY
3. Make the api common for pimv4 and pimv6 processing.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
|
|
1. Moving the processing of the command to a common api.
2. Changing the DEFUN to DEFPY.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
|
|
Changes correct typo in JSON output for IGMP interface statistics show
command from "leaveV3" to "leaveV2".
Signed-off-by: David Schweizer <dschweizer@opensourcerouting.org>
|
|
Problem Statement:
=================
PIM Logs are coming at interval of 1 minute although pim
is not enabled.
Root Cause Analysis:
====================
By default, RCPM configures the PIM debugs when router comes up
via script. The product cannot disable PIM even though it is not required.
Hence moving these logs under a new debug option which will not be
enabled by default.
Fix:
====
Added a new option "detail" in the cli:
debug pim nht detail
Co-author: Mobashshera Rasool <mrasool@vmware.com>
Signed-off-by: Sai Gomathi <nsaigomathi@vmware.com>
|
|
This cli is used to add multicast route on interface
Signed-off-by: sarita patra <saritap@vmware.com>
|
|
This cli is used to define multicast boundary on interface.
Signed-off-by: sarita patra <saritap@vmware.com>
|
|
This cli used to enable PIMV6 on interface.
Signed-off-by: sarita patra <saritap@vmware.com>
|
|
This cli used to enable PIMV6 on interface.
Signed-off-by: sarita patra <saritap@vmware.com>
|
|
This cli used to mark the interface as active-active.
Signed-off-by: sarita patra <saritap@vmware.com>
|
|
This cli used to configure PIMV6 hello and hold timer on interface.
Signed-off-by: sarita patra <saritap@vmware.com>
|
|
This cli used to configure PIMV6 dr-priority on interface.
Signed-off-by: sarita patra <saritap@vmware.com>
|
