| Age | Commit message (Collapse) | Author |
|---|
|
The external_id_table was only ever used to store pointers to data
and was never used for lookup during the course of normal operations.
However it did lead to crashes because somewhere along the way
external routes stored in the external_table never had their
id associated into the external_id_table and we would assert
on the node lookup failing.
Since this code was never used for anything other than
storing data and it was never retrieved for anything useful
let's just remove it from ospf6d.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
RFC 5187 specifies the Graceful Restart enhancement to the OSPFv3
routing protocol. This commit implements support for the GR
restarting mode.
Here's a quick summary of how the GR restarting mode works:
* GR can be enabled on a per-instance basis using the `graceful-restart
[grace-period (1-1800)]` command;
* To perform a graceful shutdown, the `graceful-restart prepare ipv6
ospf` EXEC-level command needs to be issued before restarting the
ospf6d daemon (there's no specific requirement on how the daemon
should be restarted);
* `graceful-restart prepare ospf` will initiate the graceful restart
for all GR-enabled instances by taking the following actions:
o Flooding Grace-LSAs over all interfaces
o Freezing the OSPF routes in the RIB
o Saving the end of the grace period in non-volatile memory (a JSON
file stored in `$frr_statedir`)
* Once ospf6d is started again, it will follow the procedures
described in RFC 3623 until it detects it's time to exit the graceful
restart (either successfully or unsuccessfully).
Testing done:
* New topotest featuring a multi-area OSPF topology (including stub
and NSSA areas);
* Successful interop tests against IOS-XR routers acting as helpers.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
|
|
Feature Implementation.
========================
This feature will help in advertising the External LSAs with aggregation.
The commands allow us to tune the advertisement with different parameters
as mentioned in the CLI List below.
It can also help in case we do not want to advertise any prefix with the
no-advertise option.
New CLIs added:
===============
summary-address X:X::X:X/M$prefix [tag (1-4294967295)] [{metric (0-16777215) | metric-type (1-2)}]
no summary-address X:X::X:X/M$prefix [tag (1-4294967295)] [{metric (0-16777215) | metric-type (1-2)}]
summary-address X:X::X:X/M$prefix no-advertise
no summary-address X:X::X:X/M$prefix no-advertise
aggregation timer (5-1800)
no aggregation timer (5-1800)
show ipv6 ospf6 summary-address [detail$detail] [json]
debug ospf6 lsa aggregation
CAT RUN:
========
QE to add test scripts
Signed-Off-by: Mobashshera Rasool <mrassol@vmware.com>
|
|
The following is implemented.
1. Configuring area as NSSA.
2. Generating Type 7 LSA.
3. Conversion of Type 7 to Type 5 ( Default Behavior).
4. NSSA ABR selection.
Reviewed-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Co-authored-by: Kaushik <kaushiknath.null@gmail.com>
Co-authored-by: Soman K.S <somanks@gmail.com>
Signed-off-by: Kaushik <kaushiknath.null@gmail.com>
|
|
Initially INP LSA is originated, when connected
interface comes up. As neighbor is not up, LSA is
not transmitted but stored in DB.
As NSM transition to FULL, INP is scheduled but
ospf6_flood() would not originate the LSA as
current DB and new INP LSA same so it discards
the new LSA.
When Neighor becomes FULL, originate INP via
flushing current DB copy and generate new.
This is introduced as PR 1738 introduce,
premature aging of LSAs in nbr table as R1
going down. upon neigbor coming up, INP was
not updated to new age.
Ticket:CM-19926,CM-19945
Testing Done:
Topology R3 --- R1 -- R2, R1 have INP LSA.
After frr restart R2 and R3 re learnt R1's
INP LSA as new neighbor(s) come up.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
|
|
RFC 2328 (14.1) Premature aging of LSAs from
routing domain :
When ospf6d is going away (router going down),
send MAXAGEd self originated LSAs to all
neighbors in routing domain to trigger
Premature aging to remove from resepective LSDBs.
Neighbor Router Reboot:
Upon receiving Self-originate MAXAGEd LSA, simply
discard, Current copy could be non maxaged latest.
For neighbor advertised LSA's (current copy in LSDB)
is set to MAXAGE but received new LSA with Non-MAXAGE
(with current age), discard the current MAXAGE LSA,
Send latest copy of LSA to neighbors and update the
LSDB with new LSA.
When a neighbor transition to FULL, trigger AS-External
LSAs update from external LSDB to new neighbor.
Testing:
R1 ---- DUT --- R5
| \
R2 R3
|
R4
Area 1: R5 and DUT
Area 0: DUT, R1, R2, R3
Area 2: R2 R4
Add IPv6 static routes at R5
Redistribute kernel routes at R5,
Validate routes at R4, redistributed via backbone
to area 2.
Stop n start frr.service at R5 and validated
MAXAGE LSAs then recent age LSAs in Database at DUT-R4.
Validated external routes installed DUT to R4.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
|
|
indent.py `git ls-files | pcregrep '\.[ch]$' | pcregrep -v '^(ldpd|babeld|nhrpd)/'`
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Support stubby and totally stubby areas in OSPFv3
Signed-off-by: Dinesh G Dutt <ddutt at cumulusnetworks.com>
Reviewed-by: Pradosh Mohapatra <pmohapat at cumulusnetworks.com>
|
|
2008-08-15 Paul Jakma <paul.jakma@sun.com>
* {ospf6d,ripngd}/*: Finish job of marking functions as static, or
exporting declarations for them, to quell warning noise with
Quagga's GCC default high-level of warning flags. Thus allowing
remaining, more useful warnings to be more easily seen.
|
|
|
|
|
|
fixes.
|
|
|
