| Age | Commit message (Collapse) | Author |
|---|
|
This moves all install_element calls into the file where the DEFUNs are
located. This fixes several small related bugs:
- ospf6d wasn't installing a "no interface FOO" command
- zebra had a useless copy of "interface FOO"
- pimd's copy of "interface FOO" was not setting qobj_index, which means
"description LINE" commands would fail with an error
The next commit will do the actual act of making "foo_cmd" static.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
This is a rather large mechanical commit that splits up the memory types
defined in lib/memtypes.c and distributes them into *_memory.[ch] files
in the individual daemons.
The zebra change is slightly annoying because there is no nice place to
put the #include "zebra_memory.h" statement.
bgpd, ospf6d, isisd and some tests were reusing MTYPEs defined in the
library for its own use. This is bad practice and would break when the
memtype are made static.
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
[CF: rebased for cmaster-next]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
|
|
The regular expression for finding DEFUN/ALIAS in
extract.pl looks for "DEFUN (" or "ALIAS (" if
the *.c file does not have this then it will just
silently ignore the cli.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
|
|
zebra.h pulls in config.h, which results in fiddling with things like
__FILE_OFFSET_BITS. It must always be included first, in order to set
flags that influence the compiler via <features.h>.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
(cherry picked from commit 821df2cf18e5978cc7ab532a8695444380d08270)
|
|
(cherry picked from commit 13c2a3db503fde67f647fa58fd4e1077517ebb5c)
|
|
Fix lots of warnings. Some const and type-pun breaks strict-aliasing
warnings left but much reduced.
* bgp_advertise.h: (struct bgp_advertise_fifo) is functionally identical to
(struct fifo), so just use that. Makes it clearer the beginning of
(struct bgp_advertise) is compatible with with (struct fifo), which seems
to be enough for gcc.
Add a BGP_ADV_FIFO_HEAD macro to contain the right cast to try shut up
type-punning breaks strict aliasing warnings.
* bgp_packet.c: Use BGP_ADV_FIFO_HEAD.
(bgp_route_refresh_receive) fix an interesting logic error in
(!ok || (ret != BLAH)) where ret is only well-defined if ok.
* bgp_vty.c: Peer commands should use bgp_vty_return to set their return.
* jhash.{c,h}: Can take const on * args without adding issues & fix warnings.
* libospf.h: LSA sequence numbers use the unsigned range of values, and
constants need to be set to unsigned, or it causes warnings in ospf6d.
* md5.h: signedness of caddr_t is implementation specific, change to an
explicit (uint_8 *), fix sign/unsigned comparison warnings.
* vty.c: (vty_log_fixed) const on level is well-intentioned, but not going
to fly given iov_base.
* workqueue.c: ALL_LIST_ELEMENTS_RO tests for null pointer, which is always
true for address of static variable. Correct but pointless warning in
this case, but use a 2nd pointer to shut it up.
* ospf6_route.h: Add a comment about the use of (struct prefix) to stuff 2
different 32 bit IDs into in (struct ospf6_route), and the resulting
type-pun strict-alias breakage warnings this causes. Need to use 2
different fields to fix that warning?
general:
* remove unused variables, other than a few cases where they serve a
sufficiently useful documentary purpose (e.g. for code that needs
fixing), or they're required dummies. In those cases, try mark them as
unused.
* Remove dead code that can't be reached.
* Quite a few 'no ...' forms of vty commands take arguments, but do not
check the argument matches the command being negated. E.g., should
'distance X <prefix>' succeed if previously 'distance Y <prefix>' was set?
Or should it be required that the distance match the previously configured
distance for the prefix?
Ultimately, probably better to be strict about this. However, changing
from slack to strict might expose problems in command aliases and tools.
* Fix uninitialised use of variables.
* Fix sign/unsigned comparison warnings by making signedness of types consistent.
* Mark functions as static where their use is restricted to the same compilation
unit.
* Add required headers
* Move constants defined in headers into code.
* remove dead, unused functions that have no debug purpose.
(cherry picked from commit 7aa9dcef80b2ce50ecaa77653d87c8b84e009c49)
Conflicts:
bgpd/bgp_advertise.h
bgpd/bgp_mplsvpn.c
bgpd/bgp_nexthop.c
bgpd/bgp_packet.c
bgpd/bgp_route.c
bgpd/bgp_routemap.c
bgpd/bgp_vty.c
lib/command.c
lib/if.c
lib/jhash.c
lib/workqueue.c
ospf6d/ospf6_lsa.c
ospf6d/ospf6_neighbor.h
ospf6d/ospf6_spf.c
ospf6d/ospf6_top.c
ospfd/ospf_api.c
zebra/router-id.c
zebra/rt_netlink.c
zebra/rt_netlink.h
|
|
Remove compile warnings for the lib directory
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by:
|
|
- Allow work queues to specify the yield duration for corresponding background thread
- Support using specified yield duration in thread yielding
- During work queue processing, if using a single list element with a meta-queue
(like done in Zebra), do not exit after each element is processed, instead
update the next-node upon a WQ_REQUEUE so that the WQ processing continues
and is terminated by the yield logic.
- Enhance work queue debug output
|
|
* (general) Move functions in headers into files, to be compiled into
shared object files. Remove inline qualifier from functions. Let the
compiler do the work.
|
|
* workqueue.c: (work_queue_run) Err more on the side of keeping granularity
down, by being more conservative about increasing it.
Also, fix mispelling.
|
|
* lib/workqueue.c: free-ing workqueues had never been tested obviously,
queue's thread was not being stopped
* bgpd/bgpd.c: null out freed workqueues, to prevent acting on freed
workqueues
|
|
|
|
existing static routes to be revalidated)
|
|
2006-03-30 Paul Jakma <paul.jakma@sun.com>
* workqueue.c: (work_queue_run) fix line length of comment
|
|
2006-02-02 Paul Jakma <paul.jakma@sun.com>
* workqueue.h: (struct work_queue) Remove the delay field.
It served no purpose and just introduced bad behaviour.
Should be excised before its allowed to escape into 1.0.
This removes need for the 'flood' and runs_since_clear
fields.
* workqueue.c: (general) excise delay factor between queue
runs, hence the 'flood' crap too.. See above.
* bgp_route.c: (bgp_{clear_node,process}_queue_init) delay
field is removed from workqueue spec.
|
|
2005-11-14 Paul Jakma <paul.jakma@sun.com>
* (general) pass struct work-queue to callback functions.
* workqueue.h: (struct work_queue) move the state flag
variables to end.
Add an opaque pointer to spec, for user-data global to the
queue.
Pass reference to work_queue to all callbacks.
* workqueue.c: (work_queue_item_remove) pass ref to workqueue
to user callbacks.
(work_queue_run) ditto.
|
|
* (general) Add state to detect queue floods. There's no sense
trying to be sparing of CPU resources, if the queue is
flooding and using ever more memory resources. we should just
get on with clearing the queue.
The sense of delay and hold were wrong way around, fix.
* workqueue.h: (struct work_queue) Add status bitfield. Add
'flood' integer to workqueue spec. Add runs_since_clear
counter to workqueue.
* workqueue.c: (work_queue_new) set defaults for delay, hold
and flood.
(work_queue_add) initial schedule should use delay, not hold.
(show_work_queues) Print flood field, conserve whitespace.
(work_queue_unplug) use delay, not hold.
(work_queue_run) consecutive runs should be seperated by hold
time, not delay.
Keep track of number of consecutive runs, go into 'overdrive'
if queue is being flooded, we can't avoid making heavy use of
resources, better to use CPU than ever more RAM.
|
|
* workqueue.h: Add a WQ_QUEUE_BLOCKED item_status return code,
to allow a queue function to indicate the queue is not
ready/blocked - rather than any problem with the item at hand.
Add a notion of being able to 'plug' and 'unplug' a queue.
Add helpers to plug/unplug a queue.
Add a completion callback, to be called when a queue is emptied.
* workqueue.c: (work_queue_new) remove useless list_free.
(work_queue_schedule) new internal helper function to schedule
queue, if appropriate.
(work_queue_add) use work_queue_schedule
(show_work_queues) Print 'P' if queue is plugged.
(work_queue_plug) new API function, plug a queue - ie prevent it
from 'drained' / processed / scheduled.
(work_queue_unplug) unplug a queue, allowing it to be drained
/ scheduled / processed again.
(work_queue_run) Add support for WQ_QUEUE_BLOCKED.
Add comment for RETRY_NOW case.
Make hysteris more aggresive in ramping up granularity, improves
performance significantly.
Add support for calling completion callback when queue is emptied,
possibly useful for knowing when to unplug a queue.
|
|
* workqueue.c (show_work_queues): Remove unused gettimeofday call.
|
|
* workqueue.h: (struct work_queue_item) change retry_count to ran,
its a count of number item has been run.
* workqueue.c: (show_work_queues) Fix formating of slightly
bugfix: fix SIGFPE if wq->runs is 0.
(work_queue_run) retry logic was slightly wrong.
cycles.best is 0 initialy, granularity is 1, so update best
if cycles >= granularity, not just >.
|
|
* workqueue.{c,h}: Helper API for setting up and running queues via
background threads.
* command.c: install the 'show workqueues' command
* memtypes.c: Add work queue mtypes, and a rib-queue type for
a zebra rib work queue.
* memtypes.h: Updated to match memtypes.c
* Makefile.am: Add new workqueue files to build.
|
