| Age | Commit message (Collapse) | Author |
|---|
|
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
|
|
Upon a 'ip netns del' event, the associated vrf with netns backend is
looked for, then the internal contexts are first disabled, then
suppressed.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
|
|
Vty commands that link netns context to a vrf is requiring some
privileges. The change consists in retrieving the privileges at the
vrf_cmd_init() called by the relevant daemon. Then use it.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
|
|
Signed-off-by: Lou Berger <lberger@labn.net>
|
|
Because socket creation is tightly linked with socket binding for vrf
lite, the proposal is made to extend socket creation APIs and to create
a new API called vrf_bind that applies to vrf lite. The passed interface
name is the interface that will be bound to the socket passed.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
|
|
That API can be used to wrap the ioctl call with various vrf instances.
This permits transparently doing the ioctl() call without taking into
consideration the vrf backend kind.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
|
|
This split is introducing logicalrouter.[ch] as the file that contains
the vty commands to configure logical router feature. The split has as
consequence that the backend of logical router is linux_netns.c formerly
called ns.c. The same relationship exists between VRF and its backend
which may be linux_netns.c file.
The split is adapting ns and vrf fiels so as to :
- clarify header
- ensure that the daemon persepctive, the feature VRF or logical router
is called instead of calling directly ns.
- this implies that VRF will call NS apis, as logical router does.
Also, like it is done for default NS and default VRF, the associated VRF
is enabled first, before NETNS is enabled, so that zvrf->zns pointer is
valid when NETNS discovery applies.
Also, other_netns.c file is a stub handler that will be used for non
linux systems. As NETNS feature is only used by Linux, some BSD systems
may want to use the same backend API to benefit from NETNS. This is what
that file has been done.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
|
|
The vrf_sockunion_socket() wraps sockunion_socket() with vrf_id as
additional parameter. The creation of socket forces the user to
transparently move to new NETNS for doing the operation.
The vrf_getaddr_info() wraps getaddr_info() with vrf_id as additional
parameter. That API relies on the underlying system. Then there may be
need to switch to an other netns in that case too.
Also, the vrf_socket() implementation is simplified.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
|
|
when the netns backend is selected for VRF, the default VRF is being
assigned a NSID. This avoids the need to handle the case where if the
incoming NSID was 0 for a non default VRF, then a specific handling had
to be done to keep 0 value for default VRF.
In most cases, as the first NETNS to get a NSID will be the default VRF,
most probably the default VRF will be assigned to 0, while the other
ones will have their value incremented. On some cases, where the NSID is
already assigned for NETNS, including default VRF, then the default VRF
value will be the one derived from the NSID of default VRF, thus keeping
consistency between VRF IDs and NETNS IDs.
Default NS is attempted to be created. Actually, some VMs may have the
netns feature, but the NS initialisation fails because that folder is
not present.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
|
|
Two apis are provided so that the switch from one netns to an other one
is taken care.
Also an other API to know if the VRF has a NETNS backend or a VRF Lite
backend.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
|
|
The addition of the name of the netns in the vrf message introduces also
a limitation when the size of the netns is bigger than 15 bytes. Then
the netns are ignored by the library.
In addition to this, some sanity checks have been introduced. some
functions to create the netns from a call not coming from the vty is
being added with traces.
Also, the ns vty function is reentrant, if the context is already
created.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
|
|
In addition to have the possibility to create from vty vrf based on a
netns backend, the API will be made accessible from external, especially
for zebra that will handle the netns discovery part. This commit is
externalising following functions:
- netns_pathname
- ns_handler_create
- vrf_handler_create
Also, the VRF initialisation case when under NETNS backend is changed,
since the NS identifier may not be known at the configuration time,but
may be known later, under discovery process.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
|
|
a vty command is added:
in addition to this command ( kept for future usage):
- [no] logical-router-id <ID> netns <NETNSNAME>
a new command is being placed under vrf subnode
- vrf <NAME>
[no] netns <NETNSNAME>
exit
This command permits to map a VRF with a Netnamespace.
The commit only handles the relationship between vrf and ns structures.
It adds 2 attributes to vrf structure:
- one defines the kind of vrf ( mapped under netns or vrf from kernel)
- the other is the opaque pointer to ns
The show running-config is handled by zebra daemon.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
|
|
The netns backend is chosen by VRF if a runtime flag named vrfwnetns is
selected when running zebra.
In the case the NETNS backend is chosen, in some case the VRFID value is
being assigned the value of the NSID. Within the perimeter of that work,
this is why the vrf_lookup_by_table function is extended with a new
parameter.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
|
|
Refine the notion of what FRR considers as "configured" VRF. It is no longer
based on user just typing "vrf FOO" but when something is actually configured
against that VRF. Right now, in zebra, the only configuration against a VRF
are static IP routes and EVPN L3 VNI. Whenever a configuration is removed,
check and clear the "configured" flag if there is no other configuration for
this VRF. When user attempts to configure a static route and the VRF doesn't
exist, a VRF is created; the VRF is only active when also defined in the
kernel.
Updates: 8b73ea7bd479030418ca06eef59d0648d913b620
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Ticket: CM-10139, CM-18553
Reviewed By: CCR-7019
Testing Done:
1. Manual testing for L3 VNI and static routes - FRR restart, networking
restart etc.
2. 'vrf' smoke
<DETAILED DESCRIPTION (REPLACE)>
|
|
A VRF is active only when the corresponding VRF device is present in the
kernel. However, when the kernel VRF device is removed, the VRF container in
FRR should go away only if there is no user configuration for it. Otherwise,
when the VRF device is created again so that the VRF becomes active, FRR
cannot take the correct actions. Example configuration for the VRF includes
static routes and EVPN L3 VNI.
Note that a VRF is currently considered to be "configured" as soon as the
operator has issued the "vrf <name>" command in FRR. Such a configured VRF
is not deleted upon VRF device removal, it is only made inactive. A VRF that
is "configured" can be deleted only upon operator action and only if the VRF
has been deactivated i.e., the VRF device removed from the kernel. This is
an existing restriction.
To implement this change, the VRF disable and delete actions have been modified.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Mitesh Kanjariya <mkanjariya@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Ticket: CM-18553, CM-18918, CM-10139
Reviewed By: CCR-7022
Testing Done:
1. vrf and pim-vrf automation tests
2. Multiple VRF delete and readd (ifdown, ifup-with-depends)
3. FRR stop, start, restart
4. Networking restart
5. Configuration delete and readd
Some of the above tests run in different sequences (manually).
|
|
This is a preparatory work for configuring vrf/frr over netns
vrf structure is being changed to 32 bit, and the VRF will have the
possibility to have a backend made up of NETNS.
Let's put some history.
Initially the 32 bit was because one wanted to map on vrf_id both the
VRFLITE and the NSID.
Initially, one would have liked to make zebra configure at the same time
both vrf lite and vrf from netns in a flat way. From the show
running perspective, one would have had both kind of vrfs, thatone
would configure on the same way.
however, it leads to inconsistencies in concepts, because it mixes vrf
vrf with vrf, and vrf is not always mapped with netns.
For instance, logical-router could also be used with netns. In that
case, it would not be possible to map vrf with netns.
There was an other reason why 32 bit is proposed. this is because
some systems handle NSID to 32 bits. As vrf lite exists only on
Linux, there are other systems that would like to use an other vrf
backend than vrf lite. The netns backend for vrf will be used for that
too. for instance, for windows or freebsd, some similar
netns concept exists; so it will be easier to reuse netns
backend for vrf, than reusing vrflite backend for vrf.
This commit is here to extend vrf_id to 32 bits. Following commits in a
second step will help in enable a VRF backend.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
|
|
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
|
|
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
|
|
Note: I had to remove one assert in clidef.py in order to fix a build
error when using a preprocessor string (FRR_IP_REDIST_STR_ZEBRA) inside
a DEFPY command. This should be revisited later.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
|
|
Performance tests showed that, when running on a system with a large
number of interfaces, some daemons would spend a considerable amount
of time in the if_lookup_by_index() function. Introduce a new rb-tree
to solve this problem.
With this change, we need to use the if_set_index() function whenever
we want to change the ifindex of an interface. This is necessary to
ensure that the 'ifaces_by_index' rb-tree is updated accordingly. The
return value of all insert/remove operations in the interface rb-trees
is checked to ensure that an error is logged if a corruption is
detected.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
|
|
This is an important optimization for users running FRR on systems with
a large number of interfaces (e.g. thousands of tunnels). Red-black
trees scale much better than sorted linked-lists and also store the
elements in an ordered way (contrary to hash tables).
This is a big patch but the interesting bits are all in lib/if.[ch].
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
|
|
indent.py `git ls-files | pcregrep '\.[ch]$' | pcregrep -v '^(ldpd|babeld|nhrpd)/'`
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Should be able to fit more vty_out onto one line now
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
|
|
pim controls the vrf table creation for due to the way that
pim must interact with the kernel. In order to match the
table_id for unicast <-> multicast( not necessary but a
real nice to have ) we need to pass up from zebra the
table_id associated with the vrf.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
|
|
Vrf stuff
|
|
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
|
|
We only needed to add/change the vrf callbacks when we initialize
the vrf subsystem. As such it is not necessary to handle the callbacks
in any other way than through the init function.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
|
|
vrf_iflist_create -> By the time this is called in enable, the vrf's iflist
is already created. Additionally this code should be a properly of the vrf
to init/destroy not someone else.
vrf_iflist_terminate -> This function should be a property of vrf deletion
and does not need to be exposed.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
|
|
Segregate the vrf enable/disable functionality from other vrf
code. This is to ensure that people are not actually using
the functions when they should not be. Also document the
why of it properly in the new vrf_int.h header.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
|
|
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Allow the specification of a VRF_ALL to be
used for CLI.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
|
|
WARNING: Merge contains nontrivial fixups in vrf_cmd handling.
Conflicts:
lib/if.c
zebra/interface.c
|
|
Conflicts:
bgpd/bgp_route.c
lib/if.c
ripd/rip_interface.c
zebra/interface.c
zebra/zebra_vty.c
|
|
There's no need to duplicate the 'vrf_id' and 'name' fields from the 'vrf'
structure into the 'zebra_vrf' structure. Instead of that, add a back
pointer in 'zebra_vrf' that should point to the associated 'vrf' structure.
Additionally, modify the vrf callbacks to pass the whole vrf structure
as a parameter. This allow us to make further simplifications in the code.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
|
|
Also, for some reason we had two functions to search a VRF by its name:
zebra_vrf_lookup_by_name() and zebra_vrf_list_lookup_by_name(). The first
one would loop through vrf_table and the other one through vrf_list. This
is not necessary anymore, so remove zebra_vrf_lookup_by_name() and rename
zebra_vrf_list_lookup_by_name() to zebra_vrf_lookup_by_name().
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
|
|
Since we're already using a red-black tree to store VRFs sorted by their
vrf_id's, create a new tree to store VRFs sorted by their names.
The biggest advantage of doing this is that we reduce the time complexity
of vrf_list_lookup_by_name() from O(n) to O(log n).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
|
|
Since VRFs can be searched by vrf_id or name, make this explicit in the
helper functions.
s/vrf_lookup/vrf_lookup_by_id/
s/zebra_vrf_lookup/zebra_vrf_lookup_by_id/
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
|
|
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
|
|
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Conflicts:
bgpd/bgp_route.c
bgpd/bgp_routemap.c
bgpd/bgp_vty.c
isisd/isis_redist.c
isisd/isis_routemap.c
isisd/isis_vty.c
isisd/isisd.c
lib/command.c
lib/distribute.c
lib/if.c
lib/keychain.c
lib/routemap.c
lib/routemap.h
ospf6d/ospf6_asbr.c
ospf6d/ospf6_interface.c
ospf6d/ospf6_neighbor.c
ospf6d/ospf6_top.c
ospf6d/ospf6_zebra.c
ospf6d/ospf6d.c
ospfd/ospf_routemap.c
ospfd/ospf_vty.c
ripd/rip_routemap.c
ripngd/ripng_routemap.c
vtysh/extract.pl.in
vtysh/vtysh.c
zebra/interface.c
zebra/irdp_interface.c
zebra/rt_netlink.c
zebra/rtadv.c
zebra/test_main.c
zebra/zebra_routemap.c
zebra/zebra_vty.c
|
|
This places the appropriate calls so library objects can be used with
qobj "pointers", especially in the CLI.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
|
|
This reverts commit 2511cb40e6b0e88620f26b3506b2a454a773c93d.
|
|
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
|
|
The VRF_GET_ID macro should respect the VRF_UNKNOWN
as a notice that the vrf is not active.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
|
|
Create the idea of a VRF_UNKNOWN, this is for a vrf where we don't
yet have the vrf_id for it yet.
Refactor the vrf_create code out of existence. We had two code
paths vrf_create and vrf_get. We should use vrf_get to create
the new vrf since XXX_get() creates the data structures now.
Signed-off-by: Donald Sharp
Reviewed-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
|
|
vrf_create does not need the string length of the vrf.
Remove it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
|
|
ZEBRA_VRF_ACTIVE is a poor name for when a vrf is
actually active. Rename VRF_ACTIVE.
Ticket: CM-10338
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Radhika Mahankali <radhika@cumulusnetworks.com>
|
|
We had two functions XXX_name and XXX_name_len
that both did the same thing. Remove the
XXX_rename_len functions.
Ticket: CM-10338
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Radhika Mahankali <radhika@cumulusnetworks.com>
|
