| Age | Commit message (Collapse) | Author |
|---|
|
This places the appropriate calls so library objects can be used with
qobj "pointers", especially in the CLI.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
This is a rather large mechanical commit that splits up the memory types
defined in lib/memtypes.c and distributes them into *_memory.[ch] files
in the individual daemons.
The zebra change is slightly annoying because there is no nice place to
put the #include "zebra_memory.h" statement.
bgpd, ospf6d, isisd and some tests were reusing MTYPEs defined in the
library for its own use. This is bad practice and would break when the
memtype are made static.
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
[CF: rebased for cmaster-next]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
|
|
Resolved several memory leaks caused by ifdown/ifup the vrf device or
a swp port. For bgp/zebra/ospf/ospf6, bouncing the vrf device would cause
a linked list, Interface, and route-table to get leaked. For ospf6,
bouncing the swp device also caused leaks of Connected and Prefix entries.
Ticket: CM-10841
Signed-off-by: Don Slice
Reviewed-By: Donald Sharp
Testing Done: Manual testing, bgp and ospf mins passed, smokes had fewer failures than base
|
|
The check for the fact a vrf was enabled
was immediately after we disabled it in vrf_disable()
Ticket: CM-10139
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
|
|
"Vrf found: %p" was not protected by a debug
check and as such we were seeing allot of
extraneous output.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
|
|
vrf_get has these possible lookup/creation ways of being called.
name = NULL, vrf_id = VRF_UNKNOWN
Nothing to do here.
name = NULL, vrf_id != VRF_UNKNOWN
Look up the vrf_id in the table. Return that created vrf.
If not found create a struct vrf to hold it properly.
name = <something>, vrf_id = VRF_UNKNOWN
Look up the name in the vrf list, if found return that vrf.
If not found create the vrf and zvrf
name = <something>, vrf_id != VRF_UNKNOWN
Look up the name in the vrf list, if found check to see
if the vrf->vrf_id is VRF_UNKNOWN, if so match up and return
If not found, create the vrf and table entry and return
Ticket: CM-10139
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
|
|
Changed vrf_get to only create a route-node if the kernel has enabled the vrf,
supplying a table-id. If the quagga configuration contains vrfs that have not
yet been enabled by the kernel, the vrf is created with a vrf_id of VRF_UNKNOWN.
These vrfs are added to the vrf_list so they contain a zvrf and configuration,
but the route-node is not created until the kernel has signalled that the vrf
has been defined and enabled.
Ticket: CM-10481
Signed-off-by: Don Slice
Reviewed-by: Donald Sharp
|
|
The vrf_add_update function does not need to exist.
Move it's constituent parts into the appropriate
vrf_create/vrf_enable functionality as well as
move the zebra_vrf_add_update() function call
into zebra_vrf_enable()
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
|
|
vrf_delete_update really belongs in vrf.c broken up
into it's appropriate places.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
|
|
Create the idea of a VRF_UNKNOWN, this is for a vrf where we don't
yet have the vrf_id for it yet.
Refactor the vrf_create code out of existence. We had two code
paths vrf_create and vrf_get. We should use vrf_get to create
the new vrf since XXX_get() creates the data structures now.
Signed-off-by: Donald Sharp
Reviewed-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
|
|
vrf_create does not need the string length of the vrf.
Remove it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
|
|
The file if.c has a iflist that had the list of interfaces
in the default vrf. Remove this variable and replace
with a vrf_iflist lookup on the default vrf where it
was used.
Additionally, modify ptm code to iterate over all vrf's
when enabling ptm.
Ticket: CM-10338
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Radhika Mahankali <radhika@cumulusnetworks.com>
|
|
ZEBRA_VRF_ACTIVE is a poor name for when a vrf is
actually active. Rename VRF_ACTIVE.
Ticket: CM-10338
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Radhika Mahankali <radhika@cumulusnetworks.com>
|
|
We had two functions XXX_name and XXX_name_len
that both did the same thing. Remove the
XXX_rename_len functions.
Ticket: CM-10338
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Radhika Mahankali <radhika@cumulusnetworks.com>
|
|
Initialize a variable to prevent warnings.
Updates: 8087b296b4750eda2d34e4f48731f81415bdccd2
Ticket: CM-10258
Reviewed By: Trivial
Testing Done: None
|
|
In function vrf_get(), an early call to vrf_get_by_name() may end up
creating the Zebra VRF structure prior to the VRF id being set,
resulting in various other misbehavior. Fix this with appropriate
changes.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Ticket: CM-10258
Reviewed By: CCR-4418
Testing Done: Manual
|
|
This commit fixes two issues:
1) The creation of a new vrf from the cli was not calling the vrf_create hook.
This is fixed.
2) The zebra_vrf_delete callback was deleting interface information that
belonged to vrf not zvrf. Remove the code as that it was not it's job
to do so.
Ticket: CM-10100
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
|
|
The vrf name comparison function was the same as the interface
comparison function. Combine the forces for the goodness of
mankind.
Ticket: CM-10184
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
|
|
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Ticket: CM-10098
Reviewed By: CCR-4368
Testing Done: Verified on failed node
|
|
The BGP instance cleanup was deleting interfaces in that instance after
prior fixes, but this ended up deleting the interface list header which
was not being re-created. Added code to re-create this at the time an
instance is created.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Ticket: CM-9466
Reviewed By: CCR-4164
Testing Done: Manual and verified failed test
|
|
Perform interface cleanup as an instance is deleted. This takes care of the
scenario when BGP exits (or is stopped/restarted) too as instances undergo
deletion and the interface cleanup is done as the last step in that.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Fixes: 46abd3e3e6eb1f723ea7905c9919b65f1a76f385
Ticket: CM-9410
Reviewed By: CCR-4143
Testing Done: Reran failed test
|
|
Fixup the debug handling of vrf's to be a bit
more explicit how we create a vrf internally.
Add code to turn on/off debugging of vrf's.
Ticket: CM-9063
Testing: Manual
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
|
|
Abstract vrf.c code to allow pass in a vrf name as well as to
start the coding of how namespaces and vrf's will interact.
Signed-off-by: Vipin Kumar <vipin@cumulusnetworks.com>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
|
|
The API messages are used by zebra to exchange the interfaces, addresses,
routes and router-id information with its clients. To distinguish which
VRF the information belongs to, a new field "VRF ID" is added in the
message header. And hence the message version is increased to 3.
* The new field "VRF ID" in the message header:
Length (2 bytes)
Marker (1 byte)
Version (1 byte)
VRF ID (2 bytes, newly added)
Command (2 bytes)
- Client side:
- zclient_create_header() adds the VRF ID in the message header.
- zclient_read() extracts and validates the VRF ID from the header,
and passes the VRF ID to the callback functions registered to
the API messages.
- All relative functions are appended with a new parameter "vrf_id",
including all the callback functions.
- "vrf_id" is also added to "struct zapi_ipv4" and "struct zapi_ipv6".
Clients need to correctly set the VRF ID when using the API
functions zapi_ipv4_route() and zapi_ipv6_route().
- Till now all messages sent from a client have the default VRF ID
"0" in the header.
- The HELLO message is special, which is used as the heart-beat of
a client, and has no relation with VRF. The VRF ID in the HELLO
message header will always be 0 and ignored by zebra.
- Zebra side:
- zserv_create_header() adds the VRF ID in the message header.
- zebra_client_read() extracts and validates the VRF ID from the
header, and passes the VRF ID to the functions which process
the received messages.
- All relative functions are appended with a new parameter "vrf_id".
* Suppress the messages in a VRF which a client does not care:
Some clients may not care about the information in the VRF X, and
zebra should not send the messages in the VRF X to those clients.
Extra flags are used to indicate which VRF is registered by a client,
and a new message ZEBRA_VRF_UNREGISTER is introduced to let a client
can unregister a VRF when it does not need any information in that
VRF.
A client sends any message other than ZEBRA_VRF_UNREGISTER in a VRF
will automatically register to that VRF.
- lib/vrf:
A new utility "VRF bit-map" is provided to manage the flags for
VRFs, one bit per VRF ID.
- Use vrf_bitmap_init()/vrf_bitmap_free() to initialize/free a
bit-map;
- Use vrf_bitmap_set()/vrf_bitmap_unset() to set/unset a flag
in the given bit-map, corresponding to the given VRF ID;
- Use vrf_bitmap_check() to test whether the flag, in the given
bit-map and for the given VRF ID, is set.
- Client side:
- In "struct zclient", the following flags are changed from
"u_char" to "vrf_bitmap_t":
redist[ZEBRA_ROUTE_MAX]
default_information
These flags are extended for each VRF, and controlled by the
clients themselves (or with the help of zclient_redistribute()
and zclient_redistribute_default()).
- Zebra side:
- In "struct zserv", the following flags are changed from
"u_char" to "vrf_bitmap_t":
redist[ZEBRA_ROUTE_MAX]
redist_default
ifinfo
ridinfo
These flags are extended for each VRF, as the VRF registration
flags. They are maintained on receiving a ZEBRA_XXX_ADD or
ZEBRA_XXX_DELETE message.
When sending an interface/address/route/router-id message in
a VRF to a client, if the corresponding VRF registration flag
is not set, this message will not be dropped by zebra.
- A new function zread_vrf_unregister() is introduced to process
the new command ZEBRA_VRF_UNREGISTER. All the VRF registration
flags are cleared for the requested VRF.
Those clients, who support only the default VRF, will never receive
a message in a non-default VRF, thanks to the filter in zebra.
* New callback for the event of successful connection to zebra:
- zclient_start() is splitted, keeping only the code of connecting
to zebra.
- Now zclient_init()=>zclient_connect()=>zclient_start() operations
are purely dealing with the connection to zbera.
- Once zebra is successfully connected, at the end of zclient_start(),
a new callback is used to inform the client about connection.
- Till now, in the callback of connect-to-zebra event, all clients
send messages to zebra to request the router-id/interface/routes
information in the default VRF.
Of corse in future the client can do anything it wants in this
callback. For example, it may send requests for both default VRF
and some non-default VRFs.
Signed-off-by: Feng Lu <lu.feng@6wind.com>
Reviewed-by: Alain Ritoux <alain.ritoux@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
Conflicts:
lib/zclient.h
lib/zebra.h
zebra/zserv.c
zebra/zserv.h
Conflicts:
bgpd/bgp_nexthop.c
bgpd/bgp_nht.c
bgpd/bgp_zebra.c
isisd/isis_zebra.c
lib/zclient.c
lib/zclient.h
lib/zebra.h
nhrpd/nhrp_interface.c
nhrpd/nhrp_route.c
nhrpd/nhrpd.h
ospf6d/ospf6_zebra.c
ospf6d/ospf6_zebra.h
ospfd/ospf_vty.c
ospfd/ospf_zebra.c
pimd/pim_zebra.c
pimd/pim_zlookup.c
ripd/rip_zebra.c
ripngd/ripng_zebra.c
zebra/redistribute.c
zebra/rt_netlink.c
zebra/zebra_rnh.c
zebra/zebra_rnh.h
zebra/zserv.c
zebra/zserv.h
|
|
A new API vrf_is_enabled() is defined to check whether a VRF is ready
to use, that is, to allocate resources in that VRF. Currently there's
only one type of resource: socket.
Two new hooks VRF_ENABLE_HOOK/VRF_DISABLE_HOOK are introduced to tell
the user when a VRF gets ready or to be unavailable.
The VRF_ENABLE_HOOK callback is called in the new function vrf_enable(),
which is used to let the VRF be ready to use. Till now, only the default
VRF can be enabled, and we need do nothing to enable the default, except
calling the hook.
The VRF_DISABLE_HOOK callback is called in the new function
vrf_disable(), which is used to let the VRF be unusable. Till now,
it is called only when the VRF is to be deleted.
A new utility vrf_socket() is defined to provide a socket in a given
VRF to the user.
Till now before introducing a way of VRF realization, only the default
VRF is enabled since its birth, and vrf_socket() creates socket for
only the default VRF.
This patch defines the framework of the VRF APIs. The way they serve
the users is:
- vrf_is_enabled() is used to tell the user whether a VRF is usable;
- users are informed by the VRF_ENABLE_HOOK that a VRF gets usable;
they can allocate resources after that;
- users are informed by the VRF_DISABLE_HOOK that a VRF is to be
unavailable, and they must release the resources instantly;
- vrf_socket() is used to provide a socket in a given VRF.
Signed-off-by: Feng Lu <lu.feng@6wind.com>
Reviewed-by: Alain Ritoux <alain.ritoux@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
An interface belongs to a specific VRF. So move the interface list
into the "struct vrf".
* vrf.c/vrf.h:
- add a new member "struct list *iflist" to the the "struct vrf";
- call if_init() in vrf_new();
- call if_terminate() in vrf_delete();
- add utilities to access the interface list and VRF ID in the
specified VRF.
* if.c/if.h:
- the global "iflist" now only exists for the default VRF;
- the global "if_master" is initialized on the definition;
- in if_create(), the interface is added into the list in the
specified VRF; if the VRF does not exist, create one;
- add parameters to if_init()/if_terminate() so that the
interface list in the VRF can be initialized/destroyed;
- in if_dump_all() scan the interfaces in all the VRFs;
- add a command "show address vrf N" to show addresses in a
specified VRF;
- add a command "show address vrf all" to show addresses in all
VRFs;
- new APIs ifxxx_vrf() are added to access an interface in a
specified VRF.
The old interface APIs (the global variable "iflist" and the API
functions) are not changed to keep the backward compatibility.
The new APIs are used in the daemons which support multiple VRFs
(till now only zebra).
Signed-off-by: Feng Lu <lu.feng@6wind.com>
Reviewed-by: Alain Ritoux <alain.ritoux@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Conflicts:
lib/if.c
|
|
Later, an interface will belong to a specific VRF, and the interface
initialization will be a part of the VRF initialization. So now call
if_init() from vrf_init(), and if_terminate() from vrf_terminate().
Daemons have the according changes:
- if if_init() was called or "iflist" was initialized, now call
vrf_init() instead;
- if if_terminate() was called or "iflist" was destroyed, now call
vrf_terminate() instead.
Signed-off-by: Feng Lu <lu.feng@6wind.com>
Reviewed-by: Alain Ritoux <alain.ritoux@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Conflicts:
bgpd/bgp_main.c
pimd/pim_iface.c
pimd/pim_iface.h
pimd/pim_main.c
pimd/pimd.c
|
|
Previously "struct vrf" is defined locally in zebra. Now it is moved
to be a lib module.
This is the first step to support multi-VRF in quagga. The
implementation is splitted into small patches for the purpose of
easy review.
* lib:
"struct vrf" with basic members is defined in vrf.c. The member
"void *info" is for user data.
Some basic functions are defined in vrf.c for adding/deleting/
looking up a VRF, scanning the VRF table and initializing the
VRF module.
The type "vrf_id_t" is defined specificly for VRF ID.
* zebra:
The previous "struct vrf" is re-defined as "struct zebra_vrf";
and previous "vrf" variables are renamed to "zvrf".
The previous "struct vrf" related functions are removed from
zbera_rib.c. New functions are defined to maintain the new
"struct zebra_vrf".
The names vrf_xxx are reserved for the functions in VRF module.
So:
- the previous vrf_table() are renamed to zebra_vrf_table();
- the previous vrf_static_table() are renamed to
zebra_vrf_static_table().
The main logic is not changed.
BTW: Add a statement to zebra_snmp.c telling that the SNMP is
running only for the MIBs in the default VRF.
Signed-off-by: Feng Lu <lu.feng@6wind.com>
Reviewed-by: Alain Ritoux <alain.ritoux@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Conflicts:
lib/Makefile.am
zebra/zebra_rib.c
zebra/zebra_vty.c
Conflicts:
lib/Makefile.am
lib/memtypes.c
zebra/rib.h
zebra/zebra_rib.c
zebra/zebra_rnh.c
zebra/zebra_rnh.h
zebra/zebra_vty.c
|
