| Age | Commit message (Collapse) | Author |
|---|
|
The configured OSPF refresh interval was not being used for opaque LSA (it always used the constant). Also, modified the timers lsa min-arrival command to have a maximum of 5000 msecs as well as providing a path for backward command compatibility.
Added missing user documentation for both timers lsa min-arrival and timers throttle lsa all.
Signed-off-by: Acee Lindem <acee@lindem.com>
|
|
1. On P2MP interfaces, direct ack would include the same LSA multiple times
multiple packets are processed before the OSPF interfae direct LSA
acknowledgment event is processed. Now duplicates LSA in the same event
are suppressed.
2. On non-broadcast interfaces, direct acks for multiple neighbors would be
unicast to the same neighbor due to the multiple OSPF LS Update packets
being process prior to the OSPF interface direct ack event. Now, separate
direct acks are unicast to the neighbors requiring them.
3. The interface delayed acknowledgment timer runs would run continously
(every second as long as the interace is up). Now, the timer is set
when delayed acknowledgments are queued and all queued delayed
acknowledges are sent when it fires.
4. For non-broadcast interface delayed acknowledgments, the logic to send
to multiple neighbors wasn't working because the list was emptied while
building the packet for the first neighbor.
Signed-off-by: Acee Lindem <acee@lindem.com>
|
|
The current OSPF neighbor retransmission operates on a single per-neighbor
periodic timer that sends all LSAs on the list when it expires.
Additionally, since it skips the first retransmission of received LSAs so
that at least the retransmission interval (resulting in a delay of between
the retransmission interval and twice the interval. In environments where
the links are lossy on P2MP networks with "delay-reflood" configured (which
relies on neighbor retransmission in partial meshs), the implementation
is sub-optimal (to say the least).
This commit reimplements OSPF neighbor retransmission as follows:
1. A new data structure making use the application managed
typesafe.h doubly linked list implements an OSPF LSA
list where each node includes a timestamp.
2. The existing neighbor LS retransmission LSDB data structure
is augmented with a pointer to the list node on the LSA
list to faciliate O(1) removal when the LSA is acknowledged.
3. The neighbor LS retransmission timer is set to the expiration
timer of the LSA at the top of the list.
4. When the timer expires, LSAs are retransmitted that within
the window of the current time and a small delta (50 milli-secs
default). The LSAs that are retransmited are given an updated
retransmission time and moved to the end of the LSA list.
5. Configuration is added to set the "retransmission-window" to a
value other than 50 milliseconds.
6. Neighbor and interface LSA retransmission counters are added
to provide insight into the lossiness of the links. However,
these will increment quickly on non-fully meshed P2MP networks
with "delay-reflood" configured.
7. Added a topotest to exercise the implementation on a non-fully
meshed P2MP network with "delay-reflood" configured. The
alternative was to use existing mechanisms to instroduce loss
but these seem less determistic in a topotest.
Signed-off-by: Acee Lindem <acee@lindem.com>
|
|
This extends non-broadcast support to point-to-multipoint networks.
Neighbors will be explicitly configured and polled in lieu of multicast
dicovery. Toptotests and documentation updates are included.
Additionally, the ospf neighbor commands have been greatly simplified taking
advantage of DEFPY() capabilities.
The AllOSPFRouters (224.0.0.5) is still joined for non-broadcast networks
since it is joined for NBMA networks. It seems this could be removed but
it should done be in a separate commit.
Signed-off-by: Acee Lindem <acee@lindem.com>
|
|
Fix reference bandwidth description. It is Kbps, not Mbps.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
|
|
Signed-off-by: Acee <aceelindem@gmail.com>
|
|
Add support for "[no] ip ospf capbility opaque" at the interface
level with the default being capability opaque enabled. The command
"no ip ospf capability opaque" will disable opaque LSA database
exchange and flooding on the interface. A change in configuration
will result in the interface being flapped to update our options
for neighbors but no attempt will be made to purge existing LSAs
as in dense topologies, these may received by neighbors through
different interfaces.
Topotests are added to test both the configuration and the LSA
opaque flooding suppression.
Signed-off-by: Acee <aceelindem@gmail.com>
|
|
Currently, delayed reflooding on P2MP interfaces for LSAs received
from neighbors on the interface is unconditionally (see commit
c706f0e32ba8aa8780a0618b6fbba364c383ae05). In some cases, this
change wasn't desirable and this feature makes delayed reflooding
configurable for P2MP interfaces via the CLI command:
"ip ospf network point-to-multipoint delay-reflood" in interface
submode.
Signed-off-by: Acee <aceelindem@gmail.com>
|
|
This command makes unplanned GR more reliable by manipulating the
sending of Grace-LSAs and Hello packets for a certain amount of time,
increasing the chance that the neighboring routers are aware of
the ongoing graceful restart before resuming normal OSPF operation.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
|
|
Done with a combination of regex'ing and banging my head against a wall.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Steps to reproduce:
--------------------------
1. ANVL: Establish full adjacency with DUT for neighbor Rtr-0-A on DIface-0 with DUT as DR.
2. ANVL: Listen (for up to 2 * <RxmtInterval> seconds) on DIface-0.
3. DUT: Send <OSPF-LSU> packet.
4. ANVL: Verify that the received <OSPF-LSU> packet contains a Network- LSA for network N1
originated by DUT, and the LS Sequence Number is set to <InitialSequenceNumber>.
5. ANVL: Establish full adjacency with DUT for neighbor Rtr-0-B on DIface-0 with DUT as DR.
6. ANVL: Listen (for up to 2 * <RxmtInterval> seconds) on DIface-0.
7. DUT: Send <OSPF-LSU> packet.
8. ANVL: Verify that the received <OSPF-LSU> packet contains a new instance of the
Network-LSA for network N1 originated by DUT, and the LS Sequence Number
is set to (<InitialSequenceNumber> + 1).
Both the test cases were failing while verifying the initial sequence number for network LSA.
This is because currently OSPF does not reset its LSA sequence number when it is going down.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
|
|
Signed-off-by: ewlumpkin <ewlumpkin@gmail.com>
|
|
These are necessary to use functions defined in these headers from C++.
Signed-off-by: David Lamparter <equinox@diac24.net>
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
|
|
If OSPF_LS_REFRESH_TIME is 60, min_delay in ospf_refresher_register_lsa
function (ospf_lsa.c) would be negative, so index (which is unsigned)
would be out of range, causing a segfault.
Signed-off-by: ßingen <bingen@voltanet.io>
|
|
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Prior to this change, interface bandwidth could not be defined above 10G. With
the use of higher speed interfaces, the ability to effectively define the path
links was highly impacted. Additionally, the default auto-cost reference-bandwidth
for ospf and ospfv3 was set to 100M, which relects a much earlier time. Changed both
the range of interface bandwidth definitions and reference bandwidths to be up to
100G. Set the default interface bandwidth (if not defined) to 10G to make the ratio
continue to cause a cost of 10 as before. Manual testing as well as ospf-min and
ospf-smoke passed successfully.
Ticket: CM-10756
Signed-of-by: Don Slice
Reviewed-by: Donald Sharp
|
|
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-7901
|
|
Allow configuration of faster OSPF convergence via the
min_ls_interval and min_ls_arrival timer lengths.
This patch was originated by Michael, and cross-ported
to Cumulus's Quagga.
Signed-off-by: Michael Rossberg <michael.rossberg@tu-ilmenau.de>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
|
|
Remove compile warnings for the lib directory
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by:
|
|
timers lsa min-arrival <1-60000>
Signed-off-by: Vipin Kumar <vipin@cumulusnetworks.com>
Reviewed-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
|
|
Support stubby and totally stubby areas in OSPFv3
Signed-off-by: Dinesh G Dutt <ddutt at cumulusnetworks.com>
Reviewed-by: Pradosh Mohapatra <pmohapat at cumulusnetworks.com>
|
|
OSPFv3: Add ABR support and make ECMP > 4.
Signed-off-by: Dinesh G Dutt <ddutt at cumulusnetworks.com>
Signed-off-by: Pradosh Mohapatra <pmohapat at cumulusnetworks.com>
|
|
Signed-off-by: Dinesh G Dutt <ddutt at cumulusnetworks.com>
Signed-off-by: Ayan Banerjee <ayabaner at gmail.com>
Reviewed-by: Scott Feldman <sfeldma at cumulusnetworks.com>
Reviewed-by: James Li <jli at cumulusnetworks.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
MaxAge LSAs are being flushed out only on an event, unlike OSPFv2 where they're flushed out
periodically. This causes certain LSAs to hang around forever, never getting flushed out.
This patch makes flushing out MaxAge LSAs periodic, retriggered after a certain period if
not all MaxAge LSAs were flushed out.
Signed-off-by: Dinesh G Dutt <ddutt at cumulusnetworks.com>
Reviewed-by: Scott Feldman <sfeldma at cumulusnetworks.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Rearranging common defs and structures for use betweeen OSPFv2 and
OSPFv3. Created a new file called libospf.h under lib directory to
hold defines that are common between OSPFv2 and OSPFv3 code bases.
[DL: split of defines refactor from timer refactor]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
