| Age | Commit message (Collapse) | Author |
|---|
|
Let's find a better name for it.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
Convert the `struct thread_master` to `struct event_master`
across the code base.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
Done with a combination of regex'ing and banging my head against a wall.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Daemons like staticd already implement nexthop zapi (un)registration.
b7ca809d1c ("lib: BFD automatic source selection") has implemented a
concurrent nexthop (un)registration. Some nexthop could be unregistred
by the bfd whereas they were still needed by the daemon.
Let the deamons deal with nexthop zapi (un)registration.
Fixes: b7ca809d1c ("lib: BFD automatic source selection")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
|
|
b7ca809d1c ("lib: BFD automatic source selection") has added a dedicated
zclient socket for nht tracking. Since the bfd lib is used by daemons
that already has a zclient socket, those daemons has now a second
zclient socket. However, zebra does not distinguish the two zclient
sessions. For example, the interfaces are asked a second via
zebra_message_send(zclient, ZEBRA_INTERFACE_ADD, VRF_DEFAULT) in
zclient_start(). As a result, callbacks functions like bgp_ifp_create()
are called a second time, which causes some processing overhead and
might cause bugs.
Re-use the existing zclient socket for nht tracking.
Note that BFD automatic source selection is only currently implemented
in staticd. Other daemons will require to add the following in their
ZEBRA_NEXTHOP_UPDATE callback function:
> if (zclient->bfd_integration)
> bfd_nht_update(&matched, &nhr);
Fixes: b7ca809d1c ("lib: BFD automatic source selection")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
|
|
Implement new BFD library issue to allow protocols to configure BFD
sessions with automatic source selection.
The source selection will be based on the Next Hop Tracking feature:
`zebra` will do RIB lookups to determine the output interface and the
primary source address of that interface will be used as source.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
|
|
As to "struct bfd_session_arg", just rename parameter "ttl" to "hops", in order
to reflect real meaning.
Signed-off-by: anlan_cs <anlan_cs@tom.com>
|
|
There are two APIs to control the expected number of hops for a BFD
session – `bfd_sess_set_mininum_ttl` and `bfd_sess_set_hop_count`.
The former is very confusing, as it takes an expected TTL in the
BFD packet which is actually a protocol internal value. The latter is
simple and straightforward – it takes an expected number of hops, which
is always 1 for single-hop and >1 for multi-hop.
As the former API is not used anywhere, just remove it to avoid any
confusion.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
|
|
Constify some BFD library function parameters to signalize they are
not going to get modified.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
|
|
This commit also adds missing `bfd_protocol_integration_set_shutdown` to
ospf6d and pimd.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
|
|
Don't uninstall sessions if the address, interface, VRF or TTL didn't change.
Update the library documentation to make it clear to other developers.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
|
|
Currently this flag is only helpful in an extremely rare situation when
the BFD session registration was unsuccessful and after that zebra is
restarted. Let's remove this flag to simplify the API. If we ever want
to solve the problem of unsuccessful registration/deregistration, this
can be done using internal flags, without API modification.
Also add the error log to help user understand why the BFD session is
not working.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
|
|
New BFD protocol integration API with abstractions to fix most common
protocol integration errors:
- Set address family together with the source/destination addresses
- Set the TTL together with the single/multi hop option
- Set/unset profile/interface easily
- Keep the arguments so we don't have to rebuild them every time
- Install/uninstall functions that keep track of current state so the
daemon doesn't have to
- Reinstall when critical configuration changes (address, multi hop
etc...)
- Reconfigure BFD when the daemon restarts automatically
- Automatically calls the user defined callback for session update
- Shutdown handler for all protocols
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
|
|
BFD profiles can now be used on the interface level like this:
interface eth1
ip router isis 1
isis bfd
isis bfd profile default
Here the 'default' profile needs to be specified as usual in the
bfdd configuration.
Signed-off-by: GalaxyGorilla <sascha@netdef.org>
|
|
Implement the infrastructure for other protocols daemon (e.g. `bgpd`,
`ospfd`, `isisd` etc...) to communicate to BFD daemon which profile
they want to use with their peers.
It was also added the ability for protocols to change profile while
running (no need to remove the registration and then register again).
The protocols message building function was rewritten to support
multiple arguments through `struct bfd_session_arg`, so we can
implement new features without the need of changing function
prototypes. The old function was also rewritten to keep
compatibility.
The profile message part is only available for BFD daemon at the
moment.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
|
|
Scenarios where this code change is required:
1. BFD is un-configured from BGP at remote end.
Neighbour BFD sends ADMIN_DOWN state, but BFD on local side will send
DOWN to BGP, resulting in BGP session DOWN.
Removing BFD session administratively shouldn't bring DOWN BGP session
at local or remote.
2. BFD is un-configured from BGP or shutdown locally.
BFD will send state DOWN to BGP resulting in BGP session DOWN.
(This is akin to saying do not use BFD for BGP)
Removing BFD session administratively shouldn't bring DOWN BGP session at
local or remote.
Signed-off-by: Sayed Mohd Saquib sayed.saquib@broadcom.com
|
|
new vty command is added:
neighbor XXX bfd check-control-plane-failure
this command will enforce the check of bgp controlplane, when bfd
detects changes in the dataplane.
- at configuration, the cbit will be set if that command is executed
- at flapping time, if the command is configured and remote cbit is set
accordingly, then the bfd event will be ignored.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
|
|
bfd cbit is a value carried out in bfd messages, that permit to keep or
not, the independence between control plane and dataplane. In other
words, while most of the cases plan to flush entries, when bfd goes
down, there are some cases where that bfd event should be ignored. this
is the case with non stop forwarding mechanisms where entries may be
kept. this is the case for BGP, when graceful restart capability is
used. If BFD event down happens, and bgp is in graceful restart mode, it
is wished to ignore the BFD event while waiting for the remote router to
restart.
The changes take into account the following:
- add a config flag across zebra layer so that daemon can set or not the
cbit capability.
- ability for daemons to read the remote bfd capability associated to a bfd
notification.
- in bfdd, according to the value, the cbit value is set
- in bfdd, the received value is retrived and stored in the bfd session
context.
- by default, the local cbit announced to remote is set to 1 while
preservation of the local path is not set.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
|
|
vrf_id parameter is added to the api of bfd_client_sendmsg().
this permits being registered to bfd from a separate vrf.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
|
|
These are necessary to use functions defined in these headers from C++.
Signed-off-by: David Lamparter <equinox@diac24.net>
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
|
|
Problem reported that some bgp and ospf json commands did not return
any json output at all if the bgp/ospf instance did not exist.
Additionally, some bgp and ospf json commands did not return any json
output if the instance existed but no neighbors were defined. This
fix makes these commands more consistent in returning empty braces for
json output and issue a message if not using json output. Additionally,
made the flag "use_json" a bool to make it consistent since previously,
it had been defined as an int, char, u_char, and bool at various places.
Ticket: CM-21040
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
|
|
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
|
|
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
|
|
indent.py `git ls-files | pcregrep '\.[ch]$' | pcregrep -v '^(ldpd|babeld|nhrpd)/'`
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
|
|
CM-10680
Issue: When BGP daemon is stopped, all the BGP BFD sessions are not getting deleted from PTM.
Root cause: BGP daemon stop causes BFD de-register message to be sent for every peer on which BFD is enabled. But, all the de-register messages from bgpd to zebra are not processed before the socket close. This results in some stale BGP BFD sessions.
Fix: Support for client de-register message has been added in PTM/BFD. Changes in Quagga to support BFD client de-registrations:
− The BFD clients de-registration is sent directly from zebra daemon when zebra client (bgpd, ospfd and ospf6d) socket close is detected.
− Introduced a BFD flag for the zebra clients to prevent BFD de-registration messages from being sent to zebra daemon when the client is shutting down. This reduces the BFD messaging.
CM-10540
Issue: Invalid ptm status “fail” instead of “n/a” being displayed for VRF interfaces.
Root cause: ptm status is not being initialized to “unknown” status when VRF interface is added or changed. The uninitialized value is ‘0’ which is the value for “fail”
Fix: Initialized the ptm status to the correct value.
Signed-off-by: Radhika Mahankali <radhika@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Kanna Rajagopal <kanna@cumulusnetworks.com>
Ticket: CM-10680, CM-10540
Reviewed By: CCR-4653
Testing Done: PTM smoke, BGP smoke and ptmd_test.py:TestMultipleAddrsIntfOspfBgp
|
|
interface command
CM-10435
Issue: IBGP BFD sessions are created as multi-hop even though peer is single-hop away. This is causing an interop issue with ICOS.
Root Cause: By design all IBGP peers are registered with BFD as multi-hop.
Fix:
• Changed the default behavior of always treating IBGP BFD sessions as mult-hop. shared_network variable is used to determine whether the IBGP peer is single hop or multi-hop away. The logic for determining whether EBGP peer is single hop or multi-hop has not been changed.
• Since the default behavior has been changed, it will cause interop issues between 2.5 and 3.0 IBGP BFD sessions. A new hidden command “bfd multihop/singlehop” has been introduced to overcome the interop issues.
dell-s6000-10(config-router)# neighbor 30.0.2.6 bfd
<2-255> Detect Multiplier
<cr>
dell-s6000-10(config-router)# neighbor 30.0.2.6 bfd multihop
dell-s6000-10(config-router)# no neighbor 30.0.2.6 bfd multihop
dell-s6000-10(config-router)#
dell-s6000-10(config-router)# neighbor 30.0.2.6 bfd multihop
dell-s6000-10(config-router)# do show running-config
!
router bgp 100
neighbor igroup peer-group
neighbor igroup bfd 5 500 500
neighbor igroup bfd multihop
neighbor 30.0.2.2 remote-as 100
neighbor 30.0.2.2 peer-group igroup
neighbor 3101:abc:bcad::2 remote-as 100
neighbor 3101:abc:bcad::2 peer-group igroup
neighbor 30.0.2.6 remote-as 200
neighbor 30.0.2.6 bfd multihop
neighbor 3102:abc:bcad::6 remote-as 200
neighbor 3102:abc:bcad::6 bfd
neighbor 3102:abc:bcad::6 ebgp-multihop 255
!
CM-10260
Issue: “Unable to connect to socket” message keeps getting logged when ptmd process doesn’t exist.
Root Cause: BFD clients (bgpd, ospfd and ospf6d) during initialization try to register with BFD/PTM by default. This results in continuous logging If PTM does not exist since there is no max on number of retries.
Fix:
• Stop the retries to connect to PTM after max reconnect timer of 5 mins is reached.
• Added zebra debug event wrapper to message logging to prevent it from showing by default.
CM-4541
Issue: Addition of a new command "ptm-enable" or "no ptm-enable" per interface to enable/disable PTM link status checks for an interface.
Fix: Currently there is only one ptm-enable global command that enables/disables PTM status updates for all interfaces. This new command will give the handle to individually stop interface from reacting on the PTM status updates.
• by default interface uses the ptm-enable global configuration
• "no ptm-enable" on an interface will disable PTM status updates from taking affect for that interface. This can bring the interface up if it was brought down due to PTM status update.
• "ptm-enable" on an interface will cause the interface to fallback to the global ptm-enable configuration value and will bring the interface up or down based on the last stored PTM status update if global ptm is enabled.
Ticket: CM-10435, CM-10260 and CM-4541
Signed-off-by: Radhika Mahankali
Reviewed-by: Donald Sharp, Kanna Rajagopal
|
|
bfd was receiving a callback with an interface name string
but was ignoring the passed in vrf to find the ifp pointer.
This commit fixes that code path in bfd.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Radhika Mahankali <radhika@cumulusnetworks.com>
|
|
Ticket: CM-7615, CM-7773
Reviewed By: CCR-3610, CCR-3708
Testing Done: Unit, BGP Smoke and OSPF Smoke
Changes (70790261926b17200c8c9377c4576cd3b486fcef) ported from 2.5
Issue (related to CM-7615): 1. CM-7615: There is mismatch in the client name between ptm display of client BFD sessions and the zebra logs. For example, if bgpd added BFD session, zebra logs will show the client as “bgp” but the ptm display will show it as “quagga”
2. Bigger problem is when 2 clients (for example OSPF and BGP) from Quagga register for same BFD session and only one client de-registers the BFD session. This results in BFD session deletion from PTM even though other client still has the BFD registration.
Root Cause: Even though BGP, OSPF and OSPF6 are 3 different clients from Quagga that are trying to register/deregister BFD sessions with PTM, all 3 are represented as one client “quagga” from zebra. This makes it hard for PTM/BFD to distinguish between all three when BFD peer registration/deregistration happens from the clients.
Fix: Send the actual client name bgp, ospf or ospf6 from zebra with BFD reg/dereg messages instead of one unified client name “quagga”
CM-7773: BFD sessions are not getting cleaned from PTM even though no BGP peering exists in Quagga.
Root Cause: PTM cleans up stale BFD sessions from a client when it finds a change in seq id advertised by the client. But, if PTM never detects a change in the seq id then the stale BFD sessions never get cleaned up. The test restarts the quagga without saving the configuration, which results in no BGP peering. No BGP peers are registered with PTM after restart and PTM does not detect a client seq id change resulting in stale BFD sessions.
Fix: New client registration message was added in PTM. Every client that is interested in BFD monitoring will register with PTM with the client seq id. Client will register with a different seq id (typically pid) every time it restarts. This will help in detecting the change in seq id and cleanup of stale BFD sessions for a client.
Code Changes: To support the new client registration message following changes have been made
- Added support for client registration messaging in zebra for sending messages to PTM.
- Added support for client registration messaging between zebra and clients (BGP, OSPF and OSPF6) in BFD library.
- Expanded the reg/de reg peer messaging between zebra and clients to support client specific seq id to distinguish between multiple clients registering for BFD peer rather than one “quagga” client.
- Changes in bgpd, ospfd and ospf6d to send client registrations at the time of daemon initialization and on receiving BFD peer replay message.
|
|
The API messages are used by zebra to exchange the interfaces, addresses,
routes and router-id information with its clients. To distinguish which
VRF the information belongs to, a new field "VRF ID" is added in the
message header. And hence the message version is increased to 3.
* The new field "VRF ID" in the message header:
Length (2 bytes)
Marker (1 byte)
Version (1 byte)
VRF ID (2 bytes, newly added)
Command (2 bytes)
- Client side:
- zclient_create_header() adds the VRF ID in the message header.
- zclient_read() extracts and validates the VRF ID from the header,
and passes the VRF ID to the callback functions registered to
the API messages.
- All relative functions are appended with a new parameter "vrf_id",
including all the callback functions.
- "vrf_id" is also added to "struct zapi_ipv4" and "struct zapi_ipv6".
Clients need to correctly set the VRF ID when using the API
functions zapi_ipv4_route() and zapi_ipv6_route().
- Till now all messages sent from a client have the default VRF ID
"0" in the header.
- The HELLO message is special, which is used as the heart-beat of
a client, and has no relation with VRF. The VRF ID in the HELLO
message header will always be 0 and ignored by zebra.
- Zebra side:
- zserv_create_header() adds the VRF ID in the message header.
- zebra_client_read() extracts and validates the VRF ID from the
header, and passes the VRF ID to the functions which process
the received messages.
- All relative functions are appended with a new parameter "vrf_id".
* Suppress the messages in a VRF which a client does not care:
Some clients may not care about the information in the VRF X, and
zebra should not send the messages in the VRF X to those clients.
Extra flags are used to indicate which VRF is registered by a client,
and a new message ZEBRA_VRF_UNREGISTER is introduced to let a client
can unregister a VRF when it does not need any information in that
VRF.
A client sends any message other than ZEBRA_VRF_UNREGISTER in a VRF
will automatically register to that VRF.
- lib/vrf:
A new utility "VRF bit-map" is provided to manage the flags for
VRFs, one bit per VRF ID.
- Use vrf_bitmap_init()/vrf_bitmap_free() to initialize/free a
bit-map;
- Use vrf_bitmap_set()/vrf_bitmap_unset() to set/unset a flag
in the given bit-map, corresponding to the given VRF ID;
- Use vrf_bitmap_check() to test whether the flag, in the given
bit-map and for the given VRF ID, is set.
- Client side:
- In "struct zclient", the following flags are changed from
"u_char" to "vrf_bitmap_t":
redist[ZEBRA_ROUTE_MAX]
default_information
These flags are extended for each VRF, and controlled by the
clients themselves (or with the help of zclient_redistribute()
and zclient_redistribute_default()).
- Zebra side:
- In "struct zserv", the following flags are changed from
"u_char" to "vrf_bitmap_t":
redist[ZEBRA_ROUTE_MAX]
redist_default
ifinfo
ridinfo
These flags are extended for each VRF, as the VRF registration
flags. They are maintained on receiving a ZEBRA_XXX_ADD or
ZEBRA_XXX_DELETE message.
When sending an interface/address/route/router-id message in
a VRF to a client, if the corresponding VRF registration flag
is not set, this message will not be dropped by zebra.
- A new function zread_vrf_unregister() is introduced to process
the new command ZEBRA_VRF_UNREGISTER. All the VRF registration
flags are cleared for the requested VRF.
Those clients, who support only the default VRF, will never receive
a message in a non-default VRF, thanks to the filter in zebra.
* New callback for the event of successful connection to zebra:
- zclient_start() is splitted, keeping only the code of connecting
to zebra.
- Now zclient_init()=>zclient_connect()=>zclient_start() operations
are purely dealing with the connection to zbera.
- Once zebra is successfully connected, at the end of zclient_start(),
a new callback is used to inform the client about connection.
- Till now, in the callback of connect-to-zebra event, all clients
send messages to zebra to request the router-id/interface/routes
information in the default VRF.
Of corse in future the client can do anything it wants in this
callback. For example, it may send requests for both default VRF
and some non-default VRFs.
Signed-off-by: Feng Lu <lu.feng@6wind.com>
Reviewed-by: Alain Ritoux <alain.ritoux@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
Conflicts:
lib/zclient.h
lib/zebra.h
zebra/zserv.c
zebra/zserv.h
Conflicts:
bgpd/bgp_nexthop.c
bgpd/bgp_nht.c
bgpd/bgp_zebra.c
isisd/isis_zebra.c
lib/zclient.c
lib/zclient.h
lib/zebra.h
nhrpd/nhrp_interface.c
nhrpd/nhrp_route.c
nhrpd/nhrpd.h
ospf6d/ospf6_zebra.c
ospf6d/ospf6_zebra.h
ospfd/ospf_vty.c
ospfd/ospf_zebra.c
pimd/pim_zebra.c
pimd/pim_zlookup.c
ripd/rip_zebra.c
ripngd/ripng_zebra.c
zebra/redistribute.c
zebra/rt_netlink.c
zebra/zebra_rnh.c
zebra/zebra_rnh.h
zebra/zserv.c
zebra/zserv.h
|
|
Ticket:CM-6802, CM-6952
Reviewed By: Donald, Kanna
Testing Done:
Double commit of b76943235e09472ec174edcf7204fc82d27fe966 from br2.5. But, manually resolved all the compilation errors. Also, modified the shows to support the json format which was not supported in br2.5.
CM-6802 – Currently, BFD session status can be monitored only through ptmctl. There is no way to check the BFD status of a peer/neighbor through Quagga. Debugging becomes easier if BFD status is shown in Quagga too. BFD status is relevant when it is shown against the BGP peer/OSPF neighbor. For, this following code changes have been done:
- Only down messages from PTM were being propagated from Zebra daemon to clients (bgpd, ospfd and ospf6d). Now, both up and down messages are redistributed to the clients from zebra. BFD status field has been added to the messaging. Handling of BFD session up messages has been added to the client code. BGP/OSPF neighbor is brought down only if the old BFD session status is ‘Up’ to handle extra/initial down messages.
- BFD status and last update timestamp fields have been added to the common BFD info structure. Also, common show functions for showing BFD information have been added to BFD lib.
- Modified the BGP neighbor show functions to call common BFD lib functions.
- For ospf and ospf6, BFD information was maintained only at interface level. To show BFD status per neighbor, BFD information has been added at neighbor level too. “show ip ospf interface”, “show ip ospf neighbor detail”, “show ipv6 ospf6 interface” and “show ipv6 ospf6 neighbor detail” output have been modified to show BFD information.
CM-6952 - IBGP peers were always assumed to be multi-hop since there was no easy way to determine whether an IBGP peer was single hop or multihop unlike EBGP. But, this is causing problem with IBGP link local peers since BFD doesn't allow multihop BFD session with link local IP addresses. Link local peers were discovered when the interface peering was enabled. Interface peering is always singlehop. So, added checks to treat all interface based peers as single hop irrespective of whether the peer is IBGP or EBGP.
|
|
Ticket: None
Reviewed by: Trivial
Testing:
A bunch of warnings have crept in to the code base. This
fixes the issue
|
|
interactive mode of dynamically registering/deregistering neighbors discovered on BFD enabled interfaces with PTM/BFD through zebra. Neighbor is registered with BFD when 2-way adjacency is established and deregistered when adjacency goes down if the BFD is enabled on the interface through which the neighbor was discovered.
OSPF BFD command enhancement to configure BFD parameters (detect multiplier, min rx and min tx).
interface <if-name>
ip ospf bfd <detect mult> <min rx> <min tx>
This patch also adds BFD support for IPv6 OSPF. ospf6d will dynamically register/deregister IPv6 neighbors with BFD for monitoring the connectivity of the neighbor. Neighbor is registered with BFD when 2-way adjacency is established and deregistered when adjacency goes down if the BFD is enabled on the interface through which the neighbor was discovered.
OSPF6 BFD command added to configure BFD and parameters (detect multiplier, min rx and min tx).
interface <if-name>
ipv6 ospf6 bfd <detect mult> <min rx> <min tx>
Signed-off-by: Radhika Mahankali <radhika@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Kanna Rajagopal <kanna@cumulusnetworks.com>
|
