| Age | Commit message (Collapse) | Author |
|---|
|
Trying to delete an interface during the test test_eigrp_topo1.py triggers a crash.
```
EIGRP: abort+0x12b
EIGRP: _zlog_assert_failed+0x18c
EIGRP: mt_count_free+0x56
EIGRP: qfree+0x2e
EIGRP: eigrp_if_delete_hook+0x8c
EIGRP: hook_call_if_del+0x5f
EIGRP: if_delete_retain+0x1c
EIGRP: if_delete+0xfb
EIGRP: if_destroy_via_zapi+0x69
EIGRP: zclient_interface_delete+0x57
EIGRP: zclient_read+0x3d0
EIGRP: event_call+0xd8
EIGRP: frr_run+0x271
EIGRP: main+0x14b
EIGRP: __libc_start_main+0xf3
EIGRP: _start+0x2e
EIGRP: in thread zclient_read scheduled from lib/zclient.c:4514 zclient_event()
```
Signed-off-by: Volodymyr Huti <v.huti@vyos.io>
(cherry picked from commit 8ddf6a713f2003ccccb884a8c436ffeb2fe34c62)
|
|
Include an event ptr-to-ptr in the event_execute() api
call, like the various schedule api calls. This allows the
execute() api to cancel an existing scheduled task if that
task is being executed inline.
Signed-off-by: Mark Stapp <mjs@labn.net>
|
|
When running all daemons with config for most of them, FRR has
sharpd@janelle:~/frr$ vtysh -c "show debug hashtable" | grep "VRF BIT HASH" | wc -l
3570
3570 hashes for bitmaps associated with the vrf. This is a very
large number of hashes. Let's do two things:
a) Reduce the created size of the actually created hashes to 2
instead of 32.
b) Delay generation of the hash *until* a set operation happens.
As that no hash directly implies a unset value if/when checked.
This reduces the number of hashes to 61 in my setup for normal
operation.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
All paths of the loop set dest_addr at the start
of the loop. No need to set it to NULL to immediately
set it too something else.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
We should probably prevent any type of namespace collision
with something else.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
Let's find a better name for it.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
Convert the `struct thread_master` to `struct event_master`
across the code base.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
Modify the code base so that thread_cancel becomes event_cancel
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
Effectively a massive search and replace of
`struct thread` to `struct event`. Using the
term `thread` gives people the thought that
this event system is a pthread when it is not
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
This is a first in a series of commits, whose goal is to rename
the thread system in FRR to an event system. There is a continual
problem where people are confusing `struct thread` with a true
pthread. In reality, our entire thread.c is an event system.
In this commit rename the thread.[ch] files to event.[ch].
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
Done with a combination of regex'ing and banging my head against a wall.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Don't directly use `time()` for generating sequence numbers for two
reasons:
1. `time()` can go backwards (due to NTP or time adjustments)
2. Coverity Scan warns every time we truncate a `time_t` variable for
good reason (verify that we are Y2K38 ready).
Found by Coverity Scan (CID 1519812, 1519786, 1519783 and 1519772)
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
|
|
Rather than running selected source files through the preprocessor and a
bunch of perl regex'ing to get the list of all DEFUNs, use the data
collected in frr.xref.
This not only eliminates issues we've been having with preprocessor
failures due to nonexistent header files, but is also much faster.
Where extract.pl would take 5s, this now finishes in 0.2s. And since
this is a non-parallelizable build step towards the end of the build
(dependent on a lot of other things being done already), the speedup is
actually noticeable.
Also files containing CLI no longer need to be listed in `vtysh_scan`
since the .xref data covers everything. `#ifndef VTYSH_EXTRACT_PL`
checks are equally obsolete.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
There are lib debugs being set but never show up in
`show debug` commands because there was no way to show
that they were being used. Add a bit of infrastructure
to allow this and then use it for `debug route-map`
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
these changes are for improving the code maintainability
Signed-off-by: sri-mohan1 <sri.mohan@samsung.com>
|
|
vrf is a char * being passed in. Rename the vrf to be something
else.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
Wrong: memset(&a, 0, sizeof(struct ...));
Good: memset(&a, 0, sizeof(a));
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
|
|
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
The int return value is never used. Modify the code
base to just return a void instead.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
Intentionally up convert uint8_t and uint32_t values
to a uint64_t before doing math to make Coverity happy.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
Currently, it is possible to rename the default VRF either by passing
`-o` option to zebra or by creating a file in `/var/run/netns` and
binding it to `/proc/self/ns/net`.
In both cases, only zebra knows about the rename and other daemons learn
about it only after they connect to zebra. This is a problem, because
daemons may read their config before they connect to zebra. To handle
this rename after the config is read, we have some special code in every
single daemon, which is not very bad but not desirable in my opinion.
But things are getting worse when we need to handle this in northbound
layer as we have to manually rewrite the config nodes. This approach is
already hacky, but still works as every daemon handles its own NB
structures. But it is completely incompatible with the central
management daemon architecture we are aiming for, as mgmtd doesn't even
have a connection with zebra to learn from it. And it shouldn't have it,
because operational state changes should never affect configuration.
To solve the problem and simplify the code, I propose to expand the `-o`
option to all daemons. By using the startup option, we let daemons know
about the rename before they read their configs so we don't need any
special code to deal with it. There's an easy way to pass the option to
all daemons by using `frr_global_options` variable.
Unfortunately, the second way of renaming by creating a file in
`/var/run/netns` is incompatible with the new mgmtd architecture.
Theoretically, we could force daemons to read their configs only after
they connect to zebra, but it means adding even more code to handle a
very specific use-case. And anyway this won't work for mgmtd as it
doesn't have a connection with zebra. So I had to remove this option.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
|
|
Since f60a1188 we store a pointer to the VRF in the interface structure.
There's no need anymore to store a separate vrf_id field.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
|
|
build: assorted build system improvements, 2021-11 edition
|
|
Naming functions/data structures more appropriately for
the project we are actually in.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
These really serve no purpose other than slowing our build down. If
there's a benefit to any of these, they can be readded.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
|
|
```
exit1-debian-9(config-route-map)# match ip route-source prefix-list ?
<cr>
PREFIXLIST_NAME IP prefix-list name
p1 p2
```
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
|
|
*: fix interface config write in NB-converted daemons
|
|
*: convert zclient callbacks to table
|
|
When writing the config from the NB-converted daemon, we must not rely
on the operational data. This commit changes the output of the interface
configuration to use only config data. As the code is the same for all
daemons, move it to the lib and remove all the duplicated code.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
|
|
lib: northbound cli show/cmd functions must not modify data nodes
|
|
This removes a giant `switch { }` block from lib/zclient.c and
harmonizes all zclient callback function types to be the same (some had
a subset of the args, some had a void return, now they all have
ZAPI_CALLBACK_ARGS and int return.)
Apart from getting rid of the giant switch, this is a minor security
benefit since the function pointers are now in a `const` array, so they
can't be overwritten by e.g. heap overflows for code execution anymore.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
To ensure this, add a const modifier to functions' arguments. Would be
great do this initially and avoid this large code change, but better
late than never.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
|
|
*: cleanup number-named access-lists in CLI
|
|
There's no more difference between number-named and word-named access-lists.
This commit removes separate arguments for number-named ACLs from CLI.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
|
|
1) Do not explicitly set the thread pointer to NULL.
FRR should only ever use the appropriate THREAD_ON/THREAD_OFF
semantics. This is espacially true for the functions we
end up calling the thread for.
2) Fix mixup of `struct eigrp_interface` and `struct eigrp`
usage of the same thread pointer.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
vrf_name_to_id() returned VRF_DEFAULT when the vrf name was
unknown, hiding errors. Per community recommendation, vrf_name_to_id()
is now removed and the few callers now use vrf_lookup_by_name()
directly.
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
|
|
lib: remove unused argument from vrf_cmd_init
|
|
*: explicitly print "exit" at the end of every node config
|
|
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
|
|
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
|
|
There is a possibility that the same line can be matched as a command in
some node and its parent node. In this case, when reading the config,
this line is always executed as a command of the child node.
For example, with the following config:
```
router ospf
network 193.168.0.0/16 area 0
!
mpls ldp
discovery hello interval 111
!
```
Line `mpls ldp` is processed as command `mpls ldp-sync` inside the
`router ospf` node. This leads to a complete loss of `mpls ldp` node
configuration.
To eliminate this issue and all possible similar issues, let's print an
explicit "exit" at the end of every node config.
This commit also changes indentation for a couple of existing exit
commands so that all existing commands are on the same level as their
corresponding node-entering commands.
Fixes #9206.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
|
|
The only difference in daemons' interface node definition is the config
write function. No need to define the node in every daemon, just pass
the callback as an argument to a library function and define the node
there.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
|
|
There are a few places in the code where we use PREFIX_COPY(_IPV4/IPV6)
macro to copy a prefix. Let's always use prefix_copy function for this.
This should fix CID 1482142 and 1504610.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
|
|
If we have the following configuration:
```
vrf red
smth
exit-vrf
!
interface red vrf red
smth
```
And we delete the VRF using "no vrf red" command, we end up with:
```
interface red
smth
```
Interface config is preserved but moved to the default VRF.
This is not an expected behavior. We should remove the interface config
when the VRF is deleted.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
|
|
The backoff code assumed that yang operations always completed quickly.
It checked for > 100 YANG modeled commands happening in under 1 second
to enable batching. If 100 yang modeled commands always take longer than
1 second batching is never enabled. This is the exact opposite of what
we want to happen since batching speeds the operations up.
Here are the results for libyang2 code without and with batching.
| action | 1K rts | 2K rts | 1K rts | 2K rts | 20k rts |
| | nobatch | nobatch | batch | batch | batch |
| Add IPv4 | .881 | 1.28 | .703 | 1.04 | 8.16 |
| Add Same IPv4 | 28.7 | 113 | .590 | .860 | 6.09 |
| Rem 1/2 IPv4 | .376 | .442 | .379 | .435 | 1.44 |
| Add Same IPv4 | 28.7 | 113 | .576 | .841 | 6.02 |
| Rem All IPv4 | 17.4 | 71.8 | .559 | .813 | 5.57 |
(IPv6 numbers are basically the same as iPv4, a couple percent slower)
Clearly we need this. Please note the growth (1K to 2K) w/o batching is
non-linear and 100 times slower than batched.
Notes on code: The use of the new `nb_cli_apply_changes_clear_pending`
is to commit any pending changes (including the current one). This is
done when the code would not correctly handle a single diff that
included the current changes with possible following changes. For
example, a "no" command followed by a new value to replace it would be
merged into a change, and the code would not deal well with that. A good
example of this is BGP neighbor peer-group changing. The other use is
after entering a router level (e.g., "router bgp") where the follow-on
command handlers expect that router object to now exists. The code
eventually needs to be cleaned up to not fail in these cases, but that
is for future NB cleanup.
Signed-off-by: Christian Hopps <chopps@labn.net>
|
