| Age | Commit message (Collapse) | Author |
|---|
|
On receiving side we already did the job correctly, but the peer which initiates
the clear does not retain the other's routes. This commit fixes that.
Fixes: 20170775da3a3c5d41aba714d0c1d5a29b0da61c ("bgpd: Activate Graceful-Restart when receiving CEASE/HOLDTIME notifications")
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
(cherry picked from commit b7c657d4e065f310fcf6454abae1a963c208c3b8)
|
|
Commit: cc9f21da2218d95567eff1501482ce58e6600f54
Modified the bgp_fsm code to dissallow the extension
of the hold time when the system is under extremely
heavy load. This was a attempt to remove the return
code but it was too aggressive and messed up this bit
of code.
Put the behavior back that was introduced in:
d0874d195d0127009a7d9c06920c52c95319eff9
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
(cherry picked from commit 9a26a56c5188fd1c95e244932bc17f97b9051935)
|
|
All assignments of the EVPN attributes (ESI and Gateway IP) are gated
behind the peer being set up for inbound soft-reconfiguration.
There are no actual reasons for this limitation, so let's perform the
EVPN attribute assignment no matter what when soft reconfiguration is
not enabled.
Fixes: 6e076ba5231 ("bgpd: Fix for ain->attr corruption during path update")
Signed-off-by: Tuetuopay <tuetuopay@me.com>
(cherry picked from commit 7320659f78cbe86dd983d5101831120fc14583d7)
|
|
The `route_set_evpn_gateway_ip` function copies `gw_ip->ip.addr` in the
route's gateway ip. In a nutshell, this skips the `ipa_type` field,
writing the actual IP in the IP type. This later rightfully trips
asserts about unknown IP types.
The following route-map...
```
route-map test permit 10
set evpn gateway-ip ipv4 1.1.1.1
```
...will make the following gateway IP in the route:
```
(gdb) p/x a1->evpn_overlay->gw_ip
$11 = {ipa_type = 0x1010101, ip = {addr = 0x0, addrbytes = {
0x0 <repeats 16 times>}, _v4_addr = {s_addr = 0x0}, _v6_addr = {
__in6_u = {__u6_addr8 = {0x0 <repeats 16 times>}, __u6_addr16 = {0x0,
0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, __u6_addr32 = {0x0, 0x0, 0x0,
0x0}}}}}
```
We do indeed see the IP Address in the `ipa_type` field.
Fix by starting the memcpy at the root of `struct ipaddr` instead of
skipping the `ipa_type` field.
Fixes: d0a4ee6010a ("bgpd: Add "set evpn gateway-ip" clause for route-map")
Signed-off-by: Tuetuopay <tuetuopay@me.com>
(cherry picked from commit 0b0e7015971a788c14dd1dc9b5bac8cb66175c29)
|
|
The two memory leaks:
==387155== 744 (48 direct, 696 indirect) bytes in 1 blocks are definitely lost in loss record 222 of 262
==387155== at 0x4848899: malloc (in /usr/libexec/valgrind/vgpreload_memcheck-amd64-linux.so)
==387155== by 0x4C1B982: json_object_new_object (in /usr/lib/x86_64-linux-gnu/libjson-c.so.5.1.0)
==387155== by 0x2E4146: peer_adj_routes (bgp_route.c:15245)
==387155== by 0x2E4F1A: show_ip_bgp_instance_neighbor_advertised_route_magic (bgp_route.c:15549)
==387155== by 0x2B982B: show_ip_bgp_instance_neighbor_advertised_route (bgp_route_clippy.c:722)
==387155== by 0x4915E6F: cmd_execute_command_real (command.c:1003)
==387155== by 0x4915FE8: cmd_execute_command (command.c:1062)
==387155== by 0x4916598: cmd_execute (command.c:1228)
==387155== by 0x49EB858: vty_command (vty.c:626)
==387155== by 0x49ED77C: vty_execute (vty.c:1389)
==387155== by 0x49EFFA7: vtysh_read (vty.c:2408)
==387155== by 0x49E4156: event_call (event.c:2019)
==387155== by 0x4958ABD: frr_run (libfrr.c:1247)
==387155== by 0x206A68: main (bgp_main.c:557)
==387155==
==387155== 2,976 (192 direct, 2,784 indirect) bytes in 4 blocks are definitely lost in loss record 240 of 262
==387155== at 0x4848899: malloc (in /usr/libexec/valgrind/vgpreload_memcheck-amd64-linux.so)
==387155== by 0x4C1B982: json_object_new_object (in /usr/lib/x86_64-linux-gnu/libjson-c.so.5.1.0)
==387155== by 0x2E45CA: peer_adj_routes (bgp_route.c:15325)
==387155== by 0x2E4F1A: show_ip_bgp_instance_neighbor_advertised_route_magic (bgp_route.c:15549)
==387155== by 0x2B982B: show_ip_bgp_instance_neighbor_advertised_route (bgp_route_clippy.c:722)
==387155== by 0x4915E6F: cmd_execute_command_real (command.c:1003)
==387155== by 0x4915FE8: cmd_execute_command (command.c:1062)
==387155== by 0x4916598: cmd_execute (command.c:1228)
==387155== by 0x49EB858: vty_command (vty.c:626)
==387155== by 0x49ED77C: vty_execute (vty.c:1389)
==387155== by 0x49EFFA7: vtysh_read (vty.c:2408)
==387155== by 0x49E4156: event_call (event.c:2019)
==387155== by 0x4958ABD: frr_run (libfrr.c:1247)
==387155== by 0x206A68: main (bgp_main.c:557)
For the 1st one, if the operator issues a advertised-routes command, the
json_ar variable was never being freed.
For the 2nd one, if the operator issued a command where the
output_count_per_rd is 0, we need to free the json_routes value.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
(cherry picked from commit 9651b159ccd18c81450251dbd3bae9c493b7a866)
|
|
BT:
```
3 <signal handler called>
4 0x00005616837546fc in bgp_static_update (bgp=bgp@entry=0x5616865eac50, p=0x561686639e40,
bgp_static=0x561686639f50, afi=afi@entry=AFI_IP6, safi=safi@entry=SAFI_UNICAST) at ../bgpd/bgp_route.c:7232
5 0x0000561683754ad0 in bgp_static_add (bgp=0x5616865eac50) at ../bgpd/bgp_table.h:413
6 0x0000561683785e2e in no_bgp_network_import_check (self=<optimized out>, vty=0x5616865e04c0,
argc=<optimized out>, argv=<optimized out>) at ../bgpd/bgp_vty.c:4609
7 0x00007fdbcc294820 in cmd_execute_command_real (vline=vline@entry=0x561686663000,
```
The program encountered a SEG FAULT when attempting to access pi->extra->vrfleak->bgp_orig because
pi->extra->vrfleak was NULL.
```
(gdb) p pi->extra->vrfleak
$1 = (struct bgp_path_info_extra_vrfleak *) 0x0
(gdb) p pi->extra->vrfleak->bgp_orig
Cannot access memory at address 0x8
```
Added NOT NULL check on pi->extra->vrfleak before accessing pi->extra->vrfleak->bgp_orig
to prevent the segmentation fault.
Signed-off-by: Manpreet Kaur <manpreetk@nvidia.com>
(cherry picked from commit bc1008b970541c090e36fc1d50c720df822fcb99)
|
|
Upon configuration of a VRF instance that references an absent default
VRF with "import vrf default", the default instance is created in hidden
state. However, the default instance is not properly un-hidden when
configured.
Restore the behavior prior to commit below.
Fixes: 9f7177af13 ("bgpd: fix duplicate BGP instance created with unified config")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
(cherry picked from commit 70e07678bfe554dd5be30a605ddf6c0fe3a8a39b)
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
|
|
'import vrf VRF' could define a hidden bgp instance with
the default AS_UNSPECIFIED (i.e. = 1) value.
When a
router bgp AS vrf VRF
gets configured later on, replace this AS_UNSPECIFIED setting
with a requested value.
Fixes: 9680831518 ("bgpd: fix as_pretty mem leaks when un-hiding")
Signed-off-by: Alexander Skorichenko <askorichenko@netgate.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
(cherry picked from commit 1515a59202280933936b41c4cb2cb11c7889b279)
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
|
|
This reverts commit 2ff08af78e315c69795417d150cd23649f68c655.
The fix is obviously wrong.
Link: 2ff08af78e315c69795417d150cd23649f68c655
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
(cherry picked from commit 339206341fa08c57316559eb3733d216236dfe9d)
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
|
|
bgp_process_queue_init() is not called in bgp_create() when leaving the
BGP instance hidden state because of the following goto:
> if (hidden) {
> bgp = bgp_old;
> goto peer_init;
> }
Upon reconfiguration of the default instance, the prefixes are never set
into a meta queue by mq_add_handler(). They are never processed for
zebra RIB installation and announcements of update/withdraw.
Do not delete the BGP process_queue when hiding.
Fixes: 4d0e7a49cf ("bgpd: VRF-Lite fix default bgp delete")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
(cherry picked from commit 71a3756f2dda272e69727fa416bca12c016d9567)
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
|
|
When unconfiguring a default BGP instance with VPN SAFI configurations,
the default BGP structure remains but enters a hidden state. Upon
reconfiguration, the instance name incorrectly appears as "VIEW ?"
instead of "VRF default". And the name_pretty pointer
The name_pretty pointer is replaced by another one with the incorrect
name. This also leads to a memory leak as the previous pointer is not
properly freed.
Do not rewrite the instance name.
Fixes: 4d0e7a49cf ("bgpd: VRF-Lite fix default bgp delete")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
(cherry picked from commit d2ff7e8a2117ad4bc38cec0e48c6b3c11dc49c91)
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
|
|
Revert "bgpd: fix default instance when leaving the hidden state (backport 10.3)" #18162
|
|
This reverts commit 20664936afc7f952a51a19ab26daece5105bbee5.
Signed-off-by: Jafar Al-Gharaibeh <jafar@atcorp.com>
|
|
This reverts commit a2c1956efa399c6770605712d0b53e5f24979acc.
Signed-off-by: Jafar Al-Gharaibeh <jafar@atcorp.com>
|
|
This reverts commit d9d74d33bca0e23a2cd4723fbc4709dc83fd1332.
Signed-off-by: Jafar Al-Gharaibeh <jafar@atcorp.com>
|
|
This reverts commit 8e04277fff9597412198da123250e1951bfc580d.
Signed-off-by: Jafar Al-Gharaibeh <jafar@atcorp.com>
|
|
As part of the upstream master commit (f3575f61c7 bgpd: Sort the
bgp_path_inf) the snippet of the code for dmed check condition
left out, which leads to an issue of selecting incorrect bestpath.
As an example:
During the bestpath selection local route looses to another path due
to dmed condition being hit.
The snippet of the logs:
2025/02/20 03:06:20.131441 BGP: [JW7VP-K1YVV]
[2]:[0]:[48]:[00:92:00:00:00:10](VRF default): Comparing path
27.0.0.7 flags Valid with path Static announcement flags Selected Valid Attr Changed Unsorted
2025/02/20 03:06:20.131445 BGP: [SYTDR-QV6X9] [2]:[0]:[48]:[00:92:00:00:00:10]: path 27.0.0.7 loses to path Static announcement as ES 03:44:38:39:ff:ff:02:00:00:01 is same and local
2025/02/20 03:06:20.131452 BGP: [JW7VP-K1YVV] [2]:[0]:[48]:[00:92:00:00:00:10](VRF default): Comparing path 27.0.0.8 flags Valid with path Static announcement flags Selected Valid Attr Changed Unsorted
2025/02/20 03:06:20.131456 BGP: [SYTDR-QV6X9] [2]:[0]:[48]:[00:92:00:00:00:10]: path 27.0.0.8 loses to path Static announcement as ES 03:44:38:39:ff:ff:02:00:00:01 is same and local
2025/02/20 03:06:20.131458 BGP: [WEWEC-8SE72] [2]:[0]:[48]:[00:92:00:00:00:10](VRF default): path Static announcement is the bestpath from AS 0 <<<< static is best
2025/02/20 03:06:20.131463 BGP: [Z3A78-GM3G5] bgp_best_selection: [2]:[0]:[48]:[00:92:00:00:00:10](VRF default) pi 27.0.0.7 dmed
2025/02/20 03:06:20.131467 BGP: [Z3A78-GM3G5] bgp_best_selection: [2]:[0]:[48]:[00:92:00:00:00:10](VRF default) pi 27.0.0.8 dmed
2025/02/20 03:06:20.131471 BGP: [N6CTF-2RSKS] [2]:[0]:[48]:[00:92:00:00:00:10](VRF default): After path selection, newbest is path 27.0.0.7 oldbest was Static announce
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
(cherry picked from commit 83ad94694bc061e1ff5f43db42cba46320e0df73)
|
|
bgpd: fix default instance when leaving the hidden state (backport 10.3)
|
|
bgpd: Fix crash in bgp_labelpool (backport #18079)
|
|
bgpd: When removing the prefix list drop the pointer (backport #18160)
|
|
evpn route-targets are decoded in ... multiple places; at least
two have a bug where the AS4 form doesn't have its AS decoded.
Signed-off-by: Mark Stapp <mjs@cisco.com>
(cherry picked from commit 9943a08720ccbed87cd6938791066a0de94a92c6)
|
|
We are very very rarely seeing this crash:
0 0x7f36ba48e389 in prefix_list_apply_ext lib/plist.c:789
1 0x55eff3fa4126 in subgroup_announce_check bgpd/bgp_route.c:2334
2 0x55eff3fa858e in subgroup_process_announce_selected bgpd/bgp_route.c:3440
3 0x55eff4016488 in subgroup_announce_table bgpd/bgp_updgrp_adv.c:808
4 0x55eff401664e in subgroup_announce_route bgpd/bgp_updgrp_adv.c:861
5 0x55eff40111df in peer_af_announce_route bgpd/bgp_updgrp.c:2223
6 0x55eff3f884cb in bgp_announce_route_timer_expired bgpd/bgp_route.c:5892
7 0x7f36ba4ec239 in event_call lib/event.c:2019
8 0x7f36ba41a22a in frr_run lib/libfrr.c:1295
9 0x55eff3e668b7 in main bgpd/bgp_main.c:557
10 0x7f36b9e2d249 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
11 0x7f36b9e2d304 in __libc_start_main_impl ../csu/libc-start.c:360
12 0x55eff3e64a30 in _start (/home/ci/cibuild.1407/frr-source/bgpd/.libs/bgpd+0x2fda30)
0x608000037038 is located 24 bytes inside of 88-byte region [0x608000037020,0x608000037078)
freed by thread T0 here:
0 0x7f36ba8b76a8 in __interceptor_free ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:52
1 0x7f36ba439bd7 in qfree lib/memory.c:131
2 0x7f36ba48d3a3 in prefix_list_free lib/plist.c:156
3 0x7f36ba48d3a3 in prefix_list_delete lib/plist.c:247
4 0x7f36ba48fbef in prefix_bgp_orf_remove_all lib/plist.c:1516
5 0x55eff3f679c4 in bgp_route_refresh_receive bgpd/bgp_packet.c:2841
6 0x55eff3f70bab in bgp_process_packet bgpd/bgp_packet.c:4069
7 0x7f36ba4ec239 in event_call lib/event.c:2019
8 0x7f36ba41a22a in frr_run lib/libfrr.c:1295
9 0x55eff3e668b7 in main bgpd/bgp_main.c:557
10 0x7f36b9e2d249 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
previously allocated by thread T0 here:
0 0x7f36ba8b83b7 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:77
1 0x7f36ba4392e4 in qcalloc lib/memory.c:106
2 0x7f36ba48d0de in prefix_list_new lib/plist.c:150
3 0x7f36ba48d0de in prefix_list_insert lib/plist.c:186
4 0x7f36ba48d0de in prefix_list_get lib/plist.c:204
5 0x7f36ba48f9df in prefix_bgp_orf_set lib/plist.c:1479
6 0x55eff3f67ba6 in bgp_route_refresh_receive bgpd/bgp_packet.c:2920
7 0x55eff3f70bab in bgp_process_packet bgpd/bgp_packet.c:4069
8 0x7f36ba4ec239 in event_call lib/event.c:2019
9 0x7f36ba41a22a in frr_run lib/libfrr.c:1295
10 0x55eff3e668b7 in main bgpd/bgp_main.c:557
11 0x7f36b9e2d249 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
Let's just stop trying to save the pointer around in the peer->orf_plist
data structure. There are other design problems but at least lets
stop the crash from possibly happening.
Fixes: #18138
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
(cherry picked from commit 3d43d7b78971520854903c11b6aec23754fdca34)
|
|
'import vrf VRF' could define a hidden bgp instance with
the default AS_UNSPECIFIED (i.e. = 1) value.
When a
router bgp AS vrf VRF
gets configured later on, replace this AS_UNSPECIFIED setting
with a requested value.
Fixes: 9680831518 ("bgpd: fix as_pretty mem leaks when un-hiding")
Signed-off-by: Alexander Skorichenko <askorichenko@netgate.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
|
|
This reverts commit 2ff08af78e315c69795417d150cd23649f68c655.
The fix is obviously wrong.
Link: 2ff08af78e315c69795417d150cd23649f68c655
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
|
|
bgp_process_queue_init() is not called in bgp_create() when leaving the
BGP instance hidden state because of the following goto:
> if (hidden) {
> bgp = bgp_old;
> goto peer_init;
> }
Upon reconfiguration of the default instance, the prefixes are never set
into a meta queue by mq_add_handler(). They are never processed for
zebra RIB installation and announcements of update/withdraw.
Do not delete the BGP process_queue when hiding.
Fixes: 4d0e7a49cf ("bgpd: VRF-Lite fix default bgp delete")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
|
|
When unconfiguring a default BGP instance with VPN SAFI configurations,
the default BGP structure remains but enters a hidden state. Upon
reconfiguration, the instance name incorrectly appears as "VIEW ?"
instead of "VRF default". And the name_pretty pointer
The name_pretty pointer is replaced by another one with the incorrect
name. This also leads to a memory leak as the previous pointer is not
properly freed.
Do not rewrite the instance name.
Fixes: 4d0e7a49cf ("bgpd: VRF-Lite fix default bgp delete")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
|
|
When a BGP instance with a manually assigned VPN label is deleted, the
label is not released from the Zebra label registry. As a result,
reapplying a configuration with the same manual label leads to VPN
prefix export failures.
For example, with the following configuration:
> router bgp 65000 vrf BLUE
> address-family ipv4 unicast
> label vpn export <int>
Release zebra label registry on unconfiguration.
Fixes: d162d5f6f5 ("bgpd: fix hardset l3vpn label available in mpls pool")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
(cherry picked from commit d6363625c35a99933bf60c9cf0b79627b468c9f7)
|
|
The bgp labelpool code is grabbing the vpn policy data structure.
This vpn_policy has a pointer to the bgp data structure. If
a item placed on the bgp label pool workqueue happens to sit
there for the microsecond or so and the operator issues a
`no router bgp...` command that corresponds to the vpn_policy
bgp pointer, when the workqueue is run it will crash because
the bgp pointer is now freed and something else owns it.
Modify the labelpool code to store the vrf id associated
with the request on the workqueue. When you wake up
if the vrf id still has a bgp pointer allow the request
to continue, else drop it.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
(cherry picked from commit 14eac319e8ae9314f5270f871106a70c4986c60c)
|
|
opensourcerouting/fix/backport_82d28f137aed2e60380807a302e2b312408eff6e_10.3
Cid 1636504 (backport)
|
|
In bgp_show_table_rd(), the is_last argument is determined using the
expression "next == NULL" to check if the RD table is the last one. This
helps ensure proper JSON formatting.
However, if next is not NULL but is no longer associated with a BGP
table, the JSON output becomes malformed.
Updates the condition to also verify the existence of the next bgp_dest
table.
Fixes: 1ae44dfcba ("bgpd: unify 'show bgp' with RD with normal unicast bgp show")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
(cherry picked from commit cf0269649cdd09b8d3f2dd8815caf6ecf9cdeef9)
|
|
The following static analysis can be seen :
> *** CID 1636504: (ARRAY_VS_SINGLETON)
> /bgpd/bgp_evpn_mh.c: 1241 in bgp_evpn_type1_route_process()
> 1235 build_evpn_type1_prefix(&p, eth_tag, &esi, vtep_ip);
> 1236 /* Process the route. */
> 1237 if (attr) {
> 1238 bgp_update(peer, (struct prefix *)&p, addpath_id, attr, afi, safi, ZEBRA_ROUTE_BGP,
> 1239 BGP_ROUTE_NORMAL, &prd, &label, num_labels, 0, NULL);
> 1240 } else {
> >>> CID 1636504: (ARRAY_VS_SINGLETON)
> >>> Passing "&label" to function "bgp_withdraw" which uses it as an array. This might corrupt or misinterpret adjacent memory locations.
> 1241 bgp_withdraw(peer, (struct prefix *)&p, addpath_id, afi, safi, ZEBRA_ROUTE_BGP,
> 1242 BGP_ROUTE_NORMAL, &prd, &label, num_labels);
> 1243 }
> 1244 return 0;
> 1245 }
> 1246
> /bgpd/bgp_evpn_mh.c: 1238 in bgp_evpn_type1_route_process()
> 1232 * table
> 1233 */
> 1234 vtep_ip.s_addr = INADDR_ANY;
> 1235 build_evpn_type1_prefix(&p, eth_tag, &esi, vtep_ip);
> 1236 /* Process the route. */
> 1237 if (attr) {
> >>> CID 1636504: (ARRAY_VS_SINGLETON)
> >>> Passing "&label" to function "bgp_update" which uses it as an array. This might corrupt or misinterpret adjacent memory locations.
> 1238 bgp_update(peer, (struct prefix *)&p, addpath_id, attr, afi, safi, ZEBRA_ROUTE_BGP,
> 1239 BGP_ROUTE_NORMAL, &prd, &label, num_labels, 0, NULL);
> 1240 } else {
> 1241 bgp_withdraw(peer, (struct prefix *)&p, addpath_id, afi, safi, ZEBRA_ROUTE_BGP,
> 1242 BGP_ROUTE_NORMAL, &prd, &label, num_labels);
> 1243 }
Fix this by declaring a label array instead of a single array.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
|
|
Remove the num_labels variable, the received bgp_update() and
bgp_withdraw() function will read the message as including one
label or vni value.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
|
|
lib: actually hash all 16 bytes of IPv6 addresses, not just 4 (backport #17901)
|
|
When SRv6 is enabled and an SRv6 locator is specified in the BGP
configuration, BGP may attempt to request SRv6 locator information from
zebra before the connection is fully established. If this occurs, the
request fails with the following error:
```
2025/02/06 16:37:32 BGP: [HR66R-TWQYD][EC 100663302] srv6_manager_get_locator: invalid zclient socket
````
As a result, BGP is unable to obtain the locator information,
preventing SRv6 VPN from working.
This commit fixes the issue by ensuring BGP requests SRv6 locator
information once the connection with zebra is successfully established.
Signed-off-by: Carmine Scarpitta <cscarpit@cisco.com>
(cherry picked from commit 16640b615dfabfd8e18dd091b1d4a63dfa7bf9fe)
|
|
In bgp route leak, when import vrf x is executed,
it creates bgp instance as hidden with asn value as unspecified.
When router bgp x is configured ensure the correct as,
asnotation is applied otherwise running config shows asn value as 0.
This can lead to frr-reload failure when any FRR config change.
Fix:
Move asn and asnotiation, as_pretty value in common done section,
so when bgp_create gets existing instance but before returning
update asn and required fields in common section.
In bgp_create(): when returning for hidden at least update asn
and required when bgp instance created implicitly due to vrf leak.
if (hidden) {
bgp = bgp_old;
goto peer_init; <<<
}
Before fix:
show running:
router bgp 0 vrf purple
bgp router-id 10.10.3.11
!
address-family ipv4 unicast
redistribute static
import vrf blue
exit-address-family
!
address-family ipv6 unicast
import vrf blue
exit-address-family
!
address-family l2vpn evpn
advertise ipv4 unicast
advertise ipv6 unicast
exit-address-family
exit
Testing:
1) following snippet config:
router bgp 63420 vrf blue
import vrf purple
router bgp 63420 vrf purple
import vrf blue
2) restart frr leads to the running config with 0 asn value.
Signed-off-by: Chirag Shah <chirag@nvidia.com>
(cherry picked from commit 2ff08af78e315c69795417d150cd23649f68c655)
|
|
While the loop is currently exited in all cases after using nexthop, it
is a footgun to have "nh" around to be reused in another iteration of
the loop. This would leave nexthop with partial data from the previous
use. Make it local where needed instead.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
(cherry picked from commit ce7f5b21221f0b3557d1f4a40793230d8bc4cf02)
|
|
Grab the count of streams in ibuf when it is protected
by a mutex. Since this data is written to it in another
pthread.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
(cherry picked from commit f94ad538cf93d2b18fa4181e8508f08f94f0a2cc)
|
|
Memory is being leaked when processing the eoiu marker.
BGP is creating a dummy dest to contain the data but
it was never freed. As well as the eoiu info was
not being freed either.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
(cherry picked from commit c6b7a993fb2961e04d069f1779498342aa7932fd)
|
|
If we have IPv6-only network and no IPv4 addresses at all, then by default
0.0.0.0 is created which is treated as malformed according to RFC 6286.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
(cherry picked from commit 739f2b566a8217acce84d4c21aaf033314f535bb)
|
|
bgpd: fix route-distinguisher in vrf leak json cmd
|
|
bgpd: add config default for "bgp bestpath aigp"
|
|
For auto configured value RD value comes as NULL,
switching back to original change will ensure to cover
for both auto and user configured RD value in JSON.
tor-11# show bgp vrf blue ipv4 unicast route-leak json
{
"vrf":"blue",
"afiSafi":"ipv4Unicast",
"importFromVrfs":[
"purple"
],
"importRts":"10.10.3.11:6",
"exportToVrfs":[
"purple"
],
"routeDistinguisher":"(null)", <<<<<
"exportRts":"10.10.3.11:10"
}
Signed-off-by: Chirag Shah <chirag@nvidia.com>
|
|
bgpd: Release SID on router deletion
|
|
Just to make it simpler for compiling with a different default value.
No change to its default value.
Signed-off-by: Enke Chen <enchen@paloaltonetworks.com>
|
|
bgpd: Do not ignore auto generated VRF instances when deleting
|
|
bgpd: add config default for "route-reflector allow-outbound-policy"
|
|
Just to make it simpler for compiling with a different default value.
No change to its default value.
Signed-off-by: Enke Chen <enchen@paloaltonetworks.com>
|
|
When you have suppress-fib-pending turned on it is possible
to end up in a situation where the prefix is not withdrawn
from downstream peers.
Here is the timing that I believe is happening:
a) have 2 paths to a peer.
b) receive a withdrawal from 1 path, set BGP_NODE_FIB_INSTALL_PENDING
and send the route install to zebra.
c) receive a withdrawal from the other path.
d) At this point we have a dest->flags set BGP_NODE_FIB_INSTALL_PENDING
old_select the path_info going away, new_select is NULL
e) A bit further down we call group_announce_route() which calls
the code to see if we should advertise the path. It sees the
BGP_NODE_FIB_INSTALL_PENDING flag and says, nope.
f) the route is sent to zebra to withdraw, which unsets the
BGP_NODE_FIB_INSTALL_PENDING.
g) This function winds up and deletes the path_info. Dest now
has no path infos.
h) BGP receives the route install(from step b) and unsets the
BGP_NODE_FIB_INSTALL_PENDING flag
i) BGP receives the route removed from zebra (from step f) and
unsets the flag again.
We know if there is no new_select, let's go ahead and just
unset the PENDING flag to allow the withdrawal to go out
at the time when the second withdrawal is received.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
|
|
Signed-off-by: Mikhail Sokolovskiy <sokolmish@gmail.com>
|
|
bgpd: fix table-map option
|
