diff options
Diffstat (limited to 'lib/zebra.h')
| -rw-r--r-- | lib/zebra.h | 181 |
1 files changed, 0 insertions, 181 deletions
diff --git a/lib/zebra.h b/lib/zebra.h index 3e1eefdb2e..22239f8e60 100644 --- a/lib/zebra.h +++ b/lib/zebra.h @@ -202,18 +202,12 @@ typedef unsigned char uint8_t; /* Some systems do not define UINT32_MAX, etc.. from inttypes.h * e.g. this makes life easier for FBSD 4.11 users. */ -#ifndef INT8_MAX -#define INT8_MAX (127) -#endif #ifndef INT16_MAX #define INT16_MAX (32767) #endif #ifndef INT32_MAX #define INT32_MAX (2147483647) #endif -#ifndef UINT8_MAX -#define UINT8_MAX (255U) -#endif #ifndef UINT16_MAX #define UINT16_MAX (65535U) #endif @@ -250,13 +244,6 @@ size_t strlcpy(char *__restrict dest, const char *__restrict src, size_t destsize); #endif -/* GCC have printf type attribute check. */ -#ifdef __GNUC__ -#define PRINTF_ATTRIBUTE(a,b) __attribute__ ((__format__ (__printf__, a, b))) -#else -#define PRINTF_ATTRIBUTE(a,b) -#endif /* __GNUC__ */ - /* * RFC 3542 defines several macros for using struct cmsghdr. * Here, we define those that are not present @@ -343,12 +330,6 @@ struct in_pktinfo { /* default zebra TCP port for zclient */ #define ZEBRA_PORT 2600 -/* Marker value used in new Zserv, in the byte location corresponding - * the command value in the old zserv header. To allow old and new - * Zserv headers to be distinguished from each other. - */ -#define ZEBRA_HEADER_MARKER 254 - /* * The compiler.h header is used for anyone using the CPP_NOTICE * since this is universally needed, let's add it to zebra.h @@ -358,65 +339,8 @@ struct in_pktinfo { /* Zebra route's types are defined in route_types.h */ #include "route_types.h" -/* Note: whenever a new route-type or zserv-command is added the - * corresponding {command,route}_types[] table in lib/log.c MUST be - * updated! */ - -/* Map a route type to a string. For example, ZEBRA_ROUTE_RIPNG -> "ripng". */ -extern const char *zebra_route_string(unsigned int route_type); -/* Map a route type to a char. For example, ZEBRA_ROUTE_RIPNG -> 'R'. */ -extern char zebra_route_char(unsigned int route_type); -/* Map a zserv command type to the same string, - * e.g. ZEBRA_INTERFACE_ADD -> "ZEBRA_INTERFACE_ADD" */ -/* Map a protocol name to its number. e.g. ZEBRA_ROUTE_BGP->9*/ -extern int proto_name2num(const char *s); -/* Map redistribute X argument to protocol number. - * unlike proto_name2num, this accepts shorthands and takes - * an AFI value to restrict input */ -extern int proto_redistnum(int afi, const char *s); - -extern const char *zserv_command_string(unsigned int command); - #define strmatch(a,b) (!strcmp((a), (b))) -/* Zebra message flags */ - -/* - * Cause Zebra to consider this routes nexthops recursively - */ -#define ZEBRA_FLAG_ALLOW_RECURSION 0x01 -/* - * This is a route that is read in on startup that was left around - * from a previous run of FRR - */ -#define ZEBRA_FLAG_SELFROUTE 0x02 -/* - * This flag is used to tell Zebra that the BGP route being passed - * down is a IBGP route - */ -#define ZEBRA_FLAG_IBGP 0x04 -/* - * This is a route that has been selected for FIB installation. - * This flag is set in zebra and can be passed up to routing daemons - */ -#define ZEBRA_FLAG_SELECTED 0x08 -/* - * This is a route that we are telling Zebra that this route *must* - * win and will be installed even over ZEBRA_FLAG_SELECTED - */ -#define ZEBRA_FLAG_FIB_OVERRIDE 0x10 -/* - * This flag tells Zebra that the route is a EVPN route and should - * be treated specially - */ -#define ZEBRA_FLAG_EVPN_ROUTE 0x20 -/* - * This flag tells Zebra that it should treat the distance passed - * down as an additional discriminator for route selection of the - * route entry. This mainly is used for backup static routes. - */ -#define ZEBRA_FLAG_RR_USE_DISTANCE 0x40 - #ifndef INADDR_LOOPBACK #define INADDR_LOOPBACK 0x7f000001 /* Internet address 127.0.0.1. */ #endif @@ -442,35 +366,6 @@ typedef enum { SAFI_MAX = 8 } safi_t; -/* - * The above AFI and SAFI definitions are for internal use. The protocol - * definitions (IANA values) as for example used in BGP protocol packets - * are defined below and these will get mapped to/from the internal values - * in the appropriate places. - * The rationale is that the protocol (IANA) values may be sparse and are - * not optimal for use in data-structure sizing. - * Note: Only useful (i.e., supported) values are defined below. - */ -typedef enum { - IANA_AFI_RESERVED = 0, - IANA_AFI_IPV4 = 1, - IANA_AFI_IPV6 = 2, - IANA_AFI_L2VPN = 25, - IANA_AFI_IPMR = 128, - IANA_AFI_IP6MR = 129 -} iana_afi_t; - -typedef enum { - IANA_SAFI_RESERVED = 0, - IANA_SAFI_UNICAST = 1, - IANA_SAFI_MULTICAST = 2, - IANA_SAFI_LABELED_UNICAST = 4, - IANA_SAFI_ENCAP = 7, - IANA_SAFI_EVPN = 70, - IANA_SAFI_MPLS_VPN = 128, - IANA_SAFI_FLOWSPEC = 133 -} iana_safi_t; - /* Default Administrative Distance of each protocol. */ #define ZEBRA_KERNEL_DISTANCE_DEFAULT 0 #define ZEBRA_CONNECT_DISTANCE_DEFAULT 0 @@ -501,10 +396,6 @@ typedef enum { #define RESET_FLAG_ATOMIC(PV) \ ((atomic_store_explicit(PV, 0, memory_order_seq_cst))) -/* Zebra types. Used in Zserv message header. */ -typedef uint16_t zebra_size_t; -typedef uint16_t zebra_command_t; - /* VRF ID type. */ typedef uint32_t vrf_id_t; @@ -512,76 +403,4 @@ typedef uint32_t route_tag_t; #define ROUTE_TAG_MAX UINT32_MAX #define ROUTE_TAG_PRI PRIu32 -static inline afi_t afi_iana2int(iana_afi_t afi) -{ - switch (afi) { - case IANA_AFI_IPV4: - return AFI_IP; - case IANA_AFI_IPV6: - return AFI_IP6; - case IANA_AFI_L2VPN: - return AFI_L2VPN; - default: - return AFI_MAX; - } -} - -static inline iana_afi_t afi_int2iana(afi_t afi) -{ - switch (afi) { - case AFI_IP: - return IANA_AFI_IPV4; - case AFI_IP6: - return IANA_AFI_IPV6; - case AFI_L2VPN: - return IANA_AFI_L2VPN; - default: - return IANA_AFI_RESERVED; - } -} - -static inline safi_t safi_iana2int(iana_safi_t safi) -{ - switch (safi) { - case IANA_SAFI_UNICAST: - return SAFI_UNICAST; - case IANA_SAFI_MULTICAST: - return SAFI_MULTICAST; - case IANA_SAFI_MPLS_VPN: - return SAFI_MPLS_VPN; - case IANA_SAFI_ENCAP: - return SAFI_ENCAP; - case IANA_SAFI_EVPN: - return SAFI_EVPN; - case IANA_SAFI_LABELED_UNICAST: - return SAFI_LABELED_UNICAST; - case IANA_SAFI_FLOWSPEC: - return SAFI_FLOWSPEC; - default: - return SAFI_MAX; - } -} - -static inline iana_safi_t safi_int2iana(safi_t safi) -{ - switch (safi) { - case SAFI_UNICAST: - return IANA_SAFI_UNICAST; - case SAFI_MULTICAST: - return IANA_SAFI_MULTICAST; - case SAFI_MPLS_VPN: - return IANA_SAFI_MPLS_VPN; - case SAFI_ENCAP: - return IANA_SAFI_ENCAP; - case SAFI_EVPN: - return IANA_SAFI_EVPN; - case SAFI_LABELED_UNICAST: - return IANA_SAFI_LABELED_UNICAST; - case SAFI_FLOWSPEC: - return IANA_SAFI_FLOWSPEC; - default: - return IANA_SAFI_RESERVED; - } -} - #endif /* _ZEBRA_H */ |