1 files changed, 0 insertions, 109 deletions
diff --git a/doc/developer/building-frr-on-freebsd11.rst b/doc/developer/building-frr-on-freebsd11.rst
deleted file mode 100644
index 87fb30226d..0000000000
--- a/doc/developer/building-frr-on-freebsd11.rst
+++ /dev/null
@@ -1,109 +0,0 @@
-FreeBSD 11
-==========================================
-
-FreeBSD 11 restrictions:
-------------------------
-
--  MPLS is not supported on ``FreeBSD``. MPLS requires a Linux Kernel
-   (4.5 or higher). LDP can be built, but may have limited use without
-   MPLS
-
-Install required packages
--------------------------
-
-Add packages: (Allow the install of the package managment tool if this
-is first package install and asked)
-
-::
-
-    pkg install git autoconf automake libtool gmake gawk json-c pkgconf \
-        bison flex py27-pytest c-ares python3 py-sphinx
-
-Make sure there is no /usr/bin/flex preinstalled (and use the newly
-installed in /usr/local/bin): (FreeBSD frequently provides a older flex
-as part of the base OS which takes preference in path)
-
-::
-
-    rm -f /usr/bin/flex
-
-Get FRR, compile it and install it (from Git)
----------------------------------------------
-
-**This assumes you want to build and install FRR from source and not
-using any packages**
-
-Add frr group and user
-^^^^^^^^^^^^^^^^^^^^^^
-
-::
-
-    pw groupadd frr -g 101
-    pw groupadd frrvty -g 102
-    pw adduser frr -g 101 -u 101 -G 102 -c "FRR suite" \
-        -d /usr/local/etc/frr -s /usr/sbin/nologin
-
-(You may prefer different options on configure statement. These are just
-an example)
-
-::
-
-    git clone https://github.com/frrouting/frr.git frr
-    cd frr
-    ./bootstrap.sh
-    export MAKE=gmake
-    export LDFLAGS="-L/usr/local/lib"
-    export CPPFLAGS="-I/usr/local/include"
-    ./configure \
-        --sysconfdir=/usr/local/etc/frr \
-        --enable-pkgsrcrcdir=/usr/pkg/share/examples/rc.d \
-        --localstatedir=/var/run/frr \
-        --prefix=/usr/local \
-        --enable-ospfclient=yes \
-        --enable-ospfapi=yes \
-        --enable-multipath=64 \
-        --enable-user=frr \
-        --enable-group=frr \
-        --enable-vty-group=frrvty \
-        --enable-configfile-mask=0640 \
-        --enable-logfile-mask=0640 \
-        --enable-rtadv \
-        --enable-fpm \
-        --with-pkg-git-version \
-        --with-pkg-extra-version=-MyOwnFRRVersion
-    gmake
-    gmake check
-    sudo gmake install
-
-Create empty FRR configuration files
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-::
-
-    sudo mkdir /usr/local/etc/frr
-    sudo touch /usr/local/etc/frr/zebra.conf
-    sudo touch /usr/local/etc/frr/bgpd.conf
-    sudo touch /usr/local/etc/frr/ospfd.conf
-    sudo touch /usr/local/etc/frr/ospf6d.conf
-    sudo touch /usr/local/etc/frr/isisd.conf
-    sudo touch /usr/local/etc/frr/ripd.conf
-    sudo touch /usr/local/etc/frr/ripngd.conf
-    sudo touch /usr/local/etc/frr/pimd.conf
-    sudo chown -R frr:frr /usr/local/etc/frr
-    sudo touch /usr/local/etc/frr/vtysh.conf
-    sudo chown frr:frrvty /usr/local/etc/frr/vtysh.conf
-    sudo chmod 640 /usr/local/etc/frr/*.conf
-
-Enable IP & IPv6 forwarding
-^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-Add the following lines to the end of ``/etc/sysctl.conf``:
-
-::
-
-    # Routing: We need to forward packets
-    net.inet.ip.forwarding=1
-    net.inet6.ip6.forwarding=1
-
-**Reboot** or use ``sysctl`` to apply the same config to the running
-system