1 files changed, 143 insertions, 0 deletions
diff --git a/doc/developer/building-frr-for-ubuntu1404.rst b/doc/developer/building-frr-for-ubuntu1404.rst
new file mode 100644
index 0000000000..681cc30a3b
--- /dev/null
+++ b/doc/developer/building-frr-for-ubuntu1404.rst
@@ -0,0 +1,143 @@
+Ubuntu 14.04LTS
+===============================================
+
+-  MPLS is not supported on ``Ubuntu 14.04`` with default kernel. MPLS
+   requires Linux Kernel 4.5 or higher (LDP can be built, but may have
+   limited use without MPLS) For an updated Ubuntu Kernel, see
+   http://kernel.ubuntu.com/~kernel-ppa/mainline/
+
+Install required packages
+-------------------------
+
+Add packages:
+
+::
+
+    apt-get install \
+       git autoconf automake libtool make gawk libreadline-dev texinfo dejagnu \
+       pkg-config libpam0g-dev libjson-c-dev bison flex python-pytest \
+       libc-ares-dev python3-dev python3-sphinx install-info
+
+Get FRR, compile it and install it (from Git)
+---------------------------------------------
+
+**This assumes you want to build and install FRR from source and not
+using any packages**
+
+Add frr groups and user
+^^^^^^^^^^^^^^^^^^^^^^^
+
+::
+
+    sudo groupadd -r -g 92 frr
+    sudo groupadd -r -g 85 frrvty
+    sudo adduser --system --ingroup frr --home /var/run/frr/ \
+       --gecos "FRR suite" --shell /sbin/nologin frr
+    sudo usermod -a -G frrvty frr
+
+Download Source, configure and compile it
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+(You may prefer different options on configure statement. These are just
+an example.)
+
+::
+
+    git clone https://github.com/frrouting/frr.git frr
+    cd frr
+    ./bootstrap.sh
+    ./configure \
+        --prefix=/usr \
+        --enable-exampledir=/usr/share/doc/frr/examples/ \
+        --localstatedir=/var/run/frr \
+        --sbindir=/usr/lib/frr \
+        --sysconfdir=/etc/frr \
+        --enable-pimd \
+        --enable-watchfrr \
+        --enable-ospfclient=yes \
+        --enable-ospfapi=yes \
+        --enable-multipath=64 \
+        --enable-user=frr \
+        --enable-group=frr \
+        --enable-vty-group=frrvty \
+        --enable-configfile-mask=0640 \
+        --enable-logfile-mask=0640 \
+        --enable-rtadv \
+        --enable-fpm \
+        --enable-ldpd \
+        --with-pkg-git-version \
+        --with-pkg-extra-version=-MyOwnFRRVersion
+    make
+    make check
+    sudo make install
+
+Create empty FRR configuration files
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+::
+
+    sudo install -m 755 -o frr -g frr -d /var/log/frr
+    sudo install -m 775 -o frr -g frrvty -d /etc/frr
+    sudo install -m 640 -o frr -g frr /dev/null /etc/frr/zebra.conf
+    sudo install -m 640 -o frr -g frr /dev/null /etc/frr/bgpd.conf
+    sudo install -m 640 -o frr -g frr /dev/null /etc/frr/ospfd.conf
+    sudo install -m 640 -o frr -g frr /dev/null /etc/frr/ospf6d.conf
+    sudo install -m 640 -o frr -g frr /dev/null /etc/frr/isisd.conf
+    sudo install -m 640 -o frr -g frr /dev/null /etc/frr/ripd.conf
+    sudo install -m 640 -o frr -g frr /dev/null /etc/frr/ripngd.conf
+    sudo install -m 640 -o frr -g frr /dev/null /etc/frr/pimd.conf
+    sudo install -m 640 -o frr -g frr /dev/null /etc/frr/ldpd.conf
+    sudo install -m 640 -o frr -g frr /dev/null /etc/frr/nhrpd.conf
+    sudo install -m 640 -o frr -g frrvty /dev/null /etc/frr/vtysh.conf
+
+Enable IP & IPv6 forwarding
+^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Edit ``/etc/sysctl.conf`` and uncomment the following values (ignore the
+other settings)
+
+::
+
+    # Uncomment the next line to enable packet forwarding for IPv4
+    net.ipv4.ip_forward=1
+
+    # Uncomment the next line to enable packet forwarding for IPv6
+    #  Enabling this option disables Stateless Address Autoconfiguration
+    #  based on Router Advertisements for this host
+    net.ipv6.conf.all.forwarding=1
+
+**Reboot** or use ``sysctl -p`` to apply the same config to the running
+system
+
+Install the init.d service
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+::
+
+    sudo install -m 755 tools/frr /etc/init.d/frr
+    sudo install -m 644 tools/etc/frr/daemons /etc/frr/daemons
+    sudo install -m 644 tools/etc/frr/daemons.conf /etc/frr/daemons.conf
+    sudo install -m 644 -o frr -g frr tools/etc/frr/vtysh.conf /etc/frr/vtysh.conf
+
+Enable daemons
+^^^^^^^^^^^^^^
+
+| Edit ``/etc/frr/daemons`` and change the value from "no" to "yes" for
+  those daemons you want to start by systemd.
+| For example.
+
+::
+
+    zebra=yes
+    bgpd=yes
+    ospfd=yes
+    ospf6d=yes
+    ripd=yes
+    ripngd=yes
+    isisd=yes
+
+Start the init.d service
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+-  /etc/init.d/frr start
+-  use ``/etc/init.d/frr status`` to check its status.