zebra: Remove unused testzebra and ancillary files

The testzebra command was unused as well as unmaintained.
The NS and VRF changes never made into testzebra so when
you actually ran testzebra it would just crash due to
uninitialized assumptions.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

1 files changed, 0 insertions, 339 deletions

diff --git a/zebra/test_main.c b/zebra/test_main.c
deleted file mode 100644
index 83c1ebb178..0000000000
--- a/zebra/test_main.c
+++ /dev/null
@@ -1,339 +0,0 @@
-/* main routine.
- * Copyright (C) 1997, 98 Kunihiro Ishiguro
- *
- * GNU Zebra is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * GNU Zebra is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; see the file COPYING; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <zebra.h>
-
-#include <lib/version.h>
-#include "getopt.h"
-#include "command.h"
-#include "thread.h"
-#include "filter.h"
-#include "memory.h"
-#include "zebra_memory.h"
-#include "memory_vty.h"
-#include "prefix.h"
-#include "log.h"
-#include "privs.h"
-#include "sigevent.h"
-#include "vrf.h"
-
-#include "zebra/rib.h"
-#include "zebra/zebra_ns.h"
-#include "zebra/zserv.h"
-#include "zebra/zebra_vrf.h"
-#include "zebra/debug.h"
-#include "zebra/router-id.h"
-#include "zebra/interface.h"
-
-/* Zebra instance */
-struct zebra_t zebrad =
-{
-  .rtm_table_default = 0,
-};
-
-/* process id. */
-pid_t pid;
-
-/* Allow non-quagga entities to delete quagga routes */
-int allow_delete = 0;
-
-/* zebra_rib's workqueue hold time. Private export for use by test code only */
-extern int rib_process_hold_time;
-
-/* Pacify zclient.o in libfrr, which expects this variable. */
-struct thread_master *master;
-
-/* Command line options. */
-struct option longopts[] = 
-{
-  { "batch",        no_argument,       NULL, 'b'},
-  { "daemon",       no_argument,       NULL, 'd'},
-  { "allow_delete", no_argument,       NULL, 'a'},
-  { "config_file",  required_argument, NULL, 'f'},
-  { "help",         no_argument,       NULL, 'h'},
-  { "vty_addr",     required_argument, NULL, 'A'},
-  { "vty_port",     required_argument, NULL, 'P'},
-  { "version",      no_argument,       NULL, 'v'},
-  { "rib_hold",     required_argument, NULL, 'r'},
-  { 0 }
-};
-
-zebra_capabilities_t _caps_p [] = 
-{
-  ZCAP_NET_ADMIN,
-  ZCAP_SYS_ADMIN,
-  ZCAP_NET_RAW,
-};
-
-/* Default configuration file path. */
-char config_default[] = SYSCONFDIR DEFAULT_CONFIG_FILE;
-
-/* Process ID saved for use by init system */
-const char *pid_file = "testzebra.pid";
-
-/* Help information display. */
-static void
-usage (char *progname, int status)
-{
-  if (status != 0)
-    fprintf (stderr, "Try `%s --help' for more information.\n", progname);
-  else
-    {    
-      printf ("Usage : %s [OPTION...]\n\n"\
-	      "Daemon which manages kernel routing table management and "\
-	      "redistribution between different routing protocols.\n\n"\
-	      "-b, --batch        Runs in batch mode\n"\
-	      "-d, --daemon       Runs in daemon mode\n"\
-	      "-a, --allow_delete Allow other processes to delete zebra routes\n" \
-	      "-f, --config_file  Set configuration file name\n"\
-	      "-A, --vty_addr     Set vty's bind address\n"\
-	      "-P, --vty_port     Set vty's port number\n"\
-	      "-r, --rib_hold	  Set rib-queue hold time\n"\
-              "-v, --version      Print program version\n"\
-	      "-h, --help         Display this help and exit\n"\
-	      "\n"\
-	      "Report bugs to %s\n", progname, FRR_BUG_ADDRESS);
-    }
-
-  exit (status);
-}
-
-static ifindex_t test_ifindex = 0;
-
-/* testrib commands */
-DEFUN (test_interface_state,
-       test_interface_state_cmd,
-       "state <up|down>",
-       "configure interface\n"
-       "up\n"
-       "down\n")
-{
-  int idx_up_down = 1;
-  VTY_DECLVAR_CONTEXT (interface, ifp);
-  
-  if (ifp->ifindex == IFINDEX_INTERNAL)
-    {
-      ifp->ifindex = ++test_ifindex;
-      ifp->mtu = 1500;
-      ifp->flags = IFF_BROADCAST|IFF_MULTICAST;
-    }
-  
-  switch (argv[idx_up_down]->arg[0])
-    {
-      case 'u':
-        SET_FLAG (ifp->flags, IFF_UP);
-        if_add_update (ifp);
-        printf ("up\n");
-        break;
-      case 'd':
-        UNSET_FLAG (ifp->flags, IFF_UP);
-        if_delete_update (ifp);
-        printf ("down\n");
-        break;
-      default:
-        return CMD_WARNING;
-    }
-  return CMD_SUCCESS;
-}
-
-static void
-test_cmd_init (void)
-{
-  install_element (INTERFACE_NODE, &test_interface_state_cmd);
-}
-
-/* SIGHUP handler. */
-static void 
-sighup (void)
-{
-  zlog_info ("SIGHUP received");
-
-  /* Reload of config file. */
-  ;
-}
-
-/* SIGINT handler. */
-static void
-sigint (void)
-{
-  zlog_notice ("Terminating on signal");
-
-  exit (0);
-}
-
-/* SIGUSR1 handler. */
-static void
-sigusr1 (void)
-{
-  zlog_rotate();
-}
-
-struct quagga_signal_t zebra_signals[] =
-{
-  { 
-    .signal = SIGHUP, 
-    .handler = &sighup,
-  },
-  {
-    .signal = SIGUSR1,
-    .handler = &sigusr1,
-  },
-  {
-    .signal = SIGINT,
-    .handler = &sigint,
-  },
-  {
-    .signal = SIGTERM,
-    .handler = &sigint,
-  },
-};
-/* Main startup routine. */
-int
-main (int argc, char **argv)
-{
-  char *p;
-  char *vty_addr = NULL;
-  int vty_port = 0;
-  int batch_mode = 0;
-  int daemon_mode = 0;
-  char *config_file = NULL;
-  char *progname;
-  struct thread thread;
-
-  /* Set umask before anything for security */
-  umask (0027);
-
-  /* preserve my name */
-  progname = ((p = strrchr (argv[0], '/')) ? ++p : argv[0]);
-
-  openzlog(progname, "ZEBRA", 0, LOG_CONS | LOG_NDELAY | LOG_PID, LOG_DAEMON);
-
-  while (1) 
-    {
-      int opt;
-  
-      opt = getopt_long (argc, argv, "bdaf:hA:P:r:v", longopts, 0);
-
-      if (opt == EOF)
-	break;
-
-      switch (opt) 
-	{
-	case 0:
-	  break;
-	case 'b':
-	  batch_mode = 1;
-	case 'd':
-	  daemon_mode = 1;
-	  break;
-	case 'a':
-	  allow_delete =1;
-	  break;
-	case 'f':
-	  config_file = optarg;
-	  break;
-	case 'A':
-	  vty_addr = optarg;
-	  break;
-	case 'P':
-	  /* Deal with atoi() returning 0 on failure, and zebra not
-	     listening on zebra port... */
-	  if (strcmp(optarg, "0") == 0) 
-	    {
-	      vty_port = 0;
-	      break;
-	    } 
-	  vty_port = atoi (optarg);
-	  break;
-	case 'r':
-	  rib_process_hold_time = atoi(optarg);
-	  break;
-	case 'v':
-	  print_version (progname);
-	  exit (0);
-	  break;
-	case 'h':
-	  usage (progname, 0);
-	  break;
-	default:
-	  usage (progname, 1);
-	  break;
-	}
-    }
-  
-  /* port and conf file mandatory */
-  if (!vty_port || !config_file)
-    {
-      fprintf (stderr, "Error: --vty_port and --config_file arguments"
-                       " are both required\n");
-      usage (progname, 1);
-    }
-  
-  /* Make master thread emulator. */
-  zebrad.master = thread_master_create ();
-
-  /* Vty related initialize. */
-  signal_init (zebrad.master, array_size(zebra_signals), zebra_signals);
-  cmd_init (1);
-  vty_config_lockless ();
-  vty_init (zebrad.master);
-  memory_init ();
-  zebra_debug_init ();
-  zebra_if_init ();
-  test_cmd_init ();
-
-  /* Zebra related initialize. */
-  rib_init ();
-  access_list_init ();
-
-  /* Make kernel routing socket. */
-  zebra_vrf_init ();
-  zebra_vty_init();
-
-  /* Configuration file read*/
-  vty_read_config (config_file, config_default);
-
-  /* Clean up rib. */
-  rib_weed_tables ();
-
-  /* Exit when zebra is working in batch mode. */
-  if (batch_mode)
-    exit (0);
-
-  /* Daemonize. */
-  if (daemon_mode && daemon (0, 0) < 0)
-    {
-      perror("daemon start failed");
-      exit (1);
-    }
-
-  /* Needed for BSD routing socket. */
-  pid = getpid ();
-
-  /* Make vty server socket. */
-  vty_serv_sock (vty_addr, vty_port, "/tmp/test_zebra");
-
-  /* Print banner. */
-  zlog_notice ("Zebra %s starting: vty@%d", FRR_VERSION, vty_port);
-
-  while (thread_fetch (zebrad.master, &thread))
-    thread_call (&thread);
-
-  /* Not reached... */
-  return 0;
-}