bgpd: Create `set distance XXX` command for routemaps

Allow bgp to set a local Administrative distance to use
for installing routes into the rib.

Example:
!
router bgp 9323
 bgp router-id 1.2.3.4
 neighbor enp0s8 interface remote-as external
 !
 address-family ipv4 unicast
  neighbor enp0s8 route-map DISTANCE in
 exit-address-family
!
route-map DISTANCE permit 10
 set distance 153
!
line vty
!
end
eva# show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
       O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
       T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
       F - PBR, f - OpenFabric,
       > - selected route, * - FIB route, q - queued route, r - rejected route

B   0.0.0.0/0 [153/0] via fe80::a00:27ff:fe84:c2d6, enp0s8, 00:00:06
K>* 0.0.0.0/0 [0/100] via 10.0.2.2, enp0s3, 00:06:31
B>* 1.1.1.1/32 [153/0] via fe80::a00:27ff:fe84:c2d6, enp0s8, 00:00:06
B>* 1.1.1.2/32 [153/0] via fe80::a00:27ff:fe84:c2d6, enp0s8, 00:00:06
B>* 1.1.1.3/32 [153/0] via fe80::a00:27ff:fe84:c2d6, enp0s8, 00:00:06
C>* 10.0.2.0/24 is directly connected, enp0s3, 00:06:31
K>* 169.254.0.0/16 [0/1000] is directly connected, enp0s3, 00:06:31
eva#

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

0 files changed, 0 insertions, 0 deletions