From 4a09f22f3d385589ee1a3d89aeb9595f993b447c Mon Sep 17 00:00:00 2001 From: Donald Sharp Date: Thu, 15 Jul 2021 08:10:10 -0400 Subject: [PATCH] doc: Document the maximum-paths command for bgp This was apparently missing from our documentation. Let's add it in. Signed-off-by: Donald Sharp --- doc/user/bgp.rst | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/doc/user/bgp.rst b/doc/user/bgp.rst index ac17328325..6b5a008761 100644 --- a/doc/user/bgp.rst +++ b/doc/user/bgp.rst @@ -401,6 +401,22 @@ Route Selection paths learned from any of eBGP, iBGP, or confederation neighbors will be multipath if they are otherwise considered equal cost. +.. clicmd:: maximum-paths (1-128) + + Sets the maximum-paths value used for ecmp calculations for this + bgp instance in EBGP. The maximum value listed, 128, can be limited by + the ecmp cli for bgp or if the daemon was compiled with a lower + ecmp value. This value can also be set in ipv4/ipv6 unicast/labeled + unicast to only affect those particular afi/safi's. + +.. clicmd:: maximum-paths ibgp (1-128) [equal-cluster-length] + + Sets the maximum-paths value used for ecmp calculations for this + bgp instance in IBGP. The maximum value listed, 128, can be limited by + the ecmp cli for bgp or if the daemon was compiled with a lower + ecmp value. This value can also be set in ipv4/ipv6 unicast/labeled + unicast to only affect those particular afi/safi's. + .. _bgp-distance: Administrative Distance Metrics -- 2.39.5