Igor Ryzhov [Mon, 29 Mar 2021 11:47:43 +0000 (14:47 +0300)]
ospfd: fix counting of "ip ospf area" commands
Instead of trying to maintain if_ospf_cli_count, let's directly count
the number of configured interfaces when it is needed. Current approach
sometimes leads to an incorrect counter.
Igor Ryzhov [Wed, 24 Mar 2021 10:16:15 +0000 (13:16 +0300)]
vtysh: hide "show configuration running" command
This command is currently useful only for developers.
Let's hide it to not confuse end users by having both
"show runnning-config" and "show configuration running".
Rafael Zalamena [Tue, 23 Mar 2021 15:19:20 +0000 (12:19 -0300)]
bgpd: improve BFD with timers configuration
Move `bgp_peer_config_apply` outside `bgp_peer_configure_bfd` (and
document it) so we only call the session installation once with one
set of timers. It also makes all calls of that function
equal (e.g. always calls `bgp_peer_config_apply` afterwards).
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Rafael Zalamena [Fri, 26 Feb 2021 19:50:51 +0000 (16:50 -0300)]
bgpd: rework BFD integration
Remove old BFD API usage and replace it with the new one.
Highlights:
- More shared code: the daemon gets notified with callbacks instead of
having to roll its own code to find the notified sessions.
- Less code to integrate with BFD.
- Remove hidden commands to configure single / multi hop. Use
protocol data instead.
BGP can determine if a peer is single/multi hop according to the
following criteria:
a. If the IP address is a link-local address (single hop)
b. The network is shared with peer (single hop)
c. BGP is configured for eBGP multi hop / TTL security (multi hop)
- Respect the configuration hierarchy:
a. Peer configuration take precendence over peer-group
configuration.
b. When peer group configuration is removed, reset peer
BFD configurations to defaults (unless peer had specific
configs).
Example:
neighbor foo peer-group
neighbor foo bfd profile X
neighbor 192.168.0.2 peer-group foo
neighbor 192.168.0.2 bfd
! If peer-group is removed the profile configuration gets
! removed from peer 192.168.0.2, but BFD will still enabled
! because of the neighbor specific bfd configuration.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Rafael Zalamena [Fri, 26 Feb 2021 19:51:00 +0000 (16:51 -0300)]
bgpd: remove cumulus specific code
The BFD function `bgp_bfd_is_peer_multihop` will no longer exist and now
both code paths are equal.
Longer explanation:
Cumulus was previously using the BFD function to help determine whether a
peer is multi hop or not, because there is a configuration to set BFD
to use single or multi hop.
Current BFD code can automatically pick between single/multi hop by
using the protocol information and so it is a good idea to have that
tested/used than relying on yet another duplicated information.
(BFD extracts the TTL information from protocol and selects
single/multi hop based on that)
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Igor Ryzhov [Tue, 16 Mar 2021 19:09:27 +0000 (22:09 +0300)]
ospfd: fix "show ip ospf database" issues
Current implementation of commands `show_ip_ospf_instance_database_cmd`
and `show_ip_ospf_instance_database_type_adv_router_cmd` have the
following problems:
- they doesn't have "vrf all" argument, however the processing of this
argument is implemented,
- they incorrectly implement json output for instances - they don't
output anything to the vty and don't release the json object.
To fix the problems, let's do the following:
1. Split `show_ip_ospf_instance_database_cmd` into two aliases to
`show_ip_ospf_database_max_cmd` and `show_ip_ospf_instance_database_max_cmd`.
The code is the same and doesn't need to be duplicated.
2. Split `show_ip_ospf_instance_database_type_adv_router_cmd` into two
separate functions - one regular and one for instances, which now
correctly implements the processing for json output.
vivek [Sun, 21 Mar 2021 20:39:51 +0000 (13:39 -0700)]
bgpd: Reset LLA NHT's interface if there is a change
For link-local IPv6 next hops, the next hop tracking is implemented based
on interface status changes. For this purpose, the ifindex is stored in
the NHT. Reset this value if a change in ifindex is noticed, such as for
example after a restart of the networking service.
Also add some additional debug logs.
Signed-off-by: Vivek Venkatraman <vivek@nvidia.com>
Updates: "bgpd: Switch LL nexthop tracking to be interface based"
Ticket: RM 2575386
Testing Done:
1. Manual verification
2. Precommit (#156), evpn-smoke (#155), bgp-smoke (#157), vrl (#158)
-- Precommit is clean, reported failures in evpn-smoke & vrl are resolved
-- some other tests fail in evpn-smoke, bgp-smoke & vrl, appear to be existing
-- or unrelated failures
David Lamparter [Tue, 2 Mar 2021 19:06:24 +0000 (20:06 +0100)]
lib: get rid of flog() usage in NB code
This parametrized use of flog with variable EC and priority doesn't mesh
particularly well with the xref code & there isn't really much reason to
not use fixed/constant calls like this.
Signed-off-by: David Lamparter <equinox@diac24.net>
no point in scheduling an LSP refresh immediately if we know it is
going to be postponed again due to the network still being in its
instability grace period
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
when we receive an event from BFDD and we end up throwing it away,
make sure that we log (with debug guards) the reason for this, so
we can troubleshoot issues like the one addressed by the previous
commit.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
A wrong check was silently skipping the initialization of the bfd_session
struct in the adjacency if the router was not configured for IPv6. This
would cause BFD events to be ignored regardless of the configuration.
Also add a function to return the "name" of an adjacency and use it in a
couple of places, including the new log, instead of repeating the same
code in a bunch of places.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
Chirag Shah [Thu, 18 Mar 2021 05:04:33 +0000 (22:04 -0700)]
doc: add seqno to bgp as path list section
Add sequence no option to bgp as-path list cli syntax.
Add sequence no to example config.
Add auto generated sequence no in running-config if its not
provided in config.
David Lamparter [Tue, 16 Mar 2021 05:11:15 +0000 (06:11 +0100)]
tests: simplify docker rsync & support worktrees
The previous, more complex mechanism failed to take into account that
git worktrees only have a stub .git file & copying the worktree itself
is not enough. Just extract a file list beforehand & don't bother with
git inside the container.
Signed-off-by: David Lamparter <equinox@diac24.net>
projects / mirror / frr.git / log