Martin Winter [Wed, 20 Feb 2019 13:09:03 +0000 (05:09 -0800)]
redhat: Require newer libyang (> 0.16.74) for embedded extensions
The support of embedded extensions doesn't allow to build the
RPM with and without (for older version). Require new version of
Lbyang with embedded extensions supported
Signed-off-by: Martin Winter <mwinter@opensourcerouting.org>
Renato Westphal [Sat, 19 Jan 2019 19:24:09 +0000 (17:24 -0200)]
python: make DEFPY provide the text token of fixed parameters
In the CLI code, each cmd_token has both a "text" field, containing
the full token text (e.g. "unicast"), and an "arg" field,
containing the original text entered by the user (which might be
an abbreviation, like "uni" instead of "unicast").
To avoid the need to handle abbreviations, the recommended pattern
for DEFUN commands is to use the "text" value of fixed parameters
and the "arg" value of everything else.
Using DEFPY, however, the CLI parameters are automagically turned
into C variables which are initialized under the hood (so that
they're conveniently ready for use). The problem is that this
initialization was always using the "arg" value of the parameters,
which was leading to problems like these:
debian# show ipv6 route isi
Unknown route type
debian#
debian# conf t
debian(config)# router isis 1
debian(config-router)# redistribute ipv4 st level-1
% Configuration failed.
Invalid value "st" in "protocol" element.
YANG path: /frr-isisd:isis/instance[area-tag='1']/redistribute/ipv4[protocol='st']/protocol
To fix these problems (and probably others too), make DEFPY commands
auto-detect the type of the input parameters and use either the
"arg" or "text" value from the cmd_tokens accordingly.
Renato Westphal [Sat, 19 Jan 2019 19:19:13 +0000 (17:19 -0200)]
lib: remove the vrf_is_mapped_on_netns() function
Now that all daemons receive the VRF backend from zebra, we can get
rid of vrf_is_mapped_on_netns() in favor of using the more convenient
vrf_is_backend_netns() function, which doesn't require any argument.
This commit also fixes the following problem:
debian(config)# ip route 50.0.0.0/8 blackhole vrf FAKE table 2
% table param only available when running on netns-based vrfs
Even when zebra was started with the --vrfwnetns, the error
above would be displayed since the VRF FAKE didn't exist, which
would make vrf_is_mapped_on_netns() return 0 incorrectly. Using
vrf_is_backend_netns() this problem doesn't happen anymore.
Renato Westphal [Sat, 19 Jan 2019 19:19:13 +0000 (17:19 -0200)]
zebra, lib: send VRF backend to the client daemons
Add a new field in the ZEBRA_CAPABILITIES zapi message specifying
the VRF backend in use.
For simplicity, make the zclient code call vrf_configure_backend()
to apply the received value automatically instead of requiring
the daemons to do that themselves in their zebra_capabilities()
callbacks.
Additionally, call zebra_vrf_update_all() only after sending the
capabilities message to the client, so that it will know which VRF
backend is in use when processing the VRF messages.
This commit fixes a couple of bugs in the "interface" CLI command and
associated northbound callbacks, which behave differently depending
on the VRF backend in use. Before this commit, the vrf_backend
variable would always be set to VRF_BACKEND_NETNS in the client
daemons, even when zebra was started without the --vrfwnetns option.
This could lead to inconsistent behavior and subtle bugs under
specific circumstances.
Renato Westphal [Sat, 19 Jan 2019 01:23:45 +0000 (23:23 -0200)]
lib: simplify detection of when the user is leaving the CLI config mode
We can make use of the vty->config variable to know when the CLI
user is in the configuration mode or not. This is much simpler
than obtaining this information from the vty node, and also a more
robust solution (the three switch statements below, for example,
were out of sync).
Also, fix a bug where vty->config wasn't being unset in the
vty_config_exit() function (bug introduced by commit f344c66ea3).
Renato Westphal [Sat, 19 Jan 2019 00:58:58 +0000 (22:58 -0200)]
lib: reset the vty xpath index when entering the config mode
The CLI code uses the vty->xpath[] array and the vty->xpath_index
variables to keep track of where the user is in the configuration
hierarchy. As such, we were resetting vty->xpath_index to zero
whenever the user exited from the configuration mode in order to
keep the index valid. We weren't doing this in the vty_stop_input()
function however, which is called when the user types ^C in the
terminal. This was leading to bugs like this:
zebra> en
zebra# conf t
zebra(config)# interface eth0
zebra(config-if)# ^C
zebra# conf t
zebra(config)# interface eth0
% Configuration failed.
Schema node not found.
YANG path: /frr-interface:lib/interface[name='eth0'][vrf='default']/frr-interface:lib
To fix this, do something more clever: instead of resetting the
XPath index whenever the user exits from the configuration mode,
do that when the user enters in the configuration mode. This way
the XPath index needs to be reset in a single place only, not to
mention it's a more robust solution.
Renato Westphal [Fri, 18 Jan 2019 18:06:00 +0000 (16:06 -0200)]
zebra: send link parameters to zclients once they request interface info
We were sending ZEBRA_INTERFACE_LINK_PARAMS messages under the
following circumstances:
* New interface was created (via kernel or config);
* Interface went from down to up;
* Update in the link-params configuration.
Now also send ZEBRA_INTERFACE_LINK_PARAMS messages whenever a zclient
connects and sends a ZEBRA_INTERFACE_ADD request. Without this fix,
the client daemons don't receive interface link parameters if they
are configured in the zebra startup configuration.
Renato Westphal [Fri, 18 Jan 2019 18:06:00 +0000 (16:06 -0200)]
lib: fix checking of clients subscribed to receive default routes
In these two functions, we were using VRF_DEFAULT instead of the
VRF ID passed as a parameter when checking if the given client
subscribed to receive default routes or not. This prevented the
"default-originate" command from ospfd/isisd from working correctly
under specific circumstances.
Renato Westphal [Mon, 14 Jan 2019 18:29:18 +0000 (16:29 -0200)]
doc: update build instructions for freebsd on how to obtain libyang
Unfortunately the first version of the FreeBSD libyang port contained
a bug in which the libyang pkginfo file wasn't being installed
correctly in the system, and this prevented the FRR build system from
detecting the library. This bug was already fixed months ago but some
FreeBSD package repositories still have the old bugged version of the
port. This means we can't suggest people to install libyang using
"pkg install" since this causes problems for most people. In this
case, suggest FreeBSD users to build and install libyang manually
as we suggest for other BSD platforms.
This commit should be reverted once all FreeBSD package repositories
are updated with the new version of the libyang port.
Renato Westphal [Mon, 14 Jan 2019 18:29:18 +0000 (16:29 -0200)]
lib: update suggestions related to some northbound errors
Since commit 3a11599c, the FRR YANG modules are embedded inside the
binaries and no longer need to be loaded from the file system. This
way, it's impossible for the FRR binaries and YANG modules to be out
of sync anymore. As such, update the suggestions of the northbound
error codes.
Renato Westphal [Mon, 14 Jan 2019 18:29:18 +0000 (16:29 -0200)]
lib: don't abort when incomplete xpath is given by the user
Instead of aborting when an incomplete xpath is given to the
nb_oper_data_iterate() function, just return an error so that the
callers have a chance to treat this error. Aborting based on invalid
user input is never the right thing to do.
Renato Westphal [Mon, 14 Jan 2019 18:29:18 +0000 (16:29 -0200)]
lib: fix "use of uninitialised value" valgrind warning
When FRR is built without the --enable-config-rollbacks option,
the nb_db_transaction_save() function does nothing and the
"transaction_id" output parameter is left uninitialized. For
this reason, all northbound clients should initialize the
"transaction_id" argument before calling nb_candidate_commit() or
nb_candidate_commit_apply() (except when a NULL pointer is given,
which is the case of the confd and sysrepo plugins).
Renato Westphal [Mon, 14 Jan 2019 18:29:18 +0000 (16:29 -0200)]
lib: fix "may be used uninitialized" build warning
We are already handling all possible four cases from the "nb_event"
enumeration, so this problem can't happen in practice. Initialize the
"ref" variable to zero to silence the warning.
Renato Westphal [Fri, 11 Jan 2019 21:20:13 +0000 (19:20 -0200)]
lib, zebra: add AFI parameter to the ZEBRA_REDISTRIBUTE_DEFAULT_* messages
Some daemons like ospfd and isisd have the ability to advertise a
default route to their peers only if one exists in the RIB. This
is what the "default-information originate" commands do when used
without the "always" parameter.
For that to work, these daemons use the ZEBRA_REDISTRIBUTE_DEFAULT_ADD
message to request default route information to zebra. The problem
is that this message didn't have an AFI parameter, so a default route
from any address-family would satisfy the requests from both daemons
(e.g. ::/0 would trigger ospfd to advertise a default route to its
peers, and 0.0.0.0/0 would trigger isisd to advertise a default route
to its IPv6 peers).
Fix this by adding an AFI parameter to the
ZEBRA_REDISTRIBUTE_DEFAULT_{ADD,DELETE} messages and making the
corresponding code changes.
David Lamparter [Mon, 18 Feb 2019 20:34:06 +0000 (21:34 +0100)]
isisd: skip over deleted fragments
Since LSP fragments are also on our lspdb dict, lsp_tick() needs to skip
over them after calling lsp_destroy(). Otherwise it ends up accessing
free'd memory.
Fixes: #3533 Signed-off-by: David Lamparter <equinox@diac24.net>
Philippe Guibert [Thu, 14 Feb 2019 13:04:45 +0000 (14:04 +0100)]
ospf6d: upon interface deletion, the area if list may be updated
there are some events where the list of interfaces per area should be
reviewed due to an interface is being removed. This fix avoids having
some memory leak.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Chirag Shah [Sat, 26 Jan 2019 01:21:24 +0000 (17:21 -0800)]
ospfd: address CVE-2017-3224
Based on the vulnerability mentioned in 793496 an attacker can craft an
LSA with MaxSequence number wtih invalid links and not set age to MAX_AGE
so the lsa would not be flush from the database.
To address the issue, check incoming LSA is MaxSeq but Age is not set
to MAX_AGE 3600, discard the LSA from processing it.
Based on RFC-2328 , When a LSA update sequence reaches MaxSequence
number, it should be prematurely aged out from the database with age set
to MAX_AGE (3600).
Ticket:CM-18989
Reviewed By:
Testing Done:
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Philippe Guibert [Mon, 21 Jan 2019 16:19:53 +0000 (17:19 +0100)]
bgpd: do not crash when removing ip vpn entries
when removing bgp instance, the parsing of rm->info contexts must be
protected. Also, the main level of hierarchy of rds must not be
allocated more than once.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Note that sysinit.target does not depend on any network* service or
target.
In other words, unless there is a service that requires
network-online.service, even if FRR is enabled it will not be started.
Therefore network-online.target is the wrong unit to have in WantedBy=,
as it is not always started.
This patch updates our service file so that it is properly started by
the system when enabled, delayed until networking is up, and if possible
delayed until after NetworkManager, systemd-networkd or any other
networking configuration manager has finished performing its tasks -
i.e. after network-online.target.
After these changes our new dependency graph looks like this:
David Lamparter [Mon, 4 Feb 2019 21:56:50 +0000 (22:56 +0100)]
lib: yang: use common yang_ctx_new_setup()
After creating a libyang context, we need to hook up our callback to use
embedded built-in modules. I hadn't added this to the yang translator
code.
Also, ly_ctx_new fails if the search directory doesn't exist. Since
that's not a hard error for us, work around that and ignore inaccessible
YANG_MODELS_DIR. (This is needed for snap packages.)
Signed-off-by: David Lamparter <equinox@diac24.net>
David Lamparter [Wed, 30 Jan 2019 17:11:54 +0000 (18:11 +0100)]
build: fix a whole bunch of *FLAGS
- some target_CFLAGS that needed to include AM_CFLAGS didn't do so
- libyang/sysrepo/sqlite3/confd CFLAGS + LIBS weren't used at all
- consistently use $(FOO_CFLAGS) instead of @FOO_CFLAGS@
- 2 dependencies were missing for clippy
Signed-off-by: David Lamparter <equinox@diac24.net>
David Lamparter [Fri, 30 Nov 2018 20:42:25 +0000 (21:42 +0100)]
build, lib/yang: bake in extensions if possible
Starting with libyang 0.16.74, we can load internally embedded yang
extensions instead of going through the file system/dlopen. Detect
support for this at build time and use if available.
NB: the fallback mechanism will go away in a short while.
Signed-off-by: David Lamparter <equinox@diac24.net>
Philippe Guibert [Mon, 28 Jan 2019 16:54:50 +0000 (17:54 +0100)]
bgpd: detach vrf labels allocated, when removing bgp instance
bgp instance is disabling the label allocated to reach vrf entity.
previously, only vrf disabling was removing the label. now, when bgp
leaves, bgp instance also frees the label used.
PR=62306 Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com> Acked-by: Julien Floret <julien.floret@6wind.com>
Rafael Zalamena [Wed, 23 Jan 2019 12:25:30 +0000 (10:25 -0200)]
ospf6d: keep track of the socket set thread
When using the timer to set the socket multicast options, keep track
of the thread pointer. If we lose the thread reference we might have
situations where multicast is enabled when it should be disabled and
vice versa.
Renato Westphal [Tue, 22 Jan 2019 19:50:33 +0000 (17:50 -0200)]
ldpd: fix corner case in which we wouldn't respect the max pdu length
The calculation to know when an LDP PDU went past the maximum
negotiated PDU length was wrong because it wasn't taking the
"Version" and "PDU Length" fields into account (total of four
bytes). Fix this.
Rafael Zalamena [Thu, 17 Jan 2019 22:46:11 +0000 (20:46 -0200)]
zebra: fix routing socket AF_LINK handling on NETMASK
IPv6 netmasks use AF_LINK family type and puts the correct amount of
set bits in the data structure. If we only copy the SDL header we
won't get all IPv6 address length, we must copy the whole extension of
the `sockaddr_in6` struct (which is provided in `destlen` parameter).
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
the command was not checking
correctly in all cases whether the virtual link existed. This caused
bugs in some corner cases, e.g. when two virtual links were created,
one of them was deleted, and the second one was reset with no
authentication - this would instead create a new virtual link with
the area in decimal format.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
Philippe Guibert [Fri, 28 Dec 2018 13:27:45 +0000 (14:27 +0100)]
zebra: do not create vrf if name already set to default vrf at startup
if the default vrf name is manually set, by passing -o parameter to
zebra, then this should be detected when walking the list of netns
available in the system. If a netns called vrf0 is present, then it
should be ignored.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Philippe Guibert [Fri, 21 Dec 2018 15:25:20 +0000 (16:25 +0100)]
zebra: start the netns notification mechanism after ns initialisation
when zebra is run, by using vrf netns backend mode, then the parser
detector of netns is run before forcing the default vrf to a possible
value. In that case, there is a possibility that the forced '-o' option
will create a second vrf with same name, whereas this option should be
there to uniquely have a default vrf with a value.
To make things consistent, the forced value will be priorised. Then, the
notifier will attempt to create vrf contexts. The expectation is that
the creation will fail, due to an already present vrf with same name.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
bgpd: flowspec redirect IP info is retrieved into nh tracking
redirect IP nh of flowspec entry is retrieved so that the nexthop
IP information is injected into the nexthop tracking, and is associated
to the bgp_path structure. This permits validating or unvalidating the
bgp_path for injection in zebra or not.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Philippe Guibert [Tue, 18 Dec 2018 17:00:31 +0000 (18:00 +0100)]
zebra: handle multiple events for netns deletion event
When handling events from /var/run/netns folder, if several netns are
removed at the same time, only the first one is deleted in the frr. Fix
this behaviour by applying continue in the loop.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Donald Sharp [Wed, 9 Jan 2019 17:18:21 +0000 (12:18 -0500)]
lib: Convert RUSAGE_SELF to RUSAGE_THREAD where we can
When using getrusage, we have multiple choices about what
to call for data gathering about this particular thread of execution.
RUSAGE_SELF -> This means gather all cpu run time for all pthreads associated
with this process.
RUSAGE_THREAD -> This means gather all cpu run time for this particular
pthread.
Clearly with data gathering for slow thread as well as `show thread cpu`
it would be preferable to gather only data about the current running
pthread. This probably was the original behavior of using RUSAGE_SELF
when we didn't have multiple pthreads. So it didn't matter so much.
Prior to this change, 10 iterations of 1 million routes install/remove
from zebra would give us this cpu time for the dataplane pthread:
Showing statistics for pthread Zebra dplane thread
--------------------------------------------------
CPU (user+system): Real (wall-clock):
Active Runtime(ms) Invoked Avg uSec Max uSecs Avg uSec Max uSecs Type Thread
0 280902.149 326541 860 2609982 550 2468910 E dplane_thread_loop
After this change we are seeing this:
Showing statistics for pthread Zebra dplane thread
--------------------------------------------------
CPU (user+system): Real (wall-clock):
Active Runtime(ms) Invoked Avg uSec Max uSecs Avg uSec Max uSecs Type Thread
0 58045.560 334944 173 277226 539 2502268 E dplane_thread_loop
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Donald Sharp [Wed, 9 Jan 2019 19:59:22 +0000 (14:59 -0500)]
lib, bgpd: Convert frr_pthread_set_name to only cause it to set os name of the thread
The current invocation of frr_pthread_set_name was causing it reset the os_name.
There is no need for this, we now always create the pthread appropriately
to have both name and os_name. So convert this function to a simple
call through of the pthread call now.
Before(any of these changes):
sharpd@robot ~/frr1> ps -L -p 16895
PID LWP TTY TIME CMD
16895 16895 ? 00:01:39 bgpd
16895 16896 ? 00:00:54
16895 16897 ? 00:00:07 bgpd_ka
Donald Sharp [Wed, 9 Jan 2019 19:32:44 +0000 (14:32 -0500)]
lib: Cleanup thread name setting to happen at start
When we start a thread we always call fpt_run and since
the last commit we know os_name is filled with something,
therefore we can just set the name on startup.
I removed the abstraction to frr_pthread_set_name because
it was snprintf'ing into the same buffer which was the
real bug here( the first character of os_name became null).
In the next commit I'll remove that api because
it is unneeded and was a horrible hack to get
this to work for the one place it was wanted.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Donald Sharp [Wed, 9 Jan 2019 18:41:46 +0000 (13:41 -0500)]
lib: On frr_pthread_new save a os_name
On call of frr_pthread_new, save the os_name if given,
if not given use the name passed in( shortening to fit
in available space ) and finally if the name was not
passed in use the default value.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Donald Sharp [Wed, 9 Jan 2019 13:48:37 +0000 (08:48 -0500)]
bgpd: Do not send a label to zebra that it doesn't understand
When using an `import vrf` mechanism we are marking
the vrf label as BGP_PREVENT_VRF_2_VRF_LEAK, and then sending
this down to zebra. Since zebra knows nothing about this special
value, convert it to a value that it does know MPLS_LABEL_NONE.
And zebra kept the label as:
donna.cumulusnetworks.com# show mpls table
Inbound Outbound
Label Type Nexthop Label
-------- ------- --------------- --------
-2 BGP GREEN
-2 BGP BLUE
After this fix, neither the labels are stored in zebra nor do we see
the log error message.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Rafael Zalamena [Tue, 8 Jan 2019 12:32:28 +0000 (10:32 -0200)]
zebra: fix FreeBSD warning on fresh OS boot
Handle corner case where a warning log message is issued on interface
address netmask handling with sockaddr type AF_LINK: it may come empty
or with match all (all 0xFF).
In the first case all lengths are zero and we only need to copy the
first bytes, second case it comes with a zero index and all 0xFF bytes.
In any case we only need to figure out a few of the first bytes instead
of all data.
Rafael Zalamena [Tue, 8 Jan 2019 10:14:28 +0000 (08:14 -0200)]
zebra: implement FreeBSD route attr handling
When porting routing socket macro data handling to functions, the
attribute function was forgotten. The only difference between the
attribute and address handler is the family type check.
projects / mirror / frr.git / log