paths key is not there for
'show bgp l2vpn evpn route rd <rd-id> mac <mac> json' uses
evpn prefix as key for each path.
Replace the evpn prefix with "paths".
This aligned with overall EVPN RIB json output like
'show bgp l2vpn evpn route json'
'show bgp l2vpn evpn route rd <> type 2 json'
ospfd: Fix heap corruption vulnerability when parsing SR-Algorithm TLV
When parsing the SR-Algorithm TLV in the OSPF Router Information Opaque
LSA, assure that not more than the maximum number of supported
algorithms are copied from the TLV.
When an NHRP peer was forwarding a message, it was copying all
extensions from the originally received packet. The authentication
extension must be regenerated hop by hop per RFC2332.
This fix checks for the auth extension when copying extensions
and omits the original packet auth and instead regenerates a new auth extension.
Donatas Abraitis [Fri, 14 Jun 2024 13:33:32 +0000 (16:33 +0300)]
docker: Set ABUILD_APK_INDEX_OPTS for frr build
In build() stage of abuild, it does `apk index ...` where frr* packages
are unsigned. We don't sign them here, and thus we need to specify `--allow-untrusted`.
Donatas Abraitis [Fri, 14 Jun 2024 08:37:23 +0000 (11:37 +0300)]
docker: Set ABUILD_APK_INDEX_OPTS for libyang
In build() stage of abuild, it does `apk index ...` where libyang* packages
are unsigned. We don't sign them here, and thus we need to specify `--allow-untrusted`.
Louis Scalbert [Tue, 27 Aug 2024 16:22:27 +0000 (18:22 +0200)]
isisd: fix update link params after circuit is up
If the link-params are set when the circuit not yet up, the link-params
are never updated.
isis_link_params_update() is called from isis_circuit_up() but returns
immediately because circuit->state != C_STATE_UP. circuit->state is
updated in isis_csm_state_change after isis_circuit_up().
Do not return isis_link_params_update() if circuit->state != C_STATE_UP.
Fixes: 0fdd8b2b11 ("isisd: update link params after circuit is up") Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
(cherry picked from commit 6ce6b7a8564f661495fec17f3ea33eeaf9e2f48c)
Louis Scalbert [Tue, 20 Aug 2024 08:33:30 +0000 (10:33 +0200)]
bgpd: fix crash at no rpki
When 'no rpki' is requested and the rtrlib RPKI object was freed, bgpd
is crashing.
RPKI is configured in VRF red.
> ip l set red down
> ip l del red
> printf 'conf\n vrf red\n no rpki' | vtysh
> Core was generated by `/usr/bin/bgpd -A 127.0.0.1 -M snmp -M rpki -M bmp'.
> Program terminated with signal SIGSEGV, Segmentation fault.
> #0 __pthread_kill_implementation (no_tid=0, signo=11, threadid=140411103615424) at ./nptl/pthread_kill.c:44
> 44 ./nptl/pthread_kill.c: No such file or directory.
> [Current thread is 1 (Thread 0x7fb401f419c0 (LWP 190226))]
> (gdb) bt
> #0 __pthread_kill_implementation (no_tid=0, signo=11, threadid=140411103615424) at ./nptl/pthread_kill.c:44
> #1 __pthread_kill_internal (signo=11, threadid=140411103615424) at ./nptl/pthread_kill.c:78
> #2 __GI___pthread_kill (threadid=140411103615424, signo=signo@entry=11) at ./nptl/pthread_kill.c:89
> #3 0x00007fb4021ad476 in __GI_raise (sig=11) at ../sysdeps/posix/raise.c:26
> #4 0x00007fb4025ce22b in core_handler (signo=11, siginfo=0x7fff831b2d70, context=0x7fff831b2c40) at lib/sigevent.c:248
> #5 <signal handler called>
> #6 rtr_mgr_remove_group (config=0x55fe8789f750, preference=11) at /build/make-pkg/output/source/DIST_RTRLIB/rtrlib/rtrlib/rtr_mgr.c:607
> #7 0x00007fb40145f518 in rpki_delete_all_cache_nodes (rpki_vrf=0x55fe8789f4f0) at bgpd/bgp_rpki.c:442
> #8 0x00007fb401463098 in no_rpki_magic (self=0x7fb40146bba0 <no_rpki_cmd>, vty=0x55fe877f5130, argc=2, argv=0x55fe877fccd0) at bgpd/bgp_rpki.c:1732
> #9 0x00007fb40145c09a in no_rpki (self=0x7fb40146bba0 <no_rpki_cmd>, vty=0x55fe877f5130, argc=2, argv=0x55fe877fccd0) at ./bgpd/bgp_rpki_clippy.c:37
> #10 0x00007fb402527abc in cmd_execute_command_real (vline=0x55fe877fd150, vty=0x55fe877f5130, cmd=0x0, up_level=0) at lib/command.c:984
> #11 0x00007fb402527c35 in cmd_execute_command (vline=0x55fe877fd150, vty=0x55fe877f5130, cmd=0x0, vtysh=0) at lib/command.c:1043
> #12 0x00007fb4025281e5 in cmd_execute (vty=0x55fe877f5130, cmd=0x55fe877fb8c0 "no rpki\n", matched=0x0, vtysh=0) at lib/command.c:1209
> #13 0x00007fb4025f0aed in vty_command (vty=0x55fe877f5130, buf=0x55fe877fb8c0 "no rpki\n") at lib/vty.c:615
> #14 0x00007fb4025f2a11 in vty_execute (vty=0x55fe877f5130) at lib/vty.c:1378
> #15 0x00007fb4025f513d in vtysh_read (thread=0x7fff831b5fa0) at lib/vty.c:2373
> #16 0x00007fb4025e9611 in event_call (thread=0x7fff831b5fa0) at lib/event.c:2011
> #17 0x00007fb402566976 in frr_run (master=0x55fe871a14a0) at lib/libfrr.c:1212
> #18 0x000055fe857829fa in main (argc=9, argv=0x7fff831b6218) at bgpd/bgp_main.c:549
Fixes: 8156765abe ("bgpd: Add `no rpki` command") Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
(cherry picked from commit 4e053d65f1c7edbcc3391026300388513d4c31b0)
There is also an issue when doing "rpki reset" and then "no rpki".
Dmytro Shytyi [Thu, 8 Aug 2024 13:42:40 +0000 (15:42 +0200)]
topotest: test_bgp_snmp_bgpv4v2_notification
This test checks the bgp crash on rt2 when 2 commands
launched consequently:
T0: rr, config -> router bgp 65004 -> neighbor 192.168.12.2 password 8888
T1: rt2, snmpwalk -v 2c -c public 127.0.0.1 .1.3.6.1.4.1.7336.4.2.1
T2: test if rt2 bgp is crashed.
Donald Sharp [Sat, 10 Aug 2024 23:43:08 +0000 (19:43 -0400)]
zebra: Ensure non-equal id's are not same nhg's
The function zebra_nhg_hash_equal is only used
as a hash function for storage of NHG's and retrieval.
If you have say two nhg's:
31 (25/26)
32 (25/26)
This function would return them as being equal. Which
of course leads to the problem when you attempt to
hash_release 32 but release 31 from the hash. Then later
when you attempt to do hash comparisons 32 has actually
been freed leaving to use after free situations and shit
goes down hill fast.
This hash is only used as part of the hash comparison
function for nexthop group storage. Since this is so
let's always return the 31/32 nhg's are not equal at all.
We possibly have a different problem where we are creating
31 and 32 ( when 31 should have just been used instead of 32 )
but we need to prevent any type of hash release problem at all.
This supercedes any other issue( that should be tracked down
on it's own ). Since you can have use after free situation
that leads to a crash -vs- some possible nexthop group duplication
which is very minor in comparison.
ospfd: fix internal ldp-sync state flags when feature is disabled
When enabling "mpls ldp-sync" under "router ospf" ospfd configures
SET_FLAG(ldp_sync_info->flags, LDP_SYNC_FLAG_IF_CONFIG) so internally knowing
that the ldp-sync feature is enabled. However the flag is not cleared when
turning of the feature using "nompls ldp-sync"!
Louis Scalbert [Fri, 28 Jun 2024 11:22:36 +0000 (13:22 +0200)]
pimd: fix crash on non-existent interface
Fix the following crash when pim options are (un)configured on an
non-existent interface.
> r1(config)# int fgljdsf
> r1(config-if)# no ip pim unicast-bsm
> vtysh: error reading from pimd: Connection reset by peer (104)Warning: closing connection to pimd because of an I/O error!
> #0 raise (sig=<optimized out>) at ../sysdeps/unix/sysv/linux/raise.c:50
> #1 0x00007f70c8f32249 in core_handler (signo=11, siginfo=0x7fffff88e4f0, context=0x7fffff88e3c0) at lib/sigevent.c:258
> #2 <signal handler called>
> #3 0x0000556cfdd9b16d in lib_interface_pim_address_family_unicast_bsm_modify (args=0x7fffff88f130) at pimd/pim_nb_config.c:1910
> #4 0x00007f70c8efdcb5 in nb_callback_modify (context=0x556d00032b60, nb_node=0x556cffeeb9b0, event=NB_EV_APPLY, dnode=0x556d00031670, resource=0x556d00032b48, errmsg=0x7fffff88f710 "", errmsg_len=8192)
> at lib/northbound.c:1538
> #5 0x00007f70c8efe949 in nb_callback_configuration (context=0x556d00032b60, event=NB_EV_APPLY, change=0x556d00032b10, errmsg=0x7fffff88f710 "", errmsg_len=8192) at lib/northbound.c:1888
> #6 0x00007f70c8efee82 in nb_transaction_process (event=NB_EV_APPLY, transaction=0x556d00032b60, errmsg=0x7fffff88f710 "", errmsg_len=8192) at lib/northbound.c:2016
> #7 0x00007f70c8efd658 in nb_candidate_commit_apply (transaction=0x556d00032b60, save_transaction=true, transaction_id=0x0, errmsg=0x7fffff88f710 "", errmsg_len=8192) at lib/northbound.c:1356
> #8 0x00007f70c8efd78e in nb_candidate_commit (context=..., candidate=0x556cffeb0e80, save_transaction=true, comment=0x0, transaction_id=0x0, errmsg=0x7fffff88f710 "", errmsg_len=8192) at lib/northbound.c:1389
> #9 0x00007f70c8f03e58 in nb_cli_classic_commit (vty=0x556d00025a80) at lib/northbound_cli.c:51
> #10 0x00007f70c8f043f8 in nb_cli_apply_changes_internal (vty=0x556d00025a80,
> xpath_base=0x7fffff893bb0 "/frr-interface:lib/interface[name='fgljdsf']/frr-pim:pim/address-family[address-family='frr-routing:ipv4']", clear_pending=false) at lib/northbound_cli.c:178
> #11 0x00007f70c8f0475d in nb_cli_apply_changes (vty=0x556d00025a80, xpath_base_fmt=0x556cfdde9fe0 "./frr-pim:pim/address-family[address-family='%s']") at lib/northbound_cli.c:234
> #12 0x0000556cfdd8298f in pim_process_no_unicast_bsm_cmd (vty=0x556d00025a80) at pimd/pim_cmd_common.c:3493
> #13 0x0000556cfddcf782 in no_ip_pim_ucast_bsm (self=0x556cfde40b20 <no_ip_pim_ucast_bsm_cmd>, vty=0x556d00025a80, argc=4, argv=0x556d00031500) at pimd/pim_cmd.c:4950
> #14 0x00007f70c8e942f0 in cmd_execute_command_real (vline=0x556d00032070, vty=0x556d00025a80, cmd=0x0, up_level=0) at lib/command.c:1002
> #15 0x00007f70c8e94451 in cmd_execute_command (vline=0x556d00032070, vty=0x556d00025a80, cmd=0x0, vtysh=0) at lib/command.c:1061
> #16 0x00007f70c8e9499f in cmd_execute (vty=0x556d00025a80, cmd=0x556d00030320 "no ip pim unicast-bsm", matched=0x0, vtysh=0) at lib/command.c:1227
> #17 0x00007f70c8f51e44 in vty_command (vty=0x556d00025a80, buf=0x556d00030320 "no ip pim unicast-bsm") at lib/vty.c:616
> #18 0x00007f70c8f53bdd in vty_execute (vty=0x556d00025a80) at lib/vty.c:1379
> #19 0x00007f70c8f55d59 in vtysh_read (thread=0x7fffff896600) at lib/vty.c:2374
> #20 0x00007f70c8f4b209 in event_call (thread=0x7fffff896600) at lib/event.c:2011
> #21 0x00007f70c8ed109e in frr_run (master=0x556cffdb4ea0) at lib/libfrr.c:1217
> #22 0x0000556cfdddec12 in main (argc=2, argv=0x7fffff896828, envp=0x7fffff896840) at pimd/pim_main.c:165
> (gdb) f 3
> #3 0x0000556cfdd9b16d in lib_interface_pim_address_family_unicast_bsm_modify (args=0x7fffff88f130) at pimd/pim_nb_config.c:1910
> 1910 pim_ifp->ucast_bsm_accept =
> (gdb) list
> 1905 case NB_EV_ABORT:
> 1906 break;
> 1907 case NB_EV_APPLY:
> 1908 ifp = nb_running_get_entry(args->dnode, NULL, true);
> 1909 pim_ifp = ifp->info;
> 1910 pim_ifp->ucast_bsm_accept =
> 1911 yang_dnode_get_bool(args->dnode, NULL);
> 1912
> 1913 break;
> 1914 }
> (gdb) p pim_ifp
> $1 = (struct pim_interface *) 0x0
Fixes: 3bb513c399 ("lib: adapt to version 2 of libyang") Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
(cherry picked from commit 6952bea5cdd38057bf8c0a5e9c0fbe916dc73953)
isisd: fix crash when calculating the neighbor spanning tree based on the fragmented LSP
1. When the root IS regenerates an LSP, it calls lsp_build() -> lsp_clear_data() to free the TLV memory of the first fragment and all other fragments. If the number of fragments in the regenerated LSP decreases or if no fragmentation is needed, the extra LSP fragments are not immediately deleted. Instead, lsp_seqno_update() -> lsp_purge() is called to set the remaining time to zero and start aging, while also notifying other IS nodes to age these fragments. lsp_purge() usually does not reset lsp->hdr.seqno to zero because the LSP might recover during the aging process.
2. When other IS nodes receive an LSP, they always call process_lsp() -> isis_unpack_tlvs() to allocate TLV memory for the LSP. This does not differentiate whether the received LSP has a remaining lifetime of zero. Therefore, it is rare for an LSP of a non-root IS to have empty TLVs. Of course, if an LSP with a remaining time of zero and already corrupted is received, lsp_update() -> lsp_purge() will be called to free the TLV memory of the LSP, but this scenario is rare.
3. In LFA calculations, neighbors of the root IS are traversed, and each neighbor is taken as a new root to compute the neighbor SPT. During this process, the old root IS will serve as a neighbor of the new root IS, triggering a call to isis_spf_process_lsp() to parse the LSP of the old root IS and obtain its IP vertices and neighboring IS vertices. However, isis_spf_process_lsp() only checks whether the TLVs in the first fragment of the LSP exist, and does not check the TLVs in the fragmented LSP. If the TLV memory of the fragmented LSP of the old root IS has been freed, it can lead to a null pointer access, causing the current crash.
Additionally, for the base SPT, there are only two places where the LSP of the root IS is parsed:
1. When obtaining the UP neighbors of the root IS via spf_adj_list_parse_lsp().
2. When preloading the IP vertices of the root IS via isis_lsp_iterate_ip_reach().
Both of these checks ensure that frag->tlvs is not null, and they do not subsequently call isis_spf_process_lsp() to parse the root IS's LSP. It is very rare for non-root IS LSPs to have empty TLVs unless they are corrupted LSPs awaiting deletion. If it happens, a crash will occur.
The backtrace is as follows:
(gdb) bt
#0 0x00007f3097281fe1 in raise () from /lib/x86_64-linux-gnu/libpthread.so.0
#1 0x00007f30973a2972 in core_handler (signo=11, siginfo=0x7ffce66c2870, context=0x7ffce66c2740) at ../lib/sigevent.c:261
#2 <signal handler called>
#3 0x000055dfa805512b in isis_spf_process_lsp (spftree=0x55dfa950eee0, lsp=0x55dfa94cb590, cost=10, depth=1, root_sysid=0x55dfa950ef6c "", parent=0x55dfa952fca0)
at ../isisd/isis_spf.c:898
#4 0x000055dfa805743b in isis_spf_loop (spftree=0x55dfa950eee0, root_sysid=0x55dfa950ef6c "") at ../isisd/isis_spf.c:1688
#5 0x000055dfa805784f in isis_run_spf (spftree=0x55dfa950eee0) at ../isisd/isis_spf.c:1808
#6 0x000055dfa8037ff5 in isis_spf_run_neighbors (spftree=0x55dfa9474440) at ../isisd/isis_lfa.c:1259
#7 0x000055dfa803ac17 in isis_spf_run_lfa (area=0x55dfa9477510, spftree=0x55dfa9474440) at ../isisd/isis_lfa.c:2300
#8 0x000055dfa8057964 in isis_run_spf_with_protection (area=0x55dfa9477510, spftree=0x55dfa9474440) at ../isisd/isis_spf.c:1827
#9 0x000055dfa8057c15 in isis_run_spf_cb (thread=0x7ffce66c38e0) at ../isisd/isis_spf.c:1889
#10 0x00007f30973bbf04 in thread_call (thread=0x7ffce66c38e0) at ../lib/thread.c:1990
#11 0x00007f309735497b in frr_run (master=0x55dfa91733c0) at ../lib/libfrr.c:1198
#12 0x000055dfa8029d5d in main (argc=5, argv=0x7ffce66c3b08, envp=0x7ffce66c3b38) at ../isisd/isis_main.c:273
(gdb) f 3
#3 0x000055dfa805512b in isis_spf_process_lsp (spftree=0x55dfa950eee0, lsp=0x55dfa94cb590, cost=10, depth=1, root_sysid=0x55dfa950ef6c "", parent=0x55dfa952fca0)
at ../isisd/isis_spf.c:898
898 ../isisd/isis_spf.c: No such file or directory.
(gdb) p te_neighs
$1 = (struct isis_item_list *) 0x120
(gdb) p lsp->tlvs
$2 = (struct isis_tlvs *) 0x0
(gdb) p lsp->hdr
$3 = {pdu_len = 27, rem_lifetime = 0, lsp_id = "\000\000\000\000\000\001\000\001", seqno = 4, checksum = 59918, lsp_bits = 1 '\001'}
The backtrace provided above pertains to version 8.5.4, but it seems that the same issue exists in the code of the master branch as well.
I have reviewed the process for calculating the SPT based on the LSP, and isis_spf_process_lsp() is the only function that does not check whether the TLVs in the fragments are empty. Therefore, I believe that modifying this function alone should be sufficient. If the TLVs of the current fragment are already empty, we do not need to continue processing subsequent fragments. This is consistent with the behavior where we do not process fragments if the TLVs of the first fragment are empty.
Of course, one could argue that lsp_purge() should still retain the TLV memory, freeing it and then reallocating it if needed. However, this is a debatable point because in some scenarios, it is permissible for the LSP to have empty TLVs. For example, after receiving an SNP (Sequence Number PDU) message, an empty LSP (with lsp->hdr.seqno = 0) might be created by calling lsp_new. If the corresponding LSP message is discarded due to domain or area authentication failure, the TLV memory wouldn't be allocated.
Test scenario:
In an LFA network, importing a sufficient number of static routes to cause LSP fragmentation, and then rolling back the imported static routes so that the LSP is no longer fragmented, can easily result in this issue.
Use `vtysh` with this input file:
```
ip route A nh1
ip route A nh2
ip route B nh1
ip route B nh2
```
When running "ip route B" with "nh1" and "nh2", the procedure maybe is:
1) Create the two nexthops: "nh1" and "nh2".
2) Register "nh1" with `static_zebra_nht_register()`, then the states of both
"nh1" and "nht2" are set to "STATIC_SENT_TO_ZEBRA".
3) Register "nh2" with `static_zebra_nht_register()`, then only the routes with
nexthop of "STATIC_START" will be sent to zebra.
So, send the routes with the nexthop of "STATIC_SENT_TO_ZEBRA" to zebra.
anlan_cs [Sat, 15 Jun 2024 12:34:20 +0000 (20:34 +0800)]
ldpd: fix wrong gtsm count
In linux networking stack, the received mpls packets will be processed
by the host *twice*, one as mpls packet, the other as ip packet, so
its ttl decreased 1.
So, we need release the `IP_MINTTL` value if gtsm is enabled, it is for the
mpls packets of neighbor session caused by the command:
`label local advertise explicit-null`.
This change makes the gtsm mechanism a bit deviation.
Donatas Abraitis [Thu, 13 Jun 2024 06:00:21 +0000 (09:00 +0300)]
bgpd: Check if we have real stream data for tunnel encapsulation sub-tlvs
When the packet is malformed it can use whatever values it wants. Let's check
what the real data we have in a stream instead of relying on malformed values.
bgpd: Get 1 or 2 octets for Sub-TLV length (Tunnel Encap attr)
The total number of octets of the Sub-TLV Value field. The Sub-TLV Length field
contains 1 octet if the Sub-TLV Type field contains a value in the range from
0-127. The Sub-TLV Length field contains two octets if the Sub-TLV Type field
contains a value in the range from 128-255.
bgpd
"default-originate" shouldn't withdraw non-default routes
Arrange peer notification to after zebra announce
Convert the bgp_advertise_attr->adv to a fifo
Ensure community data is freed in some cases.
Ensure that the correct aspath is free'd
Fix `match peer` when switching between ipv4/ipv6/interface
Fix display when using `missing-as-worst`
Fix error handling when receiving bgp prefix sid attribute
Fix format overflow for graceful-restart debug logs
Fix route-map match probability deconfiguration callback
Fix srv6 memory leak detection
Include unsuppress-map as a valid outgoing policy
Note when receiving but not understanding a route notification
Prevent from one more cve triggering this place
Set correct ttl for the dynamic neighbor peers
Update default-originate route-map actual map structure
doc
Add param range for graceful-restart helper supported-grace-time
isisd
Fix dislaying lsp id
Fix heap-after-free with prefix sid
Fix ip/ipv6 reachability tlvs
lib
Check for not being a blackhole route
Do not convert evpn prefixes into ipv4/ipv6 if not needed
Replace deprecated ares_gethostbyname
Replace deprecated ares_process()
nhrpd
Fix nhrp_peer leak
Fix race condition
ospf6d
Ospfv3 route change comparision fixed for asbr-only change
Prevent heap-buffer-overflow with unknown type
ospfd
Add support for "no router-info [<area|as>] command"
Can not delete "segment-routing node-msd" when sr if off
Correct lsa parser which fulfill the ted
Correct opaque lsa extended parser
Correct sid check size
Fix ospf dead-interval minimal hello-multiplier param range
Fix the bug where ip_ospf_dead-interval_minimal_hello-multiplier did not reset hello timer
Protect call to get_edge() in ospf_te.c
Solved crash in ospf te parsing
Solved crash in ri parsing with ospf te
pbrd
Fix map seq installed flag in json
Fix pbr handling for last rule deletion
pimd
Fix crash unconfiguring rp keepalive timer
Fix crash when configuring ssmpingd
Fix dr-priority range
Fix null register before aging out reg-stop
Fix order of operations for evaluating join
Re-evaluated s,g oils upon rp changes and for empty sg upstream oils
Fix crash when mixing ssm/any-source joins
staticd
Fix changing to source auto in bfd monitor
tests
Check for 0.0.0.0/1 in bgp_default_route
Update ospf te topotests
tools
Always append "exit" in frr-reload.py
Apply black formatting for tools/frr-reload.py
Fix frr-reload multiple no description cmds
Fix key chain reload removal
Fix ospf area stub summary in frr-reload
Fix pim interface config deletion
Use error log level when failing to execute commands via frr-reload.py
topotests
Redispatch tests in bfd_topo3
Test wrong bfd source in bfd_topo3
vtysh
Show `ip ospf network ...` even if it's not the same as the interface type
zebra
Add missing whitespace when printing route entry status
Deny the routes if ip protocol cli refers to an undefined rmap
Fix crash if macvlan link in another netns
Fix crash on macvlan link down/up
Fix nhg out of sync between zebra and kernel
The dplane_fpm_nl return path leaks memory
Keelan10 [Thu, 12 Oct 2023 14:04:52 +0000 (18:04 +0400)]
nhrpd: Fix nhrp_peer leak
- Addressed memory leak by removing `&c->peer_notifier` from the notifier list on termination. Retaining it caused the notifier list to stay active, preventing the deletion of `c->cur.peer`
thereby causing a memory leak.
- Reordered termination steps to call `vrf_terminate` before `nhrp_vc_terminate`, preventing a heap-use-after-free issue when `nhrp_vc_notify_del` is invoked in `nhrp_peer_check_delete`.
- Added an if statement to avoid passing NULL as hash to `hash_release`, which leads to a SIGSEGV.
The ASan leak log for reference:
```
***********************************************************************************
Address Sanitizer Error detected in nhrp_topo.test_nhrp_topo/r1.asan.nhrpd.20265
Direct leak of 112 byte(s) in 1 object(s) allocated from:
#0 0x7f80270c9b40 in __interceptor_malloc (/usr/lib/x86_64-linux-gnu/libasan.so.4+0xdeb40)
#1 0x7f8026ac1eb8 in qmalloc lib/memory.c:100
#2 0x560fd648f0a6 in nhrp_peer_create nhrpd/nhrp_peer.c:175
#3 0x7f8026a88d3f in hash_get lib/hash.c:147
#4 0x560fd6490a5d in nhrp_peer_get nhrpd/nhrp_peer.c:228
#5 0x560fd648a51a in nhrp_nhs_resolve_cb nhrpd/nhrp_nhs.c:297
#6 0x7f80266b000f in resolver_cb_literal lib/resolver.c:234
#7 0x7f8026b62e0e in event_call lib/event.c:1969
#8 0x7f8026aa5437 in frr_run lib/libfrr.c:1213
#9 0x560fd6488b4f in main nhrpd/nhrp_main.c:166
#10 0x7f8025eb2c86 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x21c86)
SUMMARY: AddressSanitizer: 112 byte(s) leaked in 1 allocation(s).
***********************************************************************************
***********************************************************************************
Address Sanitizer Error detected in nhrp_topo.test_nhrp_topo/r2.asan.nhrpd.20400
Direct leak of 112 byte(s) in 1 object(s) allocated from:
#0 0x7fb6e3ca5b40 in __interceptor_malloc (/usr/lib/x86_64-linux-gnu/libasan.so.4+0xdeb40)
#1 0x7fb6e369deb8 in qmalloc lib/memory.c:100
#2 0x562652de40a6 in nhrp_peer_create nhrpd/nhrp_peer.c:175
#3 0x7fb6e3664d3f in hash_get lib/hash.c:147
#4 0x562652de5a5d in nhrp_peer_get nhrpd/nhrp_peer.c:228
#5 0x562652de1e8e in nhrp_packet_recvraw nhrpd/nhrp_packet.c:325
#6 0x7fb6e373ee0e in event_call lib/event.c:1969
#7 0x7fb6e3681437 in frr_run lib/libfrr.c:1213
#8 0x562652dddb4f in main nhrpd/nhrp_main.c:166
#9 0x7fb6e2a8ec86 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x21c86)
SUMMARY: AddressSanitizer: 112 byte(s) leaked in 1 allocation(s).
***********************************************************************************
```
David Lamparter [Sat, 16 Sep 2023 12:17:24 +0000 (14:17 +0200)]
ospf6d: fix uninitialized warnings
GCC 13.2.0 complains:
```
ospf6d/ospf6_intra.c:139:25: error: ‘json_arr’ may be used uninitialized [-Werror=maybe-uninitialized]
ospf6d/ospf6_intra.c:485:20: error: ‘json_arr’ may be used uninitialized [-Werror=maybe-uninitialized]
```
Iggy Frankovic [Thu, 30 May 2024 11:59:54 +0000 (07:59 -0400)]
ospf6d: Prevent heap-buffer-overflow with unknown type
When parsing a osf6 grace lsa field and we receive an
unknown tlv type, ospf6d was not incrementing the pointer
to get beyond the tlv. Leaving a situation where ospf6d
would parse the packet incorrectly.
There is no reason to call `igmp_anysource_forward_stop()` inside a call to
`igmp_get_source_by_addr()`; not only it is not expected for a "get" function
to perform such an action, but also the decision to start/stop forwarding is
already handled correctly by pim outside `igmp_get_source_by_addr()`.
That call was left there from the days pim was initially imported into the sources.
The problem/crash was happening because `igmp_find_source_by_addr()` would fail to
find the group/source combo when mixing `(*, G)` and `(S, G)`. When having an existing
flow `(*, G)`, and a new `(S, G)` igmp is received, a new entry is correctly created.
`igmp_anysource_forward_stop(group)` always stops and eventually frees `(*, G)`, even
when the new igmp is `(S, G)`, leaving a bad state. I.e, the new entry for `(S, G)`
causes `(*, G)` to be deleted.
Tested the fix with multiple receivers on the same interface with several ssm and
any source senders and receivers with various combination of start/stop orders and
they all worked correctly.
Donatas Abraitis [Tue, 13 Jun 2023 13:08:24 +0000 (16:08 +0300)]
bgpd: Use enum bgp_create_error_code as argument in header
```
bgpd/bgp_vty.c:865:5: warning: conflicting types for ‘bgp_vty_return’ due to enum/integer mismatch; have ‘int(struct vty *, enum bgp_create_error_code)’ [-Wenum-int-mismatch]
865 | int bgp_vty_return(struct vty *vty, enum bgp_create_error_code ret)
| ^~~~~~~~~~~~~~
In file included from ./bgpd/bgp_mplsvpn.h:15,
from bgpd/bgp_vty.c:48:
./bgpd/bgp_vty.h:148:12: note: previous declaration of ‘bgp_vty_return’ with type ‘int(struct vty *, int)’
148 | extern int bgp_vty_return(struct vty *vty, int ret);
| ^~~~~~~~~~~~~~
```
Donatas Abraitis [Tue, 13 Jun 2023 13:01:40 +0000 (16:01 +0300)]
bgpd: Use enum bgp_fsm_state_progress for bgp_stop()
```
bgpd/bgp_fsm.c:1360:29: warning: conflicting types for ‘bgp_stop’ due to enum/integer mismatch; have ‘enum bgp_fsm_state_progress(struct peer *)’ [-Wenum-int-mismatch]
1360 | enum bgp_fsm_state_progress bgp_stop(struct peer *peer)
| ^~~~~~~~
In file included from bgpd/bgp_fsm.c:29:
./bgpd/bgp_fsm.h:111:12: note: previous declaration of ‘bgp_stop’ with type ‘int(struct peer *)’
111 | extern int bgp_stop(struct peer *peer);
| ^~~~~~~~
```
Acee [Tue, 28 May 2024 14:02:27 +0000 (10:02 -0400)]
ospf6d: OSPFv3 route change comparision fixed for ASBR-only change
When a router route already exists in the area border routers table
as an ABR and it solely changes its ABR or ASBR status, the change
was missed and border route is not updated. This fixes the comparison
for the router_bits in the ospf6_path structure.
This fixes issue https://github.com/FRRouting/frr/issues/16053 although
the actual problem is not the computing router (r2) and not the OSPFv3
redistribution (r3).
During fuzzing, Iggy Frankovic discovered that get_edge() function in ospf_te.c
could return null pointer, in particular when the link_id or advertised router
IP addresses are fuzzed. As the null pointer returned by get_edge() function is
not handlei by calling functions, this could cause ospfd crash.
This patch introduces new verification of returned pointer by get_edge()
function and stop the processing in case of null pointer. In addition, link ID
and advertiser router ID are validated before calling ls_find_edge_by_key() to
avoid the creation of a new edge with an invalid key.
Iggy Frankovic discovered another ospfd crash when performing fuzzing of OSPF
LSA packets. The crash occurs in ospf_te_parse_ext_link() function when
attemping to read Segment Routing Adjacency SID subTLVs. The original code
doesn't check if the size of the Extended Link TLVs and subTLVs have the correct
length. In presence of erronous LSA, this will cause a buffer overflow and ospfd
crashes.
This patch introduces new verification of the subTLVs size for Extended Link
TLVs and subTLVs. Similar check has been also introduced for the Extended
Prefix TLV.
Iggy Frankovic discovered another ospfd crash when performing fuzzing of OSPF
LSA packets. The crash occurs in ospf_te_parse_ri() function when attemping to
read Segment Routing subTLVs. The original code doesn't check if the size of
the SR subTLVs have the correct length. In presence of erronous LSA, this will
cause a buffer overflow and ospfd crash.
This patch introduces new verification of the subTLVs size for Router
Information TLV.
Louis Scalbert [Thu, 16 May 2024 14:44:03 +0000 (16:44 +0200)]
isisd: fix heap-after-free with prefix sid
> ==2334217==ERROR: AddressSanitizer: heap-use-after-free on address 0x61000001d0a0 at pc 0x563828c8de6f bp 0x7fffbdaee560 sp 0x7fffbdaee558
> READ of size 1 at 0x61000001d0a0 thread T0
> #0 0x563828c8de6e in prefix_sid_cmp isisd/isis_spf.c:187
> #1 0x7f84b8204f71 in hash_get lib/hash.c:142
> #2 0x7f84b82055ec in hash_lookup lib/hash.c:184
> #3 0x563828c8e185 in isis_spf_prefix_sid_lookup isisd/isis_spf.c:209
> #4 0x563828c90642 in isis_spf_add2tent isisd/isis_spf.c:598
> #5 0x563828c91cd0 in process_N isisd/isis_spf.c:824
> #6 0x563828c93852 in isis_spf_process_lsp isisd/isis_spf.c:1041
> #7 0x563828c98dde in isis_spf_loop isisd/isis_spf.c:1821
> #8 0x563828c998de in isis_run_spf isisd/isis_spf.c:1983
> #9 0x563828c99c7b in isis_run_spf_with_protection isisd/isis_spf.c:2009
> #10 0x563828c9a60d in isis_run_spf_cb isisd/isis_spf.c:2090
> #11 0x7f84b835c72d in event_call lib/event.c:2011
> #12 0x7f84b8236d93 in frr_run lib/libfrr.c:1217
> #13 0x563828c21918 in main isisd/isis_main.c:346
> #14 0x7f84b7e4fd09 in __libc_start_main ../csu/libc-start.c:308
> #15 0x563828c20df9 in _start (/usr/lib/frr/isisd+0xf5df9)
>
> 0x61000001d0a0 is located 96 bytes inside of 184-byte region [0x61000001d040,0x61000001d0f8)
> freed by thread T0 here:
> #0 0x7f84b88a9b6f in __interceptor_free ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:123
> #1 0x7f84b8263bae in qfree lib/memory.c:130
> #2 0x563828c8e433 in isis_vertex_del isisd/isis_spf.c:249
> #3 0x563828c91c95 in process_N isisd/isis_spf.c:811
> #4 0x563828c93852 in isis_spf_process_lsp isisd/isis_spf.c:1041
> #5 0x563828c98dde in isis_spf_loop isisd/isis_spf.c:1821
> #6 0x563828c998de in isis_run_spf isisd/isis_spf.c:1983
> #7 0x563828c99c7b in isis_run_spf_with_protection isisd/isis_spf.c:2009
> #8 0x563828c9a60d in isis_run_spf_cb isisd/isis_spf.c:2090
> #9 0x7f84b835c72d in event_call lib/event.c:2011
> #10 0x7f84b8236d93 in frr_run lib/libfrr.c:1217
> #11 0x563828c21918 in main isisd/isis_main.c:346
> #12 0x7f84b7e4fd09 in __libc_start_main ../csu/libc-start.c:308
>
> previously allocated by thread T0 here:
> #0 0x7f84b88aa037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154
> #1 0x7f84b8263a6c in qcalloc lib/memory.c:105
> #2 0x563828c8e262 in isis_vertex_new isisd/isis_spf.c:225
> #3 0x563828c904db in isis_spf_add2tent isisd/isis_spf.c:588
> #4 0x563828c91cd0 in process_N isisd/isis_spf.c:824
> #5 0x563828c93852 in isis_spf_process_lsp isisd/isis_spf.c:1041
> #6 0x563828c98dde in isis_spf_loop isisd/isis_spf.c:1821
> #7 0x563828c998de in isis_run_spf isisd/isis_spf.c:1983
> #8 0x563828c99c7b in isis_run_spf_with_protection isisd/isis_spf.c:2009
> #9 0x563828c9a60d in isis_run_spf_cb isisd/isis_spf.c:2090
> #10 0x7f84b835c72d in event_call lib/event.c:2011
> #11 0x7f84b8236d93 in frr_run lib/libfrr.c:1217
> #12 0x563828c21918 in main isisd/isis_main.c:346
> #13 0x7f84b7e4fd09 in __libc_start_main ../csu/libc-start.c:308
>
> SUMMARY: AddressSanitizer: heap-use-after-free isisd/isis_spf.c:187 in prefix_sid_cmp
> Shadow bytes around the buggy address:
> 0x0c207fffb9c0: fa fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00
> 0x0c207fffb9d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fa
> 0x0c207fffb9e0: fa fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00
> 0x0c207fffb9f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fa
> 0x0c207fffba00: fa fa fa fa fa fa fa fa fd fd fd fd fd fd fd fd
> =>0x0c207fffba10: fd fd fd fd[fd]fd fd fd fd fd fd fd fd fd fd fa
> 0x0c207fffba20: fa fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00
> 0x0c207fffba30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fa
> 0x0c207fffba40: fa fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00
> 0x0c207fffba50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fa
> 0x0c207fffba60: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
> Shadow byte legend (one shadow byte represents 8 application bytes):
> Addressable: 00
> Partially addressable: 01 02 03 04 05 06 07
> Heap left redzone: fa
> Freed heap region: fd
> Stack left redzone: f1
> Stack mid redzone: f2
> Stack right redzone: f3
> Stack after return: f5
> Stack use after scope: f8
> Global redzone: f9
> Global init order: f6
> Poisoned by user: f7
> Container overflow: fc
> Array cookie: ac
> Intra object redzone: bb
> ASan internal: fe
> Left alloca redzone: ca
> Right alloca redzone: cb
> Shadow gap: cc
> ==2334217==ABORTING
Fixes: 2f7cc7bcd3 ("isisd: detect Prefix-SID collisions and handle them appropriately") Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
(cherry picked from commit e697de58431474cdb06eff79bcbc70de4215e222)
zebra: Deny the routes if ip protocol CLI refers to an undefined rmap
Currently zebra does not deny the routes if `ip protocol <proto> route-map
FOO`
commmand is configured with reference to an undefined route-map (FOO in
this case).
However, on FRR restart, in zebra_route_map_check() routes get denied
if route-map name is available but the route-map is not defined. This
change was introduced in fd303a4ba14c762550db972317e1e88528768005.
Fix:
When `ip protocol <proto> route-map FOO` CLI is configured with reference to an
undefined route-map FOO, let the processing in ip_protocol_rm_add() and
ip_protocol_rm_del() go through so that zebra can deny the routes instead
of simply returning. This will result in consistent behavior.
Testing Done:
Before fix:
```
spine-1# configure
spine-1(config)# ip protocol bgp route-map rmap7
spine-1(config)# do show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, A - Babel, D - SHARP, F - PBR, f - OpenFabric,
Z - FRR,
> - selected route, * - FIB route, q - queued, r - rejected, b - backup
t - trapped, o - offload failure
C>* 27.0.0.1/32 is directly connected, lo, 02:27:45
B>* 27.0.0.3/32 [20/0] via fe80::202:ff:fe00:21, downlink_1, weight 1, 02:27:35
B>* 27.0.0.4/32 [20/0] via fe80::202:ff:fe00:29, downlink_2, weight 1, 02:27:40
B>* 27.0.0.5/32 [20/0] via fe80::202:ff:fe00:31, downlink_3, weight 1, 02:27:40
B>* 27.0.0.6/32 [20/0] via fe80::202:ff:fe00:39, downlink_4, weight 1, 02:27:40
```
After fix:
```
spine-1(config)# ip protocol bgp route-map route-map67
spine-1(config)# do show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, A - Babel, D - SHARP, F - PBR, f - OpenFabric,
Z - FRR,
> - selected route, * - FIB route, q - queued, r - rejected, b - backup
t - trapped, o - offload failure
C>* 27.0.0.1/32 is directly connected, lo, 00:35:03
B 27.0.0.3/32 [20/0] via fe80::202:ff:fe00:21, downlink_1 inactive, weight 1, 00:34:58
B 27.0.0.4/32 [20/0] via fe80::202:ff:fe00:29, downlink_2 inactive, weight 1, 00:34:57
B 27.0.0.5/32 [20/0] via fe80::202:ff:fe00:31, downlink_3 inactive, weight 1, 00:34:57
B 27.0.0.6/32 [20/0] via fe80::202:ff:fe00:39, downlink_4 inactive, weight 1, 00:34:58
spine-1(config)#
root@spine-1:mgmt:/var/home/cumulus# ip route show
root@spine-1:mgmt:/var/home/cumulus#
```
Igor Ryzhov [Mon, 1 Apr 2024 21:56:17 +0000 (00:56 +0300)]
isisd: fix ip/ipv6 reachability tlvs
Don't allocate subtlvs container if there's nothing to add to it. If the
container is allocated, the "sub-TLVs presence" bit is set in the TLVs
even if there's no actual sub-TLVs, what violates the RFC.
David Lamparter [Mon, 12 Dec 2022 16:50:59 +0000 (17:50 +0100)]
pimd: fix order of operations for evaluating join
join_desired looks at whether up->channel_oil is empty. up->channel_oil
is updated from pim_forward_stop(), calling pim_channel_del_oif(). But
that was being called *after* updating join_desired, so join_desired saw
a non-empty OIL. Pull up the pim_forward_stop() call to before updating
join_desired.
David Lamparter [Mon, 17 Apr 2023 09:47:08 +0000 (11:47 +0200)]
pimd: fix null register before aging out reg-stop
It looks like the code was trying to do this with the null_register
parameter on pim_upstream_start_register_stop_timer(), but that didn't
quite work right. Restructure a bit to get it right.
pimd crashs while unconfigure of rp ka timer as we are trying to access
a yand dnode(suppress timer) which does not exist at the moment.
User just configured rp keepalive timer and not suppress timer,
the yang dnode would not be present. Instead of directly accessing
yang_dnode_get_unit16, first check the yang node exist using
the xpath.
Before:
------
tor-11(config)# no ip pim rp keep-alive-timer 3000
vtysh: error reading from pimd: Success (0)Warning: closing connection to pimd because of an I/O error!
Broadcast message from root@tor-11 (somewhere) (Mon Apr 22 17:29:12 2024):
cumulus-core: Running cl-support for core files "pimd.25467.1713806952.core"
After:
-----
tor-11(config)# no ip pim rp keep-alive-timer 3000
tor-11(config)#
Signed-off-by: Donald Sharp <sharpd@nvidia.com> Signed-off-by: Vijayalaxmi Basavaraj <vbasavaraj@nvidia.com>
(cherry picked from commit 0c4b7c1f1f359c1d7647fea34f62378af8b640a5)
Donald Sharp [Fri, 19 Apr 2024 16:13:32 +0000 (12:13 -0400)]
lib, zebra: Check for not being a blackhole route
In zebra_interface_nhg_reinstall zebra is checking that the
nhg is a singleton and not a blackhole nhg. This was originally
done with checking that the nexthop is a NEXTHOP_TYPE_IFINDEX,
NEXTHOP_TYPE_IPV4_IFINDEX and NEXTHOP_TYPE_IPV6_IFINDEX. This
was excluding NEXTHOP_TYPE_IPV4 and NEXTHOP_TYPE_IPV6. These
were both possible to be received and maintained from the upper
level protocol for when a route is being recursively resolved.
If we have gotten to this point in zebra_interface_nhg_reinstall
the nexthop group has already been installed at least once
and we *know* that it is actually a valid nexthop. What the
test is really trying to do is ensure that we are not reinstalling
a blackhole nexthop group( Which is not possible to even be
here by the way, but safety first! ). So let's change
to test for that instead.
Donald Sharp [Thu, 11 Apr 2024 14:46:46 +0000 (10:46 -0400)]
bgpd: Fix display when using `missing-as-worst`
The usage of the `bgp bestpath med missing-as-worst` command
was being accepted and applied during bestpath, but during output
of the routes affected by this it would not give any indication
that this was happening or what med value was being used.
Donald Sharp [Thu, 28 Mar 2024 16:27:38 +0000 (12:27 -0400)]
bgpd: Arrange peer notification to after zebra announce
Currently BGP attempts to send route change information
to it's peers *before* the route is installed into zebra.
This creates a bug in suppress-fib-pending in the following
scenario:
a) bgp suppress-fib-pending and bgp has a route with
2 way ecmp.
b) bgp receives a route withdraw from peer 1. BGP
will send the route to zebra and mark the route as
FIB_INSTALL_PENDING.
c) bgp receives a route withdraw from peer 2. BGP
will see the route has the FIB_INSTALL_PENDING and
not send the withdrawal of the route to the peer.
bgp will then send the route deletion to zebra and
clean up the bgp_path_info's.
At this point BGP is stuck where it has not sent
a route withdrawal to downstream peers.
Let's modify the code in bgp_process_main_one to
send the route notification to zebra first before
attempting to announce the route. The route withdrawal
will remove the FIB_INSTALL_PENDING flag from the dest
and this will allow group_announce_route to believe
it can send the route withdrawal.
For the master branch this is ok because the recent
backpressure commits are in place and nothing is going
to change from an ordering perspective in that regards.
Ostensibly this fix is also for operators of Sonic and
will be backported to the 8.5 branch as well. This will
change the order of the send to peers to be after the
zebra installation but sonic users are using suppress-fib-pending
anyways so updates won't go out until rib ack has been
received anyways.
Donald Sharp [Thu, 28 Mar 2024 16:25:05 +0000 (12:25 -0400)]
bgpd: Note when receiving but not understanding a route notification
When BGP has been asked to wait for FIB installation, on route
removal a return call is likely to not have the dest since BGP
will have cleaned up the node, entirely. Let's just note that
the prefix cannot be found if debugs are turned on and move on.
Donatas Abraitis [Wed, 27 Mar 2024 17:08:38 +0000 (19:08 +0200)]
bgpd: Prevent from one more CVE triggering this place
If we receive an attribute that is handled by bgp_attr_malformed(), use
treat-as-withdraw behavior for unknown (or missing to add - if new) attributes.
Donatas Abraitis [Wed, 27 Mar 2024 16:42:56 +0000 (18:42 +0200)]
bgpd: Fix error handling when receiving BGP Prefix SID attribute
Without this patch, we always set the BGP Prefix SID attribute flag without
checking if it's malformed or not. RFC8669 says that this attribute MUST be discarded.
Also, this fixes the bgpd crash when a malformed Prefix SID attribute is received,
with malformed transitive flags and/or TLVs.
projects / mirror / frr.git / log