Trey Aspelund [Wed, 26 Oct 2022 20:53:09 +0000 (20:53 +0000)]
bgpd: Check for IP-format Site-of-Origin
When deciding whether to apply "neighbor soo" filtering towards a peer,
we were only looking for SoO ecoms that use either AS or AS4 encoding.
This makes sure we also check for IPv4 encoding, since we allow a user
to configure that encoding style against the peer.
Config:
```
router bgp 1
address-family ipv4 unicast
network 100.64.0.2/32 route-map soo-foo
neighbor 192.168.122.12 soo 3.3.3.3:20
exit-address-family
!
route-map soo-foo permit 10
set extcommunity soo 3.3.3.3:20
exit
```
Before:
```
ub20# show ip bgp neighbors 192.168.122.12 advertised-routes
BGP table version is 5, local router ID is 100.64.0.222, vrf id 0
Default local pref 100, local AS 1
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
Network Next Hop Metric LocPrf Weight Path
*> 2.2.2.2/32 0.0.0.0 0 100 32768 i
*> 100.64.0.2/32 0.0.0.0 0 100 32768 i
Total number of prefixes 2
```
After:
```
ub20# show ip bgp neighbors 192.168.122.12 advertised-routes
BGP table version is 5, local router ID is 100.64.0.222, vrf id 0
Default local pref 100, local AS 1
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
Network Next Hop Metric LocPrf Weight Path
*> 2.2.2.2/32 0.0.0.0 0 100 32768 i
Manoj Naragund [Tue, 25 Oct 2022 07:43:10 +0000 (00:43 -0700)]
ospf6d: Fix for memory leak issues in ospf6.
Problem:
Multiple memory leaks in ospf6.
260 ==6637== 32 bytes in 1 blocks are definitely lost in loss record 5 of 24
261 ==6637== at 0x4C31FAC: calloc (vg_replace_malloc.c:762)
262 ==6637== by 0x4E8A1BF: qcalloc (memory.c:111)
263 ==6637== by 0x11EE27: ospf6_summary_add_aggr_route_and_blackhole (ospf6_asbr.c:2779)
264 ==6637== by 0x11EEBA: ospf6_originate_new_aggr_lsa (ospf6_asbr.c:2811)
265 ==6637== by 0x4E7C6A7: hash_clean (hash.c:325)
266 ==6637== by 0x11FA93: ospf6_handle_external_aggr_update (ospf6_asbr.c:3164)
267 ==6637== by 0x11FA93: ospf6_asbr_summary_process (ospf6_asbr.c:3386)
268 ==6637== by 0x4EB739B: thread_call (thread.c:1692)
269 ==6637== by 0x4E85B17: frr_run (libfrr.c:1068)
270 ==6637== by 0x119535: main (ospf6_main.c:228)
356 ==6637== 240 bytes in 12 blocks are indirectly lost in loss record 13 of 24
357 ==6637== at 0x4C2FE96: malloc (vg_replace_malloc.c:309)
358 ==6637== by 0x4E8A0DA: qmalloc (memory.c:106)
359 ==6637== by 0x13545C: ospf6_lsa_alloc (ospf6_lsa.c:724)
360 ==6637== by 0x1354E3: ospf6_lsa_create_headeronly (ospf6_lsa.c:756)
361 ==6637== by 0x1355F2: ospf6_lsa_copy (ospf6_lsa.c:790)
362 ==6637== by 0x13B58B: ospf6_dbdesc_recv_slave (ospf6_message.c:976)
363 ==6637== by 0x13B58B: ospf6_dbdesc_recv (ospf6_message.c:1038)
364 ==6637== by 0x13B58B: ospf6_read_helper (ospf6_message.c:1838)
365 ==6637== by 0x13B58B: ospf6_receive (ospf6_message.c:1875)
366 ==6637== by 0x4EB739B: thread_call (thread.c:1692)
367 ==6637== by 0x4E85B17: frr_run (libfrr.c:1068)
368 ==6637== by 0x119535: main (ospf6_main.c:228)
RCA:
1. when the ospf6 area is being deleted, the neighbor related information
was not being cleaned up.
2. when aggr route gets deleted from rt_aggr_tbl the corrsponding summary
route attched to the aggr route was not being deleted.
Fix:
Added the ospf6_neighbor_delete in ospf6_area_delete to free the
neighbor related information and added ospf6_route_delete while
freeing external aggr route to free the summary route.
Lou Berger [Fri, 21 Oct 2022 20:35:13 +0000 (20:35 +0000)]
ospf: optimization for FRR's P2MP mode
FRR implements a non-standard, but compatible approach for
sending update LSAs (it always send to 224.0.0.5) on P2MP
interfaces. This change makes it so acks are also sent to
224.0.0.5.
Since the acks are multicast, this allows an optimization
where we don't send back out the incoming P2MP interface
immediately allow time to rx multicast ack from neighbors
on the same net that rx'ed the original (multicast) update.
Sarita Patra [Tue, 11 Oct 2022 01:38:14 +0000 (18:38 -0700)]
pimd, pim6d: Don't configure link-local, Multicast, Unspecified address as RP
Problem:
=======
frr(config)# do show ipv6 pim interface
Interface State Address PIM Nbrs PIM DR FHR IfChannels
ens192 up fe80::250:56ff:feb7:3619 0 local 0 1
Configure ens192 interface link-local address as RP.
frr(config)# ipv6 pim rp fe80::250:56ff:feb7:3619
No Path to RP address specified: fe80::250:56ff:feb7:3619
frr(config)# do show ipv6 pim rp-info
RP address group/prefix-list OIF I am RP Source Group-Type
fe80::250:56ff:feb7:3619 ff00::/8 Unknown yes Static ASM
Fix:
===
RP should not be link-local, multicast and unspecified address.
Donald Sharp [Wed, 19 Oct 2022 16:57:28 +0000 (12:57 -0400)]
lib: Remove unnecessary comparison, for linked list
In the comparison function for a linked list code was
always checking against passed in NULL's. The comparison
function will never receive a NULL value for data from
the linklist.c code.
Donald Sharp [Wed, 19 Oct 2022 16:44:55 +0000 (12:44 -0400)]
zebra: Fix debug of filtering out prefix due to routemap
The debug for notification about a filtered prefix was
just printing the nexthop ifindex and vrf id. Not all
nexthops have this data. Just print out the actual nexthop
Donald Sharp [Wed, 12 Oct 2022 18:53:21 +0000 (14:53 -0400)]
bgpd: Allow `network XXX` to work with bgp suppress-fib-pending
When bgp is using `bgp suppress-fib-pending` and the end
operator is using network statements, bgp was not sending
the network'ed prefix'es to it's peers. Fix this.
Also update the test cases for bgp_suppress_fib to test
this new corner case( I am sure that there are going to
be others that will need to be added ).
Donald Sharp [Tue, 11 Oct 2022 17:21:03 +0000 (13:21 -0400)]
lib: Free some memory in scripting subsystem at shutdown
Pre:
staticd: showing active allocations in memory group libfrr
staticd: memstats: Scripting : 16 * (variably sized)
staticd: memstats: Hash : 2 * (variably sized)
staticd: memstats: Hash Bucket : 8 * 32
staticd: memstats: Hash Index : 1 * (variably sized)
staticd: memstats: Link List : 1 * 40
staticd: memstats: Link Node : 1 * 24
staticd: showing active allocations in memory group logging subsystem
staticd: memstats: log file target : 1 * 88
staticd: showing active allocations in memory group staticd
Post:
staticd: showing active allocations in memory group libfrr
staticd: showing active allocations in memory group logging subsystem
staticd: memstats: log file target : 1 * 88
staticd: showing active allocations in memory group staticd
Donatas Abraitis [Tue, 11 Oct 2022 19:36:26 +0000 (22:36 +0300)]
tools: Handle sequence numbers for BGP community (large/ext) in frr-reload.py
If we add/modify community/large/ext lists without sequence numbers, and
doing frr-reload.py, then rules with sequence numbers (show running-config
always adds sequence numbers) will be deleted and new ones will be re-added.
Donald Sharp [Wed, 20 Jul 2022 20:43:17 +0000 (16:43 -0400)]
ospfclient: Ensure ospf_apiclient_lsa_originate cannot accidently write into stack
Even though OSPF_MAX_LSA_SIZE is quite large and holds the upper bound
on what can be written into a lsa, let's add a small check to ensure
it is not possible to do a bad thing.
This wins one of the long standing bug awards. 2003!
Donald Sharp [Tue, 4 Oct 2022 12:51:38 +0000 (08:51 -0400)]
zebra: Allow tunneldump data to work properly on non-supported kernels
When zebra requests tunnel data it is sending a RTM_GETTUNNEL per
interface that is a VXLAN tunnel. If the kernel that is being
used does not support the particular request type then zebra
will get a error message per tunnel request back. Unfortunately
netlink_parse_info *stops* reading on the first error message.
Therefor one kernels that are returning an error message
let's gather all of those errors. This will allow things
like route reads to actually work properly
bgpd: BGP does not update next-hop when global V6 address is configured
When primary global v6 unicast address is configured on an
unnumbered interface, BGP does not re-advertise updates out
with the new global v6 address as the nexthop
Donald Sharp [Tue, 4 Oct 2022 11:28:51 +0000 (07:28 -0400)]
fabricd: Turn off excessive logging when peering will not come up
When fabricd is configured to use an interface and there will be
no peers out that interface, the log file is filling up with:
Oct 04 10:50:03 host2 fabricd[1444769]: [HHXDJ-1DA93] ISIS-Adj (1): Threeway state change Initializing to Up
Oct 04 10:50:03 host2 fabricd[1444769]: [R18GA-MS9R7] OpenFabric: Started initial synchronization with 1111.1111.1111 on enp1s0f1np1
Oct 04 10:50:06 host2 fabricd[1444769]: [HHXDJ-1DA93] ISIS-Adj (1): Threeway state change Up to Initializing
Oct 04 10:50:07 host2 fabricd[1444769]: [NT6J7-1RYRF] OpenFabric: Initial synchronization on enp1s0f1np1 timed out!
Oct 04 10:50:07 host2 fabricd[1444769]: [R18GA-MS9R7] OpenFabric: Started initial synchronization with 3333.3333.3333 on enp1s0f0np0
Oct 04 10:50:08 host2 fabricd[1444769]: [HHXDJ-1DA93] ISIS-Adj (1): Threeway state change Up to Initializing
Oct 04 10:50:11 host2 fabricd[1444769]: [NT6J7-1RYRF] OpenFabric: Initial synchronization on enp1s0f0np0 timed out!
Oct 04 10:50:11 host2 fabricd[1444769]: [HHXDJ-1DA93] ISIS-Adj (1): Threeway state change Initializing to Up
Oct 04 10:50:11 host2 fabricd[1444769]: [R18GA-MS9R7] OpenFabric: Started initial synchronization with 1111.1111.1111 on enp1s0f1np1
Oct 04 10:50:14 host2 fabricd[1444769]: [HHXDJ-1DA93] ISIS-Adj (1): Threeway state change Up to Initializing
Oct 04 10:50:15 host2 fabricd[1444769]: [NT6J7-1RYRF] OpenFabric: Initial synchronization on enp1s0f1np1 timed out!
Oct 04 10:50:16 host2 fabricd[1444769]: [R18GA-MS9R7] OpenFabric: Started initial synchronization with 1111.1111.1111 on enp1s0f1np1
Oct 04 10:50:18 host2 fabricd[1444769]: [HHXDJ-1DA93] ISIS-Adj (1): Threeway state change Initializing to Up
The `Threeway state change..` message is guarded by a debug, but the other 2 are not.
Let's guard those with debugs since the log will be filled up rather quickly
with any sort of aggressive timers.
Donald Sharp [Fri, 30 Sep 2022 12:57:43 +0000 (08:57 -0400)]
bgpd: Ensure FRR has enough data to read 2 bytes in bgp_open_option_parse
In bgp_open_option_parse the code is checking that the
stream has at least 2 bytes to read ( the opt_type and
the opt_length). However if BGP_OPEN_EXT_OPT_PARAMS_CAPABLE(peer)
is configured then FRR is reading 3 bytes. Which is not good
since the packet could be badly formateed. Ensure that
FRR has the appropriate data length to read the data.
Donald Sharp [Fri, 30 Sep 2022 12:51:45 +0000 (08:51 -0400)]
bgpd: Ensure FRR has enough data to read 2 bytes in peek_for_as4_capability
In peek_for_as4_capability the code is checking that the
stream has at least 2 bytes to read ( the opt_type and the
opt_length ). However if BGP_OPEN_EXT_OPT_PARAMS_CAPABLE(peer)
is configured then FRR is reading 3 bytes. Which is not good
since the packet could be badly formated. Ensure that
FRR has the appropriate data length to read the data.
```
donatas-pc# sh run | include allow-reserved-ranges
allow-reserved-ranges
allow-reserved-ranges
allow-reserved-ranges
allow-reserved-ranges
allow-reserved-ranges
allow-reserved-ranges
donatas-pc#
```
Donald Sharp [Tue, 27 Sep 2022 16:24:16 +0000 (12:24 -0400)]
pimd: Allow v6 to do non-integrated configuration
Proof:
eva# conf
eva(config)# no service integrated-vtysh-config
eva(config)# end
eva# wr mem
Note: this version of vtysh never writes vtysh.conf
Building Configuration...
Configuration saved to /etc/frr/zebra.conf
Configuration saved to /etc/frr/ripd.conf
Configuration saved to /etc/frr/ripngd.conf
Configuration saved to /etc/frr/ospfd.conf
Configuration saved to /etc/frr/ospf6d.conf
Configuration saved to /etc/frr/bgpd.conf
Configuration saved to /etc/frr/isisd.conf
Configuration saved to /etc/frr/pimd.conf
Configuration saved to /etc/frr/nhrpd.conf
Configuration saved to /etc/frr/eigrpd.conf
Configuration saved to /etc/frr/babeld.conf
Configuration saved to /etc/frr/sharpd.conf
Configuration saved to /etc/frr/fabricd.conf
Configuration saved to /etc/frr/pbrd.conf
Configuration saved to /etc/frr/staticd.conf
Configuration saved to /etc/frr/bfdd.conf
Configuration saved to /etc/frr/vrrpd.conf
Configuration saved to /etc/frr/pim6d.conf
eva#
Fixes: #12011 Signed-off-by: Donald Sharp <sharpd@nvidia.com>
pimd: IGMP Querier election is not correct in LAN scenario
When more than 2 routers are present in LAN and the querier
goes down, the other routers will wait for other querier
present timer to expire to elect a new querier.
This issue will be seen when the router having next lower ip
address expires the other querier present timer first and it
starts sending the query message. Now on the other non-querier
routers it will receive this query and reset its other
querier present timer but the querier is still the old one
and since it is lowest ip, it never gets updated to the newly
elected querier.
Reset the other querier timer only if query is received from
the previously elected querier or a better new querier
This will make sure that non-querier elects the new querier
whose ip address is higher than the old querier
when the old querier goes down via other querier querier
timer expiry
When removing VRF ( all routes of this VRF), zebra mistakenly forgot to check
whether its routes are in update queue of FPM. So FPM module will crash during
its dealing with these routes, which are already freed.
Add a new HOOK `rib_shutdown()`, `zebra_rtable_node_cleanup()` will use it
to remove these routes from update queue of FPM module before freeing them.
Donald Sharp [Fri, 23 Sep 2022 19:16:40 +0000 (15:16 -0400)]
doc: Align docs to recommend integrated config
Docs were recommending both integrated and non-integrated
config in different sections. Remove the recommendation
for non-integrated config from vtysh.rst.
projects / mirror / frr.git / log