- bgpd
- Fix as-path exclude modify crash
- Fix labels static-analyser
- Fix, do not access peer->notify.data when it is null
- Fix crash at no rpki
- Fix memory type for static->prd_pretty
- Revert "topotests: add an ebgp 6vpe test"
- Revert "topotests: add bgp_nexthop_mp_ipv4_6 test"
- Revert "bgpd: optimize bgp_interface_address_del"
- Revert "bgpd: fix removing ipv6 global nexhop"
- Revert "bgpd: fix "used" json key on link-local nexthop"
- Revert "tests: ipv6 global removal in bgp_nexthop_mp_ipv4_6"
- Revert "bgpd: set ipv4-mapped ipv6 for ipv4 with ipv6 nexthop"
- Revert "bgpd: prefer link-local to a ipv4-mapped ipv6 global"
- Revert "topotests: update bgp_vrf_leaking_5549_routes"
- Revert "bgpd: optimize bgp_interface_address_add"
- Revert "bgpd: reduce bgp_interface_address_add indentation"
- Revert "bgpd: log new ipv6 global in bgp_interface_address_add"
- Revert "bgpd: fix sending ipv6 local nexthop if global present"
- isisd
- Fix crash when reading asla
- Add missing `exit` statement
- Fix update link params after circuit is up
- Fix crash at flex-algo without mpls-te
- Fix memory handling in isis_adj_process_threeway()
- nhrpd
- Fix show nhrp shortcut json
- Fix sending /32 shortcut
- pimd
- Fix crash in pimd
- mgmtd
- Don't add implicit state data when reading config from file
- lib
- Fix distribute-list deletion
- Fix crash on distribute-list delete
- Fix LYD_NEW_PATH_OUTPUT issue to support libyang v3.x
- ripd
- Fix show run output for distribute-list
- zebra
- Ensure non-equal id's are not same nhg's
- Mimic GNU basename() API for non-glibc library e.g. musl
Louis Scalbert [Tue, 27 Aug 2024 16:22:27 +0000 (18:22 +0200)]
isisd: fix update link params after circuit is up
If the link-params are set when the circuit not yet up, the link-params
are never updated.
isis_link_params_update() is called from isis_circuit_up() but returns
immediately because circuit->state != C_STATE_UP. circuit->state is
updated in isis_csm_state_change after isis_circuit_up().
Do not return isis_link_params_update() if circuit->state != C_STATE_UP.
Fixes: 0fdd8b2b11 ("isisd: update link params after circuit is up") Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
(cherry picked from commit 6ce6b7a8564f661495fec17f3ea33eeaf9e2f48c)
Donald Sharp [Tue, 27 Aug 2024 21:08:38 +0000 (17:08 -0400)]
tests: Fix bgp_default_originate_topo1_3
This test was killing bgp on r1 and r2
and then immediately testing that the
default route transitioned. Unfortunately
the test was written that under load the
system might be in a bad state. Let's
modify the code to check for a bgp version
change and then that the bgp state has
come back up
Donald Sharp [Wed, 28 Aug 2024 19:10:04 +0000 (15:10 -0400)]
tests: ospf_netns_vrf should give more time for coming up
Test fails:
test_func = partial(
topotest.router_json_cmp,
router,
"show ip ospf vrf {0}-ospf-cust1 json".format(rname),
expected,
)
_, diff = topotest.run_and_expect(test_func, None, count=10, wait=0.5)
assertmsg = '"{}" JSON output mismatches'.format(rname)
> assert diff is None, assertmsg
E AssertionError: "r1" JSON output mismatches
E assert Generated JSON diff error report:
E
E > $->r1-ospf-cust1->areas->0.0.0.0->nbrFullAdjacentCounter: output has element with value '1' but in expected it has value '2'
Support bundle has this data:
r1# show ip ospf vrf all neighbor
% 2024/08/28 14:55:54.763
VRF Name: r1-ospf-cust1
Neighbor ID Pri State Up Time Dead Time Address Interface RXmtL RqstL DBsmL
10.0.255.3 1 Full/DR 10.547s 39.456s 10.0.3.1 r1-eth1:10.0.3.2 0 0 0
10.0.255.2 1 Full/Backup 0.543s 38.378s 10.0.3.3 r1-eth1:10.0.3.2 1 0 0
So immediately after the test fails this test, the neighbor comes up.
Let's give the test a bit more time for failure to not happen
Louis Scalbert [Fri, 30 Aug 2024 12:08:51 +0000 (14:08 +0200)]
tests: fix nhc1 route check after nhs1 down
After setting down nhs1, the test is checking that nhc1 routing table
matches routes in nhc1/nhrp_route.json. It is incorrect because it
checks that the NHRP route to nhs1 is still present but it should have
disappeared.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Louis Scalbert [Mon, 26 Aug 2024 08:23:12 +0000 (10:23 +0200)]
bgpd: fix labels static-analyser
Fix static-analyser warnings with BGP labels:
> $ scan-build make -j12
> bgpd/bgp_updgrp_packet.c:819:10: warning: Access to field 'extra' results in a dereference of a null pointer (loaded from variable 'path') [core.NullDereference]
> ? &path->extra->labels->label[0]
> ^~~~~~~~~
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
> #0 __pthread_kill_implementation (no_tid=0, signo=11, threadid=140486233631168) at ./nptl/pthread_kill.c:44
> #1 __pthread_kill_internal (signo=11, threadid=140486233631168) at ./nptl/pthread_kill.c:78
> #2 __GI___pthread_kill (threadid=140486233631168, signo=signo@entry=11) at ./nptl/pthread_kill.c:89
> #3 0x00007fc5802e9476 in __GI_raise (sig=11) at ../sysdeps/posix/raise.c:26
> #4 0x00007fc58076021f in core_handler (signo=11, siginfo=0x7ffd38d42470, context=0x7ffd38d42340) at lib/sigevent.c:248
> #5 <signal handler called>
> #6 0x000055c527f798c9 in isis_link_params_update_asla (circuit=0x55c52aaed3c0, ifp=0x55c52a1044e0) at isisd/isis_te.c:176
> #7 0x000055c527fb29da in isis_instance_flex_algo_create (args=0x7ffd38d43120) at isisd/isis_nb_config.c:2875
> #8 0x00007fc58072655b in nb_callback_create (context=0x55c52ab1d2f0, nb_node=0x55c529f72950, event=NB_EV_APPLY, dnode=0x55c52ab06230, resource=0x55c52ab189f8, errmsg=0x7ffd38d43750 "",
> errmsg_len=8192) at lib/northbound.c:1262
> #9 0x00007fc580727625 in nb_callback_configuration (context=0x55c52ab1d2f0, event=NB_EV_APPLY, change=0x55c52ab189c0, errmsg=0x7ffd38d43750 "", errmsg_len=8192) at lib/northbound.c:1662
> #10 0x00007fc580727c39 in nb_transaction_process (event=NB_EV_APPLY, transaction=0x55c52ab1d2f0, errmsg=0x7ffd38d43750 "", errmsg_len=8192) at lib/northbound.c:1794
> #11 0x00007fc580725f77 in nb_candidate_commit_apply (transaction=0x55c52ab1d2f0, save_transaction=true, transaction_id=0x0, errmsg=0x7ffd38d43750 "", errmsg_len=8192)
> at lib/northbound.c:1131
> #12 0x00007fc5807260d1 in nb_candidate_commit (context=..., candidate=0x55c529f0a730, save_transaction=true, comment=0x0, transaction_id=0x0, errmsg=0x7ffd38d43750 "", errmsg_len=8192)
> at lib/northbound.c:1164
> #13 0x00007fc58072d220 in nb_cli_classic_commit (vty=0x55c52a0fc6b0) at lib/northbound_cli.c:51
> #14 0x00007fc58072d839 in nb_cli_apply_changes_internal (vty=0x55c52a0fc6b0,
> xpath_base=0x7ffd38d477f0 "/frr-isisd:isis/instance[area-tag='1'][vrf='default']/flex-algos/flex-algo[flex-algo='129']", clear_pending=false) at lib/northbound_cli.c:178
> #15 0x00007fc58072dbcf in nb_cli_apply_changes (vty=0x55c52a0fc6b0, xpath_base_fmt=0x55c528014de0 "./flex-algos/flex-algo[flex-algo='%ld']") at lib/northbound_cli.c:234
> #16 0x000055c527fd3403 in flex_algo_magic (self=0x55c52804f1a0 <flex_algo_cmd>, vty=0x55c52a0fc6b0, argc=2, argv=0x55c52ab00ec0, algorithm=129, algorithm_str=0x55c52ab120d0 "129")
> at isisd/isis_cli.c:3752
> #17 0x000055c527fc97cb in flex_algo (self=0x55c52804f1a0 <flex_algo_cmd>, vty=0x55c52a0fc6b0, argc=2, argv=0x55c52ab00ec0) at ./isisd/isis_cli_clippy.c:6445
> #18 0x00007fc5806b9abc in cmd_execute_command_real (vline=0x55c52aaf78f0, vty=0x55c52a0fc6b0, cmd=0x0, up_level=0) at lib/command.c:984
> #19 0x00007fc5806b9c35 in cmd_execute_command (vline=0x55c52aaf78f0, vty=0x55c52a0fc6b0, cmd=0x0, vtysh=0) at lib/command.c:1043
> #20 0x00007fc5806ba1e5 in cmd_execute (vty=0x55c52a0fc6b0, cmd=0x55c52aae6bd0 "flex-algo 129\n", matched=0x0, vtysh=0) at lib/command.c:1209
> #21 0x00007fc580782ae1 in vty_command (vty=0x55c52a0fc6b0, buf=0x55c52aae6bd0 "flex-algo 129\n") at lib/vty.c:615
> #22 0x00007fc580784a05 in vty_execute (vty=0x55c52a0fc6b0) at lib/vty.c:1378
> #23 0x00007fc580787131 in vtysh_read (thread=0x7ffd38d4ab10) at lib/vty.c:2373
> #24 0x00007fc58077b605 in event_call (thread=0x7ffd38d4ab10) at lib/event.c:2011
> #25 0x00007fc5806f8976 in frr_run (master=0x55c529df9b30) at lib/libfrr.c:1212
> #26 0x000055c527f301bc in main (argc=5, argv=0x7ffd38d4ad58, envp=0x7ffd38d4ad88) at isisd/isis_main.c:350
> (gdb) f 6
> #6 0x000055c527f798c9 in isis_link_params_update_asla (circuit=0x55c52aaed3c0, ifp=0x55c52a1044e0) at isisd/isis_te.c:176
> 176 list_delete_all_node(ext->aslas);
> (gdb) p ext
> $1 = (struct isis_ext_subtlvs *) 0x0
Fixes: ae27101e6f ("isisd: fix building asla at first flex-algo config") Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
(cherry picked from commit cd81d28ae253e64665ce7c45e18e479e3fc2f90d)
Corey Siltala [Fri, 23 Aug 2024 18:04:26 +0000 (18:04 +0000)]
pimd: Fix crash in pimd
ifp->info is not always set in PIM. So add a guard here to stop
it from crashing when addresses are added to a non-PIM enabled interface
and PIM zebra debugging is enabled.
Louis Scalbert [Fri, 23 Aug 2024 14:05:45 +0000 (16:05 +0200)]
nhrpd: fix sending /32 shortcut
The remote spoke always sends a 32 prefix length to a shortcut request.
In the example, the remote spoke as the IP address 192.168.2.1/24.
spoke1# sh ip nhrp shortcut
Type Prefix Via Identity
dynamic 192.168.2.1/32 10.255.255.2
Do not deal with local routes in nhrpd. Now:
spoke1# sh ip nhrp shortcut
Type Prefix Via Identity
dynamic 192.168.2.0/24 10.255.255.2
Fixes: d4aa24ba7d ("*: Introduce Local Host Routes to FRR") Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
(cherry picked from commit af54901405474b0623bda1899424ec18a3240c71)
Khem Raj [Fri, 15 Mar 2024 21:34:06 +0000 (14:34 -0700)]
zebra: Mimic GNU basename() API for non-glibc library e.g. musl
musl only provides POSIX version of basename and it has also removed
providing it via string.h header [1] which now results in compile errors
with newer compilers e.g. clang-18
Dmytro Shytyi [Thu, 8 Aug 2024 13:42:40 +0000 (15:42 +0200)]
topotest: test_bgp_snmp_bgpv4v2_notification
This test checks the bgp crash on rt2 when 2 commands
launched consequently:
T0: rr, config -> router bgp 65004 -> neighbor 192.168.12.2 password 8888
T1: rt2, snmpwalk -v 2c -c public 127.0.0.1 .1.3.6.1.4.1.7336.4.2.1
T2: test if rt2 bgp is crashed.
Louis Scalbert [Tue, 20 Aug 2024 08:33:30 +0000 (10:33 +0200)]
bgpd: fix crash at no rpki
When 'no rpki' is requested and the rtrlib RPKI object was freed, bgpd
is crashing.
RPKI is configured in VRF red.
> ip l set red down
> ip l del red
> printf 'conf\n vrf red\n no rpki' | vtysh
> Core was generated by `/usr/bin/bgpd -A 127.0.0.1 -M snmp -M rpki -M bmp'.
> Program terminated with signal SIGSEGV, Segmentation fault.
> #0 __pthread_kill_implementation (no_tid=0, signo=11, threadid=140411103615424) at ./nptl/pthread_kill.c:44
> 44 ./nptl/pthread_kill.c: No such file or directory.
> [Current thread is 1 (Thread 0x7fb401f419c0 (LWP 190226))]
> (gdb) bt
> #0 __pthread_kill_implementation (no_tid=0, signo=11, threadid=140411103615424) at ./nptl/pthread_kill.c:44
> #1 __pthread_kill_internal (signo=11, threadid=140411103615424) at ./nptl/pthread_kill.c:78
> #2 __GI___pthread_kill (threadid=140411103615424, signo=signo@entry=11) at ./nptl/pthread_kill.c:89
> #3 0x00007fb4021ad476 in __GI_raise (sig=11) at ../sysdeps/posix/raise.c:26
> #4 0x00007fb4025ce22b in core_handler (signo=11, siginfo=0x7fff831b2d70, context=0x7fff831b2c40) at lib/sigevent.c:248
> #5 <signal handler called>
> #6 rtr_mgr_remove_group (config=0x55fe8789f750, preference=11) at /build/make-pkg/output/source/DIST_RTRLIB/rtrlib/rtrlib/rtr_mgr.c:607
> #7 0x00007fb40145f518 in rpki_delete_all_cache_nodes (rpki_vrf=0x55fe8789f4f0) at bgpd/bgp_rpki.c:442
> #8 0x00007fb401463098 in no_rpki_magic (self=0x7fb40146bba0 <no_rpki_cmd>, vty=0x55fe877f5130, argc=2, argv=0x55fe877fccd0) at bgpd/bgp_rpki.c:1732
> #9 0x00007fb40145c09a in no_rpki (self=0x7fb40146bba0 <no_rpki_cmd>, vty=0x55fe877f5130, argc=2, argv=0x55fe877fccd0) at ./bgpd/bgp_rpki_clippy.c:37
> #10 0x00007fb402527abc in cmd_execute_command_real (vline=0x55fe877fd150, vty=0x55fe877f5130, cmd=0x0, up_level=0) at lib/command.c:984
> #11 0x00007fb402527c35 in cmd_execute_command (vline=0x55fe877fd150, vty=0x55fe877f5130, cmd=0x0, vtysh=0) at lib/command.c:1043
> #12 0x00007fb4025281e5 in cmd_execute (vty=0x55fe877f5130, cmd=0x55fe877fb8c0 "no rpki\n", matched=0x0, vtysh=0) at lib/command.c:1209
> #13 0x00007fb4025f0aed in vty_command (vty=0x55fe877f5130, buf=0x55fe877fb8c0 "no rpki\n") at lib/vty.c:615
> #14 0x00007fb4025f2a11 in vty_execute (vty=0x55fe877f5130) at lib/vty.c:1378
> #15 0x00007fb4025f513d in vtysh_read (thread=0x7fff831b5fa0) at lib/vty.c:2373
> #16 0x00007fb4025e9611 in event_call (thread=0x7fff831b5fa0) at lib/event.c:2011
> #17 0x00007fb402566976 in frr_run (master=0x55fe871a14a0) at lib/libfrr.c:1212
> #18 0x000055fe857829fa in main (argc=9, argv=0x7fff831b6218) at bgpd/bgp_main.c:549
Fixes: 8156765abe ("bgpd: Add `no rpki` command") Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
(cherry picked from commit 4e053d65f1c7edbcc3391026300388513d4c31b0)
The crash analysis indicates a memory item has been freed.
> #6 0x000076066a629c15 in mt_count_free (mt=0x56b57be85e00 <MTYPE_BGP_NAME>, ptr=0x60200038b4f0)
> at lib/memory.c:73
> #7 mt_count_free (ptr=0x60200038b4f0, mt=0x56b57be85e00 <MTYPE_BGP_NAME>) at lib/memory.c:69
> #8 qfree (mt=mt@entry=0x56b57be85e00 <MTYPE_BGP_NAME>, ptr=0x60200038b4f0) at lib/memory.c:129
> #9 0x000056b57bb09ce9 in bgp_free (bgp=<optimized out>) at bgpd/bgpd.c:4120
> #10 0x000056b57bb0aa73 in bgp_unlock (bgp=<optimized out>) at ./bgpd/bgpd.h:2513
> #11 peer_free (peer=0x62a000000200) at bgpd/bgpd.c:1313
> #12 0x000056b57bb0aca8 in peer_unlock_with_caller (name=<optimized out>, peer=<optimized out>)
> at bgpd/bgpd.c:1344
> #13 0x000076066a6dbb2c in event_call (thread=thread@entry=0x7ffc8cae1d60) at lib/event.c:2011
> #14 0x000076066a60aa88 in frr_run (master=0x613000000040) at lib/libfrr.c:1214
> #15 0x000056b57b8b2c44 in main (argc=<optimized out>, argv=<optimized out>) at bgpd/bgp_main.c:543
Actually, the BGP_NAME item has not been used at allocation for
static->prd_pretty, and this results in reaching 0 quicker at bgp
deletion.
Fix this by reassigning MTYPE_BGP_NAME to prd_pretty.
Fixes: 16600df2c4f4 ("bgpd: fix show run of network route-distinguisher") Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
(cherry picked from commit 64594f8a6830eec5cc20b9c8a8676d1f62a16bcd)
Mark Stapp [Fri, 9 Aug 2024 14:08:21 +0000 (10:08 -0400)]
isisd: fix memory handling in isis_adj_process_threeway()
The adj_process_threeway() api may call the adj_state_change()
api, which may delete the adj struct being examined. Change the
signature so that callers pass a ptr-to-ptr so that they will
see that deletion.
Donald Sharp [Sat, 10 Aug 2024 23:43:08 +0000 (19:43 -0400)]
zebra: Ensure non-equal id's are not same nhg's
The function zebra_nhg_hash_equal is only used
as a hash function for storage of NHG's and retrieval.
If you have say two nhg's:
31 (25/26)
32 (25/26)
This function would return them as being equal. Which
of course leads to the problem when you attempt to
hash_release 32 but release 31 from the hash. Then later
when you attempt to do hash comparisons 32 has actually
been freed leaving to use after free situations and shit
goes down hill fast.
This hash is only used as part of the hash comparison
function for nexthop group storage. Since this is so
let's always return the 31/32 nhg's are not equal at all.
We possibly have a different problem where we are creating
31 and 32 ( when 31 should have just been used instead of 32 )
but we need to prevent any type of hash release problem at all.
This supercedes any other issue( that should be tracked down
on it's own ). Since you can have use after free situation
that leads to a crash -vs- some possible nexthop group duplication
which is very minor in comparison.
Igor Ryzhov [Wed, 7 Aug 2024 21:40:51 +0000 (00:40 +0300)]
mgmtd: don't add implicit state data when reading config from file
When mgmt reads configuration from file, it shouldn't add implicit state
data to the candidate datastore. Configuration datastores like candidate
should never store state, otherwise they fail validation.
Igor Ryzhov [Wed, 7 Aug 2024 22:25:02 +0000 (01:25 +0300)]
ripd: fix show run output for distribute-list
CLI show callbacks should be defined in frr_ripd_cli_info instead of
frr_ripd_info, because only the former is loaded by mgmtd and only its
callbacks are getting called for config output.
* Breaking changes
- Enable BGP dynamic capability by default for datacenter profile
- Split BGP `rpki cache` command into separate per SSH/TCP
- Add deprecation cycle for OSPF `router-info X [A.B.C.D]` command
* Features
- BGP dampening per-neighbor support
- BMP send-experimental stats
- Implement extended link-bandwidth for BGP
- Paths Limit for Multiple Paths in BGP
- New command for OSPFv2 `ip ospf neighbor-filter NAME [A.B.C.D]`
- Implement non-broadcast support for point-to-multipoint networks
* Other significant changes
bgpd
- Fix route leaking from the default l3vrf
- Fix `match peer` when switching between IPv4/IPv6/interface
- Fix dynamic peer graceful restart race condition
- Fix colored routes not installed after a switchover
- Fix crash when deleting the SRv6 locator
- Fix `no set as-path prepend ASNUM...`
- Fix negative commands for Graceful-Restart operations
- Fix ipv4-mapped ipv6 on non 6pe
- Fix show run of network route-distinguisher
- Fix display when using `missing-as-worst`
- Fix `show bgp neighbors` output
- Fix error handling for MP/GR capabilities as a dynamic capability
- Fix error handling when receiving BGP Prefix-SID attribute
- Fix route-target display with a dotted format
- Fix `no bgp as-path access-list`
- Fix `no` form for `neighbor X capability software-version`
- Check against extended community unit size for link bandwidth
- Make sure we have enough data to handle extended link bandwidth
- Check if FQDN capability length is in valid ranges
- Allow using different ASNs per VRF instances
- Send End-of-RIB not only if Graceful-Restart capability is received
- Implement backpressure to avoid CPU hog
- Ignore validating the attribute flags if path-attribute is configured
- Prevent deletion of BGP peer groups associated with `bgp listen range`
- Inherit some peer flags from the peer-group
- Allow specification of AS 0 for RPKI commands
- Allow using `maximum-prefix` for EVPN
- Increase install/uninstall speed of EVPN VNIs
- Update default-originate route-map actual map structure
- Include `unsuppress-map` as a valid outgoing eBGP policy
- Allow dynamically disable graceful-restart/long-lived graceful-restart
- Unset advertised capabilities if the capability is disabled
- Aggregated summary-only remove suppressed from EVPN
isisd
- Fix crash when deactivating ISIS adjacency on the interface
- Fix `show isis database [detail] json`
- Fix `show isis algorithm`
- Fix crash when configuring the circuit type for the interface
- Fix IP/IPv6 reachability TLVs
- When the metric-type is configured as "wide", the IS-IS generates
incorrect metric values for IPv4 directly connected routes
- Add link state support for SRv6 adjacencies
- The hold time of hello packets on a P2P link does not match the
sending interval
mgmtd
- Implement YANG RPC/action support
ospfd
- Fix crash in OSPF TE parsing
- Fix the bug where ip_ospf_dead-interval_minimal_hello-multiplier did
not reset the hello timer
- Fix `no write-multiplier` command
- Fix `no maximum-paths` command
- Solved crash in RI parsing with OSPF TE
- Assure OSPF AS External routes are installed after the link flap
- Send LS Updates in response to LS Request as unicast
ospf6d
- Handle topo change in Graceful-Restart Helper mode for max-age LSAs
- Prevent heap-buffer-overflow with an unknown type
- Redistribute metric for AS-external route
- Fix next-hop computation for inter-area multi-ABR ECMP
- Fix interface type vs. connected routes updates
pimd
- Fix null register before aging out reg-stop
- Fix dr-priority range
- Fix crash unconfiguring rp keepalive timer
lib
- Fix keychain NB crash
- Do not convert EVPN prefixes into IPv4/IPv6 if not needed
ripd
- Fix `clear ip rip` command
ripngd
- Fix `clear ipv6 ripng` command
tools
- Handle seq num for BGP as-path in frr-reload.py
vtysh
- Fix 'show ip[v6] prefix-list ... json' formatting by moving it to vtysh
- Fix `show route-map` command when calling via `do`
- Show `ip ospf network ...` even if it's not the same as the interface type
zebra
- Fix `mpls label bind` command
- Fix excessive `exit` commands
- Fix static SRv6 segment-list SID order
- Fix JSON output for `show route summary json`
- Fix malformed json output for multiple vrfs in command
`show ip route vrf all json`
- Fix crash if MAC-VLAN link in another netns
- Fix crash on MAC-VLAN link down/up
- Deny the routes if ip protocol CLI refers to an undefined route-map
- Bridge flap handle VLAN membership update
- Add `show fpm status [json]` command
bgpd: Do not process VRF import/export to/from auto created VRF instances
Fixes the crash:
```
(gdb) bt
0 __pthread_kill_implementation (no_tid=0, signo=11, threadid=124583315603008) at ./nptl/pthread_kill.c:44
1 __pthread_kill_internal (signo=11, threadid=124583315603008) at ./nptl/pthread_kill.c:78
2 __GI___pthread_kill (threadid=124583315603008, signo=signo@entry=11) at ./nptl/pthread_kill.c:89
3 0x0000714ed0242476 in __GI_raise (sig=11) at ../sysdeps/posix/raise.c:26
4 0x0000714ed074cfb7 in core_handler (signo=11, siginfo=0x7ffe6d9792b0, context=0x7ffe6d979180) at lib/sigevent.c:258
5 <signal handler called>
6 0x000060f55e33ffdd in route_table_get_info (table=0x0) at ./lib/table.h:177
7 0x000060f55e340053 in bgp_dest_table (dest=0x60f56dabb840) at ./bgpd/bgp_table.h:156
8 0x000060f55e340c9f in is_route_injectable_into_vpn (pi=0x60f56dbc4a60) at ./bgpd/bgp_mplsvpn.h:331
9 0x000060f55e34507c in vpn_leak_from_vrf_update (to_bgp=0x60f56da52070, from_bgp=0x60f56da75af0, path_vrf=0x60f56dbc4a60) at bgpd/bgp_mplsvpn.c:1575
10 0x000060f55e346657 in vpn_leak_from_vrf_update_all (to_bgp=0x60f56da52070, from_bgp=0x60f56da75af0, afi=AFI_IP) at bgpd/bgp_mplsvpn.c:2028
11 0x000060f55e340c10 in vpn_leak_postchange (direction=BGP_VPN_POLICY_DIR_TOVPN, afi=AFI_IP, bgp_vpn=0x60f56da52070, bgp_vrf=0x60f56da75af0) at ./bgpd/bgp_mplsvpn.h:310
12 0x000060f55e34a692 in vpn_leak_postchange_all () at bgpd/bgp_mplsvpn.c:3737
13 0x000060f55e3d91fc in router_bgp (self=0x60f55e5cbc20 <router_bgp_cmd>, vty=0x60f56e2d7660, argc=3, argv=0x60f56da19830) at bgpd/bgp_vty.c:1601
14 0x0000714ed069ddf5 in cmd_execute_command_real (vline=0x60f56da32a80, vty=0x60f56e2d7660, cmd=0x0, up_level=0) at lib/command.c:1002
15 0x0000714ed069df6e in cmd_execute_command (vline=0x60f56da32a80, vty=0x60f56e2d7660, cmd=0x0, vtysh=0) at lib/command.c:1061
16 0x0000714ed069e51e in cmd_execute (vty=0x60f56e2d7660, cmd=0x60f56dbf07d0 "router bgp 100\n", matched=0x0, vtysh=0) at lib/command.c:1227
17 0x0000714ed076faa0 in vty_command (vty=0x60f56e2d7660, buf=0x60f56dbf07d0 "router bgp 100\n") at lib/vty.c:616
18 0x0000714ed07719c4 in vty_execute (vty=0x60f56e2d7660) at lib/vty.c:1379
19 0x0000714ed07740f0 in vtysh_read (thread=0x7ffe6d97c700) at lib/vty.c:2374
20 0x0000714ed07685c4 in event_call (thread=0x7ffe6d97c700) at lib/event.c:1995
21 0x0000714ed06e3351 in frr_run (master=0x60f56d1d2e40) at lib/libfrr.c:1232
22 0x000060f55e2c4b44 in main (argc=7, argv=0x7ffe6d97c978) at bgpd/bgp_main.c:555
(gdb)
```
Rajasekar Raja [Wed, 17 Jul 2024 06:34:15 +0000 (23:34 -0700)]
bgpd: backpressure - fix ret value evpn_route_select_install
The return value of evpn_route_select_install is ignored in all cases
except during vni route table install/uninstall and based on the
returned value, an error is logged. Fixing this.
Christian Hopps [Tue, 23 Jul 2024 21:42:07 +0000 (17:42 -0400)]
lib: mgmtd: fix too early daemon detach of mgmtd
Correct FRR startup counts on a daemon's vty socket to be open when the
parent process exits. The parent process waits for `frr_check_detach()`
to be called by the child before exiting. The problem is when the
`FRR_MANUAL_VTY_START` flag is set the vty socket was not opened but
`frr_check_detach()` was called anyway.
Instead add a bool option for `frr_check_detach()` to be called when the
socket is opened with `frr_vty_serv_start()`, and do so when "manually"
calling said function (i.e., when FRR_MANUAL_VTY_START is set).
The `FRR_MANUAL_VTY_START` flag is only set by mgmtd. The reason we
wait to open the vty socket is so that mgmtd can parse the various
daemon specific config files it has taken over, after the event loop has
started, but before we receive any possible new config from `vtysh`.
ospfd: fix internal ldp-sync state flags when feature is disabled
When enabling "mpls ldp-sync" under "router ospf" ospfd configures
SET_FLAG(ldp_sync_info->flags, LDP_SYNC_FLAG_IF_CONFIG) so internally knowing
that the ldp-sync feature is enabled. However the flag is not cleared when
turning of the feature using "nompls ldp-sync"!
Donald Sharp [Wed, 7 Feb 2024 19:56:15 +0000 (14:56 -0500)]
zebra: Properly note that a nhg's nexthop has gone down
Current code when a link is set down is to just mark the
nexthop group as not properly setup. Leaving situations
where when an interface goes down and show output is
entered we see incorrect state. This is true for anything
that would be checking those flags at that point in time.
Modify the interface down nexthop group code to notice the
nexthops appropriately ( and I mean set the appropriate flags )
and to allow a `show ip route` command to actually display
what is going on with the nexthops.
eva# show ip route 1.0.0.0
Routing entry for 1.0.0.0/32
Known via "sharp", distance 150, metric 0, best
Last update 00:00:06 ago
* 192.168.44.33, via dummy1, weight 1
* 192.168.45.33, via dummy2, weight 1
sharpd@eva:~/frr1$ sudo ip link set dummy2 down
eva# show ip route 1.0.0.0
Routing entry for 1.0.0.0/32
Known via "sharp", distance 150, metric 0, best
Last update 00:00:12 ago
* 192.168.44.33, via dummy1, weight 1
192.168.45.33, via dummy2 inactive, weight 1
Notice now that the 1.0.0.0/32 route now correctly
displays the route for the nexthop group entry.
Rajasekar Raja [Mon, 22 Jul 2024 17:13:19 +0000 (10:13 -0700)]
bgpd: backpressure - Avoid use after free
Coverity complains there is a use after free (1598495 and 1598496)
At this point, most likely dest->refcount cannot go 1 and free up
the dest, but there might be some code path where this can happen.
Fixing this with a simple order change (no harm fix).
Louis Scalbert [Fri, 28 Jun 2024 11:22:36 +0000 (13:22 +0200)]
pimd: fix crash on non-existent interface
Fix the following crash when pim options are (un)configured on an
non-existent interface.
> r1(config)# int fgljdsf
> r1(config-if)# no ip pim unicast-bsm
> vtysh: error reading from pimd: Connection reset by peer (104)Warning: closing connection to pimd because of an I/O error!
> #0 raise (sig=<optimized out>) at ../sysdeps/unix/sysv/linux/raise.c:50
> #1 0x00007f70c8f32249 in core_handler (signo=11, siginfo=0x7fffff88e4f0, context=0x7fffff88e3c0) at lib/sigevent.c:258
> #2 <signal handler called>
> #3 0x0000556cfdd9b16d in lib_interface_pim_address_family_unicast_bsm_modify (args=0x7fffff88f130) at pimd/pim_nb_config.c:1910
> #4 0x00007f70c8efdcb5 in nb_callback_modify (context=0x556d00032b60, nb_node=0x556cffeeb9b0, event=NB_EV_APPLY, dnode=0x556d00031670, resource=0x556d00032b48, errmsg=0x7fffff88f710 "", errmsg_len=8192)
> at lib/northbound.c:1538
> #5 0x00007f70c8efe949 in nb_callback_configuration (context=0x556d00032b60, event=NB_EV_APPLY, change=0x556d00032b10, errmsg=0x7fffff88f710 "", errmsg_len=8192) at lib/northbound.c:1888
> #6 0x00007f70c8efee82 in nb_transaction_process (event=NB_EV_APPLY, transaction=0x556d00032b60, errmsg=0x7fffff88f710 "", errmsg_len=8192) at lib/northbound.c:2016
> #7 0x00007f70c8efd658 in nb_candidate_commit_apply (transaction=0x556d00032b60, save_transaction=true, transaction_id=0x0, errmsg=0x7fffff88f710 "", errmsg_len=8192) at lib/northbound.c:1356
> #8 0x00007f70c8efd78e in nb_candidate_commit (context=..., candidate=0x556cffeb0e80, save_transaction=true, comment=0x0, transaction_id=0x0, errmsg=0x7fffff88f710 "", errmsg_len=8192) at lib/northbound.c:1389
> #9 0x00007f70c8f03e58 in nb_cli_classic_commit (vty=0x556d00025a80) at lib/northbound_cli.c:51
> #10 0x00007f70c8f043f8 in nb_cli_apply_changes_internal (vty=0x556d00025a80,
> xpath_base=0x7fffff893bb0 "/frr-interface:lib/interface[name='fgljdsf']/frr-pim:pim/address-family[address-family='frr-routing:ipv4']", clear_pending=false) at lib/northbound_cli.c:178
> #11 0x00007f70c8f0475d in nb_cli_apply_changes (vty=0x556d00025a80, xpath_base_fmt=0x556cfdde9fe0 "./frr-pim:pim/address-family[address-family='%s']") at lib/northbound_cli.c:234
> #12 0x0000556cfdd8298f in pim_process_no_unicast_bsm_cmd (vty=0x556d00025a80) at pimd/pim_cmd_common.c:3493
> #13 0x0000556cfddcf782 in no_ip_pim_ucast_bsm (self=0x556cfde40b20 <no_ip_pim_ucast_bsm_cmd>, vty=0x556d00025a80, argc=4, argv=0x556d00031500) at pimd/pim_cmd.c:4950
> #14 0x00007f70c8e942f0 in cmd_execute_command_real (vline=0x556d00032070, vty=0x556d00025a80, cmd=0x0, up_level=0) at lib/command.c:1002
> #15 0x00007f70c8e94451 in cmd_execute_command (vline=0x556d00032070, vty=0x556d00025a80, cmd=0x0, vtysh=0) at lib/command.c:1061
> #16 0x00007f70c8e9499f in cmd_execute (vty=0x556d00025a80, cmd=0x556d00030320 "no ip pim unicast-bsm", matched=0x0, vtysh=0) at lib/command.c:1227
> #17 0x00007f70c8f51e44 in vty_command (vty=0x556d00025a80, buf=0x556d00030320 "no ip pim unicast-bsm") at lib/vty.c:616
> #18 0x00007f70c8f53bdd in vty_execute (vty=0x556d00025a80) at lib/vty.c:1379
> #19 0x00007f70c8f55d59 in vtysh_read (thread=0x7fffff896600) at lib/vty.c:2374
> #20 0x00007f70c8f4b209 in event_call (thread=0x7fffff896600) at lib/event.c:2011
> #21 0x00007f70c8ed109e in frr_run (master=0x556cffdb4ea0) at lib/libfrr.c:1217
> #22 0x0000556cfdddec12 in main (argc=2, argv=0x7fffff896828, envp=0x7fffff896840) at pimd/pim_main.c:165
> (gdb) f 3
> #3 0x0000556cfdd9b16d in lib_interface_pim_address_family_unicast_bsm_modify (args=0x7fffff88f130) at pimd/pim_nb_config.c:1910
> 1910 pim_ifp->ucast_bsm_accept =
> (gdb) list
> 1905 case NB_EV_ABORT:
> 1906 break;
> 1907 case NB_EV_APPLY:
> 1908 ifp = nb_running_get_entry(args->dnode, NULL, true);
> 1909 pim_ifp = ifp->info;
> 1910 pim_ifp->ucast_bsm_accept =
> 1911 yang_dnode_get_bool(args->dnode, NULL);
> 1912
> 1913 break;
> 1914 }
> (gdb) p pim_ifp
> $1 = (struct pim_interface *) 0x0
Fixes: 3bb513c399 ("lib: adapt to version 2 of libyang") Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
(cherry picked from commit 6952bea5cdd38057bf8c0a5e9c0fbe916dc73953)
projects / matthieu / frr.git / log