Donald Sharp [Tue, 4 Oct 2022 12:51:38 +0000 (08:51 -0400)]
zebra: Allow tunneldump data to work properly on non-supported kernels
When zebra requests tunnel data it is sending a RTM_GETTUNNEL per
interface that is a VXLAN tunnel. If the kernel that is being
used does not support the particular request type then zebra
will get a error message per tunnel request back. Unfortunately
netlink_parse_info *stops* reading on the first error message.
Therefor one kernels that are returning an error message
let's gather all of those errors. This will allow things
like route reads to actually work properly
bgpd: BGP does not update next-hop when global V6 address is configured
When primary global v6 unicast address is configured on an
unnumbered interface, BGP does not re-advertise updates out
with the new global v6 address as the nexthop
Donald Sharp [Tue, 4 Oct 2022 11:28:51 +0000 (07:28 -0400)]
fabricd: Turn off excessive logging when peering will not come up
When fabricd is configured to use an interface and there will be
no peers out that interface, the log file is filling up with:
Oct 04 10:50:03 host2 fabricd[1444769]: [HHXDJ-1DA93] ISIS-Adj (1): Threeway state change Initializing to Up
Oct 04 10:50:03 host2 fabricd[1444769]: [R18GA-MS9R7] OpenFabric: Started initial synchronization with 1111.1111.1111 on enp1s0f1np1
Oct 04 10:50:06 host2 fabricd[1444769]: [HHXDJ-1DA93] ISIS-Adj (1): Threeway state change Up to Initializing
Oct 04 10:50:07 host2 fabricd[1444769]: [NT6J7-1RYRF] OpenFabric: Initial synchronization on enp1s0f1np1 timed out!
Oct 04 10:50:07 host2 fabricd[1444769]: [R18GA-MS9R7] OpenFabric: Started initial synchronization with 3333.3333.3333 on enp1s0f0np0
Oct 04 10:50:08 host2 fabricd[1444769]: [HHXDJ-1DA93] ISIS-Adj (1): Threeway state change Up to Initializing
Oct 04 10:50:11 host2 fabricd[1444769]: [NT6J7-1RYRF] OpenFabric: Initial synchronization on enp1s0f0np0 timed out!
Oct 04 10:50:11 host2 fabricd[1444769]: [HHXDJ-1DA93] ISIS-Adj (1): Threeway state change Initializing to Up
Oct 04 10:50:11 host2 fabricd[1444769]: [R18GA-MS9R7] OpenFabric: Started initial synchronization with 1111.1111.1111 on enp1s0f1np1
Oct 04 10:50:14 host2 fabricd[1444769]: [HHXDJ-1DA93] ISIS-Adj (1): Threeway state change Up to Initializing
Oct 04 10:50:15 host2 fabricd[1444769]: [NT6J7-1RYRF] OpenFabric: Initial synchronization on enp1s0f1np1 timed out!
Oct 04 10:50:16 host2 fabricd[1444769]: [R18GA-MS9R7] OpenFabric: Started initial synchronization with 1111.1111.1111 on enp1s0f1np1
Oct 04 10:50:18 host2 fabricd[1444769]: [HHXDJ-1DA93] ISIS-Adj (1): Threeway state change Initializing to Up
The `Threeway state change..` message is guarded by a debug, but the other 2 are not.
Let's guard those with debugs since the log will be filled up rather quickly
with any sort of aggressive timers.
Donald Sharp [Fri, 30 Sep 2022 12:57:43 +0000 (08:57 -0400)]
bgpd: Ensure FRR has enough data to read 2 bytes in bgp_open_option_parse
In bgp_open_option_parse the code is checking that the
stream has at least 2 bytes to read ( the opt_type and
the opt_length). However if BGP_OPEN_EXT_OPT_PARAMS_CAPABLE(peer)
is configured then FRR is reading 3 bytes. Which is not good
since the packet could be badly formateed. Ensure that
FRR has the appropriate data length to read the data.
Donald Sharp [Fri, 30 Sep 2022 12:51:45 +0000 (08:51 -0400)]
bgpd: Ensure FRR has enough data to read 2 bytes in peek_for_as4_capability
In peek_for_as4_capability the code is checking that the
stream has at least 2 bytes to read ( the opt_type and the
opt_length ). However if BGP_OPEN_EXT_OPT_PARAMS_CAPABLE(peer)
is configured then FRR is reading 3 bytes. Which is not good
since the packet could be badly formated. Ensure that
FRR has the appropriate data length to read the data.
```
donatas-pc# sh run | include allow-reserved-ranges
allow-reserved-ranges
allow-reserved-ranges
allow-reserved-ranges
allow-reserved-ranges
allow-reserved-ranges
allow-reserved-ranges
donatas-pc#
```
Donald Sharp [Tue, 27 Sep 2022 16:24:16 +0000 (12:24 -0400)]
pimd: Allow v6 to do non-integrated configuration
Proof:
eva# conf
eva(config)# no service integrated-vtysh-config
eva(config)# end
eva# wr mem
Note: this version of vtysh never writes vtysh.conf
Building Configuration...
Configuration saved to /etc/frr/zebra.conf
Configuration saved to /etc/frr/ripd.conf
Configuration saved to /etc/frr/ripngd.conf
Configuration saved to /etc/frr/ospfd.conf
Configuration saved to /etc/frr/ospf6d.conf
Configuration saved to /etc/frr/bgpd.conf
Configuration saved to /etc/frr/isisd.conf
Configuration saved to /etc/frr/pimd.conf
Configuration saved to /etc/frr/nhrpd.conf
Configuration saved to /etc/frr/eigrpd.conf
Configuration saved to /etc/frr/babeld.conf
Configuration saved to /etc/frr/sharpd.conf
Configuration saved to /etc/frr/fabricd.conf
Configuration saved to /etc/frr/pbrd.conf
Configuration saved to /etc/frr/staticd.conf
Configuration saved to /etc/frr/bfdd.conf
Configuration saved to /etc/frr/vrrpd.conf
Configuration saved to /etc/frr/pim6d.conf
eva#
Fixes: #12011 Signed-off-by: Donald Sharp <sharpd@nvidia.com>
pimd: IGMP Querier election is not correct in LAN scenario
When more than 2 routers are present in LAN and the querier
goes down, the other routers will wait for other querier
present timer to expire to elect a new querier.
This issue will be seen when the router having next lower ip
address expires the other querier present timer first and it
starts sending the query message. Now on the other non-querier
routers it will receive this query and reset its other
querier present timer but the querier is still the old one
and since it is lowest ip, it never gets updated to the newly
elected querier.
Reset the other querier timer only if query is received from
the previously elected querier or a better new querier
This will make sure that non-querier elects the new querier
whose ip address is higher than the old querier
when the old querier goes down via other querier querier
timer expiry
When removing VRF ( all routes of this VRF), zebra mistakenly forgot to check
whether its routes are in update queue of FPM. So FPM module will crash during
its dealing with these routes, which are already freed.
Add a new HOOK `rib_shutdown()`, `zebra_rtable_node_cleanup()` will use it
to remove these routes from update queue of FPM module before freeing them.
Donald Sharp [Fri, 23 Sep 2022 19:16:40 +0000 (15:16 -0400)]
doc: Align docs to recommend integrated config
Docs were recommending both integrated and non-integrated
config in different sections. Remove the recommendation
for non-integrated config from vtysh.rst.
Donald Sharp [Mon, 19 Sep 2022 16:34:18 +0000 (12:34 -0400)]
isisd: Fix memory leak on shutdown with prefix lists
==2623619==
==2623619== 6 bytes in 1 blocks are definitely lost in loss record 3 of 75
==2623619== at 0x483877F: malloc (vg_replace_malloc.c:307)
==2623619== by 0x4B55E4A: strdup (strdup.c:42)
==2623619== by 0x493C992: qstrdup (memory.c:128)
==2623619== by 0x1A9212: isis_instance_fast_reroute_level_1_remote_lfa_prefix_list_modify (isis_nb_config.c:1599)
==2623619== by 0x494837C: nb_callback_modify (northbound.c:1083)
==2623619== by 0x4948C6E: nb_callback_configuration (northbound.c:1352)
==2623619== by 0x494919D: nb_transaction_process (northbound.c:1473)
==2623619== by 0x4947DA9: nb_candidate_commit_apply (northbound.c:906)
==2623619== by 0x4947EBA: nb_candidate_commit (northbound.c:938)
==2623619== by 0x494EB9E: nb_cli_classic_commit (northbound_cli.c:64)
==2623619== by 0x494F3DC: nb_cli_apply_changes_internal (northbound_cli.c:250)
==2623619== by 0x494F4E2: nb_cli_apply_changes (northbound_cli.c:268)
==2623619== by 0x1BEF0F: isis_frr_remote_lfa_plist_magic (isis_cli.c:1899)
==2623619== by 0x1B7636: isis_frr_remote_lfa_plist (isis_cli_clippy.c:3406)
==2623619== by 0x48EBA75: cmd_execute_command_real (command.c:997)
==2623619== by 0x48EBD4E: cmd_execute_command_strict (command.c:1108)
==2623619== by 0x48EC1E6: command_config_read_one_line (command.c:1268)
==2623619== by 0x48EC35B: config_from_file (command.c:1313)
==2623619== by 0x4999CC1: vty_read_file (vty.c:2347)
==2623619== by 0x499A4AF: vty_read_config (vty.c:2567)
==2623619== by 0x4924B12: frr_config_read_in (libfrr.c:984)
==2623619== by 0x498F5E3: thread_call (thread.c:2008)
==2623619== by 0x49253DA: frr_run (libfrr.c:1198)
==2623619== by 0x14FC53: main (isis_main.c:273)
Abhishek N R [Mon, 29 Aug 2022 12:17:08 +0000 (05:17 -0700)]
pimd, pim6d: Changing IGMP to GM in few macro's.
Changing
IGMP_DEFAULT_ROBUSTNESS_VARIABLE to GM_DEFAULT_ROBUSTNESS_VARIABLE,
IGMP_GENERAL_QUERY_INTERVAL to GM_GENERAL_QUERY_INTERVAL,
IGMP_QUERY_MAX_RESPONSE_TIME_DSEC to GM_QUERY_MAX_RESPONSE_TIME_DSEC and
IGMP_SPECIFIC_QUERY_MAX_RESPONSE_TIME_DSEC to GM_SPECIFIC_QUERY_MAX_RESPONSE_TIME_DSEC
to accomodate both igmp and mld. And moved it to common file.
When R1 and R2 establish BGP session, R1 begins to send initial updates.
If R2 sends a route-refresh request before EoR, it's silently ignored
by R1, and routes received earlier have no chance to be processed again.
RFC7313 says, "for a BGP speaker that supports the BGP Graceful Restart,
it MUST NOT send a BoRR for an <AFI, SAFI> to a neighbor before it sends
the EoR for the <AFI, SAFI> to the neighbor." But it doesn't forbid
route-refresh request to be sent before receiving EoR.
To handle this scenario, postpone response to refresh request until EoR
is sent.
CID 1519843 (#2 of 2): Uninitialized scalar variable (UNINIT)
43. uninit_use_in_call: Using uninitialized value pkt_src->sin6_addr when calling gm_rx_process
Donald Sharp [Wed, 14 Sep 2022 17:48:31 +0000 (13:48 -0400)]
lib: Fix skip of every other plist deletion
When bulk deleting prefix lists on shutdown the code
was calling plist_delete, which removed the item
from the master->str list, and then popping the next
item on the list and just dropping it on the floor.
The pop is not needed.
projects / mirror / frr.git / log