Donald Sharp [Sat, 4 Nov 2023 08:15:54 +0000 (08:15 +0000)]
*: Remove netlink headers from lib/zebra.h
The headers associated with netlink code
really only belong in those that need it.
Move these headers out of lib/zebra.h and
into more appropriate places. bgp's usage
of the RT_TABLE_XXX defines are probably not
appropriate and will be cleaned up in future
commits.
Donald Sharp [Mon, 6 Nov 2023 13:56:50 +0000 (08:56 -0500)]
zebra: When using Nexthop groups, use v6 RR semantics
The nexthop group route replace operation was made consistent
across all versions of the kernel. A v6 route replacement
does not need to do a delete than add when using nexthop
groups
Donald Sharp [Fri, 3 Nov 2023 16:35:45 +0000 (16:35 +0000)]
zebra: Add v6_rr_semantics status to `show zebra`
The v6_rr_semantics variable was being set but never
reported and had to be inferred from watching netlink
messages to the kernel. Let's add a bit of code
to `show zebra` so that we can know how it is being
used.
David Lamparter [Wed, 30 Nov 2022 10:19:14 +0000 (11:19 +0100)]
lib: add a transparent union for sockaddrs
As with "prefixptr"/"prefixconstptr", this allows function prototypes to
say "just give me any sockaddr" typing-wise, without having the compiler
complain that a "struct sockaddr_in" is not a "struct sockaddr".
(Split off from other changes that start using this.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Donald Sharp [Thu, 2 Nov 2023 23:17:48 +0000 (19:17 -0400)]
lib: Remove unused WQ_RETRY_XXX enums
These enum's have been around since 2005 and FRR
still does not have any users of these particular
values. After almost 20 years, let's simplify the
code slightly and remove them.
Donald Sharp [Sun, 29 Oct 2023 20:04:16 +0000 (16:04 -0400)]
zebra: Fix missing break in switch
Recent Changes added the -Wimplicit-fallthrough flag
to FRR's compilation. Implementor does not build with
lua support and as such this one was missed in the compilation
Farid Mihoub [Fri, 3 Nov 2023 12:53:43 +0000 (13:53 +0100)]
pathd: rework debug pathd pcep command
Rework "debug pathd pcep [...]" command to support the following
configurations:
- configure one debugging log type at a time.
- deconfigure one debugging log type at a time.
- configure all debugging logs in one shot.
- deconfigure all debugging logs in one shot.
route-map TEST permit 140
description rule for PFIX_IPV6_7
match ipv6 address prefix-list PFIX_IPV6_7
exit
!
end
torc-11# confi t
torc-11(config)# route-map TEST permit 140
torc-11(config-route-map)# no description rule for PFIX_IPV6_7
% Unknown command: no description rule for PFIX_IPV6_7
torc-11(config-route-map)# no description rule
% There is no matched command.
torc-11(config-route-map)# no description
<cr>
torc-11(config-route-map)# no description
torc-11(config-route-map)#
Using frr-reload failure log:
2023-10-31 00:30:31,972 INFO: Failed to execute route-map TEST permit 140 no description rule for PFIX_IPV6_7 exit
2023-10-31 00:30:31,972 ERROR: "route-map TEST permit 140 -- no description rule for PFIX_IPV6_7 -- exit" we failed to remove this command
2023-10-31 00:30:31,972 ERROR: % Unknown command: no description rule for PFIX_IPV6_7
With fix:
2023-11-02 06:10:30,024 INFO: Executed "route-map TEST permit 140 no description exit"
Donald Sharp [Tue, 31 Oct 2023 17:06:16 +0000 (13:06 -0400)]
pimd: Ensure upstream points at the correct rpf
In the scenario on an intermediate router where a *,G join has
been received and a S,G stream is being sent through that router
on the *,G stream, there exists a situation when the *,G in has been pruned
but the stream is still being received on on incoming interface towards
the RP for the *,G. In this situation PIM will see the S,G stream
initially as a NOCACHE from the dataplane, PIM will then do a RPF
for the S and notice that it is supposed to be coming in on adifferent
interface. In this case PIM the original PIM code would create
a blackhole mroute towards the RPF of the *,G( the interface the
stream is being received on ). The original reason for this is that
if there is a scenario where this particular S1,G stream is sending
at basically line rate, and there also happens to be a different
S2,G stream that is sending at a very low rate. With certain
dataplanes there is no way to really rate limit the S1 -vs- S2
stream and the S1 stream completely overwhelms the S2 stream
for sending up to the control plane for proper pim handling.
The problem then becomes that FRR never properly responds
to the situation where the *,G is rereceived and the S,G
stream switches back over to the SPT for itself and FRR ends
up with a dead mroute that stops everything from working properly.
This code change, installs the blackhole mroute with the RPF
towards the RP for the G and then resets the RPF to the correct
RPF for the Stream but does not modify the mroute. When the
*,G is rereceived and we attempt to transition to the S,G stream
this now works.
As a note: Both David L and myself do not necessarily believe
we fully understand the problem yet. What this does do is fix
all the inconsistent CI issues we are seeing in the topotests
at this time. Internally I am seeing other test failures
in PIM that I don't fully understand and we suspect that
there are other problems in the state machine. We plan to
revisit this problem as we are able to debug the issue better.
In the meantime both David and Myself agree that this gets
the CI working again and Streams end up in the right state.
Donatas Abraitis [Sun, 29 Oct 2023 20:44:45 +0000 (22:44 +0200)]
bgpd: Ignore handling NLRIs if we received MP_UNREACH_NLRI
If we receive MP_UNREACH_NLRI, we should stop handling remaining NLRIs if
no mandatory path attributes received.
In other words, if MP_UNREACH_NLRI received, the remaining NLRIs should be handled
as a new data, but without mandatory attributes, it's a malformed packet.
In normal case, this MUST not happen at all, but to avoid crashing bgpd, we MUST
handle that.
Donatas Abraitis [Fri, 27 Oct 2023 08:56:45 +0000 (11:56 +0300)]
bgpd: Treat EOR as withdrawn to avoid unwanted handling of malformed attrs
Treat-as-withdraw, otherwise if we just ignore it, we will pass it to be
processed as a normal UPDATE without mandatory attributes, that could lead
to harmful behavior. In this case, a crash for route-maps with the configuration
such as:
Christian Hopps [Mon, 30 Oct 2023 07:37:52 +0000 (03:37 -0400)]
tests: add gdb integration with valgrind
Allows you to run daemons under valgrind integrated with gdb. When daemons are
run with the ``--gdb-daemons/--gdb-routers`` options they will be wired up to
valgrind using vgdb (valgrind tool) so gdb will stop when valgrind errors are
encountered.
Donald Sharp [Sat, 28 Oct 2023 14:03:39 +0000 (10:03 -0400)]
zebra: Add encap type when building packet for FPM
Currently in the single nexthop case w/ evpn sending
down via the FPM the encap type is not being set
for the nexthop.
This looks like the result of some code reorg for the
nexthop happened but the fpm failed to be accounted for.
Let's just move the encap type encoding to where it
will happen.
'detail' and 'josn' keyword is given as an optional parameter
for cli arguments. Hence 'detail' keyword was consider as a
pbr 'name' for "show pbr map detail json" command.
Donatas Abraitis [Thu, 26 Oct 2023 11:56:52 +0000 (14:56 +0300)]
bgpd: Enable `enforce-first-as` by default
It's been for a while disabled by default, but this seems reasonable to flip it.
We had `bgp enforce-first-as` as a global BGP knob to enable/disable this
behavior globally, later we introduced `enforce-first-as` per neighbor, with disabled
by default. Now let's enable this by default by bringing a global `bgp enforce-first-as`
command back.
If the interface type is point-
to-multipoint or the interface is in the state Loopback, the
global scope IPv6 addresses associated with the interface (if any)
are copied into the intra-area-prefix-LSA with the PrefixOptions
LA-bit set, the PrefixLength set to 128, and the metric set to 0.
Donald Sharp [Tue, 24 Oct 2023 20:14:40 +0000 (16:14 -0400)]
bgpd: combine import_check_table and nexthop_check_table
In zebra, the import check table and the nexthop check tables
were combined. This leaves an issue where when bgp happens
to have a tracked address in both the import check table
and the nexthop track table that are the same address.
When the the item is removed from one table the call
to remove it from zebra removes tracking for the other
table.
Combine the two tables together and keep track where
they came from for processing in bgpd.
There is no command to choose to send or not the bgp4-mibv2 traps.
Since the MIB bgp4-mibv2 notification are redundant with MIB RFC4273
we added a command:
- [no] bgp snmp traps bgp4-mibv2
By default, the bgp4-mibv2 traps will be disabled, to prevent from
redundancy.
projects / mirror / frr.git / log