Donald Sharp [Wed, 17 Mar 2021 02:28:29 +0000 (22:28 -0400)]
bgpd: If we have a SAFI conflict do not allow labeled unicast to reset
If we have a SAFI conflict, ie we are trying to activate safi's
UNICAST and LABELED_UNICAST at the same time, we should not
cause bestpath to be rerun and we should not try to put
labels on everything.
Mark Stapp [Tue, 16 Mar 2021 15:28:25 +0000 (11:28 -0400)]
doc: add more notes about new topotests
Add some extra notes to the dev doc section about writing new
topotests: check for OS/kernel support if necessary; avoid
volatile or unstable data like ifindices or link-locals.
error: taking address of packed member 'rsp_addr' of class or structure 'igmp_mtrace' may result in an unaligned pointer value [-Werror,-Waddress-of-packed-member]
Follow the pattern used in the code to solve this problem for clang
Igor Ryzhov [Wed, 10 Mar 2021 19:11:19 +0000 (22:11 +0300)]
bfdd: make sessions administratively up by default
Current behavior is inconsistent. When the session is created by another
daemon, it is up by default. When we later configure peer in bfdd, the
session is still up, but the NB layer thinks that it is down.
More than that, even when the session is created in bfdd using peer
command, it is created in DOWN state, not ADM_DOWN. And it actually
starts sending and receiving packets. The sessions is marked with
SHUTDOWN flag only when we try to reconfigure some parameter. This
behavior is also very unexpected.
Gaurav Goyal [Fri, 5 Feb 2021 05:21:32 +0000 (18:21 +1300)]
nhrpd: Set hop count to 1 in traffic indication
If hop count is 0, this causes Cisco routers to reject the traffic indication
as invalid. This appears to be a Cisco bug, and has been observed in processing
of registration packets in the past. That problem was covered in issue #951
Philippe Guibert [Wed, 17 Feb 2021 10:43:52 +0000 (11:43 +0100)]
zebra: move ipset and ipset_entry to zebra dplane contexts
like it has been done for iptable contexts, a zebra dplane context is
created for each ipset/ipset entry event. The zebra_dplane_ctx job is
then enqueued and processed by separate thread. Like it has been done
for zebra_pbr_iptable context, the ipset and ipset entry contexts are
encapsulated into an union of structures in zebra_dplane_ctx.
There is a specificity in that when storing ipset_entry structure, there
was a backpointer pointer to the ipset structure that is necessary
to get some complementary information before calling the hook. The
proposal is to use an ipset_entry_info structure next to the ipset_entry,
in the zebra_dplane context. That information is used for ipset_entry
processing. The ipset name and the ipset type are the only fields
necessary.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
isisd, yang, doc: combine config cmd for SRGB+SRLB
when changing both ranges at the same time the order of the commands
matters, as we need to make sure that the intermediate state is valid.
This represents a problem when pushing configuration via frr-reload.
To fix this, the global-block command was extended to optionally
allow setting the local-block range as well. The local-block command
is deprecated with a 1-year notice.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
Igor Ryzhov [Tue, 9 Mar 2021 20:08:41 +0000 (23:08 +0300)]
bfdd: fix detect timeout
RFC 5880 Section 6.8.4:
In Asynchronous mode, the Detection Time calculated in the local
system is equal to the value of Detect Mult received from the remote
system, multiplied by the agreed transmit interval of the remote
system (the greater of bfd.RequiredMinRxInterval and the last
received Desired Min TX Interval).
Mark Stapp [Tue, 9 Mar 2021 16:13:41 +0000 (11:13 -0500)]
bgpd: handle socket read errors in the main pthread
Add a handler for socket errors that runs in the main pthread,
rather than the io pthread. When the io pthread encounters a
read error, capture the error and schedule a task for the main
pthread.
Olivier Dugeon [Tue, 9 Mar 2021 10:00:32 +0000 (11:00 +0100)]
ospfd: Correct Segment Routing prefix bugs
This patch solves 2 Segment Routing prefix bugs:
- If Segment Routing is not enabled in the initial configuration, Extended
Prefix Opaque LSA is not flood. This is due to a control flag which is
set only when Segment Routing is enabled at startup and not latter.
- Attempting to modify Segment Routing prefix flag e.g. adding or removing
no-php or explicit-null flag, doesn't work as expected: Corresponding entry
in the MPLS table is not updated, Extended Prefix Opaque LSA carry wrong flag
value, and neighbor set a wrong configuration in the MPLS table for this
Segment Routing prefix.
The first bug is corrected in ospfd/ospf_ext.c:
- Flag setting is moved from ospf_ext_ism_change() to set_ext_prefix() function
The seconf one is corrected in ospfd/ospf_sr.c:
- For self node, previous MPLS entry is removed if needed and flag reset before
setting the new Segment Routing prefix configuration
- For neighbor node, srnext field of sr_prefix structure is always set and not
only for new SR Prefix.
Chirag Shah [Fri, 26 Feb 2021 16:31:07 +0000 (08:31 -0800)]
tools: Mark reload failure when no form cli fails
if no form of the cli fails to execute, mark frr-reload
as failure so return code can be nonzero.
The similar approach is done for non no-form (add case) of the cli.
Donald Sharp [Sat, 6 Mar 2021 14:31:45 +0000 (09:31 -0500)]
bgpd: Display RPKI validation state if we have it
When dumping data about prefixes in bgp. Let's dump the
rpki validation state as well:
Output if rpki is turned on:
janelle# show rpki prefix 2003::/19
Prefix Prefix Length Origin-AS
2003:: 19 - 19 3320
janelle# show bgp ipv6 uni 2003::/19
BGP routing table entry for 2003::/19
Paths: (1 available, best #1, table default)
Not advertised to any peer
15096 6939 3320
::ffff:4113:867a from 65.19.134.122 (193.72.216.231)
(fe80::e063:daff:fe79:1dab) (used)
Origin IGP, valid, external, best (First path received), validation-state: valid
Last update: Sat Mar 6 09:20:51 2021
janelle# show rpki prefix 8.8.8.0/24
Prefix Prefix Length Origin-AS
janelle# show bgp ipv4 uni 8.8.8.0/24
BGP routing table entry for 8.8.8.0/24
Paths: (1 available, best #1, table default)
Advertised to non peer-group peers:
100.99.229.142
15096 6939 15169
65.19.134.122 from 65.19.134.122 (193.72.216.231)
Origin IGP, valid, external, best (First path received), validation-state: not found
Last update: Sat Mar 6 09:21:25 2021
Example output when rpki is not configured:
eva# show bgp ipv4 uni 8.8.8.0/24
BGP routing table entry for 8.8.8.0/24
Paths: (1 available, best #1, table default)
Advertised to non peer-group peers:
janelle(192.168.161.137)
64539 15096 6939 15169
192.168.161.137(janelle) from janelle(192.168.161.137) (192.168.44.1)
Origin IGP, valid, external, bestpath-from-AS 64539, best (First path received)
Last update: Sat Mar 6 09:33:51 2021
projects / mirror / frr.git / log