Donald Sharp [Tue, 19 May 2015 23:36:05 +0000 (16:36 -0700)]
ospfd-spf-stats.patch
Compute and display SPF execution statistics
Detailed SPF statistics, all around time spent executing various pieces of SPF
such as the SPF algorithm itself, installing routes, pruning unreachable networks
etc.
Reason codes for firing up SPF are:
R - Router LSA, N - Network LSA, S - Summary LSA, ABR - ABR status change,
ASBR - ASBR Status Change, AS - ASBR Summary, M - MaxAge
Signed-off-by: Dinesh G Dutt <ddutt@cumulusnetworks.com> Reviewed-by: JR Rivers <jrrivers@cumulusnetworks.com> Reviewed-by: Scott Feldman <sfeldma@cumulusnetworks.com> Reviewed-by: Ayan Banerjee <ayan@cumulusnetworks.com>
Donald Sharp [Tue, 19 May 2015 23:33:52 +0000 (16:33 -0700)]
zebra-enable-link-detect-by-default.patch
zebra: Set link-detect on by default
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Reviewed-by: Dinesh G Dutt <ddutt at cumulusnetworks.com> Reviewed-by: Scott Feldman <sfeldma at cumulusnetworks.com>
Donald Sharp [Tue, 19 May 2015 23:31:06 +0000 (16:31 -0700)]
conditional-quagga-pdf.patch
The building of quagga.pdf requires the convert program out of the imagemagick
package. Getting this to run correctly in the scratchbox2 environment is
painful. Conditionally generate documentation during native compilation.
David Lamparter [Tue, 1 Jul 2014 14:14:05 +0000 (16:14 +0200)]
lib: unset ZEBRA_IFA_PEER if no dst addr present (BZ#801)
On OpenBSD, carp interfaces claim to be PtP interfaces with a 0.0.0.0/0
peer address. We process those in zebra and try to send them to
clients, at which point they get encoded as all-0. The client code,
however, decodes that to a NULL pointer instead of 0.0.0.0. This later
turns into a SEGV when CONNECTED_PREFIX sees that ZEBRA_IFA_PEER is set
and tries to access the peer prefix.
This is a band-aid fix for stable/0.99.23, a long-term solution needs
some conceptual improvements on the entire thing.
(The usefulness of a PtP-to-0.0.0.0/0 is a separate question; at this
point dropping the peer prefix seems the least intrusive solution.)
Reported-by: Laurent Lavaud <laurent.lavaud@ladtech.fr> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
David Lamparter [Mon, 18 Aug 2014 16:05:25 +0000 (18:05 +0200)]
isisd: type mix-up in 28a8cfc "don't require IPv4"
Whoops, these are in6_addrs, not prefix_ipv6... funnily enough, it does the
right thing either way, if it compiles, which it only does on Linux because
IN6_IS_ADDR_LINKLOCAL contains a cast to the right type. On BSD there is no
such cast, hence it explodes on trying to compile, trying to access struct
members of in6_addrs while operating on prefix_ipv6...
Fixes: 28a8cfc ("isisd: don't require IPv4 for adjacency") Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
John Glotzer [Mon, 4 Aug 2014 19:39:23 +0000 (19:39 +0000)]
bgpd: memmove needed in community_del_val
In bgpd/bgp_community_del_val memcpy is used for potentially overlapping
regions which is *not* safe. It may "work" in some cases but is not
guaranteed to work in all cases. The case that I saw fail was on an
x86_64 architecture with the number of bytes being moved/copied equal to
8.
The way the code is written the uint32_t pointers will always differ by
1, which is equivalent to a memcpy/memmove of regions that are 4 bytes
away from one another. So the code failed while copying an 8 byte region
to an address that is 4 bytes lower i.e. overlapping regions.
Interestingly, the same architecture had no problems with a 12 byte
copy.
When the code failed the communities were [200,300,400] and a call was
made to delete the 200 community. The result of this was an array that
looked like [400,400] which was uniquified to [400]. Of course the
expected result should have been [300, 400].
One additional point - in our production environment memmove would not
*link* without including <string.h> but in an isolated quagga git repo
this #include does not seem to be required and I see memmove is used in
vtysh.c without this #include either.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Timo Teräs [Tue, 29 Jul 2014 09:41:55 +0000 (09:41 +0000)]
zebra: fix struct msghdr initializers
struct msghdr field orders are not strictly specified in POSIX.
Improve portability by using designated initializer. This fixes
build against musl c-library where struct msghdr is POSIX
compliant (Linux kernel and glibc definitions are non-conforming).
As the result is also more readable, struct iovec initilizers
were also converted.
Signed-off-by: Timo Teräs <timo.teras@iki.fi> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Timo Teräs [Tue, 29 Jul 2014 09:41:54 +0000 (09:41 +0000)]
*: fix detection and usage of sys/cdefs.h
This header is non-standard (though present on many systems) and
there is no standard for what it should or should not define.
Remove it where it is not really needed. But add also a configure
check, so it can be used if available but otherwise fallback to
defining the needed macroes.
Signed-off-by: Timo Teräs <timo.teras@iki.fi> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
David Lamparter [Sun, 6 Jul 2014 20:33:48 +0000 (22:33 +0200)]
tests/bgpd: don't hardcode error number (fix f57000c)
f57000c ("bgpd: don't send NOTIFY twice for malformed attrs") introduces
BGP_ATTR_PARSE_ERROR_NOTIFYPLS as additional error code that implies the
caller should sent a NOTIFY and convert it to BGP_ATTR_PARSE_ERROR.
Sadly, the latter was hardcoded in bgp_mp_attr_test.c, which now didn't
consider the new value to be an error.
Make the testcase treat all nonzero values as error without discern.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Lu Feng [Wed, 25 Jun 2014 07:43:15 +0000 (07:43 +0000)]
ripd: use only one constant for derivation
RIP_MAX_RTE is defined in ripd.h as 25 but is in fact the
result of a formula. More over it is not used in the code:
the code itself includes the fomula. This makes it un-clear
for maintenance.
Signed-off-by: Feng Lu <lu.feng@6wind.com> Reviewed-by: Alain Ritoux <alain.ritoux@6wind.com> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
David Lamparter [Tue, 3 Jun 2014 23:00:51 +0000 (01:00 +0200)]
bgpd: fix memory leak on malformed attribute
When bgp_attr_parse returns BGP_ATTR_PARSE_ERROR, it may already have
parsed and allocated some attributes before hitting that error. Free
the attr's data before returning.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
David Lamparter [Tue, 3 Jun 2014 22:59:01 +0000 (00:59 +0200)]
bgpd: fix double free after extcommunity set (BZ#799)
The route-map extcommunity set code was incorrectly assuming that it
owns the intern'd struct ecommunity reference. In reality, the intern'd
reference belongs to bgp_update_receive() and we're not supposed to
touch it in the route-map code.
Instead, like all the other set commands, we use a on-heap but
non-intern'd ecommunity to set the new value. This is then either
intern'd in bgp_update_main/_rsclient() through bgp_attr_intern(), or
free'd through bgp_attr_flush().
This fixes Bugzilla #799, which is that bgpd otherwise crashes with a
double free. The ecommunity got unintern'd first in the route-map set
command, then in bgp_update_receive().
Debugged-by: Milan Kocian <milon@wq.cz> Reported-by: Florian S <florian@herrenlohe.de> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
David Lamparter [Tue, 3 Jun 2014 22:54:58 +0000 (00:54 +0200)]
bgpd: fix some bgp_update_main() attribute leaks
bgp_update_main() wasn't doing anything to release attribute values
set from route maps for two of its error paths. To fix, pull up the
appropriate cleanup from further down and apply it here.
bgp_update_rsclient() doesn't have the issue since it immediately
does bgp_attr_intern() on the results from bgp_{export,import}_modifier.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
David Lamparter [Wed, 4 Jun 2014 04:53:35 +0000 (06:53 +0200)]
*: nuke ^L (page feed)
Quagga sources have inherited a slew of Page Feed (^L, \xC) characters
from ancient history. Among other things, these break patchwork's
XML-RPC API because \xC is not a valid character in XML documents.
Nuke them from high orbit.
Patches can be adapted simply by:
sed -e 's%^L%%' -i filename.patch
(you can type page feeds in some environments with Ctrl-V Ctrl-L)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
David Lamparter [Tue, 3 Jun 2014 16:42:25 +0000 (18:42 +0200)]
build: Quagga 0.99.23-rc1
this is not a full release version, so neither release notes nor
documentation are updated yet. Also, signing the tag with my private
GPG key instead of the Quagga one.
Lu Feng [Wed, 19 Feb 2014 09:05:05 +0000 (09:05 +0000)]
isisd: ignore the unrecognized TLVs
When processing LSPDUs, the unrecognized TLVs/sub-TLVs should be
silently ignored.
In parse_tlvs(), ISIS_WARNING is returned once an unrecognized TLV
exists. It breaks the processing in lsp_authentication_check() and
lsp_update_data(). So remove it.
Signed-off-by: Feng Lu <lu.feng@6wind.com> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Timo Teräs [Thu, 24 Apr 2014 06:40:33 +0000 (06:40 +0000)]
lib: remove redundant and incorrect sys/fcntl.h include
POSIX defines <fcntl.h>, <sys/fcntl.h> is the same thing. However,
it should not be used as it's existence can depend on C-library
implementation. E.g. musl gives warning if <sys/fcntl.h> is used.
Signed-off-by: Timo Teräs <timo.teras@iki.fi> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
bgpd: fix crash when allowas-in is done on inactive peer
When allowas-in is changed on a peer that is not up, BGP would crash
trying to do route_refresh. If peer is not up, there is no need
to do notification or send.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Feng Lu <lu.feng@6wind.com> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
bgpd: efficient NLRI packing for AFs != ipv4-unicast
ISSUE:
Currently, for non-ipv4-unicast address families where prefixes are
encoded in MP_REACH/MP_UNREACH attributes, BGP ends up sending one
prefix per UPDATE message. This is quite inefficient. The patch
addresses the issue.
PATCH:
We introduce a scratch buffer in the peer structure that stores the
MP_REACH/MP_UNREACH attributes for non-ipv4-unicast families. This
enables us to encode multiple prefixes. In the end, the two buffers
are merged to create the UPDATE packet.
Signed-off-by: Pradosh Mohapatra <pmohapat@cumulusnetworks.com> Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
[DL: removed no longer existing bgp_packet_withdraw prototype] Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
While announcing a path to a peer, the code currently compares the path's
next-hop with the peer's router-id. This can lead to problems as the router
IDs are unique only within an AS. Suppose AS 1 sends route with next-hop
10.1.1.1. It is possible that the speaker has an established BGP peering
with a router in AS 2 with router ID 10.1.1.1. The route will not be
advertised to that peer in AS 2.
The patch removes this check.
Signed-off-by: Pradosh Mohapatra <pmohapat@cumulusnetworks.com> Reviewed-by: Dinesh G Dutt <ddutt@cumulusnetworks.com> Reviewed-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
readline 6.3 removes some old deprecated funnily-named types. This
updates vtysh to use the new types so it builds again.
Reported-by: Joel Teichroeb <klusark@archlinux.invalid>
References: https://bugs.archlinux.org/task/39495 Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Michal Sekletar [Fri, 16 May 2014 14:13:43 +0000 (14:13 +0000)]
zebra: raise the privileges before calling socket()
Because of recent changes when creating AF_NETLINK socket, kernel will
cache capabilities of the caller and if file descriptor is used or
otherwise handed to another process it will check that current user has
necessary capabilities to use the socket. Hence we need to ensure we
have necessary capabilities when creating the socket and at the time we
use the socket.
Milan Kocian [Fri, 18 Oct 2013 07:59:38 +0000 (07:59 +0000)]
bgpd: Fix condition allowas-in in rsclient code
Currently when you set neighbour's 'allowas-in' option on route server side
you get redistribution of the prefixes from this neighbour's table into all
neighbour's tables which have the same AS number. I think that wanted behaviour
is to allow import prefixes from neighbour's tables with the same AS num
into neighbour which has 'allowas-in' option set.
Signed-off-by: Milan Kocian <milon@wq.cz> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Traditionally, ttl-security feature has been associated with EBGP
sessions as those identify directly connected external peers. The
GTSM RFC (rfc 5082) does not make any restrictions on type of
peering. In fact, it is beneficial to support ttl-security for both
EBGP and IBGP sessions. Specifically, in data centers, there are
directly connected IBGP peerings that will benefit from the protection
ttl-security provides.
Signed-off-by: Dinesh G Dutt <ddutt@cumulusnetworks.com> Reviewed-by: Pradosh Mohapatra <pmohapat@cumulusnetworks.com>
[DL: function refactoring split out into previous 2 patches. changes:
- bgp_set_socket_ttl(): ret type int -> void
- is_ebgp_multihop_configured(): stripped peer == NULL check
- comments/whitespace] Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
David Lamparter [Mon, 19 May 2014 21:15:02 +0000 (23:15 +0200)]
bgpd: factor out eBGP multihop check
The check for an eBGP multihop configuration is unwieldy; factor it out
into a separate function.
[DL: originally by Dinesh G Dutt <ddutt@cumulusnetworks.com>,
split off from the next commit] Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
David Lamparter [Mon, 19 May 2014 20:52:04 +0000 (22:52 +0200)]
bgpd: factor out TTL setting
TTL/min TTL are set from both bgp_accept() and bgp_connect(). Factor
them out so the following change to enable iBGP GTSM becomes more
readable.
[DL: originally by Dinesh G Dutt <ddutt@cumulusnetworks.com>,
split off from the next commit] Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
1. When an interface goes down, the zclient callbacks are invoked
in the following order: (a) address_delete() that removes the
connected address list: ifp->connected, (b) interface_down()
that performs "fast external fallover" operation. The operation
relies on ifp->connected to look for peers that should be brought
down. That's a cyclic dependency.
2. 'ttl-security' configuration handler sets peer->ttl to
MAXTTL (so that BGP packets are sent with TTL=255, as per the
requirement of ttl-security). This, however, is incompatible
with 'fast external fallover' as the fallover operation checks
for (ttl == 1) to determine directly connected peers.
3. The current fallover operation does not work for IPv6 address family.
PATCH
1. The patch removes the dependency on 'ifp->connected' list for fast
fallover. The peer already contains a nexthop structure that reflects
the peering address. The nexthop structure has a pointer to the
interface (ifp) that peering address resolves to. Everytime the TCP
connection succeeds, the ifp is updated. The patch uses this ifp in
the interface_down() callback for a match for the peers that should be
brought down.
2. The evaluation for directly connected peering is enhanced as
'peer->ttl == 1' OR 'peer->gtsm_hops == 1'. Thus a ttl-security
configuration on the peer with one hop is directly connected and
should be brought down under 'fast external fallover'.
3. Because of fix (1), IPv6 address family works automatically.
Signed-off-by: Pradosh Mohapatra <pmohapat@cumulusnetworks.com> Reviewed-by: Dinesh G Dutt <ddutt@cumulusnetworks.com> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Vipin Kumar [Thu, 9 Jan 2014 00:31:22 +0000 (00:31 +0000)]
bgpd: increase TCP socket buffer size
BGP does not respond fairly in high scale. As the number of BGP peers
and prefixes increase, triggers like interface flaps which lead to BGP
peer flaps, cause blockage in bgp_write.
BGP does handle the cases of TCP socket buffer full by queuing a write
event back, there is no functional issue there as such. Still,
increasing the peer socket buffer size should help reduce event queueing
in BGP.
Signed-off-by: Vipin Kumar <vipin@cumulusnetworks.com> Reviewed-by: Pradosh Mohapatra <pmohapat@cumulusnetworks.com> Reviewed-by: Dinesh Dutt <ddutt@cumulusnetworks.com>
[DL: patch split, this is item 3.] Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Vipin Kumar [Thu, 9 Jan 2014 00:31:22 +0000 (00:31 +0000)]
bgpd: fix O_NONBLOCK on outgoing connects
BGP was setting sockets to be non-blocking only for the accepted passive
peers. As a fix, setting the BGP sockets to be non-blocking even for
the active peers.
Signed-off-by: Vipin Kumar <vipin@cumulusnetworks.com> Reviewed-by: Pradosh Mohapatra <pmohapat@cumulusnetworks.com> Reviewed-by: Dinesh Dutt <ddutt@cumulusnetworks.com>
[DL: patch split, this is item 1.] Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
bgpd: send notify in OpenSent when stopping manually
The issue it fixes is that the notification message is not sent to a
second peer when bgp is stopped manually.
According to BGP RFC4271, section 8.2.2, regarding the FSM transitions,
in OpenSent state:
If a ManualStop event (Event 2) is issued in the OpenSent state, the
local system:
* sends the NOTIFICATION with a Cease,
* sets the ConnectRetryTimer to zero,
* releases all BGP resources,
* drops the TCP connection,
* sets the ConnectRetryCounter to zero, and
* changes its state to Idle.
I've added a check for OpenSent state when the notification is sent from
the functions which are called from the CLI commands which
directly/indirectly stop/restart BGP.
Acked-by: Pradosh Mohapatra <pmohapat@cumulusnetworks.com> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The output of "show ip bg" does not show whether and which routes are
installed as multipath routes along the best route:
BGP table version is 0, local router ID is 10.10.100.209
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
r RIB-failure, S Stale, R Removed
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*>i1.0.0.0/24 10.10.100.1 1 111 0 15169 i
* i 10.10.100.2 1 111 0 15169 i
* i 10.10.100.3 1 111 0 65100 15169 i
This patch adds a new status code that is showing exactly which routes
are used as multipath:
BGP table version is 0, local router ID is 10.10.100.209
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*>i1.0.0.0/24 10.10.100.1 1 111 0 15169 i
*=i 10.10.100.2 1 111 0 15169 i
* i 10.10.100.3 1 111 0 65100 15169 i
The inconsistency in the status code legend ("i - internal" vs. "i internal")
inherent from old IOS was fixed. It had to be touched anyways.
Signed-off-by: Boian Bonev <bbonev at ipacct.com>
[DL: rewrap long line, clean whitespace in same chunk] Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
bgpd: track correct originator-id in reflected routes
ISSUE:
Suppose route1 and route2 received from route-reflector-client1 and client2
respectively have identical attributes. The current logic of creating the
adj-rib-out for a peer threads the 'adv' structures for both routes against
the same attribute. This results in 'bgp_update_packet()' to pack those
routes in the same UPDATE message with one attr structure formatted. The
originator-id is thus set according to the first route's received router id.
This is incorrect.
PATCH:
Fix bgp_announce_check() function to set the originator-id in the
advertising attr structure. Also, fix the attribute hash function and
compare function to consider originator-id. Otherwise attributes where all
fields except the originator-id are identical get merged into one memory
location.
Signed-off-by: Pradosh Mohapatra <pmohapat at cumulusnetworks.com> Reviewed-by: Scott Feldman <sfeldma at cumulusnetworks.com> Reviewed-by: Ken Yin <kyin at cumulusnetworks.com>
[DL: whitespace changes dropped] Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Compute multipath in BGP based on AS_PATH hop count match. If the knob
is turned on, it is not required to have an exact match of AS_PATHs
(provided other multipath conditions are met, of course).
Signed-off-by: Pradosh Mohapatra <pmohapat at cumulusnetworks.com> Reviewed-by: Dinesh G Dutt <ddutt at cumulusnetworks.com> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Christian Franke [Mon, 28 Apr 2014 11:42:20 +0000 (11:42 +0000)]
ospfd: add debug messages for router lsa-generation
Add log messages to lsa_link_broadcast_set so it becomes more
apparent why a particular broadcast interface was added as
transit or stub interface.
Signed-off-by: Christian Franke <chris@opensourcerouting.org> Acked-by: Feng Lu <lu.feng@6wind.com> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
ospfd: For an ABR, ensure the right LSID is MaxAge'd
PROBLEM:
Accurate garbage collection of maxage LSAs. The global OSPF structure has
a maxage_lsa tree - the key to the tree is <ls-id, adv-router> tuple. Suppose
the ABR has multiple areas and has originated some intra-area LSAs. The
key for all those LSAs is the same. The code then ends up in a state where
all but the first LSA do not get cleaned up from the areas' LSDB. A subsequent
event would readvertise those LSAs.
PATCH:
Since the LSA is going to stick around till it actually gets cleaned up by
the maxage_walker, make the LSA pointer as the key. Each distinct LSA that
gets maxage'd then gets added to the tree and will get cleaned up correctly.
Signed-off-by: Pradosh Mohapatra <pmohapat@cumulusnetworks.com>
[CF: Use CHAR_BIT; use uintptr_t; use sizeof(field) instead of sizeof(type)] Signed-off-by: Christian Franke <chris@opensourcerouting.org>
[DL: this must remain a temporary fix! needs to be redone after 0.99.23] Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Christian Franke [Mon, 28 Apr 2014 08:04:59 +0000 (08:04 +0000)]
ospfd: clarify indentation and comments in ospf_lsa_maxage_delete
Signed-off-by: Christian Franke <chris@opensourcerouting.org> Acked-by: Feng Lu <lu.feng@6wind.com> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Christian Franke [Mon, 28 Apr 2014 08:04:58 +0000 (08:04 +0000)]
ospfd: fix a reference counting issue introduced by commit 4de8bf0011
Commit 4de8bf0011 added a return statement to a loop iterating over a
route_table. That loop uses route_top/route_next.
As commit 4de8bf0011 failed to add a route_node_unlock before the
return statement, a reference is leaked when this codepath is taken.
Signed-off-by: Christian Franke <chris@opensourcerouting.org> Acked-by: Feng Lu <lu.feng@6wind.com> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Lu Feng [Fri, 21 Feb 2014 08:11:15 +0000 (08:11 +0000)]
ospfd: check the LS-Ack's recentness instead of only comparing the #seq
ISSUE:
RTA(DR)-----(BackupDR)RTB
RTA advertises a new LSA to RTB, and then flushes the LSA (with setting
the age of the LSA to MaxAge) within 1 second. Then the LSA is deleted
from RTA, while it still exists on RTB with non-MaxAge and can not be
flushed any more.
FIX:
The reason can be explained in below:
a) RTA -- new LSA, #seq=1 --> RTB (RTB will send the delayed Ack in 1s)
b) RTA -- MaxAge LSA, #seq=1 --> RTB (RTB discards it for the MIN_LS_ARRIVAL)
c) RTA <-- Ack for the new LSA, #seq=1 -- RTB (RTA accepts it)
In the step c), ospf_ls_ack() compares the #seq of the entry in the LS-Ack
with that of local MaxAge LSA. The #seq of the two entries are same. So
the Ack is accepted and the LSA is removed from the retransmit-list (while
it should not).
In RFC2328, section 13.7. Receiving link state acknowledgments:
o If the acknowledgment is for the same instance that is <==
contained on the list, remove the item from the list and
examine the next acknowledgment. Otherwise:
where "same instance" does not mean the same #seq. We must call
ospf_lsa_more_recent() to check whether the two instances are same.
Signed-off-by: Feng Lu <lu.feng@6wind.com> Signed-off-by: Christian Franke <chris@opensourcerouting.org> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Christian Franke [Thu, 11 Jul 2013 07:56:29 +0000 (07:56 +0000)]
ospfd: don't allow to set network type on loopback interfaces
OSPFd only allocates some stub information for loopback interfaces.
This causes a crash when the interface state machine is started on
that interface by configuring a different network type.
It doesn't make much sense to configure the network type of a loopback
interface, therefore, just forbid it.
See also bugzilla #670.
Signed-off-by: Christian Franke <chris@opensourcerouting.org> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Christian Franke [Wed, 10 Jul 2013 11:56:18 +0000 (11:56 +0000)]
ospfd: run DR election prior to LSA regeneration
The results from DR election are used when constructing router-LSAs.
E.g. they are used to determine whether a broadcast interface should
be added with a link type of stub interface or transit interface.
Therefore, we should run DR election prior before regenerating LSAs.
Signed-off-by: Christian Franke <chris@opensourcerouting.org> Acked-by: Feng Lu <lu.feng@6wind.com> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Ken Williams [Tue, 15 Apr 2014 02:23:11 +0000 (02:23 +0000)]
zebra: Change the mechanism for comparing route ID's.
The current format uses subtraction of two ints. Unfortunately, the
subtraction method does not work for all combinations of numbers.
For example, the with numbers represented by 10.x.x.x and 192.x.x.x,
10.x.x.x - 192.x.x.x will yield a very large positive number indicating
that 10.x.x.x is larger.
Signed-off-by: Ken Williams <kenneth.j.williams@intel.com> Acked-by: Feng Lu <lu.feng@6wind.com> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
David Lamparter [Tue, 1 Apr 2014 17:34:55 +0000 (19:34 +0200)]
tests: fix build & disable testcommands
The perils of having tests, the test wasn't tested thoroughly enough...
Fixup various automake problems, and then disable it since it depends on
configure parameters in its current version.
For 0.99.24 we can ship a static copy of vtysh_cmd.c and have it
reenabled.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Brett Ciphery [Thu, 3 Oct 2013 13:48:54 +0000 (13:48 +0000)]
zebra: set metric for directly connected routes via netlink to 0
a value of 1 is hard coded for the metric field, much like the
ifconfig utility it may have roots in. in order to be in line
with the metric used in the linux kernel itself, we switch this
to 0.
Signed-off-by: Brett Ciphery <brett.ciphery@windriver.com> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
David Lamparter [Thu, 1 Aug 2013 08:12:25 +0000 (08:12 +0000)]
build: remove now-useless --{en, dis}able-tests
commit d771020 "don't build tests unless make check is run" has made the
--{en,dis}able-tests switch completely useless. The differentiation is
now made by running "make check" or not doing so. The only effect of
the switch is an "empty" excursion of make into the tests/ directory.
(well, and it turns "make check" useless from the main directory if
--disable-tests is given, which I don't think makes sense either)
Acked-by: Greg Troxel <gdt@ir.bbn.com> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
David Lamparter [Thu, 1 Aug 2013 07:43:36 +0000 (07:43 +0000)]
build: improve backtrace support/detection
libexecinfo is used to provide backtrace() on *BSD. The API is
compatible with glibc's, so this is a "free" improvement.
To improve configure behaviour, the following configure options are
modified/introduced:
* --enable-gcc-rdynamic now defaults to "on" if the compiler is gcc.
(I sadly wasn't able to find any documentation on the availability of
this option for llvm, even though at least the version I have
installed does support it)
* --enable-backtrace has been added. This behaves as off/auto/on
switch, i.e. giving either {dis,en}able will result in the requested
behaviour (or an error if support wasn't found)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
lib: fix possible off-by-one in stream_put_prefix()
The STREAM_WRITEABLE() call only checks if there is space for the
prefix in the stream but does not account for the prefixlen. The
stream_putc() call reduces available space by 1 and we can end
copying one byte too much and with "endp" off by one if we are
near the buffer end.
Instead of moving the stream_putc() call before STREAM_WRITEABLE(),
we check before hand for the required space, and open-code it. This
avoids a function call and verifying again the stream buffer.
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Fixes commit 97c84db00c (hash: dynamically grow hash table). The
no_expand field it's not initialized and could make the hashes to
never grow the table index.
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Acked-by: Feng Lu <lu.feng@6wind.com> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
837d16c ("*: use array_size() helper macro") accidentally changed one of
the expressions in the backtrace code, which afterwards read:
zlog_backtrace_sigsafe():
if (((size = backtrace(array,array_size(array)) <= 0) ||
which boils down to: (size = backtrace(...) <= 0). The braces were
intended to go: (size = backtrace(...)) <= 0.
All in all, this makes a nice textbook example of the original author
being too clever (trying to save a single line by pulling the assignment
into the condition) and the next person touching the code tripping over
it...
This code occurs another time in zlog_backtrace() where it is actually
correct. Pulling out the assignment nonetheless. Also, new test
program.
Cc: Andrew J. Schorr <ajschorr@alumni.princeton.edu> Cc: Balaji.G <balajig81@gmail.com> Cc: Scott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This command allows the user to change to default reference bandwidth
for cost calculations. The default value is 100 Mbps. With a default
bandwidth of 10 MBps, the default cost becomes 10. Those values are
consistent with OSPFv2.
[DL: resolved conflicts in vty command additions & docs] Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Vincent Bernat [Wed, 24 Oct 2012 14:45:53 +0000 (14:45 +0000)]
ospf6d: compute interface cost from its bandwidth
Previously, the interface cost was a fixed default value that a user
was allowed to change with "ipv6 ospf6 cost XX". As what is done with
OSPFv2, we change this behaviour to compute the default interface cost
from the interface bandwidth.
The user can still force a cost with "ipv6 ospf6 cost XX". He can get
the default value with "no ipv6 ospf6 cost". Moreover, the default
cost value was 1. The cost is now computed from the bandwidth and a
default reference bandwidth of 100 MBps (as for OSPFv2). Since the
default bandwidth for an interface is 10 MBps, the "default" cost
becomes 10 instead of 1.
[DL: resolved conflict in ospf6d/ospf6_interface.c] Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Do not send ospf6d hellos on fresh created interfaces without
configuration (ie. no vlan configured). Ospf6d use ip6_mtu, if it's not
initalised, Ospf6d tries to alloc indefinite size of memory.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
David Lamparter [Sat, 23 Nov 2013 15:55:36 +0000 (16:55 +0100)]
ospf6d: fix interface_down() stopping hellos
interface_down() - which also handles some nonobvious cases like the
last linklocal address disappearing - was previously not cancelling the
hello timer. This had the effect of multiple such threads ending up
scheduled after a quick down-up cycle.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
David Lamparter [Mon, 9 Dec 2013 15:48:55 +0000 (16:48 +0100)]
ospf6d: clear lsa->refresh before clearing LSAs
This fixes a SEGV when we receive a higher-SeqNum copy of a LSA that we
originated ourselves, before a reboot of ospf6d. We create a new
copy of the LSA to resync the SeqNum, but then half an hour later
the old refresh thread ends up trying to refresh the free()'d old LSA.
The SEGV is triggered by this chain:
ospf6_lsdb_maxage_remover
-> thread_execute(ospf6_lsa_refresh)
-> old->refresh = NULL
Which assumes that old->refresh is no longer scheduled to run, as it is
being run right there. But the thread_execute() doesn't know about
old->refresh and therefore didn't remove it.
(Found by ANVL OSPFV3-16.17)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Christian Franke [Thu, 13 Dec 2012 15:11:16 +0000 (16:11 +0100)]
ospf6d: handle missing link local address more gracefully
ospf6 can't run on an interface without a link local address.
Don't start the state machine when an interface comes up without
such an ip and bring it up later, when a usable link local
address is added.
Signed-off-by: Christian Franke <chris@opensourcerouting.org> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Christian Franke [Wed, 27 Nov 2013 17:06:15 +0000 (17:06 +0000)]
zebra: log routes w/o gateway in rib_delete_ipv4
Signed-off-by: Christian Franke <chris@opensourcerouting.org> Acked-by: Feng Lu <lu.feng@6wind.com> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
BGP: While advertising v4 prefixes over a v6 session, set the correct v4 nexthop.
ISSUE:
For an IPv6 peer, BGPd sets the local router-id as the next-hop's v4 address.
This is incorrect as the router-id may not be a valid next-hop to be included
in UPDATEs that contain v4 prefixes.
PATCH:
Set the v4 address in the next-hop field based on the interface that the
peering is on (directly connected interface or loopback).
Signed-off-by: Pradosh Mohapatra <pmohapat at cumulusnetworks.com> Reviewed-by: Scott Feldman <sfeldma at cumulusnetworks.com> Acked-by: Feng Lu <lu.feng@6wind.com>
projects / matthieu / frr.git / log