Donald Sharp [Fri, 25 May 2018 18:45:16 +0000 (14:45 -0400)]
zebra: Add a breadcrumb for when we ignore a route
When we receive a route that we think we own and we
are not in startup conditions, then add a small debug
to help debug the issue when this happens, instead
of silently just ignoring the route.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Donald Sharp [Fri, 25 May 2018 18:36:12 +0000 (14:36 -0400)]
tools, zebra: Use different protocol value for our statics
The re-use of RTPROT_STATIC has caused too many collisions
where other legitimate route sources are causing us to
believe we are the originator of the route. Modify
the code so that if another protocol inserts RTPROT_STATIC
we will assume it's a Kernel Route.
Fixes: #2293 Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We added our own copy of if_link.h (among others). This
file unconditionally defines IFLA_WIRELESS, so we don't need
the conditional defines in the if_netlink.c code...
Issue: https://github.com/FRRouting/frr/issues/2299 Signed-off-by: Arthur Jones <arthur.jones@riverbed.com>
Quentin Young [Thu, 24 May 2018 18:43:57 +0000 (18:43 +0000)]
lib: add proper doc comments for hash & linklist
* Remove references to ospf source files from linklist.[ch]
* Remove documentation comments from hash.c and linklist.c
* Add comprehensive documentation comments to linklist.h and hash.h
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Don Slice [Thu, 24 May 2018 14:58:37 +0000 (10:58 -0400)]
bgpd: additional neighbor message improvement
Added improved error message text to other places that could also
encounter the same condition. In testing found that in certain
case, duplicate error messages were previously issued. This fix
also removes the duplicates.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Don Slice [Wed, 23 May 2018 12:09:59 +0000 (08:09 -0400)]
bgpd: improve error message for neighbor not found
Problem reported due to tab completion showing all possible peers
in every vrf, but when neighbor in wrong vrf entered "no such
neighbor" is the error message. Making it slightly more clear
with "no such neighbor in the view/vrf" to clue the user that they
may have specified the wrong vrf.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Donald Sharp [Tue, 22 May 2018 14:54:20 +0000 (10:54 -0400)]
bgpd: Ensure virt->vrfs is valid
Move the list_delete_and_null of the virt->vrfs code to
the actual deletion function to ensure proper lifecycle.
This assumption allows us to know that irt->vrfs is always
true so remove the NULL check on it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Donald Sharp [Tue, 22 May 2018 14:50:53 +0000 (10:50 -0400)]
bgpd: Free vni list on actual deletion
The irt->vnis list was being freed on going down,
but actually delete it from the deletion function. Then
we can know that the irt->vnis is a valid list anywhere
we have a irt pointer.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Quentin Young [Wed, 16 May 2018 21:07:54 +0000 (21:07 +0000)]
*: remove -r from daemons except zebra
This option is only implemented by 4 daemons:
- BGPD
- RIPD
- RIPNGD
- Zebra
Manpages and documentation say that the option causes routes to not be
uninstalled from zebra when the daemon terminates. This is true for RIPD
and RIPNGD. This is not true for BGPD; in that daemon it only prevents
transmission of Cease / Peer Unconfig NOTIFICATION messages to peers.
Moreover, when any daemon disconnects from Zebra, all of its routes are
uninstalled from Zebra and the kernel regardless of this option,
rendering the option largely vestigial.
It is still useful in Zebra, where it prevents all routes from being
uninstalled when Zebra shuts down, so it is left there.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Donald Sharp [Fri, 18 May 2018 19:41:46 +0000 (15:41 -0400)]
zebra: Allow runtime determination of v6 RR semantics
The linux kernel is getting the same Route Replace semantics
for v6 that v4 uses. Allow the end-user to know if their
kernel has this ability and if so to specify it so zebra
can take advantage of this.
Why not do auto-detection? Because you would have to write
code in zebra to add a route then add the same route again
with different nexthops to see if which semantics it is using.
It sure is easier to just add a cli that allows the user to
do it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Quentin Young [Fri, 18 May 2018 19:10:31 +0000 (19:10 +0000)]
doc: fix distclean
Apparently Automake has some undocumented logic somewhere that makes it
so any Makefile generated from an Automake Makefile.am is removed from
its secret list of things to delete that it deletes when performing a
recursive distclean before actually performing the recursive distclean
and since the secret list is automatically generated from the list of
things that Autoconf should generate in configure.ac we can't remove the
Makefile from that list or it will break Automake's list of things to
automatically generate that it generates from Autoconf's list of things
to automatically generate.
Thus, to prevent Automake from deleting Makefiles and then immediately
trying to use the Makefiles it just deleted to delete said Makefiles, we
must remove ourselves from the secret list, which is accomplished by
changing the file extension to '.am' instead of '.in'.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Donald Sharp [Thu, 17 May 2018 22:46:14 +0000 (18:46 -0400)]
zebra: memset buf to prevent uninited writes into kernel
Setup the buf used for extra data passed into kernel such
that we are cleaning it out before writing data to it,
so we can avoid writing uninited data.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Chirag Shah [Tue, 1 May 2018 23:34:31 +0000 (16:34 -0700)]
ospf6d: Fix ECMP for asbr external routes
Use brouter table to fetch nexthops for
asbr prefix (external) routes.
Change adv. router of the router's path once
the DB/FIB is updated with effective nexthops.
Cleanup of nexthop update when route's adv
router changes cost.
Ticket:CM-16139
Testing Done:
Tested ASBR external routes in CLOS topology with
multiple paths asbr originator at tor to spine.
Validated external route's nexthop within
area and inter area.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Donald Sharp [Wed, 16 May 2018 23:24:22 +0000 (19:24 -0400)]
zebra: Convert zrmac->host_list list to a RB Tree
The host_list when we attempt to use it at scale, ends
up spending a non-trivial amount of time finding and
sorting entries for the host list. Convert to a rb tree.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Quentin Young [Thu, 10 May 2018 17:51:08 +0000 (13:51 -0400)]
doc: add "Getting Started" section
While we have docs on various pieces of the build system we don't have
any docs on how to actually get FRR running once it's installed, nor do
we have comprehensive documentation on the basic procedure for building
from source. This patch remedies both of those.
Also updated the services list in the docs and removed the SERVICES file
from the project root.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Pascal Mathis [Tue, 15 May 2018 17:22:25 +0000 (19:22 +0200)]
bgpd: Improve route-map matching for INET(6) AF
While the current implementation does pay attention to the AF
(inet/inet6) when comparing the IPv4/v6 address against an address-list
/ prefix-list inside a route-map, the AF check is being done rather
late, which leads to CPU cycles being wasted due to unnecessary list
lookups / address matching.
This commit checks the address family of a prefix right inside the
`route_match_ip(v6)_` functions before looking up any address- and/or
prefix-list, which should improve performance.
Pascal Mathis [Mon, 14 May 2018 20:52:31 +0000 (22:52 +0200)]
bgpd: Respect AFI/SAFI when hard-clearing a peer
The current implementation does not respect the AFI+SAFI combination of
a peer when executing a non-soft (hard) clear. An example would be the
command `clear bgp ipv4 unicast *`, which will clear all BGP peers, even
those that do not have IPv4-Unicast activated.
This commit fixes that behavior by applying the same rules to both soft
and hard clear commands, so that peers without a matching AFI+SAFI
combination will be no longer modified.
Additionally, this commit adds warning messages to all `clear bgp
[<afi>] [<safi>] <target>` commands when no matching peers with the given
AFI+SAFI combination could be found.
Both existing and new warning messages have been extended to also
mention the AFI+SAFI combination that is missing, which is more helpful
to the user than a generic expression 'No peer configured'.
projects / mirror / frr.git / log