Louis Scalbert [Thu, 9 Jan 2025 17:28:53 +0000 (18:28 +0100)]
bgpd: fix crash in displaying json orf prefix-list
bgpd crashes when there is several entries in the prefix-list. No
backtrace is provided because the issue was catched from a code review.
Fixes: 856ca177c4 ("Added json formating support to show-...-neighbors-... bgp commands.") Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
(cherry picked from commit 8ccf60921b85893d301186a0f8156fb702da379f)
Louis Scalbert [Thu, 9 Jan 2025 17:24:39 +0000 (18:24 +0100)]
bgpd: fix bgp orf prefix-list json prefix
0x<address>FX was displayed instead of the prefix.
Fixes: b219dda129 ("lib: Convert usage of strings to %pFX and %pRN") Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
(cherry picked from commit b7e843d7e8afe57d3815dbb44e30307654e73711)
Jonathan Voss [Fri, 3 Jan 2025 03:19:30 +0000 (03:19 +0000)]
tools: Add missing rpki keyword to vrf in frr-reload
When reloading the following configuration:
```
vrf red
rpki
rpki cache tcp 172.65.0.2 8282 preference 1
exit
exit-vrf
```
frr-reload.py does not properly enter the `rpki` context
within a `vrf`. Because of this, it fails to apply RPKI
configurations.
Signed-off-by: Donald Sharp <sharpd@nvidia.com> Signed-off-by: Rajasekar Raja <rajasekarr@nvidia.com>
(cherry picked from commit 54ec9f38884fb63e045732537c4c1f4a94608987)
Donatas Abraitis [Mon, 23 Dec 2024 21:07:38 +0000 (23:07 +0200)]
FRR Release 10.1.2
- babeld
- Do not remove route when replacing
- Send the route's metric down to zebra.
- bfdd
- Add no variants to interval configurations
- Retain remote dplane client socket
- bgpd
- Actually make ` --v6-with-v4-nexthops` it work
- Add `bgp ipv6-auto-ra` command
- Allow value 0 in aigp-metric setting
- Avoid use-after-free when doing `no router bgp` with auto created instances
- Fix to pop items off zebra_announce FIFO for few EVPN triggers
- Clear all paths including addpath once GR expires
- Compare aigp after local route check in bgp_path_info_cmp()
- Do not filter no-export community for BGP OAD (one administration domain)
- Do not reset peers on suppress-fib toggling
- EVPN fix per rd specific type-2 json output
- Fix bgp core with a possible Intf delete
- Fix blank line in running-config with bmp listener cmd
- Fix crash when polling bgp4v2PathAttrTable
- Fix display of local label in show bgp
- Fix `enforce-first-as` per peer-group removal
- Fix evpn bestpath calculation when path is not established
- Fix evpn mh esi flap remove local routes
- Fix for match source-protocol in route-map for redistribute cmd
- Fix memory leak when creating BMP connection with a source interface
- Fix memory leak when reconfiguring a route distinguisher
- Fix printfrr_bp for non initialized peers
- Fix resolvedPrefix in show nexthop json output
- Fix route selection with AIGP
- Fix several issues in sourcing AIGP attribute
- Fix unconfigure asdot neighbor
- Fix use single whitespace when displaying flowspec entries
- Fix version attribute is an int, not a string
- Include structure when installing End.DT4/6 SID
- Include structure when installing End.DT46 SID
- Include structure when removing End.DT4/6 SID
- Include structure when removing End.DT46 SID
- Move some non BGP-specific route-map functions to lib
- Set LLGR stale routes for all the paths including addpath
- Treat numbered community-list only if it's in a range 1-500
- Validate both nexthop information (NEXTHOP and NLRI)
- Validate only affected RPKI prefixes instead of a full RIB
- isisd
- Fix change flex-algorithm number from uint32 to uint8
- Fix memory leaks when the transition of neighbor state from non-UP to DOWN
- Fix rcap tlv double-free crash
- Fix wrong check for MT commands
- lib
- Attach stdout to child only if --log=stdout and stdout FD is a tty
- Include SID structure in seg6local nexthop
- Take ge/le into consideration when checking the prefix with the prefix-list
- Keep `zebra on-rib-process script` in frr.conf
- nhrpd
- Fixes duplicate auth extension
- ospfd
- Add a hidden command for old `no router-id`
- Fix heap corruption vulnerability when parsing SR-Algorithm TLV
- Fix missing '[no]ip ospf graceful-restart hello-delay <N>' commands
- Interface 'ip ospf neighbor-filter' startup config not applied.
- Use router_id what Zebra has if we remove a static router_id
- pimd
- Allow resolving bsr via directly connected secondary address
- Fix access-list memory leak in pimd
- vrrpd
- Iterate over all ancillary messages
- zebra
- Add missing new line for help string
- Add missing proto translations
- Correctly report metrics
- Fix crash during reconnect
- Fix heap-use-after free on ns shutdown
- Fix snmp walk of zebra rib
- Let's use memset instead of walking bytes and setting to 0
- Separate zebra ZAPI server open and accept
- Unlock node only after operation in zebra_free_rnh()
bgpd: Validate only affected RPKI prefixes instead of a full RIB
Before this fix, if rpki_sync_socket_rtr socket returns EAGAIN, then ALL routes
in the RIB are revalidated which takes lots of CPU and some unnecessary traffic,
e.g. if using BMP servers. With a full feed it would waste 50-80Mbps.
Instead we should try to drain an existing pipe (another end), and revalidate
only affected prefixes.
Philippe Guibert [Wed, 18 Dec 2024 15:53:48 +0000 (16:53 +0100)]
bgpd: fix memory leak when reconfiguring a route distinguisher
A memory leak happens when reconfiguring an already configured route
distinguisher on an L3VPN BGP instance. Fix this by freeing the previous
route distinguisher.
Donald Sharp [Thu, 5 Dec 2024 18:12:00 +0000 (13:12 -0500)]
bgpd: Fix evpn bestpath calculation when path is not established
If you have a bestpath list that looks something like this:
<local evpn mac route>
<learned from peer out swp60>
<learned from peer out swp57>
And a network event happens that causes the peer out swp60
to not be in an established state, yet we still have the
path_info for the destination for swp60, bestpath
will currently end up with this order:
<learned from peer out swp60>
<local evpn mac route>
<learned from peer out swp57>
This causes the local evpn mac route to be deleted in zebra( Wrong! ).
This is happening because swp60 is skipped in bestpath calculation and
not considered to be a path yet it stays at the front of the list.
Modify bestpath calculation such that when pulling the unsorted_list
together to pull path info's into that list when they are also
not in a established state.
Donatas Abraitis [Tue, 10 Dec 2024 14:28:26 +0000 (16:28 +0200)]
lib: Take ge/le into consideration when checking the prefix with the prefix-list
Without the fix:
```
show ip prefix-list test_1 10.20.30.96/27 first-match
<no result>
show ip prefix-list test_2 192.168.1.2/32 first-match
<no result>
```
With the fix:
```
ip prefix-list test_1 seq 10 permit 10.20.30.64/26 le 27
!
end
donatas# show ip prefix-list test_1 10.20.30.96/27
seq 10 permit 10.20.30.64/26 le 27 (hit count: 1, refcount: 0)
donatas# show ip prefix-list test_1 10.20.30.64/27
seq 10 permit 10.20.30.64/26 le 27 (hit count: 2, refcount: 0)
donatas# show ip prefix-list test_1 10.20.30.64/28
donatas# show ip prefix-list test_1 10.20.30.126/26
seq 10 permit 10.20.30.64/26 le 27 (hit count: 3, refcount: 0)
donatas# show ip prefix-list test_1 10.20.30.126/30
donatas#
```
Rajasekar Raja [Tue, 10 Dec 2024 21:45:02 +0000 (13:45 -0800)]
bgpd: Fix bgp core with a possible Intf delete
Although trigger unknown, based on the backtrace in one of the internal
testing, we do see some delete in the Intf where we can have the peer
ifp pointer null and we try to dereference it while trying to install
the route leading to a crash
Skip updating the ifindex in such cases and since the nexthop is not
properly updated, BGP skips sending it to zebra.
BackTrace:
0 0x00007faef05e7ebc in ?? () from /lib/x86_64-linux-gnu/libc.so.6
1 0x00007faef0598fb2 in raise () from /lib/x86_64-linux-gnu/libc.so.6
2 0x00007faef09900dc in core_handler (signo=11, siginfo=0x7ffdde8cb4b0, context=<optimized out>) at lib/sigevent.c:274
3 <signal handler called>
4 0x00005560aad4b7d8 in update_ipv6nh_for_route_install (api_nh=0x7ffdde8cbe94, is_evpn=false, best_pi=0x5560b21187d0, pi=0x5560b21187d0, ifindex=0, nexthop=0x5560b03cb0dc,
nh_bgp=0x5560ace04df0, nh_othervrf=0) at bgpd/bgp_zebra.c:1273
5 bgp_zebra_announce_actual (dest=dest@entry=0x5560afcfa950, info=0x5560b21187d0, bgp=0x5560ace04df0) at bgpd/bgp_zebra.c:1521
6 0x00005560aad4bc85 in bgp_handle_route_announcements_to_zebra (e=<optimized out>) at bgpd/bgp_zebra.c:1896
7 0x00007faef09a1c0d in thread_call (thread=thread@entry=0x7ffdde8d7580) at lib/thread.c:2008
8 0x00007faef095a598 in frr_run (master=0x5560ac7e5190) at lib/libfrr.c:1223
9 0x00005560aac65db6 in main (argc=<optimized out>, argv=<optimized out>) at bgpd/bgp_main.c:557
(gdb) f 4
4 0x00005560aad4b7d8 in update_ipv6nh_for_route_install (api_nh=0x7ffdde8cbe94, is_evpn=false, best_pi=0x5560b21187d0, pi=0x5560b21187d0, ifindex=0, nexthop=0x5560b03cb0dc,
nh_bgp=0x5560ace04df0, nh_othervrf=0) at bgpd/bgp_zebra.c:1273
1273 in bgpd/bgp_zebra.c
(gdb) p pi->peer->ifp
$26 = (struct interface *) 0x0
Mark Stapp [Wed, 30 Oct 2024 15:02:17 +0000 (11:02 -0400)]
zebra: separate zebra ZAPI server open and accept
Separate zebra's ZAPI server socket handling into two phases:
an early phase that opens the socket, and a later phase that
starts listening for client connections.
Philippe Guibert [Tue, 26 Nov 2024 13:19:34 +0000 (14:19 +0100)]
bgpd: fix use single whitespace when displaying flowspec entries
There is an extra space in the 'Displayed' line of show bgp command,
that should not be present.
Fix this by being consistent with the output of the other address
families.
Fixes: ("a1baf9e84f71") bgpd: Use single whitespace when displaying show bgp summary Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
(cherry picked from commit 561debab5430ac85e8e42e839312d213479a767a)
Donatas Abraitis [Sun, 17 Nov 2024 09:19:19 +0000 (11:19 +0200)]
bgpd: Validate both nexthop information (NEXTHOP and NLRI)
If we receive an IPv6 prefix e.g.: 2001:db8:100::/64 with nextop: 0.0.0.0, and
mp_nexthop: fc00::2, we should not treat this with an invalid nexthop because
of 0.0.0.0. We MUST check for MP_REACH attribute also and decide later if we
have at least one a valid nexthop.
Rajasekar Raja [Thu, 14 Nov 2024 07:09:55 +0000 (23:09 -0800)]
bgpd : backpressure - Fix to pop items off zebra_announce FIFO for few EVPN triggers
In cases such as 'no advertise-all-vni' and L2 VNI DELETE, we need to
pop all the VPN routes present in the bgp_zebra_announce FIFO yet to
be processed regardless of VNI is configured or not.
NOTE: NO need to pop the VPN routes in two cases
1) In free_vni_entry
- Called by bgp_free()->bgp_evpn_cleanup().
- Since bgp_delete is called before bgp_free and we pop all the dest
pertaining to bgp under delete.
2) evpn_delete_vni() when user configures "no vni" since the withdraw
of all routes happen in normal cycle.
Krishnasamy R [Mon, 11 Nov 2024 09:59:31 +0000 (01:59 -0800)]
bgpd: fix resolvedPrefix in show nexthop json output
While populating the nexthop info for "show bgp nexthop json", resolvedPrefix
is added in parent json object instead of json_nexthop object.
This results in displaying wrong resolvedPrefix for nexthops.
Fixing the same by adding resolvedPrefix to json_nexthop object, so that
the proper resolvedPrefix would be displayed for the respective nexthop
Rajasekar Raja [Mon, 21 Oct 2024 17:53:27 +0000 (10:53 -0700)]
bgpd: Fix for match source-protocol in route-map for redistribute cmd
A redistribute cmd can have a route-map attached to it and adding the
match source-protocol to that route-map means BGP to filter which
protocol routes to accept among the bunch of routes zebra is sending.
bgpd: Set LLGR stale routes for all the paths including addpath
Without this patch we set only the first path for the route (if multiple exist)
as LLGR stale and stop doing that for the rest of the paths, which is wrong.
Donatas Abraitis [Thu, 31 Oct 2024 08:47:48 +0000 (10:47 +0200)]
zebra: Add missing new line for help string
```
-A, --asic-offload FRR is interacting with an asic underneath the linux kernel
--v6-with-v4-nexthops Underlying dataplane supports v6 routes with v4 nexthops -s, --nl-bufsize Set netlink receive buffer size
```
Fixes: 1f5611c06d1c243b42279748788f0627793ead9c ("zebra: Allow zebra cli to accept v6 routes with v4 nexthops") Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
(cherry picked from commit 25ae643996d338b8230fb15a9064843fe85de224)
isisd: Fix memory leaks when the transition of neighbor state from non-UP to DOWN
When receiving a hello packet, if the neighbor state transitions directly from a non-ISIS_ADJ_UP state (such as ISIS_ADJ_INITIALIZING) to ISIS_ADJ_DOWN state, the neighbor entry cannot be deleted. If the neighbor is removed or the neighbor's System ID changes, it may result in memory leakage in the neighbor entry.
Test Scenario:
LAN link between Router A and Router B is established. Router A does not configure neighbor authentication, while Router B is configured with neighbor authentication. When the neighbor entry on Router B ages out, the neighbor state on Router A transitions to INIT. If Router B is then removed, the neighbor state on Router A transitions to DOWN and persists.
Louis Scalbert [Fri, 25 Oct 2024 15:54:07 +0000 (17:54 +0200)]
bgpd: fix display of local label in show bgp
Fix the display of the local label in show bgp.
> r1# show bgp ipv4 labeled-unicast 172.16.2.2/32
> BGP routing table entry for 172.16.2.2/32, version 2
> Local label: 16 <---- MISSING
> Paths: (1 available, best #1, table default, vrf (null))
> Advertised to non peer-group peers:
> 192.168.1.2
> 65501
> 192.168.1.2 from 192.168.1.2 (172.16.2.2)
> Origin IGP, metric 0, valid, external, best (First path received)
> Remote label: 3
> Last update: Fri Oct 25 17:55:45 2024
Fixes: 67f67ba481 ("bgpd: Drop label_ntop/label_pton functions") Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
(cherry picked from commit e7b3276ace65d59edb4d614158d4f2959f12f868)
pimd: allow resolving bsr via directly connected secondary address
This only matters to single hop nodes that are adjacent to the bsr. More common
with IPv6 where LL address is used in PIM as the primary address. If the BSR IP
happens to be an address on the same interface, the receiving pim router
rejects the BSR address because it expects the BSR IP to resolve via the LL address
even if we have a connected route for the same BSR IP subnet. Effectively, we want to
allow rpf to be resolved via secondary IPs with connected routes on the same interface,
and not limit them to primary addresses.
Enke Chen [Sun, 20 Oct 2024 19:25:46 +0000 (12:25 -0700)]
bgpd: allow value 0 in aigp-metric setting
The value of 0 is accepted from peers, and can also be set by the
route-map "set aigp-metric igp-metric". For coonsistency, it should
be allowed in "set aigp-metric <value>" as well.
Enke Chen [Wed, 16 Oct 2024 18:15:28 +0000 (11:15 -0700)]
bgpd: fix several issues in sourcing AIGP attribute
Fix several issues in sourcing AIGP attribute:
1) AIGP should not be set as default for a redistributed route or a
static network. It should be set by config instead.
2) AIGP sourced by "set aigp-metric igp-metric" in a route-map does
not set the correct value for a redistributed route.
3) When redistribute a connected route like loopback, the AGIP (with
value 0) is sourced by "set aigp-metric igp-metric", but the
attribute is not propagated as the attribute flag is not set.
> ERROR: AddressSanitizer: heap-use-after-free on address 0x6160000acba4 at pc 0x55910c5694d0 bp 0x7ffe3a8ac850 sp 0x7ffe3a8ac840
> READ of size 4 at 0x6160000acba4 thread T0
> #0 0x55910c5694cf in ctx_info_from_zns zebra/zebra_dplane.c:3315
> #1 0x55910c569696 in dplane_ctx_ns_init zebra/zebra_dplane.c:3331
> #2 0x55910c56bf61 in dplane_ctx_nexthop_init zebra/zebra_dplane.c:3680
> #3 0x55910c5711ca in dplane_nexthop_update_internal zebra/zebra_dplane.c:4490
> #4 0x55910c571c5c in dplane_nexthop_delete zebra/zebra_dplane.c:4717
> #5 0x55910c61e90e in zebra_nhg_uninstall_kernel zebra/zebra_nhg.c:3413
> #6 0x55910c615d8a in zebra_nhg_decrement_ref zebra/zebra_nhg.c:1919
> #7 0x55910c6404db in route_entry_update_nhe zebra/zebra_rib.c:454
> #8 0x55910c64c904 in rib_re_nhg_free zebra/zebra_rib.c:2822
> #9 0x55910c655be2 in rib_unlink zebra/zebra_rib.c:4212
> #10 0x55910c6430f9 in zebra_rtable_node_cleanup zebra/zebra_rib.c:968
> #11 0x7f26f275b8a9 in route_node_free lib/table.c:75
> #12 0x7f26f275bae4 in route_table_free lib/table.c:111
> #13 0x7f26f275b749 in route_table_finish lib/table.c:46
> #14 0x55910c65db17 in zebra_router_free_table zebra/zebra_router.c:191
> #15 0x55910c65dfb5 in zebra_router_terminate zebra/zebra_router.c:244
> #16 0x55910c4f40db in zebra_finalize zebra/main.c:249
> #17 0x7f26f2777108 in event_call lib/event.c:2011
> #18 0x7f26f264180e in frr_run lib/libfrr.c:1212
> #19 0x55910c4f49cb in main zebra/main.c:531
> #20 0x7f26f2029d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
> #21 0x7f26f2029e3f in __libc_start_main_impl ../csu/libc-start.c:392
> #22 0x55910c4b0114 in _start (/usr/lib/frr/zebra+0x1ae114)
It happens with FRR using the kernel. During shutdown, the
namespace identifier is attempted to be obtained by zebra, in an
attempt to prepare zebra dataplane nexthop messages.
projects / matthieu / frr.git / log