Donald Sharp [Wed, 8 Sep 2021 11:51:23 +0000 (07:51 -0400)]
tests: Set mask to a default value for addKernelRoute
When looking for a implied host route it is not necessary
to add the `/32` to an ip route add. As such masks
will not be set in this case. Set the value of masks
to a known good value so that when the route installation
fails the test for it actually being there will tell you
that the route is not there -vs- complaining about mask
being uninited.
Christian Hopps [Tue, 7 Sep 2021 19:44:58 +0000 (15:44 -0400)]
tests: fix xterm windows for topotests, better errors
- Fix xterm support to work, previously it mostly didn't, not it should
in all cases (i.e., single or dist mode).
- Catch when the user tries to use various window requiring topotests
features (e.g., --cli-on-error) but isn't running under supported
system (e.g., byobu/tmux/xterm), and fail the run with an explanation.
Donald Sharp [Fri, 3 Sep 2021 13:40:26 +0000 (09:40 -0400)]
zebra: Do not send a router-id of 0.0.0.0 when we don't know it yet
At startup there exists a time frame where we might not know
a particular vrf's router id. When zebra gets a request for
it let's not just blindly send whatever we have. Let's be
a bit smart and only respond with one if we have one.
The upper level protocol can wait for it to have one.
Donald Sharp [Tue, 7 Sep 2021 14:10:50 +0000 (10:10 -0400)]
ospfd: Don't allocate json memory unless we have json output
Several functions in ospf_vty.c were allocating json memory
irrelevant if it was needed or not and then at the end of the loop
free'ing it if it was not used. Clean up the access pattern.
Donald Sharp [Tue, 7 Sep 2021 13:40:12 +0000 (09:40 -0400)]
bgpd: Fix usage of JSON_C_TO_STRING_NOSLASHESCAPE
The usage of json_object_to_json_string_ext is mean for
generation of output string and returns a `char *` pointer
to the `formatted` output. Just calling it does nothing
and it's expensive to boot.
Modify the code in bgpd to just output with the NOSLASHESCAPE
when outputting.
Donald Sharp [Tue, 7 Sep 2021 13:36:39 +0000 (09:36 -0400)]
ospfd: Fix usage of JSON_C_TO_STRING_NOSLASHESCAPE
The usage of json_object_to_json_string_ext is meant for
generation of output string and returns a `char *` pointer
to the `formatted` output. Just calling it does nothing
and it's expensive to boot.
Modify the code in ospfd to just output with the NOSLASHESCAPE
when outputting.
Create a pid file for the router created by topotest.
By executing nsenter directly against this pid, developers
can execute commands directly from outside the unet shell.
This allows the developer to use script, tab completion, etc.,
and improves efficiency.
Christian Hopps [Sun, 5 Sep 2021 09:41:04 +0000 (05:41 -0400)]
tests: speed up bgp_auth test (24m -> 12m)
- Reduce OSPF timers to 1 and 4
- Reduce BGP connect timer to 5
- Apply configs in parallel as single file
- Remove the switches as all links are p2p, perhaps this will help with
reliability?
Christian Hopps [Wed, 18 Aug 2021 17:03:42 +0000 (13:03 -0400)]
tests: remove unneeded mcast group kernel routes and sysctl
- The PIM tests do not need kernel routes to help them bind joins and
sources to specific interfaces. They should do that themselves directly.
Also do not change system wide "rp_filter" sysctl away from the value
required by everyone else.
Problem Statement :
===================
LSA with InitialSequenceNumber is not originated
after MaxSequenceNumber.
ANVL Test case 25.33 states:
============================
As soon as this flooding of a LSA with LS sequence number
MaxSequenceNumber has been acknowledged by all adjacent neighbors,
a new instance can be originated with sequence number of InitialSequenceNumber.
RCA :
=====
DUT did not originated LSA with INITIAL_SEQUENCE number even
after receiving ACK for max sequence LSA.
Code is not present to handle this situation in the lsa ack flow.
Fix :
=====
Add code to originate LSA with initial sequence number in the
LSA ack flow in case of wrap around sequence number.
ospfd: ANVL Test case 25.22, 25.23 and 28.11 fixes
ANVL Test case 28.11
If the database copy has LS age equal to MaxAge and LS sequence number
equal to MaxSequenceNumber, simply discard the received LSA
without acknowledging it.
ANVL Test Case 25.22
When an attempt is made to increment the sequence number past the maximum
value of N - 1 (0x7fffffff; also referred to as MaxSequenceNumber),
the current instance of the LSA must first be flushed from the routing domain.
ANVL Test Case 25.23
As soon as this flooding of a LSA with LS sequence number MaxSequenceNumber
has been acknowledged by all adjacent neighbors, a new instance can be
originated with sequence number of InitialSequenceNumber.
RCA:
When IXIA sent LS Seq num as MAX and LS Age as (MAX - 3),
DUT dropped the packet instead of sending ACK.
In function ospf_ls_upd, at Line 2106 the code is there to drop the LSA.
Hence its failing.
Fix:
LSAs ACK must be sent when received LSA is having max sequence number
but not max-aged.
Considering /* CVE-2017-3224 */ issue, have corrected the existing
code to prevent attacker from sending LSAs with max sequence number
and higher checksum and blocking the flooding of the Max-sequence numbered LSAs.
ospfd: GR Conformance fix for Hello packet DR election
Problem Statement:
===================
DUT selecting itself as DR when RR goes for reload.
Test Case 7.2
DUT (GR Helper) receives the Hello packet from the OSPF GR RESTARTER
(ANVL here) with DR and BDR set to 0.0.0.0 and DUT in its hello
neighbor list. DUT triggers the DR and BDR election although it is
in the Helper mode for that neighbor.
Root Cause Analysis:
====================
When hello packet is received with self router ID in the neighbor list,
there is no check in the code to handle this scenario. Hence the DR/BDR
election happens and it changes the DR although it is helper.
Fix:
===================
As per RFC 3623 Section 3. Operation of Helper Neighbor, below point,
we need to maintain the DR relationship.
Also, if X was the Designated Router on network segment S when the
helping relationship began, Y maintains X as the Designated Router
until the helping relationship is terminated.
Adding the check when DUT is under neighbor helper mode, we need to avoid
ISM state change when hello packet is received with DR/BDR set to 0.0.0.0.
Donald Sharp [Fri, 3 Sep 2021 11:56:35 +0000 (07:56 -0400)]
bgpd: Add `PEER_DOWN_SOCKET_ERROR` to the list of peer failure modes
BGP can experience a bunch of errors associated with sockets
being manipulated which would prevent the peer from coming up.
Let's add some additional debug information here so that
our operators can do a bit more for themselves.
ospfd: Memory Leak seen at show_ip_ospf_neighbor_all_common.
Problem Statement:
==================
Memory Leak seen at show_ip_ospf_neighbor_all_common (ospf_vty.c:4635)
RCA:
=================
In function show_ip_ospf_neighbor_all_common, one child json object is not
added to the parent child object when there is no nbma neighbor. Hence
the memory leak.
Fix:
=================
Add the child object to the parent json object.
This works for both tcp and ssh connections. In case the source
address is not available yet, the rpki retry interval will retry
in a defined amount of time.
Rtrlib library is the library in charge of the binding of the
tcp/ssh connection, and applies the getaddrinfo() and bind()
operations to the passed parameter bindaddr to the respective
tcp_config/ssh_config structures.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Donald Sharp [Thu, 2 Sep 2021 12:53:19 +0000 (08:53 -0400)]
bgpd: Add some debug events for when things go wrong
As it stands there are cases where FRR is silently handling
error events and not giving any log output to say what is
going wrong. This should be fixed.
Igor Ryzhov [Thu, 2 Sep 2021 12:29:18 +0000 (15:29 +0300)]
bgpd: fix bgp_get_bound_name to handle views better
The vrf socket code needs a interface/vrf name to be passed
in, in order for it to properly bind to the correct vrf.
In the case where bgp is using a view based instance
the bgp_get_bound_name should handle views better and
not return anything to be bound to.
Fixes #9519. Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
projects / mirror / frr.git / log