Donald Sharp [Thu, 7 Jun 2018 23:51:13 +0000 (19:51 -0400)]
bgpd, lib, ospf6d, vtysh: fix possible snprintf possible truncation
With a new version of clang 6.0, the compiler is detecting more
issues where we may be possibly be truncating the output string.
Fix by increasing the size of the output string to make the compiler
happy.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Donald Sharp [Thu, 7 Jun 2018 21:10:38 +0000 (17:10 -0400)]
bgpd: Actually display labeled unicast routes received
The labeled unicast and unicast tables have been combined
into the unicast table. Additionally we have a restriction
where if you configure labeled unicast you cannot configure
unicast. This created a bug with 'show bgp ipv4 labeled-unicast summ'
command where we were displaying NoNeg, because v4 has been intentionally
turned off.
Modify the code so that when we are looking up if we have negotiated
a capapbility we use the correct one, while still using the appropriate
table for prefix count.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Renato Westphal [Thu, 7 Jun 2018 18:45:33 +0000 (15:45 -0300)]
zebra: remove unnecessary preprocessor check
The IFLA_INFO_SLAVE_KIND constant is always defined now that we imported
our own copies of the Linux kernel headers. Remove the preprocessor
checks since they aren't necessary anymore.
Donald Sharp [Wed, 6 Jun 2018 17:33:19 +0000 (13:33 -0400)]
bgpd: Collapse bgp_aggregate_add into bgp_aggregate_route
These two functions are functionally the same, except
bgp_aggregate_route is meant to handle the addition and
deletion of routes, while aggregate_add is meant for all of them.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Donald Sharp [Wed, 6 Jun 2018 17:13:00 +0000 (13:13 -0400)]
bgpd: Allow bgp to know when to actually add/delete agg route
The aggregated route was being sent in updates to peers every
time a route changed that we were aggregating. Modify
the code such that we only send aggregated route updates
if we actually have something different to tell the peer.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Donald Sharp [Wed, 6 Jun 2018 16:31:17 +0000 (12:31 -0400)]
bgpd: Seperate out install/removal of aggregate from delete function
This is a transitional commit, to get us where we want to go.
Seperate out the install/removal of the aggregate route from
the bgp_aggregate_delete and bgp_aggregate_route functions.
In the future we'll write a bit of code to determine if the
aggregate add has actually changed any information we care
about.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Arthur Jones [Wed, 6 Jun 2018 14:47:17 +0000 (07:47 -0700)]
tests/isisd: bypass test_fuzz_isis_tlv when inet_ntop is broken
On Alpine Linux edge, musl does not seem to be RFC 5952 4.2.2
compliant (how to print a single :0: in the IPv6 address). Let's
skip that test, as we get false negatives when running against
that version of musl.
Credit for the idea for the fix and how to fix it is due to
chris@opensourcerouting.org.
Testing done:
make check on alpine linux passes now
Issue: https://github.com/FRRouting/frr/issues/2375 Signed-off-by: Arthur Jones <arthur.jones@riverbed.com>
Donald Sharp [Fri, 1 Jun 2018 18:19:12 +0000 (14:19 -0400)]
bgpd: Trust the bgp_table_top_nolock for aggregates
The safi passed in to short-circuit the aggregate lookup
adds code complexity and little speed improvements for
the case where we actually may have aggregates configured!
Since bgp_table_top_nolock() actually tells us if there
are any aggregates installed and safely returns if there
is nothing to do, trust it. As that we know for those
safi's were we don't want to have, we dissallow the
creation via the cli anyways.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Donald Sharp [Fri, 1 Jun 2018 18:13:58 +0000 (14:13 -0400)]
bgpd: Cleanup bgp_aggregate_set/unset to not worry about safi so much
The bgp_aggregate_set/unset functions are only called from the cli
invocations which control what AFI/SAFI we are looking at. Tests
for safi are unimportant.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Donald Sharp [Fri, 1 Jun 2018 00:51:43 +0000 (20:51 -0400)]
ospfd: Note that we do not care about self origination in this case
When we first get a packet, we need to know if we are self
originated later to make correct decisions. Go ahead and
note that we do not plan to make any decision points
about our self origination here.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Donald Sharp [Thu, 31 May 2018 16:56:21 +0000 (12:56 -0400)]
bgpd: Actually release peer from bgp_peer hash
When we are determining the state of a peer, we sometimes
detect that we should update the peer->su. The bgp->peer_hash
keeps a hash of peers based upon the peer->su. This requires
us to release the stored value before we re-insert it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Renato Westphal [Sun, 3 Jun 2018 01:00:32 +0000 (22:00 -0300)]
build: append -std=gnu99 after SNMP_CFLAGS
Programs that link to libnetsnmp must be compiled using a special set
of flags as specified by the "net-snmp-config --base-cflags" command
(whose output is stored in the SNMP_CFLAGS variable). The problem is
that "net-snmp-config --base-cflags" can output -std=c99 in addition to
other compiler flags in some platforms, and this breaks the build since
FRR souce code makes use of some GNU compiler extensions (e.g. allow
trailing commas in function parameter lists). In order to solve this
problem, append -std=gnu99 after SNMP_CFLAGS in all makefiles where this
variable is used. This way the -std=c99 flag will be overwritten when it's
present. Source files that don't link to libnetsnmp will be compiled using
either -std=gnu99 or -std=gnu11 depending on the compiler availability.
Quentin Young [Fri, 1 Jun 2018 19:25:03 +0000 (19:25 +0000)]
vtysh: fix potential stack buffer overflow
If vtysh was instructed to perform line-by-line processing on the output
of a command executed against a daemon and this output, as received by
vtysh, was not terminated with a newline, vtysh could print contents of
memory to its output device.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Donald Sharp [Fri, 1 Jun 2018 19:03:57 +0000 (15:03 -0400)]
bgpd: Deprecate and hide the `no bgp multiple-instance` command
This command needs to be deprecated. It partially implements
a refusal to create multiple instances. If you do not need
multiple instances, just don't create them in the cli instead.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Philippe Guibert [Thu, 17 May 2018 13:34:51 +0000 (15:34 +0200)]
zebra: keep one command to handle vty with/without table param
That fix is a workaround from a vtysh limitation.
Because table identifier should be accessible in configuration only for
vrf netns backends, there was a need to differentiate the vty commands.
Unfortunately, vtysh parses the two commands without knowing which
command has really been installed.
Using one single vty command will avoid having this issue in vtysh.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Philippe Guibert [Wed, 28 Mar 2018 08:46:14 +0000 (10:46 +0200)]
zebra: table_id election with the vrf backend
As table_id for VRF with netns backend is main table ( RT_TABLE_MAIN or
zebrad.rtm_table_default), this makes possible to return the table id
that wants to be configured for those cases. ( in addition to default
VRF). In other cases ( VRF Lite presumably), then vrf table_id is
returned.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Philippe Guibert [Wed, 30 May 2018 09:46:13 +0000 (11:46 +0200)]
doc: replace 'intact' keyword with something more clear
Keeping the config intact might be misunderstood. I say that even if VRF
netns is automatically discovered, it is possible for administrator to
save the netns information in the config file, to bring more clarity (
hence the config commands available).
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Philippe Guibert [Wed, 30 May 2018 09:38:24 +0000 (11:38 +0200)]
doc: inform the diff between config from zebra and outside
To avoid some confusions, it is precised in the documentation that
the configuration not done from zebra will not be injected in the
configuration context. As consequence, the config file will not be
impacted by underlying network context. But also, this will not be
possible for *Zebra* to attempt to modify outside networking objects.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Donald Sharp [Wed, 30 May 2018 22:17:17 +0000 (18:17 -0400)]
bgpd: Lock originating bgp pointer for vrf route leaking
There exists cases where we will attempt to hard delete
the bgp instance( say a `no router bgp` is issued )
when we have vrf route leaking. If we do have this
lock the bgp instance of the originator and do not
let it be deleted out from under us until we are
finished processing.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Donald Sharp [Thu, 31 May 2018 13:37:34 +0000 (09:37 -0400)]
bgpd: Fix SA issue with uninited ifindex value
The rearrangement of where the decision point of
filling in the aggregate information, must have allowed
SA to find a path of code where we may use ifindex uninitialized.
While I don't think this is possible to happen, make this issue
go away.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Donald Sharp [Wed, 30 May 2018 13:37:03 +0000 (09:37 -0400)]
bgpd: Notice when peer_clear fails
Issue Found by Coverity Scan. When we call peer_clear we
are checking the return code in every other call. Add
a bit of extra code to notice the failure and note it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Donald Sharp [Thu, 17 May 2018 11:58:02 +0000 (07:58 -0400)]
redhat: Make watchfrr the default
With systemd being the default on more systems now, lets
configure watchfrr to start else systemd systems on
redhat will not stay up for more than 1 minute.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
projects / mirror / frr.git / log