Nathan Bahr [Wed, 19 Mar 2025 16:07:37 +0000 (16:07 +0000)]
lib: Create VRF if needed
When creating a control plane protocol through NB, create the vrf
if needed instead of only looking up and asserting if it doesn't
exist yet.
Fixes 18429.
Rajasekar Raja [Tue, 11 Mar 2025 19:15:32 +0000 (12:15 -0700)]
zebra: Fix reinstalling nexthops in NHGs upon interface flaps
Trigger:
Imagine a route utilizing an NHG with six nexthops (Intf swp1-swp6).
If interfaces swp1-swp4 flaps, the NHG remains the same but now only
references two nexthops (swp5-6) instead of all six. This behavior
occurs due to how NHGs with recursive nexthops are managed within Zebra.
In the scenario below, NHG 370 has all six nexthops installed in the
kernel. However, Zebra maintains a list of recursive NHGs that NHG 370
references i.e., Depends: (371), (372), (373) which are not directly
installed in the kernel.
- When an interface comes up, its nexthop and corresponding dependents
are installed.
- These dependents (counterparts to 371-373) are non-recursive and
are installed as well.
- However, when attempting to install the recursive ones in
zebra_nhg_install_kernel(), they resolve to the already installed
counterparts, resulting in a NO-OP.
Fixing this by iterating all dependents of the recursively resolved
NHGs and reinstalling them.
Trigger: Flap swp1 to swp4
Before Fix:
root@leaf-11:mgmt:/var/home/cumulus# ip route show | grep 6.0.0.5
6.0.0.5 nhid 370 proto bgp metric 20
ip -d next show
id 337 via 2000:1:0:1:0:f:0:9 dev swp6 scope link proto zebra
id 339 via 2000:1:0:1:0:e:0:9 dev swp5 scope link proto zebra
id 341 via 2000:1:0:1:0:8:0:8 dev swp4 scope link proto zebra
id 343 via 2000:1:0:1:0:7:0:8 dev swp3 scope link proto zebra
id 346 via 2000:1:0:1:0:1:0:7 dev swp2 scope link proto zebra
id 348 via 2000:1:0:1::7 dev swp1 scope link proto zebra
id 370 group 346/348/341/343/337/339 scope global proto zebra
After Trigger:
root@leaf-11:mgmt:/var/home/cumulus# ip route show | grep 6.0.0.5
6.0.0.5 nhid 370 proto bgp metric 20
root@leaf-11:mgmt:/var/home/cumulus# ip -d next show
id 337 via 2000:1:0:1:0:f:0:9 dev swp6 scope link proto zebra
id 339 via 2000:1:0:1:0:e:0:9 dev swp5 scope link proto zebra
id 370 group 337/339 scope global proto zebra
After Fix:
root@leaf-11:mgmt:/var/home/cumulus# ip route show | grep 6.0.0.5
6.0.0.5 nhid 432 proto bgp metric 20
ip -d next show
id 432 group 395/397/400/402/405/407 scope global proto zebra
After Trigger
root@leaf-11:mgmt:/var/home/cumulus# ip route show | grep 6.0.0.5
6.0.0.5 nhid 432 proto bgp metric 20
root@leaf-11:mgmt:/var/home/cumulus# ip -d next show
id 432 group 395/397/400/402/405/407 scope global proto zebra
Ticket :#
Signed-off-by: Rajasekar Raja <rajasekarr@nvidia.com> Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Shbinging [Tue, 18 Mar 2025 02:35:16 +0000 (10:35 +0800)]
babled: set wired/wireless internal only when wired/wireless status changes
As stated in doc, interface's attributes such noninterfering/interfering are reset when the wired/wireless status of an interface is changed. If wired/wireless status is not changed, such as wired->wired, we should not reset internal attributes.
Donatas Abraitis [Thu, 27 Feb 2025 14:08:21 +0000 (16:08 +0200)]
bgpd: Do not keep stale paths in Adj-RIB-Out if not addpath aware
```
munet> r1 shi vtysh -c 'show ip bgp update advertised-routes'
update group 1, subgroup 1
BGP table version is 5, local router ID is 192.168.137.1
Status codes: s suppressed, d damped, h history, u unsorted, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.0.0.0/24 192.168.137.201 10 0 65200 65444 i
*> 10.0.0.0/24 192.168.137.100 10 0 65100 65444 65444 i
*> 10.65.10.0/24 192.168.137.100 0 10 0 65100 i
*> 10.200.2.0/24 192.168.137.202 0 10 0 65200 i
```
Announce one more 10.0.0.0/24 via 65200 and we have TWO paths 10.0.0.0/24 in adj-rib-out:
```
munet> r1 shi vtysh -c 'show ip bgp update advertised-routes'
update group 1, subgroup 1
BGP table version is 6, local router ID is 192.168.137.1
Status codes: s suppressed, d damped, h history, u unsorted, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.0.0.0/24 192.168.137.201 10 0 65200 65444 i
*> 10.0.0.0/24 192.168.137.100 10 0 65100 65444 65444 i
*> 10.0.0.0/24 192.168.137.201 10 0 65200 65444 i
*> 10.65.10.0/24 192.168.137.100 0 10 0 65100 i
*> 10.200.2.0/24 192.168.137.202 0 10 0 65200 i
```
Stop announcing 10.0.0.0/24 via 65200 and we still have TWO paths for 10.0.0.0/24...
```
munet> r1 shi vtysh -c 'show ip bgp update advertised-routes'
update group 1, subgroup 1
BGP table version is 7, local router ID is 192.168.137.1
Status codes: s suppressed, d damped, h history, u unsorted, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.0.0.0/24 192.168.137.201 10 0 65200 65444 i
*> 10.0.0.0/24 192.168.137.100 10 0 65100 65444 65444 i
*> 10.0.0.0/24 192.168.137.201 10 0 65200 65444 i
*> 10.65.10.0/24 192.168.137.100 0 10 0 65100 i
*> 10.200.2.0/24 192.168.137.202 0 10 0 65200 i
```
Why do we need to keep old paths in adj-rib-out if we don't have e.g. AddPaths enabled?
Shouldn't it be like here? (only one 10.0.0.0/24 in adj-rib-out for this update-group instead of multiple (stale from previous announcements))
```
munet> r1 shi vtysh -c 'show ip bgp update advertised-routes'
update group 1, subgroup 1
BGP table version is 6, local router ID is 192.168.137.1
Status codes: s suppressed, d damped, h history, u unsorted, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.0.0.0/24 192.168.137.201 10 0 65200 65444 i
*> 10.0.0.0/24 192.168.137.201 10 0 65200 65444 i
*> 10.65.10.0/24 192.168.137.100 0 10 0 65100 i
*> 10.200.2.0/24 192.168.137.202 0 10 0 65200 i
```
Dmytro Shytyi [Mon, 10 Mar 2025 13:59:34 +0000 (14:59 +0100)]
bgpd: align peer_unconfigure with gracefull-restart
When configured Graceful-Restart, skipping unconfig notification,
similarly as it is done in 95098d9611e79d43b578400bb76dc7a76aa8cab9
("bgpd: Do not send Deconfig/Shutdown message when restarting")
bgpd: fix radv interface disabled when bgp instance removed
If a peer uses radv for an interface, and bgp instance is removed,
then the radv service is not disabled on the interface.
Fix this by doing the same at BGP unconfiguration. Like it has been
done when a peer is unconfigured, call the radv unregistration before
deleting the peer.
Fixes: b3a3290e2303 ("bgpd: turn off RAs when numbered peers are deleted") Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com> Signed-off-by: Dmytro Shytyi <dmytro.shytyi@6wind.com>
echken [Mon, 17 Mar 2025 03:43:19 +0000 (03:43 +0000)]
fix(vrrp): display vrrp version by default
Make the VRRP version information always visible in the running
configuration output, regardless of whether it's the default value
(version 3) or not.
When using frr-reload.py to apply configuration changes, VRRP instances
were being unnecessarily reinitialized even when no actual configuration
changes were made. This occurred because:
The cli_show_vrrp function in vrrpd/vrrp_vty.c does not display the VRRP
version in the show running-config output when it's the default value
(version 3).
Configuration files often explicitly specify vrrp X version 3 even
though it's the default.
When frr-reload.py compares the explicit configuration with the running
configuration, it detects a difference and generates commands to remove
and recreate the VRRP instance.
This patch modifies the cli_show_vrrp function to unconditionally
display the VRRP version, regardless of whether it's the default value
or the show_defaults parameter is set. By making the version information
explicit in all cases, we ensure consistent configuration comparison in
frr-reload.py, preventing unnecessary VRRP reinitialization and
associated network disruptions.
Christian Hopps [Sat, 15 Mar 2025 04:09:29 +0000 (04:09 +0000)]
tests: deal with configure overridden timestamp prec in unit test
Previously if you configured a different timestamp precision then
`make check` would fail as the non-default config is generated and
fails test_cli config file comparison.
Donald Sharp [Fri, 14 Mar 2025 18:50:59 +0000 (14:50 -0400)]
bgpd: Remove unnecessary stream_new/stream_copies in bgp_open_make
The call into bgp_open_capability can return that it wrote more
than BGP_OPEN_NON_EXT_OPT_LEN bytes, in that case the open
part needs to be written again with ext_opt_params set to
true to allow extended parameters to be written thus keeping
the len < 255 bytes. The code to do this was first creating
a new stream and then copying into it the stream, trying
to call bgp_open_capability() and if it succeeded recopying
the tmp stream back onto the original.
Let's change this around such that we save the current spot
in the stream of where we are writing and if the change does
not work reset the pointer and try again with the correct
parameter. This removes the stream and multiple copies and
eventual free of the temporary stream.
Acee Lindem [Fri, 14 Mar 2025 16:02:28 +0000 (16:02 +0000)]
ospf6d: Disable and delete OSPFv3 areas that no longer have interfaces or configuration.
This fix will delete an OSPFv3 area when all the interfaces and
configuration (ranges, NSSA ranges, stub area, NSSA area, filter-list,
import-list and export-list) have been removed. The changes provides
a general solution to https://github.com/FRRouting/frr/issues/18324.
Manpreet Kaur [Thu, 13 Mar 2025 11:14:24 +0000 (04:14 -0700)]
bgpd: Fixed crash upon bgp network import-check command
BT:
```
3 <signal handler called>
4 0x00005616837546fc in bgp_static_update (bgp=bgp@entry=0x5616865eac50, p=0x561686639e40,
bgp_static=0x561686639f50, afi=afi@entry=AFI_IP6, safi=safi@entry=SAFI_UNICAST) at ../bgpd/bgp_route.c:7232
5 0x0000561683754ad0 in bgp_static_add (bgp=0x5616865eac50) at ../bgpd/bgp_table.h:413
6 0x0000561683785e2e in no_bgp_network_import_check (self=<optimized out>, vty=0x5616865e04c0,
argc=<optimized out>, argv=<optimized out>) at ../bgpd/bgp_vty.c:4609
7 0x00007fdbcc294820 in cmd_execute_command_real (vline=vline@entry=0x561686663000,
```
The program encountered a SEG FAULT when attempting to access pi->extra->vrfleak->bgp_orig because
pi->extra->vrfleak was NULL.
```
(gdb) p pi->extra->vrfleak
$1 = (struct bgp_path_info_extra_vrfleak *) 0x0
(gdb) p pi->extra->vrfleak->bgp_orig
Cannot access memory at address 0x8
```
Added NOT NULL check on pi->extra->vrfleak before accessing pi->extra->vrfleak->bgp_orig
to prevent the segmentation fault.
Donald Sharp [Thu, 13 Mar 2025 19:19:02 +0000 (15:19 -0400)]
bgpd: Show bgp <afi> <safi> shouldn't display peers in groups
The command `show bgp <afi> <safi>` has this output:
r1# show bgp ipv4 uni 10.0.0.0
BGP routing table entry for 10.0.0.0/32, version 1
Paths: (1 available, best #1, table default)
Advertised to non peer-group peers:
r1-eth0 r1-eth1 r1-eth2 r1-eth3
....
It specifically states `Advertised to non peer-group peers:` yet
the code is not filtering those out.
Gabriel Goller [Thu, 13 Mar 2025 11:11:34 +0000 (12:11 +0100)]
isisd: fix bit flag collision in options field
Resolve conflict between F_ISIS_UNIT_TEST and ISIS_OPT_DUMMY_AS_LOOPBACK
which were both using the same bit value (0x01). This collision caused
unit test mode to be unintentionally enabled when DUMMY_AS_LOOPBACK was set.
Signed-off-by: Gabriel Goller <g.goller@proxmox.com>
This commit is being reverted because of several issues:
a) tcpdump -i <any interface that bgp happens to use>
This command causes bgp to dump it's entire table to all
of it's peers again. This is a huge problem in any type
of scaled environment *and* it is not unusual to have an
operator do this.
b) This commit appears to be attempting to solve the problem
with route leaking across vrf's using labels( or somesuch ).
Unfortunately we have absolutely no topotests that show the
behavior. I am also unable to get any type of how to reproduce
the problem being solved by the commit. I do know, though,
that the problem really stems from the fact that bgp has
decided to cheat and not create bnc's for route leaking.
Thus when a nexthop changes, bgp is not being notified.
This commit was being used as a hammer to solve the problem.
While I do agree backing out a bug fix for some operator
is less then ideal, I believe that since I cannot get the
operator to tell me the problem it solved and the fact
that sending large amounts of updates with just a simple
tcpdump command ( actually 2 one for tcpdump start and
one for finishing ) is more detrimental in my eyes at
this point in time. Additionally the solution used
is the wrong one for the problem.
Donald Sharp [Wed, 12 Mar 2025 12:30:43 +0000 (08:30 -0400)]
staticd: Install known nexthops upon connection with zebra
CI tests are showing cases where staticd is connecting to
zebra after config is read in and the nexthops are never
being registered w/ zebra:
2025/03/11 15:39:44 STATIC: [T83RR-8SM5G] staticd 10.4-dev starting: vty@2616
2025/03/11 15:39:45 STATIC: [GH3PB-C7X4Y] Static Route to 13.13.13.13/32 not installed currently because dependent config not fully available
2025/03/11 15:39:45 STATIC: [RHJK1-M5FAR] static_zebra_nht_register: Failure to send nexthop 1.1.1.2/32 for 11.11.11.11/32 to zebra
2025/03/11 15:39:45 STATIC: [M7Q4P-46WDR] vty[14]@> enable
Zebra shows connection time as:
2025/03/11 15:39:45.933343 ZEBRA: [V98V0-MTWPF] client 5 says hello and bids fair to announce only static routes vrf=0
As a result staticd never installs the route because it has no nexthop
tracking to say that the route could be installed.
Modify staticd on startup to go through it's nexthops and dump them to
zebra to allow the staticd state machine to get to work.
Issue:
Not freeing the neighbor n within the same function can lead to
memory leak.
zebra_neigh_del_all() -> zebra_neigh_del() re lookup and free
Fix: not accessing n after its freed.
Directly free the neighbor entry (n) when its interface index matches
ifp->ifindex.
This fixes:
ERROR: AddressSanitizer: heap-use-after-free on address 0x6070001052e8 at pc 0x7f6bf7d09ddb bp 0x7ffd3366a000 sp 0x7ffd33669ff0
READ of size 8 at 0x6070001052e8 thread T0
#0 0x7f6bf7d09dda in _rb_next lib/openbsd-tree.c:455
#1 0x55f95a307261 in zebra_neigh_rb_head_RB_NEXT zebra/zebra_neigh.h:34
#2 0x55f95a3082e9 in zebra_neigh_del_all zebra/zebra_neigh.c:162
#3 0x55f95a121ee7 in zebra_interface_down_update zebra/redistribute.c:571
#4 0x55f95a0f819d in if_down zebra/interface.c:1017
#5 0x55f95a0fe168 in zebra_if_dplane_ifp_handling zebra/interface.c:2102
#6 0x55f95a0ff10c in zebra_if_dplane_result zebra/interface.c:2241
#7 0x55f95a27ce9c in rib_process_dplane_results zebra/zebra_rib.c:5015
#8 0x7f6bf7da3ad9 in event_call lib/event.c:1984
#9 0x7f6bf7c62141 in frr_run lib/libfrr.c:1246
#10 0x55f95a11ca7f in main zebra/main.c:543
#11 0x7f6bf7029d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
#12 0x7f6bf7029e3f in __libc_start_main_impl ../csu/libc-start.c:392
#13 0x55f95a0dd0b4 in _start (/usr/lib/frr/zebra+0x1a80b4)
Rajasekar Raja [Mon, 10 Mar 2025 22:26:38 +0000 (15:26 -0700)]
zebra: ensure proper return for failure for Sid allocation
The functions alloc_srv6_sid_func_explicit/dynamic expect to return bool
but we have places where we return a -1 or NULL which the caller is
assuming as a True/Valid and ending up allocating Sid
Without Fix:
2025/03/10 21:44:04.295350 ZEBRA: [XWV20-TGK70] alloc_srv6_sid_func_explicit: trying to allocate explicit SID function 65088 from block fcbb:bbbb::/32
2025/03/10 21:44:04.295351 ZEBRA: [MM61M-TQZNP] alloc_srv6_sid_func_explicit: elib s 10000 e 20000 wlib s 1000 ewlib s 30000 e 1000 SID_FUNC 65088
2025/03/10 21:44:04.295352 ZEBRA: [QGHMB-SWNFW] alloc_srv6_sid_func_explicit: function 65088 is outside ELIB [10000/20000] and EWLIB alloc ranges [30000/1000]
2025/03/10 21:44:04.295367 ZEBRA: [H0GZA-NNSWJ] get_srv6_sid_explicit: allocated explicit SRv6 SID fcbb:bbbb:1:fe40:: for context End.X nh6 2001::2
2025/03/10 21:44:04.295368 ZEBRA: [XBBYD-T1Q7P] srv6_manager_get_sid_internal: got new SRv6 SID for ctx End.X nh6 2001::2: sid_value=fcbb:bbbb:1:fe40:: (func=65088) (proto=4, instance=0, sessionId=0), notifying all clients
With Fix:
2025/03/10 22:04:25.052235 ZEBRA: [MM61M-TQZNP] alloc_srv6_sid_func_explicit: elib s 30000 e 31000 wlib s 31000 ewlib s 30000 e 31000 SID_FUNC 65056
2025/03/10 22:04:25.052236 ZEBRA: [YHMRC-EMYNX] alloc_srv6_sid_func_explicit: function 65056 is outside ELIB [30000/31000] and EWLIB alloc ranges [30000/31000]
2025/03/10 22:04:25.052254 ZEBRA: [XSG8X-Q2XJX] get_srv6_sid_explicit: invalid SM request arguments: failed to allocate SID function 65056 from block fcbb:bbbb::/32
2025/03/10 22:04:25.052257 ZEBRA: [YC52T-427SJ] srv6_manager_get_sid_internal: not got SRv6 SID for ctx End.DT6 vrf_id 4, sid_value=fcbb:bbbb:1:fe20::, locator_name=MAIN
root@rajasekarr:/tmp/topotests/static_srv6_sids.test_static_srv6_sids/r1#
Ticket :# Signed-off-by: Rajasekar Raja <rajasekarr@nvidia.com>
Louis Scalbert [Mon, 23 Sep 2024 15:23:51 +0000 (17:23 +0200)]
lib, tests, zebra: keep table routes at vrf disabling
At VRF disabling, keep the route entries that was associated to its
table ID but not to the VRF itself. Kernel flushes these entries so we
need to reinstall them.
To do so, add a flag to mean that a route entry is owned by a table ID
and not by a VRF. If the VRF associated to the table ID is deleted, the
route entry must not be deleted.
Update to tests with new flag. 2057 is in hexa 0x809, meaning that the
new flag has been to some prefix.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Louis Scalbert [Thu, 22 Aug 2024 09:12:29 +0000 (11:12 +0200)]
zebra: remove vrf route entries at vrf disabling
This is the continuation of the previous commit.
When a VRF is deleted, the kernel retains only its own routing entries
in the former VRF table and removes all others.
This change ensures that routing entries created by FRR daemons are also
removed from the former zebra VRF table when the VRF is disabled.
To test:
> echo "100 my_table" | tee -a /etc/iproute2/rt_tables
> ip l add du0 type dummy
> ifconfig du0 192.168.0.1/24 up
> ip route add blackhole default table 100
> ip route show table 100
> ip l add red type vrf table 100
> ip l set du0 master red
> vtysh -c 'configure' -c 'vrf red' -c 'ip route 10.0.0.0/24 192.168.0.254'
> vtysh -c 'show ip route table 100'
> sleep 0.1
> ip l del red
> sleep 0.1
> vtysh -c 'show ip route table 100'
> ip l add red type vrf table 100
> ip l set du0 master red
> vtysh -c 'configure' -c 'vrf red' -c 'ip route 10.0.0.0/24 192.168.0.254'
> vtysh -c 'show ip route table 100'
> sleep 0.1
> ip l del red
> sleep 0.1
> vtysh -c 'show ip route table 100'
Fixes: d8612e6 ("zebra: Track tables allocated by vrf and cleanup") Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Louis Scalbert [Wed, 20 Nov 2024 15:33:55 +0000 (16:33 +0100)]
zebra: fix table heap-after-free crash
Fix a heap-after-free that causes zebra to crash even without
address-sanitizer. To reproduce:
> echo "100 my_table" | tee -a /etc/iproute2/rt_tables
> ip route add blackhole default table 100
> ip route show table 100
> ip l add red type vrf table 100
> ip l del red
> ip route del blackhole default table 100
Zebra manages routing tables for all existing Linux RT tables,
regardless of whether they are assigned to a VRF interface. When a table
is not assigned to any VRF, zebra arbitrarily assigns it to the default
VRF, even though this is not strictly accurate (the code expects this
behavior).
When an RT table is created after a VRF, zebra correctly assigns the
table to the VRF. However, if a VRF interface is assigned to an existing
RT table, zebra does not update the table owner, which remains as the
default VRF. As a result, existing routing entries remain under the
default VRF, while new entries are correctly assigned to the VRF. The
VRF mismatch is unexpected in the code and creates crashes and memory
related issues.
Furthermore, Linux does not automatically delete RT tables when they are
unassigned from a VRF. It is incorrect to delete these tables from zebra.
Instead, at VRF disabling, do not release the table but reassign it to
the default VRF. At VRF enabling, change the table owner back to the
appropriate VRF.
> ==2866266==ERROR: AddressSanitizer: heap-use-after-free on address 0x606000154f54 at pc 0x7fa32474b83f bp 0x7ffe94f67d90 sp 0x7ffe94f67d88
> READ of size 1 at 0x606000154f54 thread T0
> #0 0x7fa32474b83e in rn_hash_node_const_find lib/table.c:28
> #1 0x7fa32474bab1 in rn_hash_node_find lib/table.c:28
> #2 0x7fa32474d783 in route_node_get lib/table.c:283
> #3 0x7fa3247328dd in srcdest_rnode_get lib/srcdest_table.c:231
> #4 0x55b0e4fa8da4 in rib_find_rn_from_ctx zebra/zebra_rib.c:1957
> #5 0x55b0e4fa8e31 in rib_process_result zebra/zebra_rib.c:1988
> #6 0x55b0e4fb9d64 in rib_process_dplane_results zebra/zebra_rib.c:4894
> #7 0x7fa32476689c in event_call lib/event.c:1996
> #8 0x7fa32463b7b2 in frr_run lib/libfrr.c:1232
> #9 0x55b0e4e6c32a in main zebra/main.c:526
> #10 0x7fa32424fd09 in __libc_start_main ../csu/libc-start.c:308
> #11 0x55b0e4e2d649 in _start (/usr/lib/frr/zebra+0x1a1649)
>
> 0x606000154f54 is located 20 bytes inside of 56-byte region [0x606000154f40,0x606000154f78)
> freed by thread T0 here:
> #0 0x7fa324ca9b6f in __interceptor_free ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:123
> #1 0x7fa324668d8f in qfree lib/memory.c:130
> #2 0x7fa32474c421 in route_table_free lib/table.c:126
> #3 0x7fa32474bf96 in route_table_finish lib/table.c:46
> #4 0x55b0e4fbca3a in zebra_router_free_table zebra/zebra_router.c:191
> #5 0x55b0e4fbccea in zebra_router_release_table zebra/zebra_router.c:214
> #6 0x55b0e4fd428e in zebra_vrf_disable zebra/zebra_vrf.c:219
> #7 0x7fa32476fabf in vrf_disable lib/vrf.c:326
> #8 0x7fa32476f5d4 in vrf_delete lib/vrf.c:231
> #9 0x55b0e4e4ad36 in interface_vrf_change zebra/interface.c:1478
> #10 0x55b0e4e4d5d2 in zebra_if_dplane_ifp_handling zebra/interface.c:1949
> #11 0x55b0e4e4fb89 in zebra_if_dplane_result zebra/interface.c:2268
> #12 0x55b0e4fb9f26 in rib_process_dplane_results zebra/zebra_rib.c:4954
> #13 0x7fa32476689c in event_call lib/event.c:1996
> #14 0x7fa32463b7b2 in frr_run lib/libfrr.c:1232
> #15 0x55b0e4e6c32a in main zebra/main.c:526
> #16 0x7fa32424fd09 in __libc_start_main ../csu/libc-start.c:308
>
> previously allocated by thread T0 here:
> #0 0x7fa324caa037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154
> #1 0x7fa324668c4d in qcalloc lib/memory.c:105
> #2 0x7fa32474bf33 in route_table_init_with_delegate lib/table.c:38
> #3 0x7fa32474e73c in route_table_init lib/table.c:512
> #4 0x55b0e4fbc353 in zebra_router_get_table zebra/zebra_router.c:137
> #5 0x55b0e4fd4da0 in zebra_vrf_table_create zebra/zebra_vrf.c:358
> #6 0x55b0e4fd3d30 in zebra_vrf_enable zebra/zebra_vrf.c:140
> #7 0x7fa32476f9b2 in vrf_enable lib/vrf.c:286
> #8 0x55b0e4e4af76 in interface_vrf_change zebra/interface.c:1533
> #9 0x55b0e4e4d612 in zebra_if_dplane_ifp_handling zebra/interface.c:1968
> #10 0x55b0e4e4fb89 in zebra_if_dplane_result zebra/interface.c:2268
> #11 0x55b0e4fb9f26 in rib_process_dplane_results zebra/zebra_rib.c:4954
> #12 0x7fa32476689c in event_call lib/event.c:1996
> #13 0x7fa32463b7b2 in frr_run lib/libfrr.c:1232
> #14 0x55b0e4e6c32a in main zebra/main.c:526
> #15 0x7fa32424fd09 in __libc_start_main ../csu/libc-start.c:308
Fixes: d8612e6 ("zebra: Track tables allocated by vrf and cleanup") Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Donald Sharp [Fri, 7 Mar 2025 23:35:53 +0000 (18:35 -0500)]
tests: Allow mgmtd and zebra to fully come up before other daemons
Currently the topotest infrastructure is starting up daemons
in mgmtd,zebra, staticd then everything else.
The problem that is happening, under heavy load, is that
zebra may not be fully started and when a daemon attempts
to connect to it, it will not be able to connect.
Some of the daemons do not have great retry mechanisms at all.
In addition our normal systemctl startup scripts actually
wait a small amount of time for zebra to be ready before
moving onto the other daemons.
Let's make topotests startup a tiny bit more nuanced
and have mgmtd fully up before starting up zebra.
anlan_cs [Fri, 7 Mar 2025 02:05:03 +0000 (10:05 +0800)]
lib: remove unused macro
This macro is unused and it leads to the compile error:
```
./ospfd/ospf_dump.h:78:60: error: pasting "OSPF_DEBUG_" and ""Global Graceful Restart - GR Mode\n"" does not give a valid preprocessing token
78 | #define TERM_DEBUG_ON(a, b) term_debug_ospf_ ## a |= (OSPF_DEBUG_ ## b)
```
Quentin Young [Wed, 5 Mar 2025 20:15:35 +0000 (12:15 -0800)]
doc: don't override automake builtin targets
Automake generates default targets for `info`, `html`, `pdf` and
corresponding `install-info` and `install-html` targets to install the
artifacts generated by those rules. Prior to this change we are
overriding those targets which generates a warning.
The automake targets are designed to automatically build texinfo sources
without requiring user-specified rules. We do not have texinfo sources
so this functionality is not in use, but we are still overriding the
built in targets which is considered poor form. Automake has facilities
to modify the built in targets in the form of `-local` rules; this patch
renames the rules we had defined to use the `-local` ones.
The resulting targets generated by Automake look like this:
html: html-am
html-am: html-local
i.e. the final `html` target generated when using `html-local` to define
our custom rules is identical to the one we get by overriding the built
in `html` target. The same goes for the others.
So, the only effect this patch has is suppressing the warnings and
bringing us in line with Automake best practice.
projects / mirror / frr.git / log