Donald Sharp [Thu, 11 Apr 2024 14:46:46 +0000 (10:46 -0400)]
bgpd: Fix display when using `missing-as-worst`
The usage of the `bgp bestpath med missing-as-worst` command
was being accepted and applied during bestpath, but during output
of the routes affected by this it would not give any indication
that this was happening or what med value was being used.
Fixes: #15718 Signed-off-by: Donald Sharp <sharpd@nvidia.com>
bgpd: fix addressing information of non established outgoing sessions
When trying to connect to a BGP peer that does not respons, the 'show
bgp neighbors' command does not give any indication on the local and
remote addresses used:
> # show bgp neighbors
> BGP neighbor is 192.0.2.150, remote AS 65500, local AS 65500, internal link
> Local Role: undefined
> Remote Role: undefined
> BGP version 4, remote router ID 0.0.0.0, local router ID 192.0.2.1
> BGP state = Connect
> [..]
> Connections established 0; dropped 0
> Last reset 00:00:04, Waiting for peer OPEN (n/a)
> Internal BGP neighbor may be up to 255 hops away.
> BGP Connect Retry Timer in Seconds: 120
> Next connect timer due in 117 seconds
> Read thread: off Write thread: off FD used: 27
The addressing information (address and port) are only available
when TCP session is established, whereas this information is present
at the system level:
Add the display for outgoing BGP session, as the information in
the getsockname() API provides information for connected streams.
When getpeername() API does not give any information, use the peer
configuration (destination port is encoded in peer->port).
> # show bgp neighbors
> BGP neighbor is 192.0.2.150, remote AS 65500, local AS 65500, internal link
> Local Role: undefined
> Remote Role: undefined
> BGP version 4, remote router ID 0.0.0.0, local router ID 192.0.2.1
> BGP state = Connect
> [..]
> Connections established 0; dropped 0
> Last reset 00:00:16, Waiting for peer OPEN (n/a)
> Local host: 192.0.2.1, Local port: 46084
> Foreign host: 192.0.2.150, Foreign port: 179
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
bgpd: remove useless control checks about TCP connection
When attempting to get the src and destination addresses of a given
connection, the API may return the NULL pointer, but further code
in bgp_zebra_nexthop_set() already does a check about the given
pointer.
Relaxing the error code for all the returned adressing.
Fixes: 1ff9a340588a ("bgpd: bgpd-fsm-fix.patch") Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
ospfd: Fix compile warning with `-Wformat-truncation`
ospfd/ospf_sr.c: In function ‘show_sr_node.part.5’:
ospfd/ospf_sr.c:2745:32: warning: ‘%u’ directive output may be truncated writing between 1 and 10 bytes into a region of size 2 [-Wformat-truncation=]
snprintf(tmp, sizeof(tmp), "%u", i);
^~
ospfd/ospf_sr.c:2745:31: note: directive argument in the range [0, 2147483646]
snprintf(tmp, sizeof(tmp), "%u", i);
isisd: Fix compile warning with `-Wformat-truncation`
isisd/isis_spf.c: In function ‘show_isis_route_common’:
isisd/isis_spf.c:3034:39: warning: ‘%d’ directive output may be truncated writing between 1 and 10 bytes into a region of size 2 [-Wformat-truncation=]
snprintf(key, sizeof(key), "level-%d", level);
^~
isisd/isis_spf.c:3034:32: note: directive argument in the range [1, 2147483646]
snprintf(key, sizeof(key), "level-%d", level);
^~~~~~~~~~
bgpd: prompt should be given only for the real change
Prompt nothing for an empty (and failed) operation. Take
`bgp graceful-restart` as an example:
Before:
```
anlan(config-router)# bgp graceful-restart
Graceful restart configuration changed, reset all peers to take effect
anlan(config-router)# bgp graceful-restart
Graceful restart configuration changed, reset all peers to take effect
anlan(config-router)#
```
After:
```
anlan(config-router)# bgp graceful-restart
Graceful restart configuration changed, reset all peers to take effect
anlan(config-router)# bgp graceful-restart
anlan(config-router)#
```
The same command should be accepted, it is an empty operation. Take
`neighbor <X> graceful-restart-helper` as an example:
Before:
```
anlan(config-router)# neighbor 3.3.3.3 graceful-restart-helper
Graceful restart configuration changed, reset this peer to take effect
anlan(config-router)# neighbor 3.3.3.3 graceful-restart-helper
Graceful restart configuration changed, reset this peer to take effect
% The Graceful Restart command used is not valid at this moment.
anlan(config-router)#
```
After:
```
anlan(config-router)# neighbor 3.3.3.3 graceful-restart-helper
Graceful restart configuration changed, reset this peer to take effect
anlan(config-router)# neighbor 3.3.3.3 graceful-restart-helper
Graceful restart configuration changed, reset this peer to take effect
anlan(config-router)#
```
Donald Sharp [Thu, 11 Apr 2024 17:28:30 +0000 (13:28 -0400)]
bgpd: Increase install/uninstall speed of evpn vpn vni's
BGP receives notification from zebra about an vpn that
needs to be installed into the evpn tables. Unfortunately
this function was walking the entirety of evpn tables
3 times. Modify the code to walk the tree 1 time and
to just look for the needed route types as you go.
This reduces, in a scaled environment, processing
time of the zclient_read function from 130 seconds
to 95 seconds. For a up / down / up interface
scenario.
Signed-off-by: Rajasekar Raja <rajasekarr@vndia.com> Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Chirag Shah [Tue, 9 Apr 2024 00:14:48 +0000 (17:14 -0700)]
tools: frr-reload strip interface vrf ctx line
if frr.conf file contains 'interface x vrf <name> config
it causes protocol (like ospf) neighbor session flap,
as it deletes interface base config line ('interface x') from
running config and readds with 'interface x vrf <name>'
line from frr.conf.
This deletion and readdition of lines leads to neighborship
flaps.
This issue is by product of (PR-10411 | https://github.com/FRRouting/frr/pull/10411)
(commit id: 788a036fdb)
where running config for interface config no loger displays associated
vrf line.
Donald Sharp [Tue, 19 Mar 2024 23:30:41 +0000 (19:30 -0400)]
tests: Cleanup generate_support_bundle() to not fail
The Support bundle generation was/is failing in both
our upstream ci and locally. This cleans up the failures
that I am seeing such that tests now continue to run
instead of aborting the test run.
Donald Sharp [Mon, 8 Apr 2024 20:24:05 +0000 (16:24 -0400)]
zebra: Actually display I/O buffer sizes
An operator found a situation where zebra was
backing up in a significant way towards BGP
with EVPN changes taking up some serious amounts
of memory. The key lines that would have clued
us in on it were behind a dev build. Let's change
this.
isisd: The hold time of hello packets on a P2P link does not match the sending interval.
The hold time filled in the hello packets of a P2P link is calculated based on the level 1 configuration, while the hello timer is based on the level 2 configuration. If the hello interval times in level 1 and level 2 configurations are inconsistent, it may lead to neighbor establishment failure.
Dmytro Shytyi [Wed, 20 Dec 2023 15:18:32 +0000 (16:18 +0100)]
zebra: fix static srv6 segment-list sid order
When configuring a SID list by vtysh, the segment list
obtained in iproute2 is the exact opposite:
>
>vtysh:
>ipv6 route 2005::/64 eth0 segments 2001:db8:aaaa::7/2002::2/2003::3/2004::4
>
>root@r1:/# ip -6 route
>2005::/64 nhid 6 encap seg6 mode encap segs 4 [ 2004::4 2003::3 2002::2 2001:db8:aaaa::7 ] dev dummy0 proto 196 metric 20 pref medium
>
Fix this by keeping the same vtysh config and swap the
segment's order of the list in the rt_netlink.c
>
>root@r1:/# ip -6 route
>2005::/64 nhid 6 encap seg6 mode encap segs 4 [ 2001:db8:aaaa::7 2002::2 2003::3 2004::4 ] dev dummy0 proto 196 metric 20 pref medium
>
Philippe Guibert [Thu, 21 Mar 2024 15:48:52 +0000 (16:48 +0100)]
bgpd: fix install BGP route with appropriate colored ext. community
When receiving a BGP update that includes a colored extended community,
the nexthop is tracked in the bgp nexthop tracking context, but the
color is never recorded. Adding to this, the BGP route is not prevented
from being installed without hte color.
Actually, the srte color is set only when the SRTE_COLOR attribute is set.
And that attribute value is only set when an ext. community is locally
created, or an srte value is set, but not when a BGP update with a color
ext. community is received.
Fix this by setting the SRTE_COLOR attribute on this last case.
Fixes: 442e2edcfaef ("bgpd: add functions related to srte_color management") Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Philippe Guibert [Thu, 28 Mar 2024 14:56:19 +0000 (15:56 +0100)]
topotests: fix ignore routes with linkdown
In topotest, a given interface has only the ignore routes bit turned
on for IPv6 only, whereas topotest is expected to turn it on for all
address families.
> # show interface
> Interface r2-r3-eth2 is up, line protocol is up
> [..]
> flags: <UP,BROADCAST,RUNNING,MULTICAST>
> Ignore all v6 routes with linkdown
> Type: Ethernet
> [..]
This is because the only the 'default' ipv6 ignore sysctl is set to
1. Set also the /proc/sys/net/conf/<family>/default/ignore_routes_with_linkdown
flag, to have same behaviour for ipv4 and ipv6.
Fixes: 4958158787ce ("tests: micronet: update infra") Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
ospfd: Implement non-broadcast support for point-to-multipoint networks
This extends non-broadcast support to point-to-multipoint networks.
Neighbors will be explicitly configured and polled in lieu of multicast
dicovery. Toptotests and documentation updates are included.
Additionally, the ospf neighbor commands have been greatly simplified taking
advantage of DEFPY() capabilities.
The AllOSPFRouters (224.0.0.5) is still joined for non-broadcast networks
since it is joined for NBMA networks. It seems this could be removed but
it should done be in a separate commit.
projects / mirror / frr.git / log