Mark Stapp [Tue, 6 Apr 2021 19:26:51 +0000 (15:26 -0400)]
ospfd: permit over-write of message-digest-key
Allow over-write of message-digest-key interface config. Most
attributes handle multi-instance by ... ignoring instances,
and tolerating repeated config: do the same for md5 auth.
Mark Stapp [Mon, 5 Apr 2021 19:10:44 +0000 (15:10 -0400)]
zebra: be more selective about processing LSPs
When certain events occur (connected route changes e.g.)
zebra examines LSPs to see if they might have been affected. For
LSPs with backup nhlfes, skip this immediate processing and
wait for the owning protocol daemon to react.
Igor Ryzhov [Thu, 1 Apr 2021 12:42:53 +0000 (15:42 +0300)]
bbfd: clear nb config entries when removing bfd node
When bfd node is removed, we must clear all NB entries set by its
children - sessions and profiles. Let's store some fake data as an entry
for the bfd node to be able to unset it later.
bgpd: BGP session not established for ipv6 link local address with vrf config
Description:
BGP session not established for ipv6 link local address with vrf config
Problem Description/Summary :
BGP session not established for ipv6 link local address with vrf configyy
1.Configure ipv6 link-local address fe80::1234/64 on dut1 and fe80::4567/64 on dut2
2.Configure BGP neighbors for ipv6 link-local on both dut1 and dut2
3.Verify BGP session is UP over link-local ipv6 address
4.Observed that bgp session not established for ipv6 link local address
Expected Behavior :
BGP session should be established for ipv6 link local address with vrf config
avoid issuing a [no] command if we are then issuing the affirmative
one. This avoids spurious requests for the default label ranges,
which might fail if something else is using those labels.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
set_vpn_nexthop/no_set_vpn_nexthop were failing due to missing
declarations and unused variables.
This adds the missing declaration and removes unused variables.
Trey Aspelund [Tue, 9 Mar 2021 04:28:04 +0000 (04:28 +0000)]
bgpd: Add 'rd all' keyword to EVPN/L3VPN show cmds
New and improved submission for this commit -- updated to accommodate
changes from 4027d19b0.
Adds support for 'rd all' matching for EVPN and L3VPN show commands.
Introduces evpn_show_route_rd_all_macip().
Cleans up some show commands to use SHOW_DISPLAY string constants.
Don Slice [Fri, 19 Mar 2021 19:10:14 +0000 (15:10 -0400)]
tools: frr-reload fixes for deleting vrf static routes
Problems reported that in certain cases, frr-reload.py would
delete vrf static routes inadvertantly due to two different
reasons. First, vrf statics with null0 or Null0 nexthops would
fail the match since rendered as blackholes. This was already
fixed for non-vrf statics so added for vrf-based. Second,
frr-reload would fail to match due to different formats for
adding the command. If entered in the old way
"ip route x.x.x.x/x y.y.y.y vrf NAME" and rendered
in the new sway "vrf NAME\nip route x.x.x.x/x y.y.y.y" it would
fail to match do an inadvertant delete.
Ticket: 2570270 Signed-off-by: Don Slice <dslice@nvidia.com>
David Lamparter [Mon, 22 Mar 2021 09:12:42 +0000 (10:12 +0100)]
lib: add `%pSQ` and `%pSE` string escape formats
These are for string quoting (`%pSQ`) and string escaping (`%pSE`); the
sets / escape methods are currently rather "basic" and might be extended
in the future.
Signed-off-by: David Lamparter <equinox@diac24.net>
David Lamparter [Fri, 26 Mar 2021 16:58:54 +0000 (17:58 +0100)]
lib: allow discerning unspec width in printfrr ext
With 0 currently the default value for the width specifier, it's not
possible to discern that from a %*p where 0 was passed as the length
parameter. Use -1 to allow for that.
Signed-off-by: David Lamparter <equinox@diac24.net>
Sarita Patra [Fri, 30 Oct 2020 06:40:10 +0000 (23:40 -0700)]
lib,zebra,bgpd,ospfd,ospf6d: Route-map yang defns
This commit includes the following:
1) Modifications to the frr-route-map.yang to enable addition of
bgpd, ospfd, ospf6d and zebra specific route map match/set clauses.
2) Yang definitions for bgpd match/set clauses.
3) Yang definitions for ospfd and ospf6d match/set clauses.
4) Yang definitions for zebra match/set clauses.
Igor Ryzhov [Mon, 29 Mar 2021 11:47:43 +0000 (14:47 +0300)]
ospfd: fix counting of "ip ospf area" commands
Instead of trying to maintain if_ospf_cli_count, let's directly count
the number of configured interfaces when it is needed. Current approach
sometimes leads to an incorrect counter.
rgirada [Thu, 11 Feb 2021 10:05:12 +0000 (02:05 -0800)]
ospfd: Max multipath config support
Description:
OSPF does not have an option to control the maximum multiple
equal cost paths to reach a destination/route(ECMP).
Currently, it is using the system specific max multiple paths.
But Somtimes, It requires to control the multiple paths from ospf.
This cli helps to configure the max number multiple paths in ospf.
Igor Ryzhov [Mon, 29 Mar 2021 21:25:19 +0000 (00:25 +0300)]
lib: restore checks for duplicated prefix-list entries
The checks were incorrectly removed in commit 4d2f546f under the
assumption that it is needed only in CLI. Actually the checks are needed
for the case when the sequence number is explicitly set by a user.
Erik Kooistra [Mon, 29 Mar 2021 13:15:12 +0000 (15:15 +0200)]
tools: Added pathd to the relevant init files
Currently pathd is missing from the deamon list in frrcommon
with this missing frrinit can't start pathd if it is added to
the deamon file. This commit adds it to the frrcommon deamon list
and updates the example deamon file.
Rafael Zalamena [Wed, 10 Mar 2021 13:21:14 +0000 (10:21 -0300)]
topotests: add tests for OSPFv3 default route
Three new tests:
- OSPFv3 convergence using 'ipv6 ospf6 neighbor json'
- Default route functionality:
* Check that the LSA is present
* Check that the route was installed
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
projects / mirror / frr.git / log