Donald Sharp [Fri, 1 Sep 2017 14:28:19 +0000 (10:28 -0400)]
zebra: Allow zebra to delete self originated routes
With the change to make zebra pass routes to the kernel
with the 'correct' proto name, it caused zebra to
not properly recognize them on startup again
the next time such that the route would not
be deleted.
Modify rt_netlink.c to notice that we have a
self originated route and to properly mark
the type of route it was.
Modify rib_table_sweep to mark the nexthops
as active so that when we go to delete the
self originated routes it would properly
delete from the kernel.
Fixes: #1061 Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If we configure a static route pointing to null0 and zebra displays
it with the 'blackhole' keyword in the running configuration, the
frr-reload.py script will have issues. Fix this by introducing the
'static_blackhole_type' enum.
zebra: add an exception for link-local connected routes
Link-local routes are unique in the sense that they all have the same
prefix but have different nexthops (local interfaces). Add an exception
in rib_add() to allows us to keep track of all of them.
Renato Westphal [Thu, 31 Aug 2017 20:28:05 +0000 (17:28 -0300)]
zebra: fix detection of duplicate system routes
Fixes the following bugs:
1)
% ip -6 route add 5000::/64 via 3000::2
% ip -6 route replace 5000::/64 via 3000::2
% ip -6 route replace 5000::/64 via 3000::2
% ip -6 route replace 5000::/64 via 3000::2
% ip -6 route replace 5000::/64 via 3000::2
%
% vtysh -c "show ipv6 route"
[snip]
K * 5000::/64 [0/1024] via 3000::2, rt1-eth0
K * 5000::/64 [0/1024] via 3000::2, rt1-eth0
K * 5000::/64 [0/1024] via 3000::2, rt1-eth0
K * 5000::/64 [0/1024] via 3000::2, rt1-eth0
K>* 5000::/64 [0/1024] via 3000::2, rt1-eth0
2)
% ip -6 route add 7000::/64 via 3000::2
% ip -6 route replace 7000::/64 via 3000::3
% ip -6 ro | grep 7000
7000::/64 via 3000::3 dev rt1-eth0 metric 1024 pref medium
%
% vtysh -c "show ipv6 route"
[snip]
K * 7000::/64 [0/1024] via 3000::3, rt1-eth0
K>* 7000::/64 [0/1024] via 3000::2, rt1-eth0
NOTE: the check for ROUTE_ENTRY_REMOVED was redundant as it was already
performed at the beginning of the loop.
Renato Westphal [Thu, 31 Aug 2017 23:36:14 +0000 (20:36 -0300)]
zebra: remove refcnt from the route_entry structure
This reference counter was introduced in 2001, apparently to solve a
problem with connected routes being added/removed multiple times. The RIB
code changed a lot since then, and giving the current callers of rib_add()
and rib_delete() it's safe to assume that we don't need this anymore.
Nigel Kukard [Wed, 30 Aug 2017 09:39:36 +0000 (09:39 +0000)]
bgpd: Fixed incorrect calculation of pointer location
com_index_to_delete[i] holds the location in lcom->val of where the
value is stored, we cannot just increment it by this value on each
iteration as we'll overflow the size of lcom->val.
Donald Sharp [Wed, 30 Aug 2017 23:38:22 +0000 (19:38 -0400)]
zebra: Allow bh_type to override nexthop selection
If we've set the bh_type to something besides BLACKHOLE_UNSPEC
due to the received route type being RTN_BLACKHOLE,
RTN_UNREACHABLE or RTN_PROHIBIT then just trust that
the nexthop is just what it is and set accordingly.
Fixes: #1082 Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Daniel Walton [Wed, 30 Aug 2017 15:18:02 +0000 (19:18 +0400)]
*: return CMD_WARNING if command was already configured
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
If the user configures some command that is already in the config we
should return CMD_WARNING instead of CMD_WARNING_CONFIG_FAILED
Matthew Smith [Wed, 30 Aug 2017 18:36:20 +0000 (13:36 -0500)]
redhat: Set permissions on systemd service file
Systemd on CentOS 7.3 logs a warning about the execute bit being
set every time the frr service file is invoked by systemctl.
Modify the spec file to explicitly set the permissions to 644.
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
Donald Sharp [Wed, 30 Aug 2017 11:49:51 +0000 (07:49 -0400)]
pimd: Fix pim->keep_alive_time missed patch
The commit '19b807c pimd: Allow the keepalive time to be per vrf.'
is missing some data. Probably as a result of the indentation
and I accidently dropped it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Donald Sharp [Tue, 29 Aug 2017 18:47:35 +0000 (14:47 -0400)]
lib, ospfd, ripd, ripngd: Fix 'set metric'
There are a variety of cli's associated with the
'set metric ...' command. The problem that we
are experiencing is that not all the daemons
support all the varieties of the set metric
and the returned of NULL during the XXX_compile
phase for these unsupported commands is causing
issues. Modify the code base to only return
NULL if we encounter a true parsing issue.
Else we need to keep track if this metric
applies to us or not.
In the case of rip or ripngd if the metric
passed to us is greater than 16 just turn
it internally into a MAX_METRIC.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
David Lamparter [Sun, 27 Aug 2017 20:18:32 +0000 (22:18 +0200)]
bgpd: get rid of afi_header_vty_out() & co.
afi_header_vty_out() is easily replaced with vty_frame(), which means we
can drop a whole batch of "int *write" args as well as the entirety of
bgp_config_write_family_header().
=> AFI/SAFI config writing is now a lot simpler.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
David Lamparter [Fri, 5 Feb 2010 08:48:45 +0000 (09:48 +0100)]
*: remove empty "interface XYZ" config blocks
Using the previously-added vty_frame() support, this gets rid of all the
pointless empty "interface XYZ" blocks that get added for any interface
that shows up in the system (e.g. dummys, tunnels, etc.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
David Lamparter [Fri, 5 Feb 2010 08:48:45 +0000 (09:48 +0100)]
lib: add vty_frame() to get rid of unneeded config
vty_frame() can be used to reduce the amount of output produced by "show
running-config" and "write ...". It buffers output in struct vty->frame
(1024 bytes) and outputs it when vty_out is called. If vty_out isn't
called, it can be removed with vty_endframe() later.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
projects / mirror / frr.git / log