When we process a received Router Advertisement we have some logic in
place to detect and log mismatches in a handful of flags/values.
However, these logs do not include what the actual values are, which
means it's up to the operator to grab a packet capture and compare that
against the local configuration...
So let's make life a little easier by including those in the log itself.
Before:
```
2022/09/30 20:37:16 ZEBRA: [KV2V1-7GM7G][EC 4043309149] enp1s0(2): Rx RA - our AdvCurHopLimit doesn't agree with fe80::5054:ff:feca:b085
2022/09/30 20:37:16 ZEBRA: [KS0BP-4GR8K][EC 4043309149] enp1s0(2): Rx RA - our AdvManagedFlag doesn't agree with fe80::5054:ff:feca:b085
2022/09/30 20:37:16 ZEBRA: [RE4EC-VYEJ2][EC 4043309149] enp1s0(2): Rx RA - our AdvOtherConfigFlag doesn't agree with fe80::5054:ff:feca:b085
2022/09/30 20:37:16 ZEBRA: [X6794-9MW18][EC 4043309149] enp1s0(2): Rx RA - our AdvReachableTime doesn't agree with fe80::5054:ff:feca:b085
2022/09/30 20:37:16 ZEBRA: [S1KXC-H8F4W][EC 4043309149] enp1s0(2): Rx RA - our AdvRetransTimer doesn't agree with fe80::5054:ff:feca:b085
```
After:
```
Sep 30 20:45:18 ub20-2 zebra[47487]: [GSW5Z-V7DZN][EC 4043309149] enp1s0(2): Rx RA - our AdvCurHopLimit (14) doesn't agree with fe80::5054:ff:fe9a:e2ca (64)
Sep 30 20:45:18 ub20-2 zebra[47487]: [RHHTS-F96DR][EC 4043309149] enp1s0(2): Rx RA - our AdvManagedFlag (0) doesn't agree with fe80::5054:ff:fe9a:e2ca (1)
Sep 30 20:45:18 ub20-2 zebra[47487]: [MNBY3-FTN6W][EC 4043309149] enp1s0(2): Rx RA - our AdvOtherConfigFlag (0) doesn't agree with fe80::5054:ff:fe9a:e2ca (1)
Sep 30 20:45:18 ub20-2 zebra[47487]: [GG62B-XXWR0][EC 4043309149] enp1s0(2): Rx RA - our AdvReachableTime (20) doesn't agree with fe80::5054:ff:fe9a:e2ca (777)
Sep 30 20:45:18 ub20-2 zebra[47487]: [YG220-D6B4H][EC 4043309149] enp1s0(2): Rx RA - our AdvRetransTimer (13) doesn't agree with fe80::5054:ff:fe9a:e2ca (0)
```
Donald Sharp [Fri, 30 Sep 2022 12:57:43 +0000 (08:57 -0400)]
bgpd: Ensure FRR has enough data to read 2 bytes in bgp_open_option_parse
In bgp_open_option_parse the code is checking that the
stream has at least 2 bytes to read ( the opt_type and
the opt_length). However if BGP_OPEN_EXT_OPT_PARAMS_CAPABLE(peer)
is configured then FRR is reading 3 bytes. Which is not good
since the packet could be badly formateed. Ensure that
FRR has the appropriate data length to read the data.
Donald Sharp [Fri, 30 Sep 2022 12:51:45 +0000 (08:51 -0400)]
bgpd: Ensure FRR has enough data to read 2 bytes in peek_for_as4_capability
In peek_for_as4_capability the code is checking that the
stream has at least 2 bytes to read ( the opt_type and the
opt_length ). However if BGP_OPEN_EXT_OPT_PARAMS_CAPABLE(peer)
is configured then FRR is reading 3 bytes. Which is not good
since the packet could be badly formated. Ensure that
FRR has the appropriate data length to read the data.
```
donatas-pc# sh run | include allow-reserved-ranges
allow-reserved-ranges
allow-reserved-ranges
allow-reserved-ranges
allow-reserved-ranges
allow-reserved-ranges
allow-reserved-ranges
donatas-pc#
```
Donald Sharp [Tue, 27 Sep 2022 16:24:16 +0000 (12:24 -0400)]
pimd: Allow v6 to do non-integrated configuration
Proof:
eva# conf
eva(config)# no service integrated-vtysh-config
eva(config)# end
eva# wr mem
Note: this version of vtysh never writes vtysh.conf
Building Configuration...
Configuration saved to /etc/frr/zebra.conf
Configuration saved to /etc/frr/ripd.conf
Configuration saved to /etc/frr/ripngd.conf
Configuration saved to /etc/frr/ospfd.conf
Configuration saved to /etc/frr/ospf6d.conf
Configuration saved to /etc/frr/bgpd.conf
Configuration saved to /etc/frr/isisd.conf
Configuration saved to /etc/frr/pimd.conf
Configuration saved to /etc/frr/nhrpd.conf
Configuration saved to /etc/frr/eigrpd.conf
Configuration saved to /etc/frr/babeld.conf
Configuration saved to /etc/frr/sharpd.conf
Configuration saved to /etc/frr/fabricd.conf
Configuration saved to /etc/frr/pbrd.conf
Configuration saved to /etc/frr/staticd.conf
Configuration saved to /etc/frr/bfdd.conf
Configuration saved to /etc/frr/vrrpd.conf
Configuration saved to /etc/frr/pim6d.conf
eva#
Fixes: #12011 Signed-off-by: Donald Sharp <sharpd@nvidia.com>
pimd: IGMP Querier election is not correct in LAN scenario
When more than 2 routers are present in LAN and the querier
goes down, the other routers will wait for other querier
present timer to expire to elect a new querier.
This issue will be seen when the router having next lower ip
address expires the other querier present timer first and it
starts sending the query message. Now on the other non-querier
routers it will receive this query and reset its other
querier present timer but the querier is still the old one
and since it is lowest ip, it never gets updated to the newly
elected querier.
Reset the other querier timer only if query is received from
the previously elected querier or a better new querier
This will make sure that non-querier elects the new querier
whose ip address is higher than the old querier
when the old querier goes down via other querier querier
timer expiry
When removing VRF ( all routes of this VRF), zebra mistakenly forgot to check
whether its routes are in update queue of FPM. So FPM module will crash during
its dealing with these routes, which are already freed.
Add a new HOOK `rib_shutdown()`, `zebra_rtable_node_cleanup()` will use it
to remove these routes from update queue of FPM module before freeing them.
Donald Sharp [Fri, 23 Sep 2022 19:16:40 +0000 (15:16 -0400)]
doc: Align docs to recommend integrated config
Docs were recommending both integrated and non-integrated
config in different sections. Remove the recommendation
for non-integrated config from vtysh.rst.
Donald Sharp [Mon, 19 Sep 2022 16:34:18 +0000 (12:34 -0400)]
isisd: Fix memory leak on shutdown with prefix lists
==2623619==
==2623619== 6 bytes in 1 blocks are definitely lost in loss record 3 of 75
==2623619== at 0x483877F: malloc (vg_replace_malloc.c:307)
==2623619== by 0x4B55E4A: strdup (strdup.c:42)
==2623619== by 0x493C992: qstrdup (memory.c:128)
==2623619== by 0x1A9212: isis_instance_fast_reroute_level_1_remote_lfa_prefix_list_modify (isis_nb_config.c:1599)
==2623619== by 0x494837C: nb_callback_modify (northbound.c:1083)
==2623619== by 0x4948C6E: nb_callback_configuration (northbound.c:1352)
==2623619== by 0x494919D: nb_transaction_process (northbound.c:1473)
==2623619== by 0x4947DA9: nb_candidate_commit_apply (northbound.c:906)
==2623619== by 0x4947EBA: nb_candidate_commit (northbound.c:938)
==2623619== by 0x494EB9E: nb_cli_classic_commit (northbound_cli.c:64)
==2623619== by 0x494F3DC: nb_cli_apply_changes_internal (northbound_cli.c:250)
==2623619== by 0x494F4E2: nb_cli_apply_changes (northbound_cli.c:268)
==2623619== by 0x1BEF0F: isis_frr_remote_lfa_plist_magic (isis_cli.c:1899)
==2623619== by 0x1B7636: isis_frr_remote_lfa_plist (isis_cli_clippy.c:3406)
==2623619== by 0x48EBA75: cmd_execute_command_real (command.c:997)
==2623619== by 0x48EBD4E: cmd_execute_command_strict (command.c:1108)
==2623619== by 0x48EC1E6: command_config_read_one_line (command.c:1268)
==2623619== by 0x48EC35B: config_from_file (command.c:1313)
==2623619== by 0x4999CC1: vty_read_file (vty.c:2347)
==2623619== by 0x499A4AF: vty_read_config (vty.c:2567)
==2623619== by 0x4924B12: frr_config_read_in (libfrr.c:984)
==2623619== by 0x498F5E3: thread_call (thread.c:2008)
==2623619== by 0x49253DA: frr_run (libfrr.c:1198)
==2623619== by 0x14FC53: main (isis_main.c:273)
Abhishek N R [Mon, 29 Aug 2022 12:17:08 +0000 (05:17 -0700)]
pimd, pim6d: Changing IGMP to GM in few macro's.
Changing
IGMP_DEFAULT_ROBUSTNESS_VARIABLE to GM_DEFAULT_ROBUSTNESS_VARIABLE,
IGMP_GENERAL_QUERY_INTERVAL to GM_GENERAL_QUERY_INTERVAL,
IGMP_QUERY_MAX_RESPONSE_TIME_DSEC to GM_QUERY_MAX_RESPONSE_TIME_DSEC and
IGMP_SPECIFIC_QUERY_MAX_RESPONSE_TIME_DSEC to GM_SPECIFIC_QUERY_MAX_RESPONSE_TIME_DSEC
to accomodate both igmp and mld. And moved it to common file.
When R1 and R2 establish BGP session, R1 begins to send initial updates.
If R2 sends a route-refresh request before EoR, it's silently ignored
by R1, and routes received earlier have no chance to be processed again.
RFC7313 says, "for a BGP speaker that supports the BGP Graceful Restart,
it MUST NOT send a BoRR for an <AFI, SAFI> to a neighbor before it sends
the EoR for the <AFI, SAFI> to the neighbor." But it doesn't forbid
route-refresh request to be sent before receiving EoR.
To handle this scenario, postpone response to refresh request until EoR
is sent.
CID 1519843 (#2 of 2): Uninitialized scalar variable (UNINIT)
43. uninit_use_in_call: Using uninitialized value pkt_src->sin6_addr when calling gm_rx_process
Donald Sharp [Wed, 14 Sep 2022 17:48:31 +0000 (13:48 -0400)]
lib: Fix skip of every other plist deletion
When bulk deleting prefix lists on shutdown the code
was calling plist_delete, which removed the item
from the master->str list, and then popping the next
item on the list and just dropping it on the floor.
The pop is not needed.
Abhishek N R [Wed, 14 Sep 2022 06:29:33 +0000 (23:29 -0700)]
pimd, pim6d: Changing IGMP to GM in debug macros.
Changed PIM_DEBUG_IGMP_TRACE to PIM_DEBUG_GM_TRACE and
PIM_DEBUG_IGMP_TRACE_DETAIL to PIM_DEBUG_GM_TRACE_DETAIL.
Hence, these macros can be used for both v6 and v4.
Issue: #11895
Co-authored-by: Sai Gomathi N <nsaigomathi@vmware.com> Signed-off-by: Abhishek N R <abnr@vmware.com>
projects / matthieu / frr.git / log