Donald Sharp [Wed, 21 Dec 2022 13:04:34 +0000 (08:04 -0500)]
vtysh: Remove double retrieve of env VTYSH_HISTFILE
The code is double checking the VTYSH_HISTFILE env variable,
additionally clang-15 when running SA over it doesn't fully
understand the code pattern. Reduce the double check to
one check to reduce program run-time (ha!) and make SA happy.
debian, redhat: updating changelog for new release
8.4 Release Overview
- New BGP [command](https://docs.frrouting.org/en/latest/bgp.html#clicmd-neighbor-A.B.C.D-X-X-X-X-WORD-soo-EXTCOMMUNITY) (`neighbor PEER soo`) to configure SoO to prevent routing loops and suboptimal routing on dual-homed sites.
- Command `debug bgp allow-martian` replaced to `bgp allow-martian-nexthop` because previously we allowed using martian next-hops when debug is turned on.
- Implement `BGP Prefix Origin Validation State Extended Community` [rfc8097](https://datatracker.ietf.org/doc/rfc8097/)
- Implement `Route Leak Prevention and Detection Using Roles in UPDATE and OPEN Messages` [rfc9234](https://datatracker.ietf.org/doc/rfc9234/)
- BMP L3VPN support
- PIMv6 support
- MLD support
- New [command](https://docs.frrouting.org/en/latest/basic.html#clicmd-allow-reserved-ranges) to enable using reserved IPv4 ranges as normal addresses for BGP next-hops, interface addresses, etc.
- As usual, lots of bugs and memory leaks were fixed \m/
Changelog
---------
**babeld**
- Ignore Sub-TLV's with mandatory bit set
- Ignore unicast Hello's
**bfdd**
- Add IPv4 BFD Echo support
- Add RTT to BFD IPv4 Echo packet processing
- Allow L3 VRF BFD sessions without UDP leaking
**bgpd**
- Add `mpls bgp forwarding` to ease MPLS-VPN EBGP peering
- Add `bgp allow-martian-nexthop` command (remove `debug bgp allow-martian`)
- Add `neighbor soo` command
- Add `no rpki` command
- Add `show bgp access-list` command to filter routes by access-list
- Implement [rfc8097](https://datatracker.ietf.org/doc/rfc8097/)
- Implement [rfc9234](https://datatracker.ietf.org/doc/rfc9234/)
- Add resolution for L3VPN traffic over GRE interfaces
- Allow setting custom port for BGP unnumbered peers
- Allow statistics gathering to give more data about prefix lengths
- Apply conditional advertisements policy to update-group
- Associate appropriate family for redistributed connected addresses
- Avoid notify race between io and main pthreads
- Call a hook when as-path filter is replaced
- Cleanup memory leaks associated with t_deferral_timer
- Do not check if the whole as-path has target asn when using as-override
- Do not print new line for EVPN CLI outputs if it's a JSON
- Do not show polling_period default value in CLI for RPKI
- Don't advertise conditionally withdrawn routes
- Drop SSH public key for RPKI CLI option
- Fix `show bgp nexthop a.b.c.d`
- Fix for `aggregate-address summary-only matching-med-only`
- Fix inconsistencies with default-originate route-map
- Fix memory leak for `as-override`
- Fix memory leak for `set as-path replace` route-map command
- Fix memory leak for community alias
- Fix memory leak for community stuff
- Fix memory leak in SRv6 locator
- Fix memory leak when an SRv6 sid is removed
- Fix memory leak when setting [l]community at the egress
- Fix route-map update and delete route-map
- Fix `show bgp l2vpn evpn route rd` crash
- Fix the wrong next-hop BGP struct for next-hop validation
- Fixed BMP VPNv4 monitoring are withdrawn instead of updates
- Fixup PBR rule changes that were missed
- Fixup some MAC address token CLI syntax
- Free ecommunity before returning on warning/error
- Free memory for as-path filter if regexp is wrong
- Free memory for BMP listeners when deleting BGP instance
- Generate RPKI CLI config even if no cache servers are configured
- Handle origin validation state extended community via route-map match
- Handle route-refresh requests received before EOR
- Implement retain route-target all behavior
- Improve labelpool performance at scale
- Inconsistencies in snt counters with default-originate
- Prevent memory leak of the listener on shutdown
- Print peer's hostname for BGP (filtering) messages
- Print source VRF name when leaking to another VRF
- Release RCU lock in BGP keepalive pthread
- Reset BGP sessions when changing the port
- Send route updates when modifying access/aspath/prefix lists
- Set TTL for iBGP/eBGP by checking only if generic TTL security applied
- Show cache server preference in `show rpki cache-server` output
- Show extended communities memory consumption
- Show TTL value unconditionally for neighbors
- Start conditional advertisement timer instantly
- Stop conditional advertisements thread when terminating
- Stop LLGR thread when deleting a peer and/or gr flags changed
- Treat as withdraw if we receive as path with as_set / as_confed_set
- When specifying listen address for BGP we shouldn't imply no-fib flag
- Withdraw implicitly old paths from VRFs when import/export list changes
- Ensure that bgp open message stream has enough data to read
- Notify BGP conditional advertisement thread when the peer goes down
**bmp**
- Add an interface source to BMP connect command
- Add L3VPN support
**eigrpd**
- VRF variable name hides a parameter of the same name
**fabricd**
- Turn off excessive logging when peering will not come up
**isisd**
- Ensure rcap is freed in error case
- Fix crash with xfrm interface type
- Fix memory leak on shutdown with prefix lists
- Fix prefix-sid last-hop-behavior
**ldpd**
- Check if the thread is scheduled before calling for remained time
**lib**
- Abstract usage of '%pnhs' so that next-hop groups can use it too
- Add errno details to the sockopt_reuseaddr API
- Add sys_rawio to the capabilities definitions
- Allow downgrade of all caps when none are specified
- Allow using ipv4 (class e) reserved block if enabled
- Check hostname in resolver_resolve
- Cleanup red-herring memleaks in the parent of daemonizing fork
- Ensure ls_msg2edge does not use memory after freeing
- Fix `show route-map name json` command and memory leak
- Fix memory leak in `zclient_send_localsid()`
- Fix skip of every other plist deletion
- Fixup workqueue.c to use the proper thread.h semantics
- Function `crypt` does not need to be declared mid function
- Increase next-hop flags size to 16 bits
- Prevent uninitialized usage of data
- Remove usage of inet_ntop in lib/sockopt.c
- Require at least 2.1.42 version of sysrepo when compiling
- Return 0 as the remaining msec if the thread is not scheduled
- stream_dup memory alloc cannot fail
- Update sysrepo code with the latest API changes
- Use pi4 instead of inet_ntop in sockopt.c
**nhrpd**
- Use frr_weak_random()
- Use nhrp_interface_update_nbma when source VRF was changed
**ospf6d**
- Don't remove the summary route if it is a range
- Ensure that ospf6d does not memcpy beyond the end of the data
- Fix missing cost change
- Permit route delete without next-hops
- Remove ospf6enabled from JSON output
**ospfd**
- Add how many packets the interface has queued to send
- Add router-id support to OSPF API
- Added CLIs to change default timers for lsa refresh and maxage remove delay.
- Adding per neighbor JSON details to gr helper detail command
- Crash when router acts as gr helper upon a topo change
- Fix `show ip ospf neighbour <nbrid>` command
- Increase packets sent at one time in ospf_write
- Refactor fifo_flush for the interface
- Remove deprecated command `graceful-restart helper-only`
- When a neighbor goes down clear the oi->obuf if we can
- Catch and report too small LSAs
- Remove assert on zero length LSA - which is permitted by spec
- Fix bug where acks were not be generated to incoming P2P/P2MP neighbors
**pathd**
- `no mpls-te on` command was not working
- Add a zebra stop handler
- Change the vty output, when no ted is enabled on pathd
- Ensure the path is free'd after we no longer need it
- Nai adjacency fix query type f for IPv5
pim6d
- (*,g) mroutes not learnt after pim6d daemon restart
- Lots of CLI changes regarding MLD
- Lots of CLI changes regarding PIMv6
- Clear interface stats on interface shutdown
- Disable pim6d compilation by default
- Don't enable MLD on pimreg interface
- Fix the code for MLD in the show pim state command
- mroute stuck in register state, multicast traffic getting drops
- Register message getting dropped in the source node, mroute stuck in regj
- Send register msg with IPv6 global address
- Update last_member_query_interval and last_member_query_count
- Use ttable for displaying show commands
- Deleting the memory malloced for JSON
- Adding JSON support for show ipv6 next-hop
- Send register msg via register socket
- Change the show running commands based on the address family
- Set rp to true if the address matches, ignore prefix-length
**pimd**
- Allow v6 to do non-integrated configuration
- Assign a vty port value for v6
- Cleanup rpf lookup debug to help us figure out what is going on
- Correct the order of show JSON for interface traffic
- During prune pending, behave as noinfo state
- Fix invalid memory access join_timer_stop
- Fix memleak in bfd profile
- Fix PIM interface deletion flow
- Fix static mroute to also take into account the input interface
- Fix the setting of oif_flags in channel oil
- Fix unaligned accesses
- Handle receive of (*,g) register stop with src addr as 0
- Igmp querier election is not correct in lan scenario
- JSON support for next-hop
- Let the end operator know the ifindex as well in the failure case
- Limit PIM's ECMP to what zebra tells us is the multipath
- Querier to non-querier transition to be ignored
- Register stop message sent with mask 32
- Show interface traffic even if the interface is currently `down`
- Update mroute iif based on next-hop received from zebra
- VRF may be null from pim_cmd_lookup_vrf
**ripd**
- Use a sequence number instead of a time
**sharpd**
- Fix memory leak in release-locator-chunk
- Fix memory leak in release-locator-chunk
- Fix memory leaks related to SRv6 next-hops
**staticd**
- When changing the underlying nh ensure it is reinstalled
**tools**
- Add missing bfdd to logrotate config
- Add pim6d to tools so that pim6d will work properly
- Fix boot config load in watchfrr
- Stop zebra daemon last
**vtysh**
- Account validity should be verified when authenticating users with pam
- Add autocomplete for VRFs when using with `router bgp`
- Handle SIGTSTP (c-z) without exiting the vty shell
- Ignore `end` when parsing frr.conf
- Properly handle `[no] service cputime-stats` in config
- Properly handle `service cputime-warning xx` in the config
- Add `allow-reserved-ranges` global command
**watchfrr**
- Check that the operational timeout specified is good
**zebrad**
- Fixing log flooding when disabling MLAG leaf configuration
- Add a `mpls enable` interface node command
- Add a configurable knob `zebra nexthop-group keep (1-3600)`
- Add a timer to next-hop group deletion
- Add ability for netconf dplane to handle global values
- Add interface sysctl ignore on linkdown status
- Add more cases to proto2zebra for understanding kernel routes
- Add some more data to rtadv socket failures
- Add support for maintaining local neigh entries
- Add tc handlers in the script code
- Add tc netlink and dplane ops
- Allow kernel routes to stick around better on interface state changes
- Attempt to make ioctl.c have a bit more useful log messages
- Avoid buffer overflow using netlink_parse_rtattr_nested()
- Cleanup the memory from the hash for MPLS stuff
- Create a zebra_rib_route_entry_new function and use it
- Debug decode rta_expires and rta_mfc_stats
- Delete the malloced memory under `show zebra`
- Don't install connected routes multiple times into frr
- Expand PBR rule action for data-plane programming
- Explicitly call out the correct queue name
- Fix bond down for EVPN-MH
- Fix bug in netconf handling where dplane would drop the change
- Fix crash in shutdown w/ pw thread still running
- Fix ctab calculation typo in tc netlink
- Fix FPM crash
- Fix lost memory on lsp free
- Fix memory leak in srv6 locator delete
- Fix memory leaks and use after frees in nhg's on shutdown
- Fix missing tenant VRF change notification
- Fix missing VNI transition
- Fix remaining mr rtm_getroute oddities
- Fix rtadv startup when config read in is before interface up
- Free neighbor state before the exit to avoid memleaks
- Handle freebsd routing socket enobufs
- Iif/oif are not used in mr rtm_getroute
- Infrastructure for the new dataplane plugin
- Initialize hw via DPDK
- Introduce early route processing on the metaq
- Mc_forwarding was being sent but not retrieved across dataplane
- Notice when an interface is turned on w/ mpls and enable mpls subsystem
- On Linux let interface data come in through netlink messaging
- Pass AFI received for netconf updates
- Pass PBR expanded actions to the dataplane
- Pbr DPDK programming
- Reconfiguring netns for VRF is not a failure
- Rtnetlink: flow attr per gateway attr in multipath updates
- Setup the zebra interface to the DPDK port map table
- System routes should be processed the same time as the kernel
- Use default ns directly in tc dplane
- When deleting next-hop group entries ensure the thread is off
- When saving nhg for later stop processing
Donald Sharp [Mon, 19 Dec 2022 15:51:58 +0000 (10:51 -0500)]
ospfd: Fix some json mem leaks and some issues
a) if show_function happened to be NULL we would leak json memory
b) json_lsa_type was being allocated but only used in the default case, leaking memory
c) json output would sometimes produce text output and that is incorrect
Manoj Naragund [Mon, 19 Dec 2022 12:07:22 +0000 (04:07 -0800)]
ospf6d: Fixing memory leak in ospf6_lsa_create_headeronly for both master and slave.
Problem Statement:
=================
Memory leak backtraces
2022-11-23 01:51:10,525 - ERROR: ==842== 1,100 (1,000 direct, 100 indirect) bytes in 5 blocks are definitely lost in loss record 29 of 31
2022-11-23 01:51:10,525 - ERROR: ==842== at 0x4C31FAC: calloc (vg_replace_malloc.c:762)
2022-11-23 01:51:10,525 - ERROR: ==842== by 0x4E8A1BF: qcalloc (memory.c:111)
2022-11-23 01:51:10,525 - ERROR: ==842== by 0x13555A: ospf6_lsa_alloc (ospf6_lsa.c:723)
2022-11-23 01:51:10,525 - ERROR: ==842== by 0x1355F3: ospf6_lsa_create_headeronly (ospf6_lsa.c:756)
2022-11-23 01:51:10,525 - ERROR: ==842== by 0x135702: ospf6_lsa_copy (ospf6_lsa.c:790)
2022-11-23 01:51:10,525 - ERROR: ==842== by 0x13B64B: ospf6_dbdesc_recv_slave (ospf6_message.c:976)
2022-11-23 01:51:10,525 - ERROR: ==842== by 0x13B64B: ospf6_dbdesc_recv (ospf6_message.c:1038)
2022-11-23 01:51:10,525 - ERROR: ==842== by 0x13B64B: ospf6_read_helper (ospf6_message.c:1838)
2022-11-23 01:51:10,525 - ERROR: ==842== by 0x13B64B: ospf6_receive (ospf6_message.c:1875)
2022-11-23 01:51:10,525 - ERROR: ==842== by 0x4EB741B: thread_call (thread.c:1692)
2022-11-23 01:51:10,526 - ERROR: ==842== by 0x4E85B17: frr_run (libfrr.c:1068)
2022-11-23 01:51:10,526 - ERROR: ==842== by 0x119585: main (ospf6_main.c:228)
2022-11-23 01:51:10,526 - ERROR: ==842==
2022-11-23 01:51:10,524 - ERROR: Found memory leak in module ospf6d
2022-11-23 01:51:10,525 - ERROR: ==842== 220 (200 direct, 20 indirect) bytes in 1 blocks are definitely lost in loss record 21 of 31
2022-11-23 01:51:10,525 - ERROR: ==842== at 0x4C31FAC: calloc (vg_replace_malloc.c:762)
2022-11-23 01:51:10,525 - ERROR: ==842== by 0x4E8A1BF: qcalloc (memory.c:111)
2022-11-23 01:51:10,525 - ERROR: ==842== by 0x13555A: ospf6_lsa_alloc (ospf6_lsa.c:723)
2022-11-23 01:51:10,525 - ERROR: ==842== by 0x1355F3: ospf6_lsa_create_headeronly (ospf6_lsa.c:756)
2022-11-23 01:51:10,525 - ERROR: ==842== by 0x135702: ospf6_lsa_copy (ospf6_lsa.c:790)
2022-11-23 01:51:10,525 - ERROR: ==842== by 0x13BBCE: ospf6_dbdesc_recv_master (ospf6_message.c:760)
2022-11-23 01:51:10,525 - ERROR: ==842== by 0x13BBCE: ospf6_dbdesc_recv (ospf6_message.c:1036)
2022-11-23 01:51:10,525 - ERROR: ==842== by 0x13BBCE: ospf6_read_helper (ospf6_message.c:1838)
2022-11-23 01:51:10,525 - ERROR: ==842== by 0x13BBCE: ospf6_receive (ospf6_message.c:1875)
2022-11-23 01:51:10,525 - ERROR: ==842== by 0x4EB741B: thread_call (thread.c:1692)
2022-11-23 01:51:10,525 - ERROR: ==842== by 0x4E85B17: frr_run (libfrr.c:1068)
2022-11-23 01:51:10,525 - ERROR: ==842== by 0x119585: main (ospf6_main.c:228)
2022-11-23 01:51:10,525 - ERROR: ==842==
RCA:
====
These memory leaks are beacuse of last lsa in neighbour's request_list is not
getting freed beacuse of lsa lock. The last request has an addtional lock which
is added as a part of ospf6_make_lsreq, this lock needs to be removed
in order for the lsa to get freed.
Fix:
====
Check and remove the lock on the last request in all the functions.
Donald Sharp [Sat, 17 Dec 2022 19:09:29 +0000 (14:09 -0500)]
zebra: Ensure memory is not freed that dplane depends on in shutdown
Zebra has a shutdown setup where it asks the dplane to shutdown but can
still be processing data. This is especially true if something the dplane
is listening on receives data that will be processed by the main dplane thread
from netlink. When zebra_finalize is called it is possible that a bit
of data comes in before the zebra_dplane_shutdown() function is called
and the memory freed in ns_walk_func() causes the main dplane event
to crash when it cannot find the ns data anymore.
Reverse the order, stop the zebra dplane pthread and then free the
memory associated with the namespaces.
anlan_cs [Sat, 17 Dec 2022 08:25:56 +0000 (16:25 +0800)]
zebra: fix wrong gateway for fpm debug
The wrong parameter is passed in `inet_ntop()` of `zfpm_log_route_info()` in
old fpm module, so the display of gateway is always wrong. Just remove
that extra ampersand.
Additionally, use "none" as gateway value for the case of no gateway.
ospfd: json support for show ip ospf border-routers
show ip ospf border-routers json support added.
commands:
- show ip ospf vrf default border-routers json
- show ip ospf vrf all border-routers json
- show ip ospf border-routers json
Changes:
JSON support added for below commands,
- show ip nht route-map vrf all json
- show ip nht route-map vrf <name> json
- show ipv6 nht route-map vrf all json
- show ipv6 nht route-map vrf <name> json
- show ipv6 nht route-map json
- show ip nht route-map json
Donald Sharp [Fri, 16 Dec 2022 13:43:16 +0000 (08:43 -0500)]
bgpd: Convert bgp_packet_mpattr_prefix to use an enum for safi's
The function bgp_packet_mpattr_prefix was using an if statement
to encode packets to the peer. Change it to a switch and make
it handle all the cases and fail appropriately when something
has gone wrong. Hopefully in the future when a new afi/safi
is added we can catch it by compilation breaking instead of
weird runtime errors
Donald Sharp [Fri, 16 Dec 2022 13:17:18 +0000 (08:17 -0500)]
bgpd: make bgp_packet_mpattr_start more prescriptive when using enum's
This function was just using default: case statements for
the encoding of nlri's to a peer. Lay out all the different
cases and make things fail hard when a dev escape is found.
Donald Sharp [Fri, 16 Dec 2022 12:58:54 +0000 (07:58 -0500)]
bgpd: Convert bgp_packet_mpattr_prefix_size to use an enum
The function bgp_packet_mpattr_prefix_size had an if/else
body that allowed people to add encoding types to bgpd
such that we could build the wrong size packets. This
was exposed recently in commit: 0a9705a1e07c1d8176fd21f8f1bde2a9a155331b
Where it was discovered flowspec was causing bgp update
messages to exceed the maximum size and the peer to
drop the connection. Let's be proscriptive about this
and hopefully make it so that things don't work when
someone adds a new safi to the system ( and they'll have
to update this function ).
Donald Sharp [Fri, 16 Dec 2022 12:38:58 +0000 (07:38 -0500)]
lib, staticd: return values even after an assert
When compiling with -fsanitize=thread. I started getting this error:
staticd/static_zebra.c: In function ‘static_zebra_nht_get_prefix’:
staticd/static_zebra.c:316:1: error: control reaches end of non-void function [-Werror=return-type]
316 | }
| ^
Just to make future efforts still work, let's just make the compiler happy.
Trey Aspelund [Thu, 15 Dec 2022 18:49:43 +0000 (18:49 +0000)]
bgpd: cleanup macip_path_list for remote macip
ASAN reported the following memleak:
```
Direct leak of 40 byte(s) in 1 object(s) allocated from:
#0 0x4d4342 in calloc (/usr/lib/frr/bgpd+0x4d4342)
#1 0xbc3d68 in qcalloc /home/sharpd/frr8/lib/memory.c:116:27
#2 0xb869f7 in list_new /home/sharpd/frr8/lib/linklist.c:64:9
#3 0x5a38bc in bgp_evpn_remote_ip_hash_alloc /home/sharpd/frr8/bgpd/bgp_evpn.c:6789:24
#4 0xb358d3 in hash_get /home/sharpd/frr8/lib/hash.c:162:13
#5 0x593d39 in bgp_evpn_remote_ip_hash_add /home/sharpd/frr8/bgpd/bgp_evpn.c:6881:7
#6 0x59dbbd in install_evpn_route_entry_in_vni_common /home/sharpd/frr8/bgpd/bgp_evpn.c:3049:2
#7 0x59cfe0 in install_evpn_route_entry_in_vni_ip /home/sharpd/frr8/bgpd/bgp_evpn.c:3126:8
#8 0x59c6f0 in install_evpn_route_entry /home/sharpd/frr8/bgpd/bgp_evpn.c:3318:8
#9 0x59bb52 in install_uninstall_route_in_vnis /home/sharpd/frr8/bgpd/bgp_evpn.c:3888:10
#10 0x59b6d2 in bgp_evpn_install_uninstall_table /home/sharpd/frr8/bgpd/bgp_evpn.c:4019:5
#11 0x578857 in install_uninstall_evpn_route /home/sharpd/frr8/bgpd/bgp_evpn.c:4051:9
#12 0x58ada6 in bgp_evpn_import_route /home/sharpd/frr8/bgpd/bgp_evpn.c:6049:9
#13 0x713794 in bgp_update /home/sharpd/frr8/bgpd/bgp_route.c:4842:3
#14 0x583fa0 in process_type2_route /home/sharpd/frr8/bgpd/bgp_evpn.c:4518:9
#15 0x5824ba in bgp_nlri_parse_evpn /home/sharpd/frr8/bgpd/bgp_evpn.c:5732:8
#16 0x6ae6a2 in bgp_nlri_parse /home/sharpd/frr8/bgpd/bgp_packet.c:363:10
#17 0x6be6fa in bgp_update_receive /home/sharpd/frr8/bgpd/bgp_packet.c:2020:15
#18 0x6b7433 in bgp_process_packet /home/sharpd/frr8/bgpd/bgp_packet.c:2929:11
#19 0xd00146 in thread_call /home/sharpd/frr8/lib/thread.c:2006:2
```
The list itself was not being cleaned up when the final list entry was
removed, so make sure we do that instead of leaking memory.
Donald Sharp [Wed, 14 Dec 2022 20:53:06 +0000 (15:53 -0500)]
lib: Fix free function
The list delete function on creation was set to srv6_locator_chunk_free
Which takes a double pointer and dereferences it to free the data.
When list_delete is called it calls the delete function like this:
if (*list->del)
(*list->del)(node->data);
The data is not passed in by reference and as such we do not have
a double pointer. Fortunately this list_delete is only really
called on shutdown when the locator was deleted and we do not
have a fun situation where we were suddenly freeing 'something'.
Donald Sharp [Wed, 14 Dec 2022 19:20:26 +0000 (14:20 -0500)]
zebra: When freeing the early route queue, actually free it right
The early route queue has a series of `struct zebra_early_route *`
entries. Zebra is treating this memory as just a `struct route entry`.
This is wrong. Correct this to free the memory correctly.
Donald Sharp [Wed, 14 Dec 2022 19:05:11 +0000 (14:05 -0500)]
lib, tests, zebra: Remove unused workqueue error function
The wq->spec.errorfunc is never used in the code.
It's been in the code base since 2005 and I also
do not remember ever seeing it being called. No
workqueue process function ever returns error.
Since it's not used let's just remove it from the
code base.
Donald Sharp [Wed, 14 Dec 2022 17:53:53 +0000 (12:53 -0500)]
tests: Limit run of config_timing when building with --enable-address-sanitizer
Building FRR with --enable-address-sanitizer and then running the
config_timing test makes the test run for over an hour on my machine.
The goal of this test is to ensure that the test runs 10000 routes
in/out in a reasonable amount of time. We cannot test this with
address-sanitizer enabled. So just make the test meaningless
from a timing perspective but keep it `alive` from a it might
catch some address sanitizer issue with 50 -vs- 10000 routes
Direct leak of 128 byte(s) in 4 object(s) allocated from:
#0 0x4bd732 in calloc (/usr/lib/frr/zebra+0x4bd732)
#1 0x7feaeab8f798 in qcalloc /home/sharpd/frr8/lib/memory.c:116:27
#2 0x7feaeaba40f4 in nexthop_group_new /home/sharpd/frr8/lib/nexthop_group.c:270:9
#3 0x56859b in netlink_route_change_read_unicast /home/sharpd/frr8/zebra/rt_netlink.c:950:9
#4 0x5651c2 in netlink_route_change /home/sharpd/frr8/zebra/rt_netlink.c:1204:2
#5 0x54af15 in netlink_information_fetch /home/sharpd/frr8/zebra/kernel_netlink.c:407:10
#6 0x53e7a3 in netlink_parse_info /home/sharpd/frr8/zebra/kernel_netlink.c:1184:12
#7 0x548d46 in kernel_read /home/sharpd/frr8/zebra/kernel_netlink.c:501:2
#8 0x7feaeacc87f6 in thread_call /home/sharpd/frr8/lib/thread.c:2006:2
#9 0x7feaeab36503 in frr_run /home/sharpd/frr8/lib/libfrr.c:1198:3
#10 0x550d38 in main /home/sharpd/frr8/zebra/main.c:476:2
#11 0x7feaea492d09 in __libc_start_main csu/../csu/libc-start.c:308:16
Indirect leak of 576 byte(s) in 4 object(s) allocated from:
#0 0x4bd732 in calloc (/usr/lib/frr/zebra+0x4bd732)
#1 0x7feaeab8f798 in qcalloc /home/sharpd/frr8/lib/memory.c:116:27
#2 0x7feaeab9b3f8 in nexthop_new /home/sharpd/frr8/lib/nexthop.c:373:7
#3 0x56875e in netlink_route_change_read_unicast /home/sharpd/frr8/zebra/rt_netlink.c:960:15
#4 0x5651c2 in netlink_route_change /home/sharpd/frr8/zebra/rt_netlink.c:1204:2
#5 0x54af15 in netlink_information_fetch /home/sharpd/frr8/zebra/kernel_netlink.c:407:10
#6 0x53e7a3 in netlink_parse_info /home/sharpd/frr8/zebra/kernel_netlink.c:1184:12
#7 0x548d46 in kernel_read /home/sharpd/frr8/zebra/kernel_netlink.c:501:2
#8 0x7feaeacc87f6 in thread_call /home/sharpd/frr8/lib/thread.c:2006:2
#9 0x7feaeab36503 in frr_run /home/sharpd/frr8/lib/libfrr.c:1198:3
#10 0x550d38 in main /home/sharpd/frr8/zebra/main.c:476:2
#11 0x7feaea492d09 in __libc_start_main csu/../csu/libc-start.c:308:16
SUMMARY: AddressSanitizer: 704 byte(s) leaked in 8 allocation(s).
Louis Scalbert [Mon, 14 Feb 2022 13:18:10 +0000 (14:18 +0100)]
bgpd: fix the IGP metric for best path selection on VPN import
Since the commit da0c0ef70c ("bgpd: VRF-Lite fix best path selection"),
the best path selection is made from the comparison of the attributes
of the original route i.e. the ultimate path.
The IGP metric is currently set on the child path instead of the
ultimate path (i.e. the parent path). On eBGP, the ultimate path is the
child path. However, for imported routes, the ultimate path is always
set to 0, which results in skipping the IGP metric comparison when
selecting the best path.
Set the IGP metric on the ultimate path when a BGP nexthop is added or
updated.
Fixes: da0c0ef70c ("bgpd: VRF-Lite fix best path selection") Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
bgpd: Add support for flowspec prefixes in bgp_packet_mpattr_prefix_size
Currently, bgp_packet_mpattr_prefix_size (bgpd/bgp_attr.c:3978) always returns zero for Flowspec prefixes.
This is because, for flowspec prefixes, the prefixlen attribute of the prefix struct is always set to 0, and the actual length is bytes is set inside the flowspec_prefix struct instead (see lib/prefix.h:293 and lib/prefix.h:178).
Because of this, with a large number of flowspec NLRIs, bgpd ends up building update messages that exceed the maximum size and cause the peer to drop the connection (bgpd/bgp_updgrp_packet.c:L719).
The proposed change allows the bgp_packet_mpattr_prefix_size to return correct result for flowspec prefixes.
Donald Sharp [Thu, 3 Nov 2022 23:01:36 +0000 (19:01 -0400)]
bgpd: use the enum instead of an int
The bgp_fsm_change_status function takes an int
for the new bgp state, which is an `enum bgp_fsm_status status`
let's convert over to being explicit.bgpd: use the enum instead of an int
Kuldeep Kashyap [Fri, 9 Dec 2022 15:21:29 +0000 (07:21 -0800)]
tests: Topotests daemon start as per feature test
Currently topotests starts all daemons by default,
made changes to f/w so only needed daemons can
be started, daemons which are needed to tests
particular test suite.
David Lamparter [Tue, 13 Dec 2022 17:34:41 +0000 (18:34 +0100)]
accords: CLI coloring
This is pretty much a writeup of the discussion we had on the FRR weekly
call about an hour ago. I added a bunch of detail but hopefully it
still represents the overall consensus.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Rafael Zalamena [Mon, 12 Dec 2022 18:11:27 +0000 (15:11 -0300)]
ospfd: fix memory leak on SPF calculation
Fix the following problems:
- Always free vertex next hops on `vertex_parent_free`
- Signalize failure on `ospf_spf_add_parent` when parent already exists
so the caller has the chance to `free()` any allocated resources.
- Don't reuse vertex next hops without the reference count logic in
`ospf_nexthop_calculation`. Instead allocate a new copy so it can be
`free()`d later without complications
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Donald Sharp [Tue, 4 Oct 2022 19:41:36 +0000 (15:41 -0400)]
zebra: Add ctx to netlink message parsing
Add the initial step of passing in a dplane context
to reading route netlink messages. This code
will be run in two contexts:
a) The normal pthread for reading netlink messages from
the kernel
b) The dplane_fpm_nl pthread.
The goal of this commit is too just allow a) to work
b) will be filled in in the future. Effectively
everything should still be working as it should
pre this change. We will just possibly allow
the passing of the context around( but not used )
Donald Sharp [Mon, 3 Oct 2022 17:22:22 +0000 (13:22 -0400)]
zebra: Rearrange dplane_ctx_route_init
In order for a future commit to abstract the dplane_ctx_route_init
so that the kernel can use it, let's move some stuff around
and add a dplane_ctx_route_init_basic that can be used by multiple
different paths
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
create a dplane_ctx_route_init_basic so it can be used
projects / mirror / frr.git / log