Quentin Young [Wed, 8 Apr 2020 20:29:23 +0000 (16:29 -0400)]
lib: fix if_set_value
Something in there is wrong and causing test failures. Moving it back to
how it was; we'll stil assert if the message was wrong, just in a
different place now.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Quentin Young [Tue, 24 Mar 2020 17:16:06 +0000 (13:16 -0400)]
lib: work around enum issue in old gcc
I'd like to keep the explicit check here, but since underlying type of
enum is implementation defined, theres some inconsistency using -Wall
-Werror in older compilers here
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Quentin Young [Mon, 2 Mar 2020 23:50:58 +0000 (18:50 -0500)]
lib: handle failure to change ifindex
This fixes a theoretical bug that could occur when trying to change an
ifindex on an interface to that of an existing interface. We would
remove the interface from the ifindex tree, and change the ifindex, but
when we tried to reinsert the interface, the insert would fail. It was
impossible to know if this failed due to the insertion / deletion macros
capturing the result value of the underlying BSD tree macros. So we
would effectively delete the interface.
Instead of failing on insert, we just check if the prospective ifindex
already exists and return -1 if it does.
Macros have been changed to statement expressions so the result can be
checked, and bubbled up.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Donald Sharp [Mon, 13 Apr 2020 12:12:26 +0000 (08:12 -0400)]
sharpd: Allow sharpd to specify it's own routes for label changes
With the command using STR_SHARP, the sharp daemon is not allowed
to use it's own routes for label modification. Switching over
to STR_ZEBRA allows the sharp daemon to modify labels on any
route in the system, since there are no `ROUTE_ZEBRA` types.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Sarita Patra [Mon, 16 Mar 2020 20:41:46 +0000 (13:41 -0700)]
pimd: added no ip msdp mesh-group <word>
Issue: no ip msdp mesh-group <word> source command
deleting the mesh group, which might be used by the member.
Solution: no ip msdp mesh-group <word> source command, deletes
the mesh-group source.
Add a new cli command "no ip msdp mesh-group <word>" to delete
the mesh group.
Jakub Urbańczyk [Sun, 15 Mar 2020 18:42:30 +0000 (19:42 +0100)]
zebra: Add vrf name and id to debugs
In some places we log the interface but not the vfr the
interface is in. In others we only output the vrf id, which
can be difficult for human to read. This commit makes zebra
debugs more vrf aware.
Don Slice [Thu, 2 Apr 2020 17:50:53 +0000 (17:50 +0000)]
ospf6d: stop looping thru same Inter-Area Router LSAs
Processing loop uncovered when there are multiple ABRs also
acting as ASBRs into the same area in ospf6. The problem
was that when looking thru the list of Inter-area router
entries, if the current entry being processed matched, it
still merged next-hops and re-initiated the process. In
this fix, if the route/path matches and the next-hops also
match, there is no need to re-initiate the examine process.
Ticket: CM-28900 Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
1. Added 5 test cases to verify BGP AS-allow-in behavior in FRR
2. Enhanced framework to support BGP AS-allow-in config(lib/bgp.py)
3. Added API in bgp.py to verify BGP RIB table(lib/bgp.py)
bgpd: Trigger EVPN type-5 injection upon link-bandwidth change
Ensure that upon a link-bandwidth change - for e.g., due to change in
the number of multipaths - EVPN type-5 route injection is triggered.
In the absence of this, the proper link-bandwidth is not updated in
EVPN type-5 routes originated by the router.
David Lamparter [Wed, 8 Apr 2020 13:17:21 +0000 (15:17 +0200)]
tests: fix parallel build race
If we're building with a separate build directory, these two build
targets can fail in case their output directory hasn't been created by
some other target that may or may not have run earlier.
Signed-off-by: David Lamparter <equinox@diac24.net>
tests: Adding new test suite bgp_communities_topo1
1. Added 1 test case to verify NO-ADVERTISE Community functionality
2. Enhanced bgp.py to exclude routers from verification, if doesn't have bgp config
1. Added 5 test cases to verify BGP AS-allow-in behavior in FRR
2. Enhanced framework to support BGP AS-allow-in config(lib/bgp.py)
3. Added API in bgp.py to verify BGP RIB table(lib/bgp.py)
for some reason, when issuing a 'no metric-style' command we were
setting the metric-style to narrow, even though the default is
actually wide. Use NULL to avoid similar problems in the future.
Likewise, the 'no is-type' command was still trying to implement
the old logic of applying a different default for the first area.
In practice this had no effect because the value would now be the
same in both cases, but it's better to remove useless code anyway.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
Mark Stapp [Thu, 26 Mar 2020 18:11:56 +0000 (14:11 -0400)]
lib: support replacement in the nexthop-group cli
Use more limited matching logic so that nexthops within a
nexthop-group are unique based only on vrf, type, and gateway.
Treat configuration of a nexthop that matches an existing
nexthop as a replace operation.
zebra should only check whether a get_chunk operation succeeded
when processing the response, rather than insde the get_chunk
call itself. Spllitting the request and response hooks was done
precisely to allow for asynchronous calls to an external label
manager; in this case, the requested chunk is not necessarily
going to be available at request time.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
Yang constraints enforced by the northbound callbacks require that
the maximum lifetime be >= than (refresh interval + 300). When we are
moving from one config to another through frr-reload.py, we issue
a number of vtysh -c commands ('no lsp-refresh-interval level-1 500',
'no max-lsp-lifetime level-1 1000'), which reset these parameters to their
default values, respectively 900 and 1200. Depending on the actual
values in the current config, the order in which these commands are sent
might be the wrong one, in that we hit an invalid intermediate state and
make vtysh (and by extension frr-reload.py) return an error.
As a workaround, let's add a one-liner command that sets all these
inter-related parameters in one go, and make isisd display them as a
single line too, so that the diff will be computed as a single command.
The old individual commands are kept to ensure backwards compatibility.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
Quentin Young [Sun, 5 Apr 2020 21:11:25 +0000 (17:11 -0400)]
bgpd: fix multiple bugs with cluster_list attrs
Multiple different issues causing mostly UAFs but maybe other more
subtle things.
- Cluster lists were the only attributes whose pointers were not being
NULL'd when freed, resulting in heap UAF
- When performing an insert into the cluster hash, our temporary struct
used for hash_get() was inconsistent with our hash keying and
comparison functions. In the case of a zero length cluster list, the
->length field is 0 and the ->list field is NULL. When performing an
insert, we set the ->list field regardless of whether the length is 0.
This resulted in the two cluster lists hashing equal but not comparing
equal. Later, when removing one of them from the hash before freeing
it, because the key matched and the comparison succeeded (because it
was set to NULL *after* the search but *before* inserting into the
hash) we would sometimes release the duplicated copy of the struct,
and then free the one that remained in the hash table. Later accesses
constitute UAF. This is fixed by making sure the fields used for the
existence check match what is actually inserted into the hash when
that check fails.
This patch also makes cluster_unintern static, because it should be.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
projects / matthieu / frr.git / log