Jakub Urbańczyk [Thu, 16 Jul 2020 13:49:05 +0000 (15:49 +0200)]
zebra: fix installing an evpn neighbor update
Fix the function encoding evpn neighbor. The size of the buffer
for the netlink message wasn't correct and because of that we thought that
the message didn't fit entirely in the buffer and thus we were not sending
the update to the kernel.
While iteratively looking for a best match route-map index amongst
a list of potential best match route-map indices, if a candidate
best match index is already found, disregard the value returned by
the function route_map_apply_match() if it returns either RMAP_NOOP
or RMAP_NOMATCH in the following iterations.
This is because if a best match route-map index is found then, the
return value must always be set to RMAP_MATCH.
George Wilkie [Mon, 5 Nov 2018 15:43:55 +0000 (15:43 +0000)]
ospfd: set display format for range command
If you configure an area range in decimal format, the running
configuration displays it in dotted format.
Call ospf_area_display_format_set() for area range command,
as it is done for other variants.
tests: [topojson] Increase BGP convergence wait time
1. Increasing BGP convergence wait time to overcome Ubuntu 16.04 arm8 box, as
bgp neighorship is taking more time in this particular testbed.
2. Debugged bgp-ecmp-topo2 failures and here also it seems to be bgp convergence
issue, doing some enhancement in scripts to handle it
David Lamparter [Tue, 14 Jul 2020 10:02:54 +0000 (12:02 +0200)]
isisd: fix OpenBSD pedantic format warnings
constants are int-typed, so adding something to an uint8_t yields an
int. Nevermind the fact that varargs calling conventions require
upcasting everything smaller than an int to an int anyways...
Signed-off-by: David Lamparter <equinox@diac24.net>
David Lamparter [Fri, 27 Mar 2020 11:35:23 +0000 (12:35 +0100)]
*: un-split strings across lines
Remove mid-string line breaks, cf. workflow doc:
.. [#tool_style_conflicts] For example, lines over 80 characters are allowed
for text strings to make it possible to search the code for them: please
see `Linux kernel style (breaking long lines and strings)
<https://www.kernel.org/doc/html/v4.10/process/coding-style.html#breaking-long-lines-and-strings>`_
and `Issue #1794 <https://github.com/FRRouting/frr/issues/1794>`_.
bgpd: Show the real next-hop address in addition to hostname in `show bgp`
It's hard to cope with cases when next-hop is changed/unchanged or
peers are non-direct.
It would be better to show the hostname and nexthop IP address (both)
under `show bgp` to quickly identify the source and the real next-hop
of the route.
If `bgp default show-nexthop-hostname` is toggled the output looks like:
```
spine1-debian-9# show bgp
BGP table version is 1, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 65002
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
* 2a02:4780::/64 fe80::a00:27ff:fe09:f8a3(exit1-debian-9)
0 0 65001 ?
spine1-debian-9# show ip bgp
BGP table version is 5, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 65002
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 10.255.255.0/24 192.168.0.1(exit1-debian-9)
0 0 65001 ?
```
Stephen Worley [Mon, 6 Jul 2020 22:20:14 +0000 (18:20 -0400)]
zebra: mark connected nh inactive if not matching ifindex
If we are asked to check if a nexthop is active and it matches a
connected route but the ifindex on it does not match the interface
with the connected route, mark as inactive. This is a bad nexthop.
Before, we would skip this check and just assume any nexthop that matches
on a connected route is valid and return here then fail during
installation. This adds a check for the IPV*_ifindex nexthop case where the
ifindex we have been sent doesn't match.
Old:
F>r 0.0.0.0/0 [200/0] via 20.0.0.2, test, weight 1, 00:00:27
r via 40.4.4.4, lo, weight 1, 00:00:27
New:
F>* 0.0.0.0/0 [200/0] via 20.0.0.2, test, weight 1, 00:00:06
* via 40.4.4.4, lo inactive, weight 1, 00:00:06
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
bgpd: Add command to show only established sessions
```
exit1-debian-9# show bgp summary
IPv4 Unicast Summary:
BGP router identifier 192.168.0.1, local AS number 100 vrf-id 0
BGP table version 8
RIB entries 15, using 2880 bytes of memory
Peers 2, using 43 KiB of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd PfxSnt
192.168.0.2 4 200 10 6 0 0 0 00:00:35 8 8
2a02:4780::2 4 0 0 1 0 0 0 never Active 0
Total number of neighbors 2
exit1-debian-9# show bgp summary established
IPv4 Unicast Summary:
BGP router identifier 192.168.0.1, local AS number 100 vrf-id 0
BGP table version 8
RIB entries 15, using 2880 bytes of memory
Peers 2, using 43 KiB of memory
Total number of neighbors 2
exit1-debian-9# show bgp summary failed
IPv4 Unicast Summary:
BGP router identifier 192.168.0.1, local AS number 100 vrf-id 0
BGP table version 8
RIB entries 15, using 2880 bytes of memory
Peers 2, using 43 KiB of memory
Neighbor EstdCnt DropCnt ResetTime Reason
2a02:4780::2 0 0 never Waiting for peer OPEN
Donald Sharp [Wed, 8 Jul 2020 01:48:34 +0000 (21:48 -0400)]
ospfd: allow interfaces to come up in rare situation
On startup of both zebra and ospfd. If ospfd has not
received a valid router-id *but* has received interface
data, interfaces will not be turned on in the state
machine. When ospf finally receives a valid router-id
it would never actually kick the state machine into
action for those interfaces it has been configured for.
Modify ospf on router id changes, *if* the old
router id was INADDR_ANY *and* the interface is
operative *and* the oi->state is ISM_Down, give
it the old kick in the patooeys
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Mark Stapp [Tue, 2 Jun 2020 20:16:21 +0000 (16:16 -0400)]
zebra: collapse some duplicate LSP nhlfe apis
Collapse some apis where primary and backup nhlfe code
was very similar, generally using a single common api
and using a bool to distinguish between primary and
backup.
Mark Stapp [Tue, 2 Jun 2020 15:04:56 +0000 (11:04 -0400)]
zebra: add init api for dplane lsp context
Add an init api (based on what had been a private/static api)
to allow a caller to init a context and use it to generate LSP
updates. This might be useful for testing, or from a dplane
plugin.
Mark Stapp [Wed, 27 May 2020 16:53:20 +0000 (12:53 -0400)]
zebra: include backup nexthops in nexthop-tracking
Include backup nexthops when examining routes that resolve
NHT requests. Include installed backups when sending nexthops
in zapi messages to client daemons.
When handling a fib notification event that involves a route
with backup nexthops, be clearer about representing the
installed state of the backups: any installed backup will be
on a dedicated route_entry list.
Mark Stapp [Fri, 8 May 2020 20:22:54 +0000 (16:22 -0400)]
staticd,zebra: use ALLOW_RECURSION for static routes
Remove a special-case clause for static routes - it was the same
as the clause for other recursive routes. Have staticd just tell
zebra that recursion is allowed. Update topotest that was aware
of this 'internal' flag.
Santosh P K [Sun, 3 May 2020 09:25:55 +0000 (02:25 -0700)]
ospf: Default-information originate with routemap
Default originate with route-map was broken. Routemap
was not getting applied for redistribute route but was
getting applied default route itself. No default route
was originated even when routemap was satisfied.
projects / mirror / frr.git / log