* Correct the metric calculation as well as the default metrics;
* Do not show invalid routes in the "show ip eigrp topology".
* Add support to VRFs;
* When downloading a neighbor remove the related routes;
* Fix bugs in the parser of packages they were creating
Invalid default routes;
* Add and remove routes in the zebra;
* Add command "on router eigrp AS";
* Make "delay" and "bandwitch" commands work as well as
Display them in running config;
* Add "no" version of several commands;
* Fix a serious momory leaks;
* Fix segfault when there is no 'successor' route to a
Given prefix;
* Other minor corrections;
Signed-off-by: Renato Westphal <renatowestphal@gmail.com> Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Daniel Walton [Wed, 10 May 2017 13:42:00 +0000 (09:42 -0400)]
zebra: lsp_install() failed due to ZEBRA_FLAG_SELECTED check
ZEBRA_FLAG_SELECTED hasn't been set yet by the time lsp_install is
called. The call path is:
rib_process -> rib_process_add_fib -> zebra_mpls_lsp_install -> lsp_install
but ZEBRA_FLAG_SELECTED is set in rib_process after it calls
rib_process_add_fib. I can't think of anything that it would hurt to
install the LSP regardless of whether ZEBRA_FLAG_SELECTED is set later.
I also cleaned up some UI (json and display the pretty label names
instead of their numeric values).
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Quentin Young [Fri, 5 May 2017 21:22:25 +0000 (21:22 +0000)]
*: update thread_add_* calls
Pass pointer to pointer instead of assigning by return value. See
previous commit message.
To ensure that the behavior stays functionally correct, any assignments
with the result of a thread_add* function have been transformed to set
the pointer to null before passing it. These can be removed wherever the
pointer is known to already be null.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Quentin Young [Fri, 5 May 2017 17:30:21 +0000 (17:30 +0000)]
lib: safely check & set thread pointers
When scheduling a thread, the scheduling function returns a pointer to
the struct thread that was placed on one of the scheduling queues in the
associated thread master. This pointer is used to check whether or not
the thread is scheduled, and is passed to thread_cancel() should the
daemon need to cancel that particular task.
The thread_fetch() function is called to retrieve the next thread to
execute. However, when it returns, the aforementioned pointer is not
updated. As a result, in order for the above use cases to work, every
thread handler function must set the associated pointer to NULL. This is
bug prone, and moreover, not thread safe.
This patch changes the thread scheduling functions to return void. If
the caller needs a reference to the scheduled thread, it must pass in a
pointer to store the pointer to the thread struct in. Subsequent calls
to thread_cancel(), thread_cancel_event() or thread_fetch() will result
in that pointer being nulled before return. These operations occur
within the thread_master critical sections.
Overall this should avoid bugs introduced by thread handler funcs
forgetting to null the associated pointer, double-scheduling caused by
overwriting pointers to currently scheduled threads without performing a
nullity check, and the introduction of true kernel threads causing race
conditions within the userspace threading world.
Also removes the return value for thread_execute since it always returns
null...
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Quentin Young [Mon, 24 Apr 2017 22:33:25 +0000 (22:33 +0000)]
*: remove THREAD_ON macros, add nullity check
The way thread.c is written, a caller who wishes to be able to cancel a
thread or avoid scheduling it twice must keep a reference to the thread.
Typically this is done with a long lived pointer whose value is checked
for null in order to know if the thread is currently scheduled. The
check-and-schedule idiom is so common that several wrapper macros in
thread.h existed solely to provide it.
This patch removes those macros and adds a new parameter to all
thread_add_* functions which is a pointer to the struct thread * to
store the result of a scheduling call. If the value passed is non-null,
the thread will only be scheduled if the value is null. This helps with
consistency.
A Coccinelle spatch has been used to transform code of the form:
if (t == NULL)
t = thread_add_* (...)
to the form
thread_add_* (..., &t)
The THREAD_ON macros have also been transformed to the underlying
thread.c calls.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Donald Sharp [Tue, 9 May 2017 20:18:04 +0000 (16:18 -0400)]
*: Remove ability to install frr_sudoers
If the user were to uncomment last line
and allow VTYSH_SHOW to be used as a non-root
account, this would allow arbitrary command completion
inside of vtysh via multiple -c ... -c .... lines
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Chirag Shah [Fri, 21 Apr 2017 22:08:03 +0000 (15:08 -0700)]
pimd: Fix WG/SGRpt & WG J/P processing
During processing of Join/Prune,
for a S,G entry, current state is SGRpt, when only *,G is
received, need to clear SGRpt and add/inherit the *,G OIF to S,G so
it can forward traffic to downstream where *,G is received.
Upon receiving SGRpt prune remove the inherited *,G OIF.
From, downstream router received *,G Prune along with SGRpt
prune. Avoid sending *,G and SGRpt Prune together.
Reset upstream_del reset ifchannel to NULL.
Testing Done:
Run failed smoke test of sending data packets, trigger SPT switchover,
*,G path received SGRpt later data traffic stopped S,G ages out from LHR, sends only
*,G join to upstream, verified S,G entry inherit the OIF.
Upon receiving SGRpt deletes inherited oif and retains in SGRpt state.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Chirag Shah [Wed, 26 Apr 2017 01:56:00 +0000 (18:56 -0700)]
pimd: replay IGMP static group upon if creation
Upon static IGMP configured port down igmp source info is destroyed.
Upon port up or quagga restart (if addr add) register IGMP sock with
port, source, group.
Testing Done:
Configure IGMPv3 Report on Host swpx, ifdown/ifup swpx,
verify ip mroute containng IGMP mroute
tor-1# show ip mroute
Source Group Proto Input Output TTL Uptime
30.1.1.1 225.1.1.21 IGMP swp2 swp3 1 00:00:05
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Chirag Shah [Thu, 4 May 2017 01:56:44 +0000 (18:56 -0700)]
pimd: fix pimd crash when pim interface disabled
Upon pim enabled disabled, current upstreams entries rpf update callback,
needs to check if old rpf is still pim enabled otherwise do not trigger
prune towards old rpf.
Testing Done:
Verified by disabling pim enabled rpf interface and
crash is not observed upon disabling pim on rpf interface.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Chirag Shah [Mon, 10 Apr 2017 20:27:56 +0000 (13:27 -0700)]
pimd: fix pim ecmp rebalance config write
ip pim ecmp and ip pim ecmp rebalance configuration CLIs were
not adding to Quagga.confg or running configuration.
Added both the configuration write in Config write handler.
Testing Done: Execute configuration cli and verified running config
and Quagga.conf file containing both configuration.
03# show running-config
Building configuration...
Current configuration:
!
ip multicast-routing
ip pim rp 6.0.0.9 230.0.0.0/16
ip pim join-prune-interval 61
ip pim ecmp
ip pim ecmp rebalance
!
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Chirag Shah [Thu, 27 Apr 2017 18:01:32 +0000 (11:01 -0700)]
pimd: fix channel_oil and upstream RPF in sync
During PIM Neighbor change/UP event, pim_scan_oil api
scans all channel oil to see any rpf impacted. Instead of
passing current upstream's RPF it passes current RPF as 0 and
does query to rib for nexhtop (without ECMP/Rebalance). This creates
inconsist RPF between Upstream and Channel oil.
In Channel Oil keep backward pointer to upstream DB and fetch up's
RPF and passed to channel_oil scan.
Decrement channel_oil ref_count in upstream_del when decrementing
up ref_count and it is not the last.
Created ECMP based FIB lookup API.
Testing Done:
Performed following testing on tester setup:
5 x LHR, 4 x MSDP Spines, 6 Sources each sending to 1023 groups from one of the spines.
Total send rate 8Mpps.
Test that caused problems was to reboot every device at the same time.
After fix performed 5 iterations of reboot devices and show no sign of the problem.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
projects / mirror / frr.git / log