Juraj Vijtiuk [Wed, 13 Oct 2021 16:32:53 +0000 (18:32 +0200)]
isisd: fix router capability TLV parsing issues
isis_tlvs.c would fail at multiple places if incorrect TLVs were
received causing stream assertion violations.
This patch fixes the issues by adding missing length checks, missing
consumed length updates and handling malformed Segment Routing subTLVs.
Signed-off-by: Juraj Vijtiuk <juraj.vijtiuk@sartura.hr>
Small adjustments by Igor Ryzhov:
- fix incorrect replacement of srgb by srlb on lines 3052 and 3054
- add length check for ISIS_SUBTLV_ALGORITHM
- fix conflict in fuzzing data during rebase
Donald Sharp [Wed, 10 Nov 2021 21:58:58 +0000 (16:58 -0500)]
zebra: Fix v6 route replace failure turned into success
Currently when we have a route replace operation for v6 routes
with a new nexthop group the order of kernel installation is this:
a) New nexthop group insertion seq 1
b) Route delete operation seq 3
c) Route insertion operation seq 2
Currently the code in nl_batch_read_resp is attempting
to handle this situation by skipping the delete operation.
*BUT* it is enqueuing the context into the zebra dplane
queue before we read the response. Since we create the ctx
with an implied success, success is being reported to the
upper level dplane and the zebra rib thinks the route has
been properly handled.
This is showing up in the zebra_seg6_route test code because
the test code is installing a seg6 route w/ sharpd and it
is failing to install because the route's nexthop is rejected:
a) nexthop installation seq 11
b) route delete seq 13
c) route add seq 12
Note the last line, we report the install as a success but it clearly failed from the seq=12 decode.
When we look at the v6 rib it thinks it is installed:
unet> r1 show ipv6 route
Codes: K - kernel route, C - connected, S - static, R - RIPng,
O - OSPFv3, I - IS-IS, B - BGP, N - NHRP, T - Table,
v - VNC, V - VNC-Direct, A - Babel, D - SHARP, F - PBR,
f - OpenFabric,
> - selected route, * - FIB route, q - queued, r - rejected, b - backup
t - trapped, o - offload failure
So let's modify nl_batch_read_resp to not dequeue/enqueue the context until we are sure we have
the right one. This fixes the test code to do the right thing on the second installation.
Donald Sharp [Wed, 10 Nov 2021 20:09:37 +0000 (15:09 -0500)]
zebra: set zd_is_update in 1 spot
The ctx->zd_is_update is being set in various
spots based upon the same value that we are
passing into dplane_ctx_ns_init. Let's just
consolidate all this into the dplane_ctx_ns_init
so that the zd_is_udpate value is set at the
same time that we increment the sequence numbers
to use.
As a note for future me's reading this. The sequence
number choosen for the seq number passed to the
kernel is that each context gets a copy of the
appropriate nlsock to use. Since it's a copy
at a point in time, we know we have a unique sequence
number value.
Donald Sharp [Wed, 10 Nov 2021 19:12:39 +0000 (14:12 -0500)]
zebra: When we get an implicit or ack or full failure mark status
When nl_batch_read_resp gets a full on failure -1 or an implicit
ack 0 from the kernel for a batch of code. Let's immediately
mark all of those in the batch pass/fail as needed. Instead
of having them marked else where.
Donald Sharp [Wed, 1 Dec 2021 22:03:38 +0000 (17:03 -0500)]
lib: Update hash.h documentation to warn of a possible crash
Multiple deletions from the hash_walk or hash_iteration calls
during a single invocation of the passed in function can and
will cause the program to crash. Warn against doing such a
thing.
Donald Sharp [Wed, 1 Dec 2021 21:28:42 +0000 (16:28 -0500)]
zebra: Ensure zebra_nhg_sweep_table accounts for double deletes
I'm seeing this crash in various forms:
Program terminated with signal SIGSEGV, Segmentation fault.
50 ../sysdeps/unix/sysv/linux/raise.c: No such file or directory.
[Current thread is 1 (Thread 0x7f418efbc7c0 (LWP 3580253))]
(gdb) bt
(gdb) f 4
267 (*func)(hb, arg);
(gdb) p hb
$1 = (struct hash_bucket *) 0x558cdaafb250
(gdb) p *hb
$2 = {len = 0, next = 0x0, key = 0, data = 0x0}
(gdb)
I've also seen a crash where data is 0x03.
My suspicion is that hash_iterate is calling zebra_nhg_sweep_entry which
does delete the particular entry we are looking at as well as possibly other
entries when the ref count for those entries gets set to 0 as well.
Then we have this loop in hash_iterate.c:
for (i = 0; i < hash->size; i++)
for (hb = hash->index[i]; hb; hb = hbnext) {
/* get pointer to next hash bucket here, in case (*func)
* decides to delete hb by calling hash_release
*/
hbnext = hb->next;
(*func)(hb, arg);
}
Suppose in the previous loop hbnext is set to hb->next and we call
zebra_nhg_sweep_entry. This deletes the previous entry and also
happens to cause the hbnext entry to be deleted as well, because of nhg
refcounts. At this point in time the memory pointed to by hbnext is
not owned by the pthread anymore and we can end up on a state where
it's overwritten by another pthread in zebra with data for other incoming events.
What to do? Let's change the sweep function to a hash_walk and have
it stop iterating and to start over if there is a possible double
delete operation.
When I run pimd. Looking at the code there are 3 places where pim_bsm.c removes the
NHT BSR tracking. In 2 of them the code ensures that the address is already setup
in 1 place it is not. Fix.
Donald Sharp [Mon, 24 Jan 2022 12:02:37 +0000 (07:02 -0500)]
bgpd: Prevent use after variable goes out of scope
`struct prefix p` was declared inside an if statement
where we assign the address of to a pointer that is
then passed to a sub function. This will eventually
leave us in a bad state.
Tomi Salminen [Wed, 2 Feb 2022 09:19:09 +0000 (11:19 +0200)]
ospfd: Core in ospf_if_down during shutdown.
Skip marking routes as changed in ospf_if_down if there's now
new_table present, which might be the case when the instance is
being finished
The backtrace for the core was:
raise (sig=sig@entry=11) at ../sysdeps/unix/sysv/linux/raise.c:50
core_handler (signo=11, siginfo=0x7fffffffe170, context=<optimized out>) at lib/sigevent.c:262
<signal handler called>
route_top (table=0x0) at lib/table.c:401
ospf_if_down (oi=oi@entry=0x555555999090) at ospfd/ospf_interface.c:849
ospf_if_free (oi=0x555555999090) at ospfd/ospf_interface.c:339
ospf_finish_final (ospf=0x55555599c830) at ospfd/ospfd.c:749
ospf_deferred_shutdown_finish (ospf=0x55555599c830) at ospfd/ospfd.c:578
ospf_deferred_shutdown_check (ospf=<optimized out>) at ospfd/ospfd.c:627
ospf_finish (ospf=<optimized out>) at ospfd/ospfd.c:683
ospf_terminate () at ospfd/ospfd.c:653
sigint () at ospfd/ospf_main.c:109
quagga_sigevent_process () at lib/sigevent.c:130
thread_fetch (m=m@entry=0x5555556e45e0, fetch=fetch@entry=0x7fffffffe9b0) at lib/thread.c:1709
frr_run (master=0x5555556e45e0) at lib/libfrr.c:1174
main (argc=9, argv=0x7fffffffecb8) at ospfd/ospf_main.c:254
Signed-off-by: Tomi Salminen <tsalminen@forcepoint.com>
Olivier Dugeon [Wed, 2 Feb 2022 15:56:30 +0000 (16:56 +0100)]
tests: Add CSPF topotest
Add new topotest for the Constraints ShortestPath First (CSPF) algorithm.
This topotest uses IS-IS-TE as base network to populate a Traffic Engineering
Database (TED) and sharpd to call cspf algorithms on this IS-IS-TE topology.
Olivier Dugeon [Fri, 21 Jan 2022 18:02:35 +0000 (19:02 +0100)]
sharpd: Add call to CSPF
New Constaint Shortest Path First algorithm has been introduce in FRR library.
Add a new 'show sharp cspf' command as example of how to use these
CSPF algorithm.
Olivier Dugeon [Thu, 13 Jan 2022 09:15:51 +0000 (10:15 +0100)]
lib: Add CSPF Path Computation algorithm
As helper function of Segment Routing Flex Algo or RSVP-TE
add Constrained Shortest Path First algorithm able to compute
path with constraints. Supported constraints are as follow:
- Standard IGP metric
- TE IGP metric
- Delay metric
- Bandwidth for given Class of Service for bandwidth reservation (RSVP-TE)
Usage of CSPF algorithms is detailed in the doc/developer/cspf.rst file
Olivier Dugeon [Mon, 24 Jan 2022 16:09:29 +0000 (17:09 +0100)]
lib: Correct bug for TE metric wrong assignement
When link-param is enabled for a given interface, TE metric is automatically
assigned to the metric of the interface. However, the metric of the interface
could be unassigned and keep the default value equal to 0. Thus, if the TE
metric is not explicitely modified within the `link-param metric` statement,
TE metric remains set to 0 which is not a valid value especially when
computing constrainted path.
This patch changes the assignement of the default value of the TE metric.
It is set to the metric of the interface only if the latter is not equal to 0.
TE topotests for OSPF and IS-IS have been adjusted accordingly.
Passing argument "&rec" of type "struct pfx_record *" and argument
"1UL" to function "read" is suspicious because
"sizeof (struct pfx_record) /*40*/" is expected.
anlan_cs [Wed, 19 Jan 2022 07:10:18 +0000 (02:10 -0500)]
bfdd: fix broken FSM in passive mode
Problem:
One is with active mode, the other is with passive mode. Sometimes
the one with active mode is in `Down` stauts, but the other one
with passive mode is unluckily stuck in `Init` status:
It doesn't answer its peer with any packets, even receiving continuous
`Down` packets.
Root Cause:
bfdd with passive mode answers its peer only *one* packet in `Down` status,
then it enters into `Init` status and ignores subsequent `Down` packets.
Unluckily that *one* answered packet is lost, at that moment its peer
with active mode can only have to send `Down` packets.
Fix:
1) With passive mode, bfdd should start xmittimer after received `Down` packet.
Refer to RFC5880:
"A system taking the Passive role MUST NOT begin sending BFD packets for
a particular session until it has received a BFD packet for that session, and
thus has learned the remote system's discriminator value."
2) Currently this added xmittimer for passive mode can be safely removed
except receiving `AdminDown` packet:
- `bfd_session_enable/bfd_set_passive_mode` doesn't start xmittimer
- `ptm_bfd_sess_dn/bfd_set_shutdown` can remove xmittimer
Per RFC5880, receiving `AdminDown` packet should be also regarded as `Down`,
so just call `ptm_bfd_sess_dn`, which will safely remove the added xmittimer
for passive mode. In summary, call `ptm_bfd_sess_dn` for two status changes
on receiving `AdminDown`: `Init`->`Down` and `Up`->`Down`.
Mark Stapp [Tue, 1 Feb 2022 18:41:17 +0000 (13:41 -0500)]
zebra: reduce incoming netlink messages for dplane thread
The dataplane pthread only processes a limited set of incoming
netlink notifications: only register for that set of events,
reducing duplicate incoming netlink messages.
Igor Ryzhov [Sun, 23 Jan 2022 17:22:42 +0000 (20:22 +0300)]
zebra: fix cleanup of meta queues on vrf disable
Current code treats all metaqueues as lists of route_node structures.
However, some queues contain other structures that need to be cleaned up
differently. Casting the elements of those queues to struct route_node
and dereferencing them leads to a crash. The crash may be seen when
executing bgp_multi_vrf_topo2.
Fix the code by using the proper list element types.
ckishimo [Mon, 31 Jan 2022 22:58:14 +0000 (23:58 +0100)]
ospfd: restart spf when distance is updated
if r1 has a route received from a neighbor with the default administrative
distance configured
r1# sh ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, F - PBR,
f - OpenFabric,
> - selected route, * - FIB route, q - queued, r - rejected, b - backup
t - trapped, o - offload failure
O>* 1.1.1.1/32 [110/20] via 10.0.12.2, r1-r2-eth0, weight 1, 00:00:41
this is not applied as there are no changes in the routing table
r1# sh ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, F - PBR,
f - OpenFabric,
> - selected route, * - FIB route, q - queued, r - rejected, b - backup
t - trapped, o - offload failure
O>* 1.1.1.1/32 [110/20] via 10.0.12.2, r1-r2-eth0, weight 1, 00:00:13
This commit will force the update of the routing table with the new configured distance
r1# sh ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, F - PBR,
f - OpenFabric,
> - selected route, * - FIB route, q - queued, r - rejected, b - backup
t - trapped, o - offload failure
O>* 1.1.1.1/32 [50/20] via 10.0.12.2, r1-r2-eth0, weight 1, 00:00:14
projects / mirror / frr.git / log