Chirag Shah [Mon, 26 Jun 2023 22:29:59 +0000 (15:29 -0700)]
zebra: fix evpn rmac nh list cmp function
EVPN RMAC (Router MAC) nexthop list compare
function needs to return all values so
the list element can be compared and added/deleted
properly.
Ticket:#3486989
Testing Done:
Originate EVPN Type-5 route with PIP IP and MAC as remote
nexthops.
Change the PIP IP address which triggers nexthop change.
Before fix:
When PIP IP changes RMAC is deleted from remote VTEPs.
TORS1# show evpn next-hops vni 4001 | include 00:02:00:00:00:2d
27.0.0.11 00:02:00:00:00:2d
TORS1# show evpn rmac vni 4001 | include 00:02:00:00:00:2d
00:02:00:00:00:2d 27.0.0.11
----- Remote VTEP change nexthop IP to 172.16.16.16 -----
TORS1# show evpn next-hops vni 4001 | include 00:02:00:00:00:2d
172.16.16.16 00:02:00:00:00:2d
TORS1# show evpn rmac vni 4001 | include 00:02:00:00:00:2d
TORS1#
After fix:
RMAC is retained as its nexthop list is not empty,
thus it is not deleted from remote VTEPs.
TORS1# show evpn rmac vni 4001 | include 00:02:00:00:00:2d
00:02:00:00:00:2d 172.16.16.16
add support of color extended community, conforming to RFC 9012.
This extended community will be added to the existing one, RT,SOO
and Node Target. The configuration will be made through the
route-map service.
Christian Hopps [Sun, 25 Jun 2023 12:13:25 +0000 (08:13 -0400)]
tools: less aggressive settings for clang-format
- Reports were that the current settings were choosing to extend beyond 80
columns too often. This change makes that more expensive but still tries
very hard to not break before first open parenthesis of function calls.
Mark Stapp [Wed, 31 May 2023 20:25:15 +0000 (16:25 -0400)]
zebra: support notifications for opaque ZAPI messages
Allow zapi clients to register to be notified when a server
for an opaque message type is present. Zebra maintains these
notification registrations in the same data structures that it
uses for opaque message handling.
Mark Stapp [Wed, 31 May 2023 20:22:16 +0000 (16:22 -0400)]
lib: add notifications for opaque zapi messages
Add a new notification zapi message type. A zapi client
that uses opaque messages can register to be notified
when a server for an opaque type is present.
Mark Stapp [Mon, 29 May 2023 17:04:24 +0000 (13:04 -0400)]
lib, zebra: include source client zapi info in opaque messages
Include the sending zapi client info (proto, instance, and
session id) in each opaque zapi message. Add opaque 'init'
apis for clients who want to encode their opaque data inline,
into the zclient's internal stream buffer. Use these init apis
in the TE/link-state lib code, instead of hand-coding the
zapi opaque header info.
Sai Gomathi N [Wed, 21 Jun 2023 09:53:09 +0000 (02:53 -0700)]
pim, pim6d: pimreg interface is not getting added in a certain scenario
Problem:
When ipv6 pim configuration is removed from the IIF on FHR node,
if we wait for RST timer to expire and then add the ipv6 pim configuration on the IIF again,
it is seen that pimreg is not getting added due to which null register wont be sent,
the register flag state also remains NO_INFO forever instead of RegPrune.
The reason for this is, when RST timer expires and IIF is unknown for the (S,G) upstream,
the FHR state is not reset due to which when the RP becomes reachable,
upstream state changes from NotJoined to Join but the register suppress timer could not be started
since we see there is no change in FHR state.
Fix:
When the Register Timer expires and the reg state is set to PIM_REG_NOINFO,reset the FHR flag,
so that when the RP becomes reachable can be because of config change or RP not reachable,
it is able to resume its duty.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Donatas Abraitis [Sun, 18 Jun 2023 19:07:54 +0000 (22:07 +0300)]
zebra: Show session id when printing an error when the client disconnects
Before:
```
2023/06/18 22:00:42 ZEBRA: [VXKFG-8SJRV][EC 4043309121] Client 'bgp' encountered an error and is shutting down.
2023/06/18 22:00:42 ZEBRA: [VXKFG-8SJRV][EC 4043309121] Client 'bgp' encountered an error and is shutting down.
```
After:
```
2023/06/18 22:06:44 ZEBRA: [N5M5Y-J5BPG][EC 4043309121] Client 'bgp' (session id 0) encountered an error and is shutting down.
2023/06/18 22:06:44 ZEBRA: [N5M5Y-J5BPG][EC 4043309121] Client 'bgp' (session id 1) encountered an error and is shutting down.
```
Donatas Abraitis [Mon, 12 Jun 2023 14:09:52 +0000 (17:09 +0300)]
bgpd: Use synchronous way to get labels from Zebra
Both the label manager and table manager zapi code send data requests via zapi
to zebra and then immediately listen for a response from zebra. The problem here
is of course that the listen part is throwing away any zapi command that is not
the one it is looking for.
ISIS/OSPF and PIM all have synchronous abilities via zapi, which they all
do through a special zapi connection to zebra. BGP needs to follow this model
as well. Additionally the new zclient_sync connection that should be created,
a once a second timer should wake up and read any data on the socket to
prevent problems too much data accumulating in the socket.
topotests: label per nexthop test adds add a while loop for mpls table
The bgp_vpnv4_per_nexthop_label tests only check to see if the mpls labels
are installed one time. Test runs show that all but one label is installed.
More than likely the test has asked for data while zebra is still installing
it. the mpls_label_check functions must check this result multiple times as
that system may be under heavy load.
A loop is introduced in order to let zebra check the mpls table.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
topotests: structural issues in bgp_local_as_dotplus_private_remove
This test has several issues:
A) The convergence function is spamming the show neighbor command until success,
if the neighbor never comes up the test will never finish. This adds unnecessary
load to an already loaded test system. Use run_and_expect to properly wait for
the neighbor relationship to come up.
B) The convergence function should not sleep for 1 second *After* the neighbor
is established
C) The _bgp_as_path() function fails if the prefix has not been received yet.
This looking for the prefix data should be within a run_and_expect() functionality.
Else a loaded test system will fail in this function because while we may be in
an established state, prefixes might not yet have been exchanged and there is no
point in failing the test without giving the system some time to actually converge.
Fix those points, similarly to what has been fixed in
bgp_local_as_private_remove test.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
David Ward [Mon, 19 Jun 2023 20:00:38 +0000 (16:00 -0400)]
ospf6d: Increment sequence number correctly in Authentication Trailer
According to RFC 7166, the sequence number should be treated as an
unsigned 64-bit value, although it is stored as two 32-bit values.
When incrementing it, the code caused the lower-order 32-bit value
to skip from 0xFFFFFFFE to 0. As a side effect, an error was never
produced if the full 64-bit sequence number wrapped.
Fixes: #13805 Signed-off-by: David Ward <david.ward@ll.mit.edu>
Christian Hopps [Sun, 18 Jun 2023 20:19:54 +0000 (16:19 -0400)]
mgmtd: KISS the locking code
Move away from things like "lock if not locked" type code, require the
user has locked prior to geting to that point.
For now we warn if we are taking a lock we already had; however, this
should really be a failure point.
New requirements:
SETCFG -
not implicit commit - requires user has locked candidate DS and they
must unlock after
implicit commit - requires user has locked candidate and running DS
both locks will be unlocked on reply to the SETCFG
COMMITCFG -
requires user has locked candidate and running DS and they must unlock
after
rollback - this code now get both locks and then does an unlock and
early return thing on the adapter side. It needs to be un-special
cased in follow up work that would also include tests for this
functionality.
projects / matthieu / frr.git / log