Michael Hohl [Wed, 11 Nov 2020 15:56:15 +0000 (16:56 +0100)]
docs: mention activate keyword in user docs
As of now, the BGP user documentation does not explicitly mention how
to use IPv6. This commit adds documentation of the activate command to
the user documentation which is crucial to get IPv6 networks announced
using FRRouting.
Mark Stapp [Tue, 10 Nov 2020 19:14:23 +0000 (14:14 -0500)]
tests: reduce scale of the route scale test
Reduce the number of routes used in the route-scale test: we're
having memory troubles, and this may help the CI run with fewer
false failures. Also re-orged the route-scale test code a bit
so it can be driven from the json file, with fewer hard-coded
values.
Mark Stapp [Tue, 10 Nov 2020 14:50:50 +0000 (09:50 -0500)]
tests: only test count of nexthops in bgp max-paths test
Add support to compare the number of RIB nexthops, rather than the
specific nexthop addresses. Use this in the bgp_ecmp topotests that
test maximum-paths - testing the specific nexthops is wrong there,
it's not deterministic and we get spurious failures.
Donald Sharp [Fri, 6 Nov 2020 01:42:03 +0000 (20:42 -0500)]
bgpd: Actually return the group peer
The code is returning the group peer data structure, which
is what is happening but we should not have assignment statements
in this return statement for a `struct peer *` return.
Donald Sharp [Fri, 30 Oct 2020 17:34:30 +0000 (13:34 -0400)]
bgpd: Remove pointer structure from `struct bgp_dest`
The `struct listnode *rt_node` data structure is adding
8 bytes of size to the `struct bgp_dest`. This is a large
amount of data for a flag we are already setting on each
node for this. Just set the flag and use that to figure
out who we are doing graceful restart on.
Renato Westphal [Sat, 24 Oct 2020 00:05:30 +0000 (21:05 -0300)]
isisd: detect Prefix-SID collisions and handle them appropriately
isisd relies on its YANG module to prevent the same SID index
from being configured multiple times for different prefixes. It's
possible, however, to have different routers assigning the same SID
index for different prefixes. When that happens, we say we have a
Prefix-SID collision, which is ultimately a misconfiguration issue.
The problem with Prefix-SID collisions is that the Prefix-SID that
is processed later overwrites the previous ones. Then, once the
Prefix-SID collision is fixed in the configuration, the overwritten
Prefix-SID isn't reinstalled since it's already marked as installed
and it didn't change. To prevent such inconsistency from happening,
add a safeguard in the SPF code to detect Prefix-SID collisions and
handle them appropriately (i.e. log a warning + ignore the Prefix-SID
Sub-TLV since it's already in use by another prefix). That way,
once the configuration is fixed, no Prefix-SID label entry will be
missing in the LFIB.
Reported-by: Emanuele Di Pascale <emanuele@voltanet.io> Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Donald Sharp [Wed, 4 Nov 2020 16:48:49 +0000 (11:48 -0500)]
zebra: Rework code to make SA happy
Clan SA was saying:
./zebra/zebra_vty_clippy.c: In function ‘show_route’:
zebra/zebra_vty.c:1775:4: warning: ‘zvrf’ may be used uninitialized in this function [-Wmaybe-uninitialized]
do_show_ip_route_all(vty, zvrf, afi, !!fib, !!json, tag,
^
I do not see a way that zvrf could ever be uninited in the code path
but rearrange the code a tiny bit to make it happier.
Donald Sharp [Tue, 3 Nov 2020 20:24:03 +0000 (15:24 -0500)]
bgpd: Allow 1 prefix to generate statistics
When generating a config with 1 prefix:
BGP IPv4 Unicast RIB statistics
Total Advertisements : 0
Total Prefixes : 0
Average prefix length : 0.00
Unaggregateable prefixes : 0
Maximum aggregateable prefixes: 0
BGP Aggregate advertisements : 0
Address space advertised : 0
% announced : 0.00
/8 equivalent : 0.00
/24 equivalent : 0.00
Advertisements with paths : 0
Longest AS-Path (hops) : 0
Average AS-Path length (hops) : 0.00
Largest AS-Path (bytes) : 0
Average AS-Path size (bytes) : 0.00
Highest public ASN : 0
eva# show bgp ipv4 uni summ
BGP router identifier 10.10.3.11, local AS number 329 vrf-id 0
BGP table version 1
RIB entries 1, using 192 bytes of memory
Peers 1, using 23 KiB of memory
We are not displaying it in the statistics data. This is because FRR is walking the associated
table and comparing the current dest to the top of the tree. I have no idea why this is
the case as that when you have 1 prefix you only have 1 node in your tree. Looking at the
code this is the original code that was imported in 2006. I cannot think of any reason why
FRR needs to exclude this particular node.
Fixed:
eva# show bgp ipv4 uni summ
BGP router identifier 10.10.3.11, local AS number 329 vrf-id 0
BGP table version 1
RIB entries 1, using 192 bytes of memory
Peers 1, using 23 KiB of memory
Donald Sharp [Mon, 2 Nov 2020 15:14:48 +0000 (10:14 -0500)]
bgpd: Multipath is always being allocated
The multipath arrays are always being allocated, irrelevant
if we actually have multipath information for a prefix.
This is because the link bandwidth code was always adding the
data structure. We should not be allocated multipath information
unless we actually have multipath information
ospfd: OSPF external LSA summarisation show commands
Description:
The below show command introduced to diplay all configured
summary addresss information along with matching corresponding
external route information.
show ip ospf [vrf <NAME|all>] summary-address [detail] [json]
rgirada [Sat, 15 Aug 2020 08:27:40 +0000 (01:27 -0700)]
ospfd: Summarisation init/de-init.
Description:
Summarisation initilisation and de-init apis.
summary route table will be created as part of initilisation
at the time of ospf deamon init.
Description:
Added json support to ospf lsdb command and its subcommands.
Added json to the following sub commands.
show ip ospf database json
show ip ospf database router json
show ip ospf database network json
show ip ospf database external json
show ip ospf database summary json
show ip ospf database asbr-summary json
show ip ospf database nssa-external json
show ip ospf databas max-age json
show ip ospf database self-originate json
Stephen Worley [Fri, 30 Oct 2020 20:14:40 +0000 (16:14 -0400)]
bgpd: fix help for ipv6 under distance src command
We were missing the help docstring for IPV6 under the
distance src command in for bgp.
```
[root@alfred frr-2]# /usr/lib/frr/bgpd --log stdout --log-level debug
2020/10/30 16:02:26 BGP: Ran out of docstring while parsing '[no] distance (1-255) <A.B.C.D/M | X:X::X:X/M>$prefix [WORD$acl]'
2020/10/30 16:02:26 BGP: Ran out of docstring while parsing '[no] distance (1-255) <A.B.C.D/M | X:X::X:X/M>$prefix [WORD$acl]'
2020/10/30 16:02:26 BGP: Ran out of docstring while parsing '[no] distance (1-255) <A.B.C.D/M | X:X::X:X/M>$prefix [WORD$acl]'
2020/10/30 16:02:26 BGP: Ran out of docstring while parsing '[no] distance (1-255) <A.B.C.D/M | X:X::X:X/M>$prefix [WORD$acl]'
2020/10/30 16:02:26 BGP: Ran out of docstring while parsing '[no] distance (1-255) <A.B.C.D/M | X:X::X:X/M>$prefix [WORD$acl]'
```
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Mark Stapp [Fri, 30 Oct 2020 14:51:54 +0000 (10:51 -0400)]
zebra: add optional extra data about routes' interfaces
Add extra data about the interfaces used in route updates'
nexthops - some consumers of route updates may want additional
data, but dataplane plugins running in the dplane pthread
cannot safely access the normal zebra data structures. Capturing
this info is optional - a plugin must request it (via an api).
projects / mirror / frr.git / log