Donald Sharp [Wed, 14 Jun 2023 16:25:18 +0000 (12:25 -0400)]
bgpd: some safi's do not mix with bgp suppress-fib
BGP cannot decide to disseminate the safi based upon the
bgp suppress-fib command. Modify the code to look at
the safi for the decision to communicate to a peer the
particular node.
Ticket: #3402926 Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Donatas Abraitis [Tue, 13 Jun 2023 13:08:24 +0000 (16:08 +0300)]
bgpd: Use enum bgp_create_error_code as argument in header
```
bgpd/bgp_vty.c:865:5: warning: conflicting types for ‘bgp_vty_return’ due to enum/integer mismatch; have ‘int(struct vty *, enum bgp_create_error_code)’ [-Wenum-int-mismatch]
865 | int bgp_vty_return(struct vty *vty, enum bgp_create_error_code ret)
| ^~~~~~~~~~~~~~
In file included from ./bgpd/bgp_mplsvpn.h:15,
from bgpd/bgp_vty.c:48:
./bgpd/bgp_vty.h:148:12: note: previous declaration of ‘bgp_vty_return’ with type ‘int(struct vty *, int)’
148 | extern int bgp_vty_return(struct vty *vty, int ret);
| ^~~~~~~~~~~~~~
```
Donatas Abraitis [Tue, 13 Jun 2023 13:01:40 +0000 (16:01 +0300)]
bgpd: Use enum bgp_fsm_state_progress for bgp_stop()
```
bgpd/bgp_fsm.c:1360:29: warning: conflicting types for ‘bgp_stop’ due to enum/integer mismatch; have ‘enum bgp_fsm_state_progress(struct peer *)’ [-Wenum-int-mismatch]
1360 | enum bgp_fsm_state_progress bgp_stop(struct peer *peer)
| ^~~~~~~~
In file included from bgpd/bgp_fsm.c:29:
./bgpd/bgp_fsm.h:111:12: note: previous declaration of ‘bgp_stop’ with type ‘int(struct peer *)’
111 | extern int bgp_stop(struct peer *peer);
| ^~~~~~~~
```
Christian Hopps [Fri, 9 Jun 2023 20:54:54 +0000 (16:54 -0400)]
lib: mgmtd: improvements in logging and commentary
- log names of datastores not numbers
- improve logging for mgmt_msg_read
- Rather than use a bool, instead store the pending const string name of
the command being run that has postponed the CLI. This adds some nice
information to the logging when enabled.
pimd,pim6d: Correct the socket to send reg-stop msg
We were using the pim interface socket to send the register
stop msg, it works fine in cases where the interface on which
register msg is received and the interface on which the register-stop
msg is supposed to be sent is the same.
But when the interfaces are different, msg send fails because
the outgoing interface is not right.
Mark Stapp [Tue, 23 May 2023 19:31:31 +0000 (15:31 -0400)]
pbrd, zebra: fix zapi and netlink rule encoding
In pbrd, don't encode a rule without a table. There are cases
where the zapi encoding was incorrect because the 4-octet
table id was missing. In zebra, mask off the ECN bits in the
TOS byte when encoding an iprule to match netlink's
expectation.
Donald Sharp [Wed, 7 Jun 2023 14:09:27 +0000 (10:09 -0400)]
bgpd: Add some color to why nexthop_set failed
We are seeing some frequent test failures with
setting the nexthop correctly. At this point
in time, I have no idea what is going wrong,
but I don't have a bunch of information either,
so let's add the local and remote values.
Christian Hopps [Mon, 12 Jun 2023 02:13:48 +0000 (22:13 -0400)]
lib: mgmtd: session create and destroy both short-circuit
For creation this is the first thing done so short-circuit just means inline
sync response. However, for destroy there could be commands in-flight, these
will be discarded when they match no session, and the state cleaned up
immediately when the message short-circuits.
Christian Hopps [Sun, 11 Jun 2023 21:53:10 +0000 (17:53 -0400)]
vtysh: stop reading config file if user `exit`s from root level.
This is required to make sure that we properly send the
XFRR_end_configuration tag to the daemons. Previously if the user had an
`exit` at the root level the parser would just drop out of the config
node and so XFRR_end_configuration, even if sent, would be ignored
Abhishek N R [Mon, 12 Jun 2023 04:54:24 +0000 (21:54 -0700)]
pim6d: Correcting the help string
Max response time in the code is being used as decisecond but the user input is taken in millisecond.
Also yang expects the field to be in decisecond.
The below condition in yang is failing due to the mismatch in units.
```
units deciseconds;
must ". <= ../query-interval * 10";
```
Donald Sharp [Thu, 8 Jun 2023 16:03:49 +0000 (12:03 -0400)]
zebra: Prevent crash because nl is NULL on shutdown
When shutting down the main pthread was first closing
the sockets associated with the dplane pthread and
then telling it to shutdown the pthread at a later point
in time. This caused the dplane to crash because the nl
data has been freed already. Change the shutdown order
to stop the dplane pthread *and* then close the sockets.
Christian Hopps [Thu, 8 Jun 2023 08:12:26 +0000 (04:12 -0400)]
tests: convert old pim test to more cleanly use pytest fixture
This is a good way to run a per-test background helper process. Here the
helper object is created before the test function requesting it (through param
name match), and then cleaned up after the test function exits (pass or failed).
A context manager is used to further guarantee the cleanup is done.
Christian Hopps [Thu, 8 Jun 2023 06:42:32 +0000 (02:42 -0400)]
tests: fixing pim6 topotest bugs
- Remove use of bespoke socat
- Use ipv6 support in mcast-tester.py
- do not run processes in the background behind munet/micronet's
back with `&` (ever) -- use popen or the helper class
pimd, pim6d: Move mld/igmp deletion code to a common api
Move the mld/igmp deletion common code to api pim_gm_interface_delete
code for IPv6 deletion(gm_ifp_teardown) for MLD was missing in this flow
Making the code common fixes this too.
Move pim_if_membership_clear api from pimd/pim_nb_config.c
to pimd/pim_iface.c
Also fixed curly braces warning
WARNING: braces {} are not necessary for single statement blocks
1773: FILE: /tmp/f1-127504/pim_iface.c:1773:
Christian Hopps [Tue, 6 Jun 2023 19:12:58 +0000 (15:12 -0400)]
mgmtd: assert an assertion for coverity
I believe coverity can't tell the length of the return value from strftime based
on the format string (like we can), so it allows `n` to be larger than it could
be which then allows `sz - n` to be negative which is size_t positive and very
large so it thinks an overrun is possible.
Chirag Shah [Tue, 6 Jun 2023 04:48:12 +0000 (21:48 -0700)]
tools: fix list value remove in frr-reload
There might be a time element(s) from
temporary list are removed more than once
which leads to valueError in certain python3
version.
commit-id 1543f58b5 did not handle valueError
properly. This caused regression where
prefix-list config leads to delete followed
by add.
The new fix should just pass the exception as
value removal from list_to_add or list_to_del
is best effort.
This allows prefix-list config has no change
then removes the lines from lines_to_del and
lines_to_add properly.
Configure prefix-list in frr.conf and perform
multiple frr-reload. After first reload operatoin
subsequent ones should not result in delete followed
by add of the prefix-list but rather no-op operation.
projects / matthieu / frr.git / log