Stephen Worley [Tue, 26 Mar 2019 05:03:06 +0000 (01:03 -0400)]
zebra: Fix extended ack error message parsing
Fix the macros for reading NLA attribute info
from an extended error ack. We were processing the data
using route attributes (rtattr) which is identical in size
to nlattr but probably should not be used.
Further, we were incorrectly calculating the length of the
inner netlink message that cause the error. We have to read
passed that in order to access all the nlattr's.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Saravanan K [Mon, 25 Mar 2019 13:23:17 +0000 (06:23 -0700)]
ospfd: Remaining packet calculation while fragmenting lsu, ls-ack and ls-req
While fragmenting ospf ls packets, before appending the link state info,
wrong value is checked to see if current packet can fit in another ls info.
Because of this, when a lower mtu is configured, it couldn't fit in even 1
ls ack, which tries to send all the available ls ack in the list in loop.
This keeps allocating memory to send the packet and ends up putting the
packet buffer without ls-ack into deferred send que(ospf_ls_ack_send_delayed).
This infinite loop causes infinite memory being allocated in a loop causing
system to be unstable. This commit takes care of calculating the right value
to compare for checking oif this buffer can fit in more.
Signed-off-by: Saravanan K <saravanank@vmware.com>
Quentin Young [Fri, 22 Mar 2019 18:14:17 +0000 (18:14 +0000)]
doc: update instructions for building libyang
* Upstream libyang now works with FRR; use it
* Install libyang to system library directories to satisfy pkg-config
* Remove warnings about ABI version
* Remove outdated binary package links
* Cleanup formatting
Validated that these instructions work on:
- Fedora 24
- Fedora 28.
- Ubuntu 18.04
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Donald Sharp [Sun, 17 Mar 2019 01:25:59 +0000 (21:25 -0400)]
bfdd: Prevent uninited use of data
Running valgrind w/ bfdd and shut/no shuting interfaces
can result in this valgrind issue:
==20279== Conditional jump or move depends on uninitialised value(s)
==20279== at 0x115848: bfdd_sessions_enable_address (ptm_adapter.c:644)
==20279== by 0x115848: bfdd_interface_address_update (ptm_adapter.c:674)
==20279== by 0x48D8CAB: zclient_read (zclient.c:2698)
==20279== by 0x48CCEE3: thread_call (thread.c:1603)
==20279== by 0x48A84EF: frr_run (libfrr.c:1011)
==20279== by 0x10DAC3: main (bfdd.c:236)
==20279==
When creating the bso data structure set the bso_isaddress to false
as a default value.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Chirag Shah [Wed, 20 Mar 2019 00:06:10 +0000 (17:06 -0700)]
bgpd: l3vni add-del handle non-defualt rd
During L3VNI add, non-default RD value is not replayed
correctly. Instead of picking non-default value it picks
up auto RD value which is derived based on router-id.
Indentation issue: Remove additional space from
L3VNI running config output.
Bring up evpn configuration with L3vni up with non-default
RD value, perform peerlink flap, l3vni flap which removes
all VNIS and readds with RD and RT values.
The configured RD and RTs are replayed.
Chirag Shah [Wed, 13 Mar 2019 01:41:01 +0000 (18:41 -0700)]
bgpd: router mac same as self skip route install
When a bgp-peer comes up prior to l3vnis are up in bgpd.
The EVPN routes (type-2/type-5) are learnt via peer.
The routes can have one of interface's MAC in rmac attribute.
The self rmac check would bypass as l3vni is not present.
Once l3vni has come up in bgpd, while installing evpn
routes in vrf table, perform rmac attribute check against self mac.
The routes with rmac of ours will be removed via re-scan
of routes during bgp_mac_rescan_all_evpn_tables when
interface mac is added to bgp.
zebra: EVPN DAD trigger was causing zebra to crash
Duplicate address detection and recovery was relying on the l2-vni backptr
in the neighbor entry which was simply not initialized resulting in
a NULL pointer access in a setup with dup-addressed VMs -
VM1:{IP1,M1} and VM2:{IP1,M2}
Call stack:
(gdb) bt 6
at lib/sigevent.c:249
nbr=nbr@entry=0x559347f901d0, vtep_ip=..., vtep_ip@entry=..., do_dad=do_dad@entry=true,
is_dup_detect=is_dup_detect@entry=0x7ffc7f6be59f, is_local=is_local@entry=true)
at ./lib/ipaddr.h:86
ip=0x7ffc7f6be6f0, ifp=0x559347f901d0, zvni=0x559347f86800) at zebra/zebra_vxlan.c:3152
(More stack frames follow...)
(gdb) p nbr->zvni
$8 = (zebra_vni_t *) 0x0 <<<<<<<<<<<<<<<<<<<<
(gdb)
Donald Sharp [Mon, 11 Mar 2019 13:39:19 +0000 (09:39 -0400)]
zebra: System routes sometimes can not be properly selected
System Routes if received over the netlink bus in a
specific pattern that causes an update operation for that
route in zebra can leave the dest->selected_fib pointer NULL,
while having the ZEBRA_FLAG_SELECTED flag set. Specifically
one way to achieve this is to do this:
`ip addr del 4.5.6.7/32 dev swp1 ; ip addr add 4.5.6.7/32 dev swp1 metric 9`
Why is this a big deal?
Because nexthop tracking is looking at ZEBRA_FLAG_SELECTED to
know if we can use a route, while nexthop active checking uses
dest->selected_fib.
So imagine we have bgp registering a nexthop. nexthop tracking in
the above case will be able to choose the 4.5.6.7/32 route
if that is what the nexthop is, due to the ZEBRA_FLAG_SELECTED being
properly set. BGP then allows the peers connection to come up and we
install routes with a 4.5.6.7 nexthop. The rib processing for route
installation will then look at the 4.5.6.7 route see no
dest->selected_fib and then start walking up the tree to resolve
the route. In our case we could easily hit the default route and be
unable to resolve the route. Which then becomes inactive in the
rib so we never attempt to install it.
This commit fixes this problem because when the rib_process decides
that we need to update the fib( ie replace old w/ new ), the
replacement with new was not setting the `dest->selected_fib` pointer
to the new route_entry, when the route was a system route.
Ticket: CM-24203 Signed-off-by: Donald Sharp <sharpd@cumulusnetworkscom>
Don Slice [Thu, 14 Mar 2019 15:17:47 +0000 (15:17 +0000)]
bgpd: fix redistribution into vrf when networking is restarted
Found that previous fix for this issue caused collatoral damage and
reverted that fix. This fix clears the vrf_bitmaps when the vrf is
disabled/deleted and then re-applies the redist config when the vrf
is re-enabled.
Ticket: CM-24231 Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Rafael Zalamena [Mon, 11 Mar 2019 18:09:15 +0000 (15:09 -0300)]
bfdd: change session lookup data structure
Use simplier data structure key to avoid having to do complex and
error-prone key building (e.g. avoid expecting caller to know IPv6
scope id, interface index, vrf index etc...).
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Donald Sharp [Fri, 8 Mar 2019 15:46:55 +0000 (10:46 -0500)]
zebra: Add some debugs to neighbor entry processing
When we get a neighbor entry in zebra we start processing it.
Let's add some additional debugs to the processing so that when
it bails out and we don't use the data, we know the reason.
This should help in debugging the problems from why bgp does
not appear to have data associated with a neighbor entry
in the kernel.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Chirag Shah [Thu, 7 Mar 2019 20:36:47 +0000 (12:36 -0800)]
bgpd: vrl route-leak show with all vrfs option
VRF Route Leak's
show bgp vrf all ipv4 unicast route-leak
is not supported with `all` keyword.
Testing Done:
bl1# show bgp vrf all ipv4 unicast route-leak
Instance default:
This VRF is not importing IPv4 Unicast routes from any other VRF
This VRF is not exporting IPv4 Unicast routes to any other VRF
Instance vrf3:
This VRF is importing IPv4 Unicast routes from the following VRFs:
vrf1
Import RT(s): 144.1.1.2:10
This VRF is exporting IPv4 Unicast routes to the following VRFs:
vrf1
RD: 144.1.3.2:9
Export RT: 144.1.3.2:9
Instance vrf1:
This VRF is importing IPv4 Unicast routes from the following VRFs:
vrf3
Import RT(s): 144.1.3.2:9
This VRF is exporting IPv4 Unicast routes to the following VRFs:
vrf3
RD: 144.1.1.2:10
Export RT: 144.1.1.2:10
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Tuetuopay [Tue, 5 Mar 2019 18:19:28 +0000 (19:19 +0100)]
zebra: Treat ifaces withouth IPv4 as unnumbered
The current definition of an unnumberd interface as an interface with a
/32 IPv4 is too restrictive, especially for EVPN symmetric routing since
commit 2b83602b2 "*: Explicitly mark nexthop of EVPN-sourced routes as
onlink".
It removes the bypass check wether the nexthop is an EVPN VTEP, and
relies on the SVI to be unnumberd to bypass the gateway lookup. While
this works great if the SVI has an IP, it might not, and the test falls
flat and EVPN type 5 routes are not installed into the RIB.
Sample interface setup, where vxlan-blue is the L3VNI and br-blue the
SVI:
bgpd: Incorrect number of peers count in "show bgp ipv6 summary output
The "show bgp ipv6 summary" output displays incorrect number of peers count.
sonic# show bgp ipv6 summary
IPv6 Unicast Summary:
BGP router identifier 10.1.0.1, local AS number 65100 vrf-id 0
BGP table version 0
RIB entries 0, using 0 bytes of memory
Peers 5, using 103 KiB of memory
Peer groups 1, using 64 bytes of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
2003::1 4 65099 0 0 0 0 0 never Active
2088::1 4 65100 0 0 0 0 0 never Active
3021::2 4 65100 0 0 0 0 0 never Active
Total number of neighbors 3
sonic#
In the above output, the peers count displays as 5 but the actual peer count is 3, i.e.. 3 neighbors are activated in ipv6 unicast address family.
Displayed peer count (5) is the number of the neighbors activated in a BGP instance.
Fix : Now the peers count displays the number of neighbors activated per afi/safi.
After Fix:
sonic# show bgp ipv6 summary
IPv6 Unicast Summary:
BGP router identifier 10.1.0.1, local AS number 65100 vrf-id 0
BGP table version 0
RIB entries 0, using 0 bytes of memory
Peers 3, using 62 KiB of memory
Peer groups 1, using 64 bytes of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
2003::1 4 65099 0 0 0 0 0 never Active
2088::1 4 65100 0 0 0 0 0 never Active
3021::2 4 65100 0 0 0 0 0 never Active
projects / mirror / frr.git / log